Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha

Pull alpha updates from Matt Turner:
 "It contains a few fixes and some work from Richard to make alpha
  emulation under QEMU much more usable"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: Prevent a NULL ptr dereference in csum_partial_copy.
  alpha: perf: fix out-of-bounds array access triggered from raw event
  alpha: Use qemu+cserve provided high-res clock and alarm.
  alpha: Switch to GENERIC_CLOCKEVENTS
  alpha: Enable the rpcc clocksource for single processor
  alpha: Reorganize rtc handling
  alpha: Primitive support for CPU power down.
  alpha: Allow HZ to be configured
  alpha: Notice if we're being run under QEMU
  alpha: Eliminate compiler warning from memset macro

arch/alpha/Kconfig

@@ -16,8 +16,8 @@ config ALPHA
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_CMOS_UPDATE
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HAVE_MOD_ARCH_SPECIFIC
@@ -488,6 +488,20 @@ config VGA_HOSE
 	  which always have multiple hoses, and whose consoles support it.
 
 
+config ALPHA_QEMU
+	bool "Run under QEMU emulation"
+	depends on !ALPHA_GENERIC
+	---help---
+	  Assume the presence of special features supported by QEMU PALcode
+	  that reduce the overhead of system emulation.
+
+	  Generic kernels will auto-detect QEMU.  But when building a
+	  system-specific kernel, the assumption is that we want to
+	  elimiate as many runtime tests as possible.
+
+	  If unsure, say N.
+
+
 config ALPHA_SRM
 	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
 	depends on TTY
@@ -572,6 +586,30 @@ config NUMA
 	  Access).  This option is for configuring high-end multiprocessor
 	  server machines.  If in doubt, say N.
 
+config ALPHA_WTINT
+	bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
+	default y if ALPHA_QEMU
+	default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
+	default n if !ALPHA_SRM && !ALPHA_GENERIC
+	default y if SMP
+	---help---
+	  The Wait for Interrupt (WTINT) PALcall attempts to place the CPU
+	  to sleep until the next interrupt.  This may reduce the power
+	  consumed, and the heat produced by the computer.  However, it has
+	  the side effect of making the cycle counter unreliable as a timing
+	  device across the sleep.
+
+	  For emulation under QEMU, definitely say Y here, as we have other
+	  mechanisms for measuring time than the cycle counter.
+
+	  For EV4 (but not LCA), EV5 and EV56 systems, or for systems running
+	  MILO, sleep mode is not supported so you might as well say N here.
+
+	  For SMP systems we cannot use the cycle counter for timing anyway,
+	  so you might as well say Y here.
+
+	  If unsure, say N.
+
 config NODES_SHIFT
 	int
 	default "7"
@@ -613,9 +651,41 @@ config VERBOSE_MCHECK_ON
 
 	  Take the default (1) unless you want more control or more info.
 
+choice
+	prompt "Timer interrupt frequency (HZ)?"
+	default HZ_128 if ALPHA_QEMU
+	default HZ_1200 if ALPHA_RAWHIDE
+	default HZ_1024
+	---help---
+	  The frequency at which timer interrupts occur.  A high frequency
+	  minimizes latency, whereas a low frequency minimizes overhead of
+	  process accounting.  The later effect is especially significant
+	  when being run under QEMU.
+
+	  Note that some Alpha hardware cannot change the interrupt frequency
+	  of the timer.  If unsure, say 1024 (or 1200 for Rawhide).
+
+	config HZ_32
+		bool "32 Hz"
+	config HZ_64
+		bool "64 Hz"
+	config HZ_128
+		bool "128 Hz"
+	config HZ_256
+		bool "256 Hz"
+	config HZ_1024
+		bool "1024 Hz"
+	config HZ_1200
+		bool "1200 Hz"
+endchoice
+
 config HZ
-	int
-	default 1200 if ALPHA_RAWHIDE
+	int 
+	default 32 if HZ_32
+	default 64 if HZ_64
+	default 128 if HZ_128
+	default 256 if HZ_256
+	default 1200 if HZ_1200
 	default 1024
 
 source "drivers/pci/Kconfig"

arch/alpha/include/asm/machvec.h

@@ -33,6 +33,7 @@ struct alpha_machine_vector
 
 	int nr_irqs;
 	int rtc_port;
+	int rtc_boot_cpu_only;
 	unsigned int max_asn;
 	unsigned long max_isa_dma_address;
 	unsigned long irq_probe_mask;
@@ -95,9 +96,6 @@ struct alpha_machine_vector
 
 	struct _alpha_agp_info *(*agp_info)(void);
 
-	unsigned int (*rtc_get_time)(struct rtc_time *);
-	int (*rtc_set_time)(struct rtc_time *);
-
 	const char *vector_name;
 
 	/* NUMA information */
@@ -126,13 +124,19 @@ extern struct alpha_machine_vector alpha_mv;
 
