media: aspeed: Add macro for the fields of the mode-detect registers

VE_MODE_DT_HOR_TOLER: the tolerance in detecting for stable horizontal
signal.
VE_MODE_DT_VER_TOLER: the tolerance in detecting for stable vertical
signal.
VE_MODE_DT_HOR_STABLE: the minimum required count in detecting stable
HSYNC signal to set mode detection horizontal signal stable.
VE_MODE_DT_VER_STABLE: the minimum required count in detecting stable
VSYNC signal to set mode detection vertical signal stable.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

drivers/media/platform/aspeed-video.c

@@ -180,6 +180,12 @@
 #define  VE_INTERRUPT_VSYNC_DESC	BIT(11)
 
 #define VE_MODE_DETECT			0x30c
+#define  VE_MODE_DT_HOR_TOLER		GENMASK(31, 28)
+#define  VE_MODE_DT_VER_TOLER		GENMASK(27, 24)
+#define  VE_MODE_DT_HOR_STABLE		GENMASK(23, 20)
+#define  VE_MODE_DT_VER_STABLE		GENMASK(19, 16)
+#define  VE_MODE_DT_EDG_THROD		GENMASK(15, 8)
+
 #define VE_MEM_RESTRICT_START		0x310
 #define VE_MEM_RESTRICT_END		0x314
 
@@ -1135,7 +1141,12 @@ static void aspeed_video_init_regs(struct aspeed_video *video)
 	aspeed_video_write(video, VE_SCALING_FILTER3, 0x00200000);
 
 	/* Set mode detection defaults */
-	aspeed_video_write(video, VE_MODE_DETECT, 0x22666500);
+	aspeed_video_write(video, VE_MODE_DETECT,
+			   FIELD_PREP(VE_MODE_DT_HOR_TOLER, 2) |
+			   FIELD_PREP(VE_MODE_DT_VER_TOLER, 2) |
+			   FIELD_PREP(VE_MODE_DT_HOR_STABLE, 6) |
+			   FIELD_PREP(VE_MODE_DT_VER_STABLE, 6) |
+			   FIELD_PREP(VE_MODE_DT_EDG_THROD, 0x65));
 }
 
 static void aspeed_video_start(struct aspeed_video *video)