Skip to content

L
linux
Commit d56c524a authored by Russell King's avatar Russell King
Browse files
Options

[PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfrom 

No longer maintained
parent 866237ea
Expand all Show whitespace changes
Inline Side-by-side
Showing with 2 additions and 1407 deletions
arch/arm/Kconfig
View file @ d56c524a
...@@ -704,8 +704,7 @@ source "drivers/acorn/block/Kconfig" ...@@ -704,8 +704,7 @@ source "drivers/acorn/block/Kconfig"
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
|| MACH_MP1000
source "drivers/ide/Kconfig" source "drivers/ide/Kconfig"
endif endif
......
arch/arm/boot/compressed/head.S
View file @ d56c524a
...@@ -39,8 +39,7 @@ ...@@ -39,8 +39,7 @@
defined(CONFIG_ARCH_IXP4XX) || \ defined(CONFIG_ARCH_IXP4XX) || \
defined(CONFIG_ARCH_IXP2000) || \ defined(CONFIG_ARCH_IXP2000) || \
defined(CONFIG_ARCH_LH7A40X) || \ defined(CONFIG_ARCH_LH7A40X) || \
defined(CONFIG_ARCH_OMAP) || \ defined(CONFIG_ARCH_OMAP)
defined(CONFIG_MACH_MP1000)
.macro loadsp, rb .macro loadsp, rb
addruart \rb addruart \rb
.endm .endm
......
arch/arm/configs/mp1000_defconfig deleted 100644 → 0
View file @ 866237ea
This diff is collapsed.
arch/arm/mach-clps711x/Kconfig
View file @ d56c524a
...@@ -69,17 +69,6 @@ config EP72XX_ROM_BOOT ...@@ -69,17 +69,6 @@ config EP72XX_ROM_BOOT
You almost surely want to say N here. You almost surely want to say N here.
config MACH_MP1000
bool "MACH_MP1000"
help
Say Y if you intend to run the kernel on the Comdial MP1000 platform.
config MP1000_90MHZ
bool "MP1000_90MHZ"
depends on MACH_MP1000
help
Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ
endmenu endmenu
endif endif
arch/arm/mach-clps711x/Makefile
View file @ d56c524a
...@@ -15,7 +15,6 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o ...@@ -15,7 +15,6 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o
obj-$(CONFIG_ARCH_P720T) += p720t.o obj-$(CONFIG_ARCH_P720T) += p720t.o
leds-$(CONFIG_ARCH_P720T) += p720t-leds.o leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
obj-$(CONFIG_LEDS) += $(leds-y) obj-$(CONFIG_LEDS) += $(leds-y)
arch/arm/mach-clps711x/mp1000-mach.c deleted 100644 → 0
View file @ 866237ea
/*
* linux/arch/arm/mach-mp1000/mp1000.c
*
* Copyright (C) 2005 Comdial Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/string.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/arch/mp1000-seprom.h>
#include "common.h"
extern void mp1000_map_io(void);
static void __init mp1000_init(void)
{
seprom_init();
}
MACHINE_START(MP1000, "Comdial MP1000")
/* Maintainer: Jon Ringle */
.phys_ram = 0xc0000000,
.phys_io = 0x80000000,
.io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
.boot_params = 0xc0015100,
.map_io = mp1000_map_io,
.init_irq = clps711x_init_irq,
.init_machine = mp1000_init,
.timer = &clps711x_timer,
MACHINE_END
arch/arm/mach-clps711x/mp1000-mm.c deleted 100644 → 0
View file @ 866237ea
/*
* linux/arch/arm/mach-mp1000/mm.c
*
* Extra MM routines for the MP1000
*
* Copyright (C) 2005 Comdial Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/sizes.h>
#include <asm/mach/map.h>
extern void clps711x_map_io(void);
static struct map_desc mp1000_io_desc[] __initdata = {
{ MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE },
{ MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE },
{ MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE },
{ MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE },
{ MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE },
{ MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE }
};
void __init mp1000_map_io(void)
{
clps711x_map_io();
iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc));
}
arch/arm/mach-clps711x/mp1000-seprom.c deleted 100644 → 0
View file @ 866237ea
/*`
* mp1000-seprom.c
*
* This file contains the Serial EEPROM code for the MP1000 board
*
* Copyright (C) 2005 Comdial Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/hardware/clps7111.h>