 #ifdef CONFIG_ALPHA_GENERIC
 extern int alpha_using_srm;
+extern int alpha_using_qemu;
 #else
-#ifdef CONFIG_ALPHA_SRM
-#define alpha_using_srm 1
-#else
-#define alpha_using_srm 0
-#endif
+# ifdef CONFIG_ALPHA_SRM
+#  define alpha_using_srm 1
+# else
+#  define alpha_using_srm 0
+# endif
+# ifdef CONFIG_ALPHA_QEMU
+#  define alpha_using_qemu 1
+# else
+#  define alpha_using_qemu 0
+# endif
 #endif /* GENERIC */
 
-#endif
+#endif /* __KERNEL__ */
 #endif /* __ALPHA_MACHVEC_H */

arch/alpha/include/asm/pal.h

@@ -89,6 +89,7 @@ __CALL_PAL_W1(wrmces, unsigned long);
 __CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long);
 __CALL_PAL_W1(wrusp, unsigned long);
 __CALL_PAL_W1(wrvptptr, unsigned long);
+__CALL_PAL_RW1(wtint, unsigned long, unsigned long);
 
 /*
  * TB routines..
@@ -111,5 +112,75 @@ __CALL_PAL_W1(wrvptptr, unsigned long);
 #define tbiap()		__tbi(-1, /* no second argument */)
 #define tbia()		__tbi(-2, /* no second argument */)
 
+/*
+ * QEMU Cserv routines..
+ */
+
+static inline unsigned long
+qemu_get_walltime(void)
+{
+	register unsigned long v0 __asm__("$0");
+	register unsigned long a0 __asm__("$16") = 3;
+
+	asm("call_pal %2 # cserve get_time"
+	    : "=r"(v0), "+r"(a0)
+	    : "i"(PAL_cserve)
+	    : "$17", "$18", "$19", "$20", "$21");
+
+	return v0;
+}
+
+static inline unsigned long
+qemu_get_alarm(void)
+{
+	register unsigned long v0 __asm__("$0");
+	register unsigned long a0 __asm__("$16") = 4;
+
+	asm("call_pal %2 # cserve get_alarm"
+	    : "=r"(v0), "+r"(a0)
+	    : "i"(PAL_cserve)
+	    : "$17", "$18", "$19", "$20", "$21");
+
+	return v0;
+}
+
+static inline void
+qemu_set_alarm_rel(unsigned long expire)
+{
+	register unsigned long a0 __asm__("$16") = 5;
+	register unsigned long a1 __asm__("$17") = expire;
+
+	asm volatile("call_pal %2 # cserve set_alarm_rel"
+		     : "+r"(a0), "+r"(a1)
+		     : "i"(PAL_cserve)
+		     : "$0", "$18", "$19", "$20", "$21");
+}
+
+static inline void
+qemu_set_alarm_abs(unsigned long expire)
+{
+	register unsigned long a0 __asm__("$16") = 6;
+	register unsigned long a1 __asm__("$17") = expire;
+
+	asm volatile("call_pal %2 # cserve set_alarm_abs"
+		     : "+r"(a0), "+r"(a1)
+		     : "i"(PAL_cserve)
+		     : "$0", "$18", "$19", "$20", "$21");
+}
+
+static inline unsigned long
+qemu_get_vmtime(void)
+{
+	register unsigned long v0 __asm__("$0");
+	register unsigned long a0 __asm__("$16") = 7;
+
+	asm("call_pal %2 # cserve get_time"
+	    : "=r"(v0), "+r"(a0)
+	    : "i"(PAL_cserve)
+	    : "$17", "$18", "$19", "$20", "$21");
+
+	return v0;
+}
+
 #endif /* !__ASSEMBLY__ */
 #endif /* __ALPHA_PAL_H */

arch/alpha/include/asm/rtc.h

-#ifndef _ALPHA_RTC_H
-#define _ALPHA_RTC_H
-
-#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \
- || defined(CONFIG_ALPHA_GENERIC)
-# define get_rtc_time		alpha_mv.rtc_get_time
-# define set_rtc_time		alpha_mv.rtc_set_time
-#endif
-
 #include <asm-generic/rtc.h>
-
-#endif

arch/alpha/include/asm/string.h

@@ -22,15 +22,27 @@ extern void * __memcpy(void *, const void *, size_t);
 
 #define __HAVE_ARCH_MEMSET
 extern void * __constant_c_memset(void *, unsigned long, size_t);
+extern void * ___memset(void *, int, size_t);
 extern void * __memset(void *, int, size_t);
 extern void * memset(void *, int, size_t);
 
-#define memset(s, c, n)							    \
-(__builtin_constant_p(c)						    \
- ? (__builtin_constant_p(n) && (c) == 0					    \
-    ? __builtin_memset((s),0,(n)) 					    \
-    : __constant_c_memset((s),0x0101010101010101UL*(unsigned char)(c),(n))) \
- : __memset((s),(c),(n)))
+/* For gcc 3.x, we cannot have the inline function named "memset" because
+   the __builtin_memset will attempt to resolve to the inline as well,
+   leading to a "sorry" about unimplemented recursive inlining.  */
+extern inline void *__memset(void *s, int c, size_t n)
+{
+	if (__builtin_constant_p(c)) {
+		if (__builtin_constant_p(n)) {
+			return __builtin_memset(s, c, n);
+		} else {
+			unsigned long c8 = (c & 0xff) * 0x0101010101010101UL;
+			return __constant_c_memset(s, c8, n);
+		}
+	}
+	return ___memset(s, c, n);
+}
+
+#define memset __memset
 
 #define __HAVE_ARCH_STRCPY
 extern char * strcpy(char *,const char *);

arch/alpha/include/uapi/asm/pal.h

@@ -46,6 +46,7 @@
 #define PAL_rdusp	58
 #define PAL_whami	60
 #define PAL_retsys	61
+#define PAL_wtint	62
 #define PAL_rti		63
 
 

arch/alpha/kernel/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_PCI)	+= pci.o pci_iommu.o pci-sysfs.o
 obj-$(CONFIG_SRM_ENV)	+= srm_env.o
 obj-$(CONFIG_MODULES)	+= module.o
 obj-$(CONFIG_PERF_EVENTS) += perf_event.o
+obj-$(CONFIG_RTC_DRV_ALPHA) += rtc.o
 
 ifdef CONFIG_ALPHA_GENERIC
 

arch/alpha/kernel/alpha_ksyms.c

@@ -40,6 +40,7 @@ EXPORT_SYMBOL(strrchr);
 EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(__memcpy);
 EXPORT_SYMBOL(__memset);
+EXPORT_SYMBOL(___memset);
 EXPORT_SYMBOL(__memsetw);
 EXPORT_SYMBOL(__constant_c_memset);
 EXPORT_SYMBOL(copy_page);

arch/alpha/kernel/irq_alpha.c

@@ -66,21 +66,7 @@ do_entInt(unsigned long type, unsigned long vector,
 		break;
 	case 1:
 		old_regs = set_irq_regs(regs);
-#ifdef CONFIG_SMP
-	  {
-		long cpu;
-
-		smp_percpu_timer_interrupt(regs);
-		cpu = smp_processor_id();
-		if (cpu != boot_cpuid) {
-		        kstat_incr_irqs_this_cpu(RTC_IRQ, irq_to_desc(RTC_IRQ));
-		} else {
-			handle_irq(RTC_IRQ);
-		}
-	  }
-#else
 		handle_irq(RTC_IRQ);
-#endif
 		set_irq_regs(old_regs);
 		return;
 	case 2:
@@ -228,7 +214,7 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
  */
 
 struct irqaction timer_irqaction = {
-	.handler	= timer_interrupt,
+	.handler	= rtc_timer_interrupt,
 	.name		= "timer",
 };
 

arch/alpha/kernel/machvec_impl.h

@@ -43,10 +43,7 @@
 #define CAT1(x,y)  x##y
 #define CAT(x,y)   CAT1(x,y)
 
-#define DO_DEFAULT_RTC \
-	.rtc_port = 0x70, \
-	.rtc_get_time = common_get_rtc_time, \
-	.rtc_set_time = common_set_rtc_time
+#define DO_DEFAULT_RTC			.rtc_port = 0x70
 
 #define DO_EV4_MMU							\
 	.max_asn =			EV4_MAX_ASN,			\

arch/alpha/kernel/perf_event.c

@@ -83,6 +83,8 @@ struct alpha_pmu_t {
 	long pmc_left[3];
 	 /* Subroutine for allocation of PMCs.  Enforces constraints. */
 	int (*check_constraints)(struct perf_event **, unsigned long *, int);
+	/* Subroutine for checking validity of a raw event for this PMU. */
+	int (*raw_event_valid)(u64 config);
 };
 
 /*
@@ -203,6 +205,12 @@ static int ev67_check_constraints(struct perf_event **event,
 }
 
 
+static int ev67_raw_event_valid(u64 config)
+{
+	return config >= EV67_CYCLES && config < EV67_LAST_ET;
+};
+
+
 static const struct alpha_pmu_t ev67_pmu = {
 	.event_map = ev67_perfmon_event_map,
 	.max_events = ARRAY_SIZE(ev67_perfmon_event_map),
@@ -211,7 +219,8 @@ static const struct alpha_pmu_t ev67_pmu = {
 	.pmc_count_mask = {EV67_PCTR_0_COUNT_MASK,  EV67_PCTR_1_COUNT_MASK,  0},
 	.pmc_max_period = {(1UL<<20) - 1, (1UL<<20) - 1, 0},
 	.pmc_left = {16, 4, 0},
-	.check_constraints = ev67_check_constraints
+	.check_constraints = ev67_check_constraints,
+	.raw_event_valid = ev67_raw_event_valid,
 };
 
