SERIAL: AR933X: Add driver for the built-in UART of the SoC

This patch adds the driver for the built-in UART of the
Atheros AR933X SoCs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R.  Rodriguez" <rodrigue@qca.qualcomm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-serial@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2526/Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h

+/*
+ *  Platform data definition for Atheros AR933X UART
+ *
+ *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR933X_UART_PLATFORM_H
+#define _AR933X_UART_PLATFORM_H
+
+struct ar933x_uart_platform_data {
+	unsigned	uartclk;
+};
+
+#endif /* _AR933X_UART_PLATFORM_H */

drivers/tty/serial/Kconfig

@@ -1610,4 +1610,27 @@ config SERIAL_XILINX_PS_UART_CONSOLE
 	help
 	  Enable a Xilinx PS UART port to be the system console.
 
+config SERIAL_AR933X
+	bool "AR933X serial port support"
+	depends on SOC_AR933X
+	select SERIAL_CORE
+	help
+	  If you have an Atheros AR933X SOC based board and want to use the
+	  built-in UART of the SoC, say Y to this option.
+
+config SERIAL_AR933X_CONSOLE
+	bool "Console on AR933X serial port"
+	depends on SERIAL_AR933X=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  Enable a built-in UART port of the AR933X to be the system console.
+
+config SERIAL_AR933X_NR_UARTS
+	int "Maximum number of AR933X serial ports"
+	depends on SERIAL_AR933X
+	default "2"
+	help
+	  Set this to the number of serial ports you want the driver
+	  to support.
+
 endmenu

drivers/tty/serial/Makefile

@@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_MSM_SMD)	+= msm_smd_tty.o
 obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
 obj-$(CONFIG_SERIAL_LANTIQ)	+= lantiq.o
 obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
+obj-$(CONFIG_SERIAL_AR933X)   += ar933x_uart.o

include/linux/serial_core.h

@@ -207,6 +207,10 @@
 /* Xilinx PSS UART */
 #define PORT_XUARTPS	98
 
+/* Atheros AR933X SoC */
+#define PORT_AR933X	99
+
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>