Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull late MIPS fixes from Ralf Baechle:
 "This fixes a number of lose ends in the MIPS code and various bug
  fixes.

  Aside of dropping some patch that should not be in this pull request
  everything has sat in -next for quite a while and there are no known
  issues.

  The biggest patch in this patch set moves the allocation of an array
  that is aliased to a function (for runtime generated code) to
  assembler code.  This avoids an issue with certain toolchains when
  building for microMIPS."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (35 commits)
  MIPS: PCI: Move fixups from __init to __devinit.
  MIPS: Fix bug.h MIPS build regression
  MIPS: sync-r4k: remove redundant irq operation
  MIPS: smp: Warn on too early irq enable
  MIPS: call set_cpu_online() on cpu being brought up with irq disabled
  MIPS: call ->smp_finish() a little late
  MIPS: Yosemite: delay irq enable to ->smp_finish()
  MIPS: SMTC: delay irq enable to ->smp_finish()
  MIPS: BMIPS: delay irq enable to ->smp_finish()
  MIPS: Octeon: delay enable irq to ->smp_finish()
  MIPS: Oprofile: Fix build as a module.
  MIPS: BCM63XX: Fix BCM6368 IPSec clock bit
  MIPS: perf: Fix build error caused by unused counters_per_cpu_to_total()
  MIPS: Fix Magic SysRq L kernel crash.
  MIPS: BMIPS: Fix duplicate header inclusion.
  mips: mark const init data with __initconst instead of __initdata
  MIPS: cmpxchg.h: Add missing include
  MIPS: Malta may also be equipped with MIPS64 R2 processors.
  MIPS: Fix typo multipy -> multiply
  MIPS: Cavium: Fix duplicate ARCH_SPARSEMEM_ENABLE in kconfig.
  ...

arch/mips/Kconfig

@@ -288,6 +288,7 @@ config MIPS_MALTA
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_CPU_MIPS64_R1
+	select SYS_HAS_CPU_MIPS64_R2
 	select SYS_HAS_CPU_NEVADA
 	select SYS_HAS_CPU_RM7000
 	select SYS_HAS_EARLY_PRINTK
@@ -1423,6 +1424,7 @@ config CPU_SB1
 config CPU_CAVIUM_OCTEON
 	bool "Cavium Octeon processor"
 	depends on SYS_HAS_CPU_CAVIUM_OCTEON
+	select ARCH_SPARSEMEM_ENABLE
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_SMP

arch/mips/bcm47xx/Kconfig

@@ -21,6 +21,7 @@ config BCM47XX_BCMA
 	select BCMA
 	select BCMA_HOST_SOC
 	select BCMA_DRIVER_MIPS
+	select BCMA_HOST_PCI if PCI
 	select BCMA_DRIVER_PCI_HOSTMODE if PCI
 	default y
 	help

arch/mips/bcm63xx/dev-pcmcia.c

@@ -79,11 +79,11 @@ static int __init config_pcmcia_cs(unsigned int cs,
 	return ret;
 }
 
-static const __initdata struct {
+static const struct {
 	unsigned int	cs;
 	unsigned int	base;
 	unsigned int	size;
-} pcmcia_cs[3] = {
+} pcmcia_cs[3] __initconst = {
 	{
 		.cs	= MPI_CS_PCMCIA_COMMON,
 		.base	= BCM_PCMCIA_COMMON_BASE_PA,

arch/mips/cavium-octeon/Kconfig

@@ -82,10 +82,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY
 	help
 	  Lock the kernel's implementation of memcpy() into L2.
 
-config ARCH_SPARSEMEM_ENABLE
-	def_bool y
-	select SPARSEMEM_STATIC
-
 config IOMMU_HELPER
 	bool
 

arch/mips/cavium-octeon/smp.c

@@ -185,7 +185,6 @@ static void __cpuinit octeon_init_secondary(void)
 	octeon_init_cvmcount();
 
 	octeon_irq_setup_secondary();
-	raw_local_irq_enable();
 }
 
 /**
@@ -233,6 +232,7 @@ static void octeon_smp_finish(void)
 
 	/* to generate the first CPU timer interrupt */
 	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+	local_irq_enable();
 }
 
 /**

arch/mips/include/asm/cmpxchg.h

@@ -8,6 +8,7 @@
 #ifndef __ASM_CMPXCHG_H
 #define __ASM_CMPXCHG_H
 
+#include <linux/bug.h>
 #include <linux/irqflags.h>
 #include <asm/war.h>
 

arch/mips/include/asm/cpu.h

@@ -94,6 +94,7 @@
 #define PRID_IMP_24KE		0x9600
 #define PRID_IMP_74K		0x9700
 #define PRID_IMP_1004K		0x9900
+#define PRID_IMP_M14KC		0x9c00
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
@@ -260,12 +261,12 @@ enum cpu_type_enum {
 	 */
 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
 	CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
-	CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC,
+	CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_M14KC,
 