 
@@ -609,7 +618,9 @@ static int __hw_perf_event_init(struct perf_event *event)
 	} else if (attr->type == PERF_TYPE_HW_CACHE) {
 		return -EOPNOTSUPP;
 	} else if (attr->type == PERF_TYPE_RAW) {
-		ev = attr->config & 0xff;
+		if (!alpha_pmu->raw_event_valid(attr->config))
+			return -EINVAL;
+		ev = attr->config;
 	} else {
 		return -EOPNOTSUPP;
 	}

arch/alpha/kernel/process.c

@@ -46,6 +46,23 @@
 void (*pm_power_off)(void) = machine_power_off;
 EXPORT_SYMBOL(pm_power_off);
 
+#ifdef CONFIG_ALPHA_WTINT
+/*
+ * Sleep the CPU.
+ * EV6, LCA45 and QEMU know how to power down, skipping N timer interrupts.
+ */
+void arch_cpu_idle(void)
+{
+	wtint(0);
+	local_irq_enable();
+}
+
+void arch_cpu_idle_dead(void)
+{
+	wtint(INT_MAX);
+}
+#endif /* ALPHA_WTINT */
+
 struct halt_info {
 	int mode;
 	char *restart_cmd;

arch/alpha/kernel/proto.h

@@ -135,17 +135,15 @@ extern void unregister_srm_console(void);
 /* smp.c */
 extern void setup_smp(void);
 extern void handle_ipi(struct pt_regs *);
-extern void smp_percpu_timer_interrupt(struct pt_regs *);
 
 /* bios32.c */
 /* extern void reset_for_srm(void); */
 
 /* time.c */
-extern irqreturn_t timer_interrupt(int irq, void *dev);
+extern irqreturn_t rtc_timer_interrupt(int irq, void *dev);
+extern void init_clockevent(void);
 extern void common_init_rtc(void);
 extern unsigned long est_cycle_freq;
-extern unsigned int common_get_rtc_time(struct rtc_time *time);
-extern int common_set_rtc_time(struct rtc_time *time);
 
 /* smc37c93x.c */
 extern void SMC93x_Init(void);

arch/alpha/kernel/rtc.c

+/*
+ *  linux/arch/alpha/kernel/rtc.c
+ *
+ *  Copyright (C) 1991, 1992, 1995, 1999, 2000  Linus Torvalds
+ *
+ * This file contains date handling.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include <asm/rtc.h>
+
+#include "proto.h"
+
+
+/*
+ * Support for the RTC device.
+ *
+ * We don't want to use the rtc-cmos driver, because we don't want to support
+ * alarms, as that would be indistinguishable from timer interrupts.
+ *
+ * Further, generic code is really, really tied to a 1900 epoch.  This is
+ * true in __get_rtc_time as well as the users of struct rtc_time e.g.
+ * rtc_tm_to_time.  Thankfully all of the other epochs in use are later
+ * than 1900, and so it's easy to adjust.
+ */
+
+static unsigned long rtc_epoch;
+
+static int __init
+specifiy_epoch(char *str)
+{
+	unsigned long epoch = simple_strtoul(str, NULL, 0);
+	if (epoch < 1900)
+		printk("Ignoring invalid user specified epoch %lu\n", epoch);
+	else
+		rtc_epoch = epoch;
+	return 1;
+}
+__setup("epoch=", specifiy_epoch);
+
+static void __init
+init_rtc_epoch(void)
+{
+	int epoch, year, ctrl;
+
+	if (rtc_epoch != 0) {
+		/* The epoch was specified on the command-line.  */
+		return;
+	}
+
+	/* Detect the epoch in use on this computer.  */
+	ctrl = CMOS_READ(RTC_CONTROL);
+	year = CMOS_READ(RTC_YEAR);
+	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		year = bcd2bin(year);
+
+	/* PC-like is standard; used for year >= 70 */
+	epoch = 1900;
+	if (year < 20) {
+		epoch = 2000;
+	} else if (year >= 20 && year < 48) {
+		/* NT epoch */
+		epoch = 1980;
+	} else if (year >= 48 && year < 70) {
+		/* Digital UNIX epoch */
+		epoch = 1952;
+	}
+	rtc_epoch = epoch;
+
+	printk(KERN_INFO "Using epoch %d for rtc year %d\n", epoch, year);
+}
+
+static int
+alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	__get_rtc_time(tm);
+
+	/* Adjust for non-default epochs.  It's easier to depend on the
+	   generic __get_rtc_time and adjust the epoch here than create
+	   a copy of __get_rtc_time with the edits we need.  */
+	if (rtc_epoch != 1900) {
+		int year = tm->tm_year;
+		/* Undo the century adjustment made in __get_rtc_time.  */
+		if (year >= 100)
+			year -= 100;
+		year += rtc_epoch - 1900;
+		/* Redo the century adjustment with the epoch in place.  */
+		if (year <= 69)
+			year += 100;
+		tm->tm_year = year;
+	}
+
+	return rtc_valid_tm(tm);
+}
+
+static int
+alpha_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rtc_time xtm;
+
+	if (rtc_epoch != 1900) {
+		xtm = *tm;
+		xtm.tm_year -= rtc_epoch - 1900;
+		tm = &xtm;
+	}
+
+	return __set_rtc_time(tm);
+}
+
+static int
+alpha_rtc_set_mmss(struct device *dev, unsigned long nowtime)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+	unsigned char save_control, save_freq_select;
+
+	/* Note: This code only updates minutes and seconds.  Comments
+	   indicate this was to avoid messing with unknown time zones,
+	   and with the epoch nonsense described above.  In order for
+	   this to work, the existing clock cannot be off by more than
+	   15 minutes.
+
+	   ??? This choice is may be out of date.  The x86 port does
+	   not have problems with timezones, and the epoch processing has
+	   now been fixed in alpha_set_rtc_time.
+
+	   In either case, one can always force a full rtc update with
+	   the userland hwclock program, so surely 15 minute accuracy
+	   is no real burden.  */
+
+	/* In order to set the CMOS clock precisely, we have to be called
+	   500 ms after the second nowtime has started, because when
+	   nowtime is written into the registers of the CMOS clock, it will
+	   jump to the next second precisely 500 ms later. Check the Motorola
+	   MC146818A or Dallas DS12887 data sheet for details.  */
+
+	/* irq are locally disabled here */
+	spin_lock(&rtc_lock);
+	/* Tell the clock it's being set */
+	save_control = CMOS_READ(RTC_CONTROL);
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+	/* Stop and reset prescaler */
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+	cmos_minutes = CMOS_READ(RTC_MINUTES);
+	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		cmos_minutes = bcd2bin(cmos_minutes);
+
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1) {
+		/* correct for half hour time zone */
+		real_minutes += 30;
+	}
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+			real_seconds = bin2bcd(real_seconds);
+			real_minutes = bin2bcd(real_minutes);
+		}
+		CMOS_WRITE(real_seconds,RTC_SECONDS);
+		CMOS_WRITE(real_minutes,RTC_MINUTES);
+	} else {
+		printk_once(KERN_NOTICE
+			    "set_rtc_mmss: can't update from %d to %d\n",
+			    cmos_minutes, real_minutes);
+		retval = -1;
+	}
+
+	/* The following flags have to be released exactly in this order,
+	 * otherwise the DS12887 (popular MC146818A clone with integrated
+	 * battery and quartz) will not reset the oscillator and will not
+	 * update precisely 500 ms later. You won't find this mentioned in
+	 * the Dallas Semiconductor data sheets, but who believes data
+	 * sheets anyway ...                           -- Markus Kuhn
+	 */
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+	spin_unlock(&rtc_lock);
+
+	return retval;
+}
+
+static int
+alpha_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case RTC_EPOCH_READ:
+		return put_user(rtc_epoch, (unsigned long __user *)arg);
+	case RTC_EPOCH_SET:
+		if (arg < 1900)
+			return -EINVAL;
+		rtc_epoch = arg;
+		return 0;
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+static const struct rtc_class_ops alpha_rtc_ops = {
+	.read_time = alpha_rtc_read_time,
+	.set_time = alpha_rtc_set_time,
+	.set_mmss = alpha_rtc_set_mmss,
+	.ioctl = alpha_rtc_ioctl,
+};
+
+/*
+ * Similarly, except do the actual CMOS access on the boot cpu only.
+ * This requires marshalling the data across an interprocessor call.
+ */
+
+#if defined(CONFIG_SMP) && \
+    (defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_MARVEL))
+# define HAVE_REMOTE_RTC 1
+
+union remote_data {
+	struct rtc_time *tm;
+	unsigned long now;
+	long retval;
+};
+
+static void
+do_remote_read(void *data)
+{
+	union remote_data *x = data;
+	x->retval = alpha_rtc_read_time(NULL, x->tm);
+}
+
+static int
+remote_read_time(struct device *dev, struct rtc_time *tm)
+{
+	union remote_data x;
+	if (smp_processor_id() != boot_cpuid) {
+		x.tm = tm;
+		smp_call_function_single(boot_cpuid, do_remote_read, &x, 1);
+		return x.retval;
+	}
+	return alpha_rtc_read_time(NULL, tm);
+}
+
+static void
+do_remote_set(void *data)
+{
+	union remote_data *x = data;
+	x->retval = alpha_rtc_set_time(NULL, x->tm);
+}
+
+static int
+remote_set_time(struct device *dev, struct rtc_time *tm)
+{
+	union remote_data x;
+	if (smp_processor_id() != boot_cpuid) {
+		x.tm = tm;
+		smp_call_function_single(boot_cpuid, do_remote_set, &x, 1);
+		return x.retval;
+	}
+	return alpha_rtc_set_time(NULL, tm);
+}
+
+static void
+do_remote_mmss(void *data)
+{
+	union remote_data *x = data;
+	x->retval = alpha_rtc_set_mmss(NULL, x->now);
+}
+
+static int
+remote_set_mmss(struct device *dev, unsigned long now)
+{
+	union remote_data x;
+	if (smp_processor_id() != boot_cpuid) {
+		x.now = now;
+		smp_call_function_single(boot_cpuid, do_remote_mmss, &x, 1);
+		return x.retval;
+	}
+	return alpha_rtc_set_mmss(NULL, now);
+}
+
+static const struct rtc_class_ops remote_rtc_ops = {
+	.read_time = remote_read_time,
+	.set_time = remote_set_time,
+	.set_mmss = remote_set_mmss,
+	.ioctl = alpha_rtc_ioctl,
+};
+#endif
+
+static int __init
+alpha_rtc_init(void)
+{
+	const struct rtc_class_ops *ops;
+	struct platform_device *pdev;
+	struct rtc_device *rtc;
+	const char *name;
+
+	init_rtc_epoch();
+	name = "rtc-alpha";
+	ops = &alpha_rtc_ops;
+
+#ifdef HAVE_REMOTE_RTC
+	if (alpha_mv.rtc_boot_cpu_only)
+		ops = &remote_rtc_ops;
+#endif
+
+	pdev = platform_device_register_simple(name, -1, NULL, 0);
+	rtc = devm_rtc_device_register(&pdev->dev, name, ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	platform_set_drvdata(pdev, rtc);
+	return 0;
+}
+device_initcall(alpha_rtc_init);

