Commit d70ab7f7 authored by Takashi Iwai's avatar Takashi Iwai

Merge branch 'fix/asoc' into for-linus

parents 58936b29 2a7b1a00
......@@ -29,7 +29,7 @@ struct wm8994_ldo_pdata {
#define WM8994_CONFIGURE_GPIO 0x8000
#define WM8994_DRC_REGS 5
#define WM8994_EQ_REGS 19
#define WM8994_EQ_REGS 20
/**
* DRC configurations are specified with a label and a set of register
......
......@@ -491,16 +491,16 @@ static int wm8580_paif_hw_params(struct snd_pcm_substream *substream,
paifa |= 0x8;
break;
case SNDRV_PCM_FORMAT_S20_3LE:
paifa |= 0x10;
paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_20;
break;
case SNDRV_PCM_FORMAT_S24_LE:
paifa |= 0x10;
paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_24;
break;
case SNDRV_PCM_FORMAT_S32_LE:
paifa |= 0x10;
paifb |= WM8580_AIF_LENGTH_24;
paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_32;
break;
default:
return -EINVAL;
......
......@@ -3339,7 +3339,7 @@ static irqreturn_t wm8962_irq(int irq, void *data)
int mask;
int active;
mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2_MASK);
active = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
active &= ~mask;
......
......@@ -293,7 +293,7 @@ SOC_DOUBLE_R("Speaker Switch",
SOC_DOUBLE_R("Speaker ZC Switch",
WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
7, 1, 0),
SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 0, 3, 7, 0,
SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 3, 0, 7, 0,
spkboost_tlv),
SOC_ENUM("Speaker Reference", speaker_ref),
SOC_ENUM("Speaker Mode", speaker_mode),
......
......@@ -1622,6 +1622,8 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card)
ret = soc_register_ac97_dai_link(&card->rtd[i]);
if (ret < 0) {
printk(KERN_ERR "asoc: failed to register AC97 %s\n", card->name);
while (--i >= 0)
soc_unregister_ac97_dai_link(&card->rtd[i]);
goto probe_dai_err;
}
}
......@@ -3072,7 +3074,9 @@ int snd_soc_register_dais(struct device *dev,
pr_debug("Registered DAI '%s'\n", dai->name);
}
mutex_lock(&client_mutex);
snd_soc_instantiate_cards();
mutex_unlock(&client_mutex);
return 0;
err:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment