Documentation: usb: ECM function testing

Summary of how to test ECM function of USB gadget.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Documentation/usb/gadget-testing.txt

@@ -2,6 +2,7 @@ This file summarizes information on basic testing of USB functions
 provided by gadgets.
 
 1. ACM function
+2. ECM function
 
 
 1. ACM function
@@ -32,3 +33,36 @@ then the other way round
 
 On the device: cat > /dev/ttyGS<Y>
 On the host: cat /dev/ttyACM<X>
+
+2. ECM function
+===============
+
+The function is provided by usb_f_ecm.ko module.
+
+Function-specific configfs interface
+------------------------------------
+
+The function name to use when creating the function directory is "ecm".
+The ECM function provides these attributes in its function directory:
+
+	ifname		- network device interface name associated with this
+			function instance
+	qmult		- queue length multiplier for high and super speed
+	host_addr	- MAC address of host's end of this
+			Ethernet over USB link
+	dev_addr	- MAC address of device's end of this
+			Ethernet over USB link
+
+and after creating the functions/ecm.<instance name> they contain default
+values: qmult is 5, dev_addr and host_addr are randomly selected.
+Except for ifname they can be written to until the function is linked to a
+configuration. The ifname is read-only and contains the name of the interface
+which was assigned by the net core, e. g. usb0.
+
+Testing the ECM function
+------------------------
+
+Configure IP addresses of the device and the host. Then:
+
+On the device: ping <host's IP>
+On the host: ping <device's IP>