arch/alpha/kernel/setup.c

@@ -115,10 +115,17 @@ unsigned long alpha_agpgart_size = DEFAULT_AGP_APER_SIZE;
 
 #ifdef CONFIG_ALPHA_GENERIC
 struct alpha_machine_vector alpha_mv;
+#endif
+
+#ifndef alpha_using_srm
 int alpha_using_srm;
 EXPORT_SYMBOL(alpha_using_srm);
 #endif
 
+#ifndef alpha_using_qemu
+int alpha_using_qemu;
+#endif
+
 static struct alpha_machine_vector *get_sysvec(unsigned long, unsigned long,
 					       unsigned long);
 static struct alpha_machine_vector *get_sysvec_byname(const char *);
@@ -529,11 +536,15 @@ setup_arch(char **cmdline_p)
 	atomic_notifier_chain_register(&panic_notifier_list,
 			&alpha_panic_block);
 
-#ifdef CONFIG_ALPHA_GENERIC
+#ifndef alpha_using_srm
 	/* Assume that we've booted from SRM if we haven't booted from MILO.
 	   Detect the later by looking for "MILO" in the system serial nr.  */
 	alpha_using_srm = strncmp((const char *)hwrpb->ssn, "MILO", 4) != 0;
 #endif
+#ifndef alpha_using_qemu
+	/* Similarly, look for QEMU.  */
+	alpha_using_qemu = strstr((const char *)hwrpb->ssn, "QEMU") != 0;
+#endif
 
 	/* If we are using SRM, we want to allow callbacks
 	   as early as possible, so do this NOW, and then
@@ -1207,6 +1218,7 @@ show_cpuinfo(struct seq_file *f, void *slot)
 	char *systype_name;
 	char *sysvariation_name;
 	int nr_processors;
+	unsigned long timer_freq;
 
 	cpu_index = (unsigned) (cpu->type - 1);
 	cpu_name = "Unknown";
@@ -1218,6 +1230,12 @@ show_cpuinfo(struct seq_file *f, void *slot)
 
 	nr_processors = get_nr_processors(cpu, hwrpb->nr_processors);
 
+#if CONFIG_HZ == 1024 || CONFIG_HZ == 1200
+	timer_freq = (100UL * hwrpb->intr_freq) / 4096;
+#else
+	timer_freq = 100UL * CONFIG_HZ;
+#endif
+
 	seq_printf(f, "cpu\t\t\t: Alpha\n"
 		      "cpu model\t\t: %s\n"
 		      "cpu variation\t\t: %ld\n"
@@ -1243,8 +1261,7 @@ show_cpuinfo(struct seq_file *f, void *slot)
 		       (char*)hwrpb->ssn,
 		       est_cycle_freq ? : hwrpb->cycle_freq,
 		       est_cycle_freq ? "est." : "",
-		       hwrpb->intr_freq / 4096,
-		       (100 * hwrpb->intr_freq / 4096) % 100,
+		       timer_freq / 100, timer_freq % 100,
 		       hwrpb->pagesize,
 		       hwrpb->pa_bits,
 		       hwrpb->max_asn,

arch/alpha/kernel/smp.c

@@ -138,9 +138,11 @@ smp_callin(void)
 