 	/*
 	 * MIPS64 class processors
 	 */
-	CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
+	CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
 	CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
 	CPU_XLR, CPU_XLP,
 
@@ -288,7 +289,7 @@ enum cpu_type_enum {
 #define MIPS_CPU_ISA_M64R2	0x00000100
 
 #define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \
-	MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 )
+	MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2)
 #define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
 	MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)
 

arch/mips/include/asm/gic.h

@@ -206,7 +206,7 @@
 
 #define GIC_VPE_EIC_SHADOW_SET_BASE	0x0100
 #define GIC_VPE_EIC_SS(intr) \
-	(GIC_EIC_SHADOW_SET_BASE + (4 * intr))
+	(GIC_VPE_EIC_SHADOW_SET_BASE + (4 * intr))
 
 #define GIC_VPE_EIC_VEC_BASE		0x0800
 #define GIC_VPE_EIC_VEC(intr) \
@@ -330,6 +330,17 @@ struct gic_intr_map {
 #define GIC_FLAG_TRANSPARENT   0x02
 };
 
+/*
+ * This is only used in EIC mode. This helps to figure out which
+ * shared interrupts we need to process when we get a vector interrupt.
+ */
+#define GIC_MAX_SHARED_INTR  0x5
+struct gic_shared_intr_map {
+	unsigned int num_shared_intr;
+	unsigned int intr_list[GIC_MAX_SHARED_INTR];
+	unsigned int local_intr_mask;
+};
+
 extern void gic_init(unsigned long gic_base_addr,
 	unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
 	unsigned int intrmap_size, unsigned int irqbase);
@@ -338,5 +349,7 @@ extern unsigned int gic_get_int(void);
 extern void gic_send_ipi(unsigned int intr);
 extern unsigned int plat_ipi_call_int_xlate(unsigned int);
 extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
+extern void gic_bind_eic_interrupt(int irq, int set);
+extern unsigned int gic_get_timer_pending(void);
 
 #endif /* _ASM_GICREGS_H */

arch/mips/include/asm/inst.h

@@ -251,7 +251,7 @@ struct f_format {	/* FPU register format */
 	unsigned int func : 6;
 };
 
-struct ma_format {	/* FPU multipy and add format (MIPS IV) */
+struct ma_format {	/* FPU multiply and add format (MIPS IV) */
 	unsigned int opcode : 6;
 	unsigned int fr : 5;
 	unsigned int ft : 5;
@@ -324,7 +324,7 @@ struct f_format {	/* FPU register format */
 	unsigned int opcode : 6;
 };
 
-struct ma_format {	/* FPU multipy and add format (MIPS IV) */
+struct ma_format {	/* FPU multiply and add format (MIPS IV) */
 	unsigned int fmt : 2;
 	unsigned int func : 4;
 	unsigned int fd : 5;

arch/mips/include/asm/irq.h

@@ -136,6 +136,7 @@ extern void free_irqno(unsigned int irq);
  * IE7.  Since R2 their number has to be read from the c0_intctl register.
  */
 #define CP0_LEGACY_COMPARE_IRQ 7
+#define CP0_LEGACY_PERFCNT_IRQ 7
 
 extern int cp0_compare_irq;
 extern int cp0_compare_irq_shift;

arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h

@@ -99,7 +99,7 @@
 #define CKCTL_6368_USBH_CLK_EN		(1 << 15)
 #define CKCTL_6368_DISABLE_GLESS_EN	(1 << 16)
 #define CKCTL_6368_NAND_CLK_EN		(1 << 17)
-#define CKCTL_6368_IPSEC_CLK_EN		(1 << 17)
+#define CKCTL_6368_IPSEC_CLK_EN		(1 << 18)
 
 #define CKCTL_6368_ALL_SAFE_EN		(CKCTL_6368_SWPKT_USB_EN |	\
 					CKCTL_6368_SWPKT_SAR_EN |	\

arch/mips/include/asm/mips-boards/maltaint.h

@@ -86,6 +86,16 @@
 #define GIC_CPU_INT4		4 /* .			*/
 #define GIC_CPU_INT5		5 /* Core Interrupt 5   */
 
+/* MALTA GIC local interrupts */
+#define GIC_INT_TMR             (GIC_CPU_INT5)
+#define GIC_INT_PERFCTR         (GIC_CPU_INT5)
+
+/* GIC constants */
+/* Add 2 to convert non-eic hw int # to eic vector # */
+#define GIC_CPU_TO_VEC_OFFSET   (2)
+/* If we map an intr to pin X, GIC will actually generate vector X+1 */
+#define GIC_PIN_TO_VEC_OFFSET   (1)
+
 #define GIC_EXT_INTR(x)		x
 