#include <asm/arch/mp1000-seprom.h>
/* If SepromInit() can initialize and checksum the seprom successfully, */
/* then it will point seprom_data_ptr at the shadow copy. */
static eeprom_struct seprom_data; /* shadow copy of seprom content */
eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */
/*
* Port D Bit 5 is Chip Select for EEPROM
* Port E Bit 0 is Input, Data out from EEPROM
* Port E Bit 1 is Output, Data in to EEPROM
* Port E Bit 2 is Output, CLK to EEPROM
*/
static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR);
static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR);
#define NO_OF_SHORTS 64 // Device is 64 x 16 bits
#define ENABLE_RW 0
#define DISABLE_RW 1
static inline void toggle_seprom_clock(void)
{
*port_e_ptr |= HwPortESepromCLK;
*port_e_ptr &= ~(HwPortESepromCLK);
}
static inline void select_eeprom(void)
{
*port_d_ptr |= HwPortDEECS;
*port_e_ptr &= ~(HwPortESepromCLK);
}
static inline void deselect_eeprom(void)
{
*port_d_ptr &= ~(HwPortDEECS);
*port_e_ptr &= ~(HwPortESepromDIn);
}
/*
* GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom
* and returns 0 if seprom is not initialized or
* has a checksum error.
*/
eeprom_struct* get_seprom_ptr(void)
{
return seprom_data_ptr;
}
unsigned char* get_eeprom_mac_address(void)
{
return seprom_data_ptr->variant.eprom_struct.mac_Address;
}
/*
* ReadSProm, Physically reads data from the Serial PROM
*/
static void read_sprom(short address, int length, eeprom_struct *buffer)
{
short data = COMMAND_READ | (address & 0x3F);
short bit;
int i;
select_eeprom();
// Clock in 9 bits of the command
for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) {
if (data & bit)
*port_e_ptr |= HwPortESepromDIn;
else
*port_e_ptr &= ~(HwPortESepromDIn);
toggle_seprom_clock();
}
//
// Now read one or more shorts of data from the Seprom
//
while (length-- > 0) {
data = 0;
// Read 16 bits at a time
for (i = 0; i < 16; i++) {
data <<= 1;
toggle_seprom_clock();
data |= *port_e_ptr & HwPortESepromDOut;
}
buffer->variant.eprom_short_data[address++] = data;
}
deselect_eeprom();
return;
}
/*
* ReadSerialPROM
*
* Input: Pointer to array of 64 x 16 Bits
*
* Output: if no problem reading data is filled in
*/
static void read_serial_prom(eeprom_struct *data)
{
read_sprom(0, 64, data);
}
//
// Compute Serial EEPROM checksum
//
// Input: Pointer to struct with Eprom data
//
// Output: The computed Eprom checksum
//
static short compute_seprom_checksum(eeprom_struct *data)
{
short checksum = 0;
int i;
for (i = 0; i < 126; i++) {
checksum += (short)data->variant.eprom_byte_data[i];
}
return((short)(0x5555 - (checksum & 0xFFFF)));
}
//
// Make sure the data port bits for the SEPROM are correctly initialised
//
void __init seprom_init(void)
{
short checksum;
// Init Port D
*(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0;
*(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15;
// Init Port E
*(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06;
*(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04;
//
// Make sure that EEPROM struct size never exceeds 128 bytes
//
if (sizeof(eeprom_struct) > 128) {
panic("Serial PROM struct size > 128, aborting read\n");
}
read_serial_prom(&seprom_data);
checksum = compute_seprom_checksum(&seprom_data);
if (checksum != seprom_data.variant.eprom_short_data[63]) {
panic("Serial EEPROM checksum failed\n");
}
seprom_data_ptr = &seprom_data;
}
drivers/serial/clps711x.c
View file @ d56c524a
...@@ -408,11 +408,7 @@ static struct uart_port clps711x_ports[UART_NR] = { ...@@ -408,11 +408,7 @@ static struct uart_port clps711x_ports[UART_NR] = {
{ {
.iobase = SYSCON1, .iobase = SYSCON1,
.irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */ .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
#ifdef CONFIG_MP1000_90MHZ
.uartclk = 4515840,
#else
.uartclk = 3686400, .uartclk = 3686400,