 	/* Get our local ticker going. */
 	smp_setup_percpu_timer(cpuid);
+	init_clockevent();
 
 	/* Call platform-specific callin, if specified */
-	if (alpha_mv.smp_callin) alpha_mv.smp_callin();
+	if (alpha_mv.smp_callin)
+		alpha_mv.smp_callin();
 
 	/* All kernel threads share the same mm context.  */
 	atomic_inc(&init_mm.mm_count);
@@ -498,35 +500,6 @@ smp_cpus_done(unsigned int max_cpus)
 	       ((bogosum + 2500) / (5000/HZ)) % 100);
 }
 
-
-void
-smp_percpu_timer_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-	int cpu = smp_processor_id();
-	unsigned long user = user_mode(regs);
-	struct cpuinfo_alpha *data = &cpu_data[cpu];
-
-	old_regs = set_irq_regs(regs);
-
-	/* Record kernel PC.  */
-	profile_tick(CPU_PROFILING);
-
-	if (!--data->prof_counter) {
-		/* We need to make like a normal interrupt -- otherwise
-		   timer interrupts ignore the global interrupt lock,
-		   which would be a Bad Thing.  */
-		irq_enter();
-
-		update_process_times(user);
-
-		data->prof_counter = data->prof_multiplier;
-
-		irq_exit();
-	}
-	set_irq_regs(old_regs);
-}
-
 int
 setup_profiling_timer(unsigned int multiplier)
 {

arch/alpha/kernel/sys_jensen.c

@@ -224,8 +224,6 @@ struct alpha_machine_vector jensen_mv __initmv = {
 	.machine_check		= jensen_machine_check,
 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
 	.rtc_port		= 0x170,
-	.rtc_get_time		= common_get_rtc_time,
-	.rtc_set_time		= common_set_rtc_time,
 
 	.nr_irqs		= 16,
 	.device_interrupt	= jensen_device_interrupt,

arch/alpha/kernel/sys_marvel.c

@@ -22,7 +22,6 @@
 #include <asm/hwrpb.h>
 #include <asm/tlbflush.h>
 #include <asm/vga.h>
-#include <asm/rtc.h>
 
 #include "proto.h"
 #include "err_impl.h"
@@ -400,57 +399,6 @@ marvel_init_rtc(void)
 	init_rtc_irq();
 }
 
-struct marvel_rtc_time {
-	struct rtc_time *time;
-	int retval;
-};
-
-#ifdef CONFIG_SMP
-static void
-smp_get_rtc_time(void *data)
-{
-	struct marvel_rtc_time *mrt = data;
-	mrt->retval = __get_rtc_time(mrt->time);
-}
-
-static void
-smp_set_rtc_time(void *data)
-{
-	struct marvel_rtc_time *mrt = data;
-	mrt->retval = __set_rtc_time(mrt->time);
-}
-#endif
-
-static unsigned int
-marvel_get_rtc_time(struct rtc_time *time)
-{
-#ifdef CONFIG_SMP
-	struct marvel_rtc_time mrt;
-
-	if (smp_processor_id() != boot_cpuid) {
-		mrt.time = time;
-		smp_call_function_single(boot_cpuid, smp_get_rtc_time, &mrt, 1);
-		return mrt.retval;
-	}
-#endif
-	return __get_rtc_time(time);
-}
-
-static int
-marvel_set_rtc_time(struct rtc_time *time)
-{
-#ifdef CONFIG_SMP
-	struct marvel_rtc_time mrt;
-
-	if (smp_processor_id() != boot_cpuid) {
-		mrt.time = time;
-		smp_call_function_single(boot_cpuid, smp_set_rtc_time, &mrt, 1);
-		return mrt.retval;
-	}
-#endif
-	return __set_rtc_time(time);
-}
-
 static void
 marvel_smp_callin(void)
 {
@@ -492,8 +440,7 @@ struct alpha_machine_vector marvel_ev7_mv __initmv = {
 	.vector_name		= "MARVEL/EV7",
 	DO_EV7_MMU,
 	.rtc_port		= 0x70,
-	.rtc_get_time		= marvel_get_rtc_time,
-	.rtc_set_time		= marvel_set_rtc_time,
+	.rtc_boot_cpu_only	= 1,
 	DO_MARVEL_IO,
 	.machine_check		= marvel_machine_check,
 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,