 /* External Interrupts used for IPI */

arch/mips/include/asm/switch_to.h

@@ -22,7 +22,7 @@ struct task_struct;
  * switch_to(n) should switch tasks to task nr n, first
  * checking that n isn't the current task, in which case it does nothing.
  */
-extern asmlinkage void *resume(void *last, void *next, void *next_ti);
+extern asmlinkage void *resume(void *last, void *next, void *next_ti, u32 __usedfpu);
 
 extern unsigned int ll_bit;
 extern struct task_struct *ll_task;
@@ -66,11 +66,13 @@ do {									\
 
 #define switch_to(prev, next, last)					\
 do {									\
+	u32 __usedfpu;							\
 	__mips_mt_fpaff_switch_to(prev);				\
 	if (cpu_has_dsp)						\
 		__save_dsp(prev);					\
 	__clear_software_ll_bit();					\
-	(last) = resume(prev, next, task_thread_info(next));		\
+	__usedfpu = test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU);	\
+	(last) = resume(prev, next, task_thread_info(next), __usedfpu);	\
 } while (0)
 
 #define finish_arch_switch(prev)					\

arch/mips/include/asm/thread_info.h

@@ -60,6 +60,8 @@ struct thread_info {
 register struct thread_info *__current_thread_info __asm__("$28");
 #define current_thread_info()  __current_thread_info
 
+#endif /* !__ASSEMBLY__ */
+
 /* thread information allocation */
 #if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT)
 #define THREAD_SIZE_ORDER (1)
@@ -85,8 +87,6 @@ register struct thread_info *__current_thread_info __asm__("$28");
 
 #define STACK_WARN	(THREAD_SIZE / 8)
 
-#endif /* !__ASSEMBLY__ */
-
 #define PREEMPT_ACTIVE		0x10000000
 
 /*

arch/mips/kernel/cpu-probe.c

@@ -4,7 +4,7 @@
  * Copyright (C) xxxx  the Anonymous
  * Copyright (C) 1994 - 2006 Ralf Baechle
  * Copyright (C) 2003, 2004  Maciej W. Rozycki
- * Copyright (C) 2001, 2004  MIPS Inc.
+ * Copyright (C) 2001, 2004, 2011, 2012  MIPS Technologies, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -199,6 +199,7 @@ void __init check_wait(void)
 		cpu_wait = rm7k_wait_irqoff;
 		break;
 
+	case CPU_M14KC:
 	case CPU_24K:
 	case CPU_34K:
 	case CPU_1004K:
@@ -810,6 +811,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_5KC;
 		__cpu_name[cpu] = "MIPS 5Kc";
 		break;
+	case PRID_IMP_5KE:
+		c->cputype = CPU_5KE;
+		__cpu_name[cpu] = "MIPS 5KE";
+		break;
 	case PRID_IMP_20KC:
 		c->cputype = CPU_20KC;
 		__cpu_name[cpu] = "MIPS 20Kc";
@@ -831,6 +836,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_74K;
 		__cpu_name[cpu] = "MIPS 74Kc";
 		break;
+	case PRID_IMP_M14KC:
+		c->cputype = CPU_M14KC;
+		__cpu_name[cpu] = "MIPS M14Kc";
+		break;
 	case PRID_IMP_1004K:
 		c->cputype = CPU_1004K;
 		__cpu_name[cpu] = "MIPS 1004Kc";

arch/mips/kernel/mips_ksyms.c

@@ -5,7 +5,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05 by Ralf Baechle
+ * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05, 12 by Ralf Baechle
  * Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc.
  */
 #include <linux/interrupt.h>
@@ -34,6 +34,12 @@ EXPORT_SYMBOL(memmove);
 
 EXPORT_SYMBOL(kernel_thread);
 
+/*
+ * Functions that operate on entire pages.  Mostly used by memory management.
+ */
+EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
+
 /*
  * Userspace access stuff.
  */

arch/mips/kernel/octeon_switch.S

@@ -31,7 +31,7 @@
 
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *                     struct thread_info *next_ti)
+ *                     struct thread_info *next_ti, int usedfpu)
  */
 	.align	7
 	LEAF(resume)

arch/mips/kernel/perf_event_mipsxx.c

@@ -162,11 +162,6 @@ static unsigned int counters_total_to_per_cpu(unsigned int counters)
 	return counters >> vpe_shift();
 }
 
-static unsigned int counters_per_cpu_to_total(unsigned int counters)
-{
-	return counters << vpe_shift();
-}
-
 #else /* !CONFIG_MIPS_MT_SMP */
 #define vpe_id()	0
 

arch/mips/kernel/r2300_switch.S

@@ -43,7 +43,7 @@
 
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *                     struct thread_info *next_ti) )
+ *                     struct thread_info *next_ti, int usedfpu)
  */
 LEAF(resume)
 	mfc0	t1, CP0_STATUS
@@ -51,18 +51,9 @@ LEAF(resume)
 	cpu_save_nonscratch a0
 	sw	ra, THREAD_REG31(a0)
 