#endif
.fifosize = 16, .fifosize = 16,
.ops = &clps711x_pops, .ops = &clps711x_pops,
.line = 0, .line = 0,
...@@ -421,11 +417,7 @@ static struct uart_port clps711x_ports[UART_NR] = { ...@@ -421,11 +417,7 @@ static struct uart_port clps711x_ports[UART_NR] = {
{ {
.iobase = SYSCON2, .iobase = SYSCON2,
.irq = IRQ_UTXINT2, /* IRQ_URXINT2 */ .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */
#ifdef CONFIG_MP1000_90MHZ
.uartclk = 4515840,
#else
.uartclk = 3686400, .uartclk = 3686400,
#endif
.fifosize = 16, .fifosize = 16,
.ops = &clps711x_pops, .ops = &clps711x_pops,
.line = 1, .line = 1,
...@@ -559,7 +551,6 @@ console_initcall(clps711xuart_console_init); ...@@ -559,7 +551,6 @@ console_initcall(clps711xuart_console_init);
static struct uart_driver clps711x_reg = { static struct uart_driver clps711x_reg = {
.driver_name = "ttyCL", .driver_name = "ttyCL",
.dev_name = "ttyCL", .dev_name = "ttyCL",
.devfs_name = "ttyCL",
.major = SERIAL_CLPS711X_MAJOR, .major = SERIAL_CLPS711X_MAJOR,
.minor = SERIAL_CLPS711X_MINOR, .minor = SERIAL_CLPS711X_MINOR,
.nr = UART_NR, .nr = UART_NR,
......
include/asm-arm/arch-clps711x/hardware.h
View file @ d56c524a
...@@ -235,121 +235,4 @@ ...@@ -235,121 +235,4 @@
#define CEIVA_PB0_BLK_BTN (1<<0) #define CEIVA_PB0_BLK_BTN (1<<0)
#endif // #if defined (CONFIG_ARCH_CEIVA) #endif // #if defined (CONFIG_ARCH_CEIVA)
#if defined (CONFIG_MACH_MP1000)
/* NOR FLASH */
#define MP1000_NIO_BASE 0xf9000000 /* virtual */
#define MP1000_NIO_START CS0_PHYS_BASE /* physical */
#define MP1000_NIO_SIZE 0x00400000
/* DSP Interface */
#define MP1000_DSP_BASE 0xfa000000 /* virtual */
#define MP1000_DSP_START CS1_PHYS_BASE /* physical */
#define MP1000_DSP_SIZE 0x00100000
/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */
#define MP1000_LIO_BASE 0xfb000000 /* virtual */
#define MP1000_LIO_START CS2_PHYS_BASE /* physical */
#define MP1000_LIO_SIZE 0x00100000
/* NAND FLASH */
#define MP1000_FIO_BASE 0xfc000000 /* virtual */
#define MP1000_FIO_START CS3_PHYS_BASE /* physical */
#define MP1000_FIO_SIZE 0x00800000
/* Ethernet */
#define MP1000_EIO_BASE 0xfd000000 /* virtual */
#define MP1000_EIO_START CS4_PHYS_BASE /* physical */
#define MP1000_EIO_SIZE 0x00100000
#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */
#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/
#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */
#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */
/* IDE */
#define MP1000_IDE_BASE 0xfe000000 /* virtual */
#define MP1000_IDE_START CS5_PHYS_BASE /* physical */
#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */
#define IRQ_HARDDISK IRQ_EINT2
/*
* IDE registers definition
*/
#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000)
#define IDE_BASE_OFF (MP1000_IDE_BASE)
#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0)
#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2)
#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4)
#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6)
#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8)
#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa)
#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc)
#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe)
#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc)
#define IDE_IRQ IRQ_EINT2
#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2))
#define RTC_ALWAYS_BCD 0
/*
// Definitions of the bit fields in the HwPortA register for the
// MP1000 board.
*/
#define HwPortAKeyboardRow1 0x00000001
#define HwPortAKeyboardRow2 0x00000002
#define HwPortAKeyboardRow3 0x00000004
#define HwPortAKeyboardRow4 0x00000008
#define HwPortAKeyboardRow5 0x00000010
#define HwPortAKeyboardRow6 0x00000020
#define HwPortALCDEnable 0x00000040
#define HwPortAOffhook 0x00000080
/*
// Definitions of the bit fields in the HwPortB register for the
// MP1000 board.