arch/alpha/kernel/traps.c

@@ -241,6 +241,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 			       (const char *)(data[1] | (long)data[2] << 32), 
 			       data[0]);
 		}
+#ifdef CONFIG_ALPHA_WTINT
+		if (type == 4) {
+			/* If CALL_PAL WTINT is totally unsupported by the
+			   PALcode, e.g. MILO, "emulate" it by overwriting
+			   the insn.  */
+			unsigned int *pinsn
+			  = (unsigned int *) regs->pc - 1;
+			if (*pinsn == PAL_wtint) {
+				*pinsn = 0x47e01400; /* mov 0,$0 */
+				imb();
+				regs->r0 = 0;
+				return;
+			}
+		}
+#endif /* ALPHA_WTINT */
 		die_if_kernel((type == 1 ? "Kernel Bug" : "Instruction fault"),
 			      regs, type, NULL);
 	}

arch/alpha/lib/csum_partial_copy.c

@@ -130,7 +130,7 @@ csum_partial_cfu_aligned(const unsigned long __user *src, unsigned long *dst,
 		*dst = word | tmp;
 		checksum += carry;
 	}
-	if (err) *errp = err;
+	if (err && errp) *errp = err;
 	return checksum;
 }
 
@@ -185,7 +185,7 @@ csum_partial_cfu_dest_aligned(const unsigned long __user *src,
 		*dst = word | tmp;
 		checksum += carry;
 	}
-	if (err) *errp = err;
+	if (err && errp) *errp = err;
 	return checksum;
 }
 
@@ -242,7 +242,7 @@ csum_partial_cfu_src_aligned(const unsigned long __user *src,
 	stq_u(partial_dest | second_dest, dst);
 out:
 	checksum += carry;
-	if (err) *errp = err;
+	if (err && errp) *errp = err;
 	return checksum;
 }
 
@@ -325,7 +325,7 @@ csum_partial_cfu_unaligned(const unsigned long __user * src,
 		stq_u(partial_dest | word | second_dest, dst);
 		checksum += carry;
 	}
-	if (err) *errp = err;
+	if (err && errp) *errp = err;
 	return checksum;
 }
 
@@ -339,7 +339,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 
 	if (len) {
 		if (!access_ok(VERIFY_READ, src, len)) {
-			*errp = -EFAULT;
+			if (errp) *errp = -EFAULT;
 			memset(dst, 0, len);
 			return sum;
 		}

arch/alpha/lib/ev6-memset.S

@@ -30,14 +30,15 @@
 	.set noat
 	.set noreorder
 .text
+	.globl memset
 	.globl __memset
+	.globl ___memset
 	.globl __memsetw
 	.globl __constant_c_memset
-	.globl memset
 
-	.ent __memset
+	.ent ___memset
 .align 5
-__memset:
+___memset:
 	.frame $30,0,$26,0
 	.prologue 0
 
@@ -227,7 +228,7 @@ end_b:
 	nop
 	nop
 	ret $31,($26),1		# L0 :
-	.end __memset
+	.end ___memset
 
 	/*
 	 * This is the original body of code, prior to replication and
@@ -594,4 +595,5 @@ end_w:
 
 	.end __memsetw
 
-memset = __memset
+memset = ___memset
+__memset = ___memset

arch/alpha/lib/memset.S

@@ -19,11 +19,13 @@
 .text
 	.globl memset
 	.globl __memset
+	.globl ___memset
 	.globl __memsetw
 	.globl __constant_c_memset
-	.ent __memset
+
+	.ent ___memset
 .align 5
-__memset:
+___memset:
 	.frame $30,0,$26,0
 	.prologue 0
 
@@ -103,7 +105,7 @@ within_one_quad:
 
 end:
 	ret $31,($26),1		/* E1 */
-	.end __memset
+	.end ___memset
 
 	.align 5
 	.ent __memsetw
@@ -121,4 +123,5 @@ __memsetw:
 
 	.end __memsetw
 
-memset = __memset
+memset = ___memset
+__memset = ___memset

drivers/rtc/Kconfig

@@ -626,7 +626,7 @@ comment "Platform RTC drivers"
 
 config RTC_DRV_CMOS
 	tristate "PC-style 'CMOS'"
-	depends on X86 || ALPHA || ARM || M32R || ATARI || PPC || MIPS || SPARC64
+	depends on X86 || ARM || M32R || ATARI || PPC || MIPS || SPARC64
 	default y if X86
 	help
 	  Say "yes" here to get direct support for the real time clock
@@ -643,6 +643,14 @@ config RTC_DRV_CMOS
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-cmos.
 
+config RTC_DRV_ALPHA
+	bool "Alpha PC-style CMOS"
+	depends on ALPHA
+	default y
+	help
+	  Direct support for the real-time clock found on every Alpha
+	  system, specifically MC146818 compatibles.  If in doubt, say Y.
+
 config RTC_DRV_VRTC
 	tristate "Virtual RTC for Intel MID platforms"
 	depends on X86_INTEL_MID