-	/*
-	 * check if we need to save FPU registers
-	 */
-	lw	t3, TASK_THREAD_INFO(a0)
-	lw	t0, TI_FLAGS(t3)
-	li	t1, _TIF_USEDFPU
-	and	t2, t0, t1
-	beqz	t2, 1f
-	nor	t1, zero, t1
+	beqz	a3, 1f
 
-	and	t0, t0, t1
-	sw	t0, TI_FLAGS(t3)
+	PTR_L	t3, TASK_THREAD_INFO(a0)
 
 	/*
 	 * clear saved user stack CU1 bit

arch/mips/kernel/r4k_switch.S

@@ -41,7 +41,7 @@
 
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *                     struct thread_info *next_ti)
+ *                     struct thread_info *next_ti, int usedfpu)
  */
 	.align	5
 	LEAF(resume)
@@ -53,16 +53,10 @@
 	/*
 	 * check if we need to save FPU registers
 	 */
-	PTR_L	t3, TASK_THREAD_INFO(a0)
-	LONG_L	t0, TI_FLAGS(t3)
-	li	t1, _TIF_USEDFPU
-	and	t2, t0, t1
-	beqz	t2, 1f
-	nor	t1, zero, t1
 
-	and	t0, t0, t1
-	LONG_S	t0, TI_FLAGS(t3)
+	beqz    a3, 1f
 
+	PTR_L	t3, TASK_THREAD_INFO(a0)
 	/*
 	 * clear saved user stack CU1 bit
 	 */

arch/mips/kernel/smp-bmips.c

@@ -15,7 +15,6 @@
 #include <linux/smp.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
-#include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
 #include <linux/reboot.h>
@@ -197,13 +196,6 @@ static void bmips_init_secondary(void)
 
 	write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
 #endif
-
-	/* make sure there won't be a timer interrupt for a little while */
-	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
-
-	irq_enable_hazard();
-	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
-	irq_enable_hazard();
 }
 
 /*
@@ -212,6 +204,13 @@ static void bmips_init_secondary(void)
 static void bmips_smp_finish(void)
 {
 	pr_info("SMP: CPU%d is running\n", smp_processor_id());
+
+	/* make sure there won't be a timer interrupt for a little while */
+	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+
+	irq_enable_hazard();
+	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
+	irq_enable_hazard();
 }
 
 /*

arch/mips/kernel/smp.c

@@ -122,13 +122,21 @@ asmlinkage __cpuinit void start_secondary(void)
 
 	notify_cpu_starting(cpu);
 
-	mp_ops->smp_finish();
+	set_cpu_online(cpu, true);
+
 	set_cpu_sibling_map(cpu);
 
 	cpu_set(cpu, cpu_callin_map);
 
 	synchronise_count_slave();
 
+	/*
+	 * irq will be enabled in ->smp_finish(), enabling it too early
+	 * is dangerous.
+	 */
+	WARN_ON_ONCE(!irqs_disabled());
+	mp_ops->smp_finish();
+
 	cpu_idle();
 }
 
@@ -196,8 +204,6 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	while (!cpu_isset(cpu, cpu_callin_map))
 		udelay(100);
 
-	set_cpu_online(cpu, true);
-
 	return 0;
 }
 

arch/mips/kernel/smtc.c

@@ -322,7 +322,7 @@ int __init smtc_build_cpu_map(int start_cpu_slot)
 
 /*
  * Common setup before any secondaries are started
- * Make sure all CPU's are in a sensible state before we boot any of the
+ * Make sure all CPUs are in a sensible state before we boot any of the
  * secondaries.
  *
  * For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly
@@ -340,12 +340,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 	/*
 	 * TCContext gets an offset from the base of the IPIQ array
 	 * to be used in low-level code to detect the presence of
-	 * an active IPI queue
+	 * an active IPI queue.
 	 */
 	write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
 	/* Bind tc to vpe */
 	write_tc_c0_tcbind(vpe);
-	/* In general, all TCs should have the same cpu_data indications */
+	/* In general, all TCs should have the same cpu_data indications. */
 	memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
 	/* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */
 	if (cpu_data[0].cputype == CPU_34K ||
@@ -358,8 +358,8 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 }
 
 /*
- * Tweak to get Count registes in as close a sync as possible.
- * Value seems good for 34K-class cores.
+ * Tweak to get Count registes in as close a sync as possible.  The
+ * value seems good for 34K-class cores.
  */
 
 #define CP0_SKEW 8
@@ -615,7 +615,6 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
 
 void smtc_init_secondary(void)
 {
-	local_irq_enable();
 }
 
 void smtc_smp_finish(void)
@@ -631,6 +630,8 @@ void smtc_smp_finish(void)
 	if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
 		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
 