*/
#define HwPortBL3Mode 0x00000001
#define HwPortBL3Clk 0x00000002
#define HwPortBSClk 0x00000001
#define HwPortBSData 0x00000002
#define HwPortBL3Data 0x00000004
#define HwPortBMute 0x00000008
#define HwPortBQD0 0x00000010
#define HwPortBQD1 0x00000020
#define HwPortBQD2 0x00000040
#define HwPortBQD3 0x00000080
/*
// Definitions of the bit fields in the HwPortD register for the
// MP1000 board.
*/
#define HwPortDLED1 0x00000001
#define HwPortDLED2 0x00000002
#define HwPortDLED3 0x00000004
#define HwPortDLED4 0x00000008
#define HwPortDLED5 0x00000010
#define HwPortDEECS 0x00000020
#define HwPortBRTS 0x00000040
#define HwPortBRI 0x00000080
/*
// Definitions of the bit fields in the HwPortE register for the
// MP1000 board.
*/
#define HwPortECLE 0x00000001
#define HwPortESepromDOut 0x00000001
#define HwPortEALE 0x00000002
#define HwPortESepromDIn 0x00000002
#define HwPortENANDCS 0x00000004
#define HwPortESepromCLK 0x00000004
#endif // #if defined (CONFIG_MACH_MP1000)
#endif #endif
include/asm-arm/arch-clps711x/mp1000-seprom.h deleted 100644 → 0
View file @ 866237ea
#ifndef MP1000_SEPROM_H
#define MP1000_SEPROM_H
/*
* mp1000-seprom.h
*
*
* This file contains the Serial EEPROM definitions for the MP1000 board
*
* Copyright (C) 2005 Comdial Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#define COMMAND_ERASE (0x1C0)
#define COMMAND_ERASE_ALL (0x120)
#define COMMAND_WRITE_DISABLE (0x100)
#define COMMAND_WRITE_ENABLE (0x130)
#define COMMAND_READ (0x180)
#define COMMAND_WRITE (0x140)
#define COMMAND_WRITE_ALL (0x110)
//
// Serial EEPROM data format
//
#define PACKED __attribute__ ((packed))
typedef struct _EEPROM {
union {
unsigned char eprom_byte_data[128];
unsigned short eprom_short_data[64];
struct {
unsigned char version PACKED; // EEPROM Version "1" for now
unsigned char box_id PACKED; // Box ID (Standalone, SOHO, embedded, etc)
unsigned char major_hw_version PACKED; // Major Hardware version (Hex)
unsigned char minor_hw_version PACKED; // Minor Hardware Version (Hex)
unsigned char mfg_id[3] PACKED; // Manufacturer ID (3 character Alphabetic)
unsigned char mfg_serial_number[10] PACKED; // Manufacturer Serial number
unsigned char mfg_date[3] PACKED; // Date of Mfg (Formatted YY:MM:DD)
unsigned char country PACKED; // Country of deployment
unsigned char mac_Address[6] PACKED; // MAC Address
unsigned char oem_string[20] PACKED; // OEM ID string
unsigned short feature_bits1 PACKED; // Feature Bits 1
unsigned short feature_bits2 PACKED; // Feature Bits 2
unsigned char filler[75] PACKED; // Unused/Undefined 0 initialized
unsigned short checksum PACKED; // byte accumulated short checksum
} eprom_struct;
} variant;
} eeprom_struct;
/* These settings must be mutually exclusive */
#define FEATURE_BITS1_DRAMSIZE_16MEG 0x0001 /* 0 signifies 4 MEG system */
#define FEATURE_BITS1_DRAMSIZE_8MEG 0x0002 /* 1 in bit 1 = 8MEG system */
#define FEATURE_BITS1_DRAMSIZE_64MEG 0x0004 /* 1 in bit 2 = 64MEG system */
#define FEATURE_BITS1_CPUIS90MEG 0x0010
extern void seprom_init(void);
extern eeprom_struct* get_seprom_ptr(void);
extern unsigned char* get_eeprom_mac_address(void);
#endif /* MP1000_SEPROM_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7