rt2x00: Fix beacon de-synchronization while update beacon

When beacon is being updated to refresh TIM (AP mode), beacon frames are
de-synchronizing (i.e. two neighbor beacon frames - before and after
update - are being transmitted with a wrong time interval).
That is because xxx_write_beacon should disable beacon generation only
while beacon data are being uploaded to the device, but it should not
disable the beacon clock.
Signed-off-by: Igor Perminov <igor.perminov@inbox.ru>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2400pci.c

@@ -1069,8 +1069,6 @@ static void rt2400pci_write_beacon(struct queue_entry *entry)
 	 * otherwise we might be sending out invalid data.
 	 */
 	rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
-	rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
-	rt2x00_set_field32(&reg, CSR14_TBCN, 0);
 	rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
 	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 

drivers/net/wireless/rt2x00/rt2500pci.c

@@ -1227,8 +1227,6 @@ static void rt2500pci_write_beacon(struct queue_entry *entry)
 	 * otherwise we might be sending out invalid data.
 	 */
 	rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
-	rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
-	rt2x00_set_field32(&reg, CSR14_TBCN, 0);
 	rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
 	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 

drivers/net/wireless/rt2x00/rt2500usb.c

@@ -1238,8 +1238,6 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
 	 * otherwise we might be sending out invalid data.
 	 */
 	rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
-	rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
-	rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
 	rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
 	rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 
@@ -1287,7 +1285,7 @@ static int rt2500usb_get_tx_data_len(struct queue_entry *entry)
 static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 				    const enum data_queue_qid queue)
 {
-	u16 reg;
+	u16 reg, reg0;
 
 	if (queue != QID_BEACON) {
 		rt2x00usb_kick_tx_queue(rt2x00dev, queue);
@@ -1298,16 +1296,19 @@ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
 	if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
 		rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
 		rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
+		reg0 = reg;
 		rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
 		/*
 		 * Beacon generation will fail initially.
-		 * To prevent this we need to register the TXRX_CSR19
-		 * register several times.
+		 * To prevent this we need to change the TXRX_CSR19
+		 * register several times (reg0 is the same as reg
+		 * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0
+		 * and 1 in reg).
 		 */
 		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
-		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
+		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
 		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
-		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
+		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
 		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 	}
 }

drivers/net/wireless/rt2x00/rt2800usb.c

@@ -2050,8 +2050,6 @@ static void rt2800usb_write_beacon(struct queue_entry *entry)
 	 * otherwise we might be sending out invalid data.
 	 */
 	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
 	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
 	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 

drivers/net/wireless/rt2x00/rt61pci.c

@@ -1855,8 +1855,6 @@ static void rt61pci_write_beacon(struct queue_entry *entry)
 	 * otherwise we might be sending out invalid data.
 	 */
 	rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
-	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
 	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
 

drivers/net/wireless/rt2x00/rt73usb.c

@@ -1527,8 +1527,6 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	 * otherwise we might be sending out invalid data.
 	 */
 	rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
-	rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
 	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);