+	local_irq_enable();
+
 	printk("TC %d going on-line as CPU %d\n",
 		cpu_data[smp_processor_id()].tc_id, smp_processor_id());
 }

arch/mips/kernel/sync-r4k.c

@@ -111,7 +111,6 @@ void __cpuinit synchronise_count_master(void)
 void __cpuinit synchronise_count_slave(void)
 {
 	int i;
-	unsigned long flags;
 	unsigned int initcount;
 	int ncpus;
 
@@ -123,8 +122,6 @@ void __cpuinit synchronise_count_slave(void)
 	return;
 #endif
 
-	local_irq_save(flags);
-
 	/*
 	 * Not every cpu is online at the time this gets called,
 	 * so we first wait for the master to say everyone is ready
@@ -154,7 +151,5 @@ void __cpuinit synchronise_count_slave(void)
 	}
 	/* Arrange for an interrupt in a short while */
 	write_c0_compare(read_c0_count() + COUNTON);
-
-	local_irq_restore(flags);
 }
 #undef NR_LOOPS

arch/mips/kernel/traps.c

@@ -132,6 +132,9 @@ static void show_backtrace(struct task_struct *task, const struct pt_regs *regs)
 	unsigned long ra = regs->regs[31];
 	unsigned long pc = regs->cp0_epc;
 
+	if (!task)
+		task = current;
+
 	if (raw_show_trace || !__kernel_text_address(pc)) {
 		show_raw_backtrace(sp);
 		return;
@@ -1249,6 +1252,7 @@ static inline void parity_protection_init(void)
 		break;
 
 	case CPU_5KC:
+	case CPU_5KE:
 		write_c0_ecc(0x80000000);
 		back_to_back_c0_hazard();
 		/* Set the PE bit (bit 31) in the c0_errctl register. */
@@ -1498,6 +1502,7 @@ extern void flush_tlb_handlers(void);
  * Timer interrupt
  */
 int cp0_compare_irq;
+EXPORT_SYMBOL_GPL(cp0_compare_irq);
 int cp0_compare_irq_shift;
 
 /*
@@ -1597,7 +1602,7 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu)
 			cp0_perfcount_irq = -1;
 	} else {
 		cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-		cp0_compare_irq_shift = cp0_compare_irq;
+		cp0_compare_irq_shift = CP0_LEGACY_PERFCNT_IRQ;
 		cp0_perfcount_irq = -1;
 	}
 

arch/mips/kernel/vmlinux.lds.S

 #include <asm/asm-offsets.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 #include <asm-generic/vmlinux.lds.h>
 
 #undef mips
@@ -72,7 +73,7 @@ SECTIONS
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
 
-		INIT_TASK_DATA(PAGE_SIZE)
+		INIT_TASK_DATA(THREAD_SIZE)
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
 		READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)

arch/mips/mm/Makefile

@@ -3,8 +3,8 @@
 #
 
 obj-y				+= cache.o dma-default.o extable.o fault.o \
-				   gup.o init.o mmap.o page.o tlbex.o \
-				   tlbex-fault.o uasm.o
+				   gup.o init.o mmap.o page.o page-funcs.o \
+				   tlbex.o tlbex-fault.o uasm.o
 
 obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o

arch/mips/mm/c-r4k.c

@@ -977,7 +977,7 @@ static void __cpuinit probe_pcache(void)
 			c->icache.linesz = 2 << lsize;
 		else
 			c->icache.linesz = lsize;
-		c->icache.sets = 64 << ((config1 >> 22) & 7);
+		c->icache.sets = 32 << (((config1 >> 22) + 1) & 7);
 		c->icache.ways = 1 + ((config1 >> 16) & 7);
 
 		icache_size = c->icache.sets *
@@ -997,7 +997,7 @@ static void __cpuinit probe_pcache(void)
 			c->dcache.linesz = 2 << lsize;
 		else
 			c->dcache.linesz= lsize;
-		c->dcache.sets = 64 << ((config1 >> 13) & 7);
+		c->dcache.sets = 32 << (((config1 >> 13) + 1) & 7);
 		c->dcache.ways = 1 + ((config1 >> 7) & 7);
 
 		dcache_size = c->dcache.sets *
@@ -1051,6 +1051,7 @@ static void __cpuinit probe_pcache(void)
 	case CPU_R14000:
 		break;
 
+	case CPU_M14KC:
 	case CPU_24K:
 	case CPU_34K:
 	case CPU_74K:

arch/mips/mm/page-funcs.S

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Micro-assembler generated clear_page/copy_page functions.
+ *
+ * Copyright (C) 2012  MIPS Technologies, Inc.
+ * Copyright (C) 2012  Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+#define cpu_clear_page_function_name	clear_page_cpu
+#define cpu_copy_page_function_name	copy_page_cpu
+#else
+#define cpu_clear_page_function_name	clear_page
+#define cpu_copy_page_function_name	copy_page
+#endif
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache:		0x058 bytes
+ * R4600 v1.7:				0x05c bytes
+ * R4600 v2.0:				0x060 bytes
+ * With prefetching, 16 word strides	0x120 bytes
+ */
+EXPORT(__clear_page_start)
+LEAF(cpu_clear_page_function_name)
+1:	j	1b		/* Dummy, will be replaced. */
+	.space 288
+END(cpu_clear_page_function_name)
+EXPORT(__clear_page_end)
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache:		0x11c bytes
+ * R4600 v1.7:				0x080 bytes
+ * R4600 v2.0:				0x07c bytes
+ * With prefetching, 16 word strides	0x540 bytes
+ */
+EXPORT(__copy_page_start)
+LEAF(cpu_copy_page_function_name)
+1:	j	1b		/* Dummy, will be replaced. */
+	.space 1344
+END(cpu_copy_page_function_name)
+EXPORT(__copy_page_end)

arch/mips/mm/page.c

@@ -6,6 +6,7 @@
  * Copyright (C) 2003, 04, 05 Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 2007  Maciej W. Rozycki
  * Copyright (C) 2008  Thiemo Seufer
+ * Copyright (C) 2012  MIPS Technologies, Inc.
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -71,45 +72,6 @@ static struct uasm_reloc __cpuinitdata relocs[5];
 #define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x00002010)
 #define cpu_is_r4600_v2_x()	((read_c0_prid() & 0xfffffff0) == 0x00002020)
 
-/*
- * Maximum sizes:
- *
- * R4000 128 bytes S-cache:		0x058 bytes
- * R4600 v1.7:				0x05c bytes
- * R4600 v2.0:				0x060 bytes
- * With prefetching, 16 word strides	0x120 bytes
- */
-
-static u32 clear_page_array[0x120 / 4];
-
-#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
-void clear_page_cpu(void *page) __attribute__((alias("clear_page_array")));
-#else
-void clear_page(void *page) __attribute__((alias("clear_page_array")));
-#endif
-
-EXPORT_SYMBOL(clear_page);
-
-/*
- * Maximum sizes:
- *
- * R4000 128 bytes S-cache:		0x11c bytes
- * R4600 v1.7:				0x080 bytes
- * R4600 v2.0:				0x07c bytes
- * With prefetching, 16 word strides	0x540 bytes
- */
-static u32 copy_page_array[0x540 / 4];
-
-#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
-void
-copy_page_cpu(void *to, void *from) __attribute__((alias("copy_page_array")));
-#else
-void copy_page(void *to, void *from) __attribute__((alias("copy_page_array")));
-#endif
-
-EXPORT_SYMBOL(copy_page);
-
-
 static int pref_bias_clear_store __cpuinitdata;
 static int pref_bias_copy_load __cpuinitdata;
 static int pref_bias_copy_store __cpuinitdata;
@@ -282,10 +244,15 @@ static inline void __cpuinit build_clear_pref(u32 **buf, int off)
 		}
 }
 
+extern u32 __clear_page_start;
+extern u32 __clear_page_end;
+extern u32 __copy_page_start;
+extern u32 __copy_page_end;
+
 void __cpuinit build_clear_page(void)
 {
 	int off;
-	u32 *buf = (u32 *)&clear_page_array;
+	u32 *buf = &__clear_page_start;
 	struct uasm_label *l = labels;
 	struct uasm_reloc *r = relocs;
 	int i;
@@ -356,17 +323,17 @@ void __cpuinit build_clear_page(void)
 	uasm_i_jr(&buf, RA);
 	uasm_i_nop(&buf);
 
-	BUG_ON(buf > clear_page_array + ARRAY_SIZE(clear_page_array));
+	BUG_ON(buf > &__clear_page_end);
 
 	uasm_resolve_relocs(relocs, labels);
 
 	pr_debug("Synthesized clear page handler (%u instructions).\n",
-		 (u32)(buf - clear_page_array));
+		 (u32)(buf - &__clear_page_start));
 
 	pr_debug("\t.set push\n");
 	pr_debug("\t.set noreorder\n");
-	for (i = 0; i < (buf - clear_page_array); i++)
-		pr_debug("\t.word 0x%08x\n", clear_page_array[i]);
+	for (i = 0; i < (buf - &__clear_page_start); i++)
+		pr_debug("\t.word 0x%08x\n", (&__clear_page_start)[i]);
 	pr_debug("\t.set pop\n");
 }
 
@@ -427,7 +394,7 @@ static inline void build_copy_store_pref(u32 **buf, int off)
 void __cpuinit build_copy_page(void)
 {
 	int off;
-	u32 *buf = (u32 *)&copy_page_array;
+	u32 *buf = &__copy_page_start;
 	struct uasm_label *l = labels;
 	struct uasm_reloc *r = relocs;
 	int i;
@@ -595,21 +562,23 @@ void __cpuinit build_copy_page(void)
 	uasm_i_jr(&buf, RA);
 	uasm_i_nop(&buf);
 
-	BUG_ON(buf > copy_page_array + ARRAY_SIZE(copy_page_array));
+	BUG_ON(buf > &__copy_page_end);
 
 	uasm_resolve_relocs(relocs, labels);
 
 	pr_debug("Synthesized copy page handler (%u instructions).\n",
-		 (u32)(buf - copy_page_array));
+		 (u32)(buf - &__copy_page_start));
 
 	pr_debug("\t.set push\n");
 	pr_debug("\t.set noreorder\n");
-	for (i = 0; i < (buf - copy_page_array); i++)
-		pr_debug("\t.word 0x%08x\n", copy_page_array[i]);
+	for (i = 0; i < (buf - &__copy_page_start); i++)
+		pr_debug("\t.word 0x%08x\n", (&__copy_page_start)[i]);
 	pr_debug("\t.set pop\n");
 }
 
 #ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+extern void clear_page_cpu(void *page);
+extern void copy_page_cpu(void *to, void *from);
 
 /*
  * Pad descriptors to cacheline, since each is exclusively owned by a

arch/mips/mm/tlbex.c

@@ -9,6 +9,7 @@
  * Copyright (C) 2005, 2007, 2008, 2009  Maciej W. Rozycki
  * Copyright (C) 2006  Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 2008, 2009 Cavium Networks, Inc.
+ * Copyright (C) 2011  MIPS Technologies, Inc.
  *
  * ... and the days got worse and worse and now you see
  * I've gone completly out of my mind.
@@ -494,6 +495,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
 	case CPU_R14000:
 	case CPU_4KC:
 	case CPU_4KEC:
+	case CPU_M14KC:
 	case CPU_SB1:
 	case CPU_SB1A:
 	case CPU_4KSC:

arch/mips/mti-malta/malta-pci.c

@@ -241,8 +241,9 @@ void __init mips_pcibios_init(void)
 		return;
 	}
 
-	if (controller->io_resource->start < 0x00001000UL)	/* FIXME */
-		controller->io_resource->start = 0x00001000UL;
+	/* Change start address to avoid conflicts with ACPI and SMB devices */
+	if (controller->io_resource->start < 0x00002000UL)
+		controller->io_resource->start = 0x00002000UL;
 
 	iomem_resource.end &= 0xfffffffffULL;			/* 64 GB */
 	ioport_resource.end = controller->io_resource->end;
@@ -253,7 +254,7 @@ void __init mips_pcibios_init(void)
 }
 
 /* Enable PCI 2.1 compatibility in PIIX4 */
-static void __init quirk_dlcsetup(struct pci_dev *dev)
+static void __devinit quirk_dlcsetup(struct pci_dev *dev)
 {
 	u8 odlc, ndlc;
 	(void) pci_read_config_byte(dev, 0x82, &odlc);

arch/mips/mti-malta/malta-setup.c

@@ -111,7 +111,7 @@ static void __init pci_clock_check(void)
 	unsigned int __iomem *jmpr_p =
 		(unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
 	int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
-	static const int pciclocks[] __initdata = {
+	static const int pciclocks[] __initconst = {
 		33, 20, 25, 30, 12, 16, 37, 10
 	};
 	int pciclock = pciclocks[jmpr];

arch/mips/netlogic/xlp/setup.c

@@ -82,8 +82,10 @@ void __init prom_free_prom_memory(void)
 
 void xlp_mmu_init(void)
 {
+	/* enable extended TLB and Large Fixed TLB */
 	write_c0_config6(read_c0_config6() | 0x24);
-	current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
+	/* set page mask of Fixed TLB in config7 */
 	write_c0_config7(PM_DEFAULT_MASK >>
 		(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
 }
@@ -100,6 +102,10 @@ void __init prom_init(void)
 	nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
 #ifdef CONFIG_SMP
 	nlm_wakeup_secondary_cpus(0xffffffff);
+
+	/* update TLB size after waking up threads */
+	current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
 	register_smp_ops(&nlm_smp_ops);
 #endif
 }

arch/mips/oprofile/common.c

@@ -78,6 +78,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 
 	switch (current_cpu_type()) {
 	case CPU_5KC:
+	case CPU_M14KC:
 	case CPU_20KC:
 	case CPU_24K:
 	case CPU_25KF:

arch/mips/oprofile/op_model_mipsxx.c

@@ -322,6 +322,10 @@ static int __init mipsxx_init(void)
 
 	op_model_mipsxx_ops.num_counters = counters;
 	switch (current_cpu_type()) {
+	case CPU_M14KC:
+		op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
+		break;
+
 	case CPU_20KC:
 		op_model_mipsxx_ops.cpu_type = "mips/20K";
 		break;

arch/mips/pci/fixup-fuloong2e.c

@@ -48,7 +48,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 	return 0;
 }
 
-static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_nec_fixup(struct pci_dev *pdev)
 {
 	unsigned int val;
 
@@ -60,7 +60,7 @@ static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
 	pci_write_config_dword(pdev, 0xe4, 1 << 5);
 }
 
-static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func0_fixup(struct pci_dev *pdev)
 {
 	unsigned char c;
 
@@ -135,7 +135,7 @@ static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
 	printk(KERN_INFO"via686b fix: ISA bridge done\n");
 }
 
-static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func1_fixup(struct pci_dev *pdev)
 {
 	printk(KERN_INFO"via686b fix: IDE\n");
 
@@ -168,19 +168,19 @@ static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
 	printk(KERN_INFO"via686b fix: IDE done\n");
 }
 
-static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func2_fixup(struct pci_dev *pdev)
 {
 	/* irq routing */
 	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
 }
 
-static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func3_fixup(struct pci_dev *pdev)
 {
 	/* irq routing */
 	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
 }
 
-static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func5_fixup(struct pci_dev *pdev)
 {
 	unsigned int val;
 	unsigned char c;

arch/mips/pci/fixup-lemote2f.c

@@ -96,21 +96,21 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 }
 
 /* CS5536 SPEC. fixup */
-static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_isa_fixup(struct pci_dev *pdev)
 {
 	/* the uart1 and uart2 interrupt in PIC is enabled as default */
 	pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1);
 	pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1);
 }
 
-static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ide_fixup(struct pci_dev *pdev)
 {
 	/* setting the mutex pin as IDE function */
 	pci_write_config_dword(pdev, PCI_IDE_CFG_REG,
 			       CS5536_IDE_FLASH_SIGNATURE);
 }
 
-static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_acc_fixup(struct pci_dev *pdev)
 {
 	/* enable the AUDIO interrupt in PIC  */
 	pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1);
@@ -118,14 +118,14 @@ static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
 	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0);
 }
 
-static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
 {
 	/* enable the OHCI interrupt in PIC */
 	/* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */
 	pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1);
 }
 
-static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
 {
 	u32 hi, lo;
 
@@ -137,7 +137,7 @@ static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
 	pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
 }
 
-static void __init loongson_nec_fixup(struct pci_dev *pdev)
+static void __devinit loongson_nec_fixup(struct pci_dev *pdev)
 {
 	unsigned int val;
 

arch/mips/pci/fixup-malta.c

@@ -49,10 +49,10 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 	return 0;
 }
 
-static void __init malta_piix_func0_fixup(struct pci_dev *pdev)
+static void __devinit malta_piix_func0_fixup(struct pci_dev *pdev)
 {
 	unsigned char reg_val;
-	static int piixirqmap[16] __initdata = {  /* PIIX PIRQC[A:D] irq mappings */
+	static int piixirqmap[16] __devinitdata = {  /* PIIX PIRQC[A:D] irq mappings */
 		0,  0, 	0,  3,
 		4,  5,  6,  7,
 		0,  9, 10, 11,
@@ -83,7 +83,7 @@ static void __init malta_piix_func0_fixup(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
 	 malta_piix_func0_fixup);
 
-static void __init malta_piix_func1_fixup(struct pci_dev *pdev)
+static void __devinit malta_piix_func1_fixup(struct pci_dev *pdev)
 {
 	unsigned char reg_val;
 

arch/mips/pci/fixup-mpc30x.c

@@ -22,13 +22,13 @@
 
 #include <asm/vr41xx/mpc30x.h>
 
-static const int internal_func_irqs[] __initdata = {
+static const int internal_func_irqs[] __initconst = {
 	VRC4173_CASCADE_IRQ,
 	VRC4173_AC97_IRQ,
 	VRC4173_USB_IRQ,
 };
 
-static const int irq_tab_mpc30x[] __initdata = {
+static const int irq_tab_mpc30x[] __initconst = {
  [12] = VRC4173_PCMCIA1_IRQ,
  [13] = VRC4173_PCMCIA2_IRQ,
  [29] = MQ200_IRQ,

arch/mips/pci/fixup-sb1250.c

@@ -15,7 +15,7 @@
  * Set the BCM1250, etc. PCI host bridge's TRDY timeout
  * to the finite max.
  */
-static void __init quirk_sb1250_pci(struct pci_dev *dev)
+static void __devinit quirk_sb1250_pci(struct pci_dev *dev)
 {
 	pci_write_config_byte(dev, 0x40, 0xff);
 }
@@ -25,7 +25,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI,
 /*
  * The BCM1250, etc. PCI/HT bridge reports as a host bridge.
  */
-static void __init quirk_sb1250_ht(struct pci_dev *dev)
+static void __devinit quirk_sb1250_ht(struct pci_dev *dev)
 {
 	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
 }
@@ -35,7 +35,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT,
 /*
  * Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
  */
-static void __init quirk_sp1011(struct pci_dev *dev)
+static void __devinit quirk_sp1011(struct pci_dev *dev)
 {
 	pci_write_config_byte(dev, 0x64, 0xff);
 }

arch/mips/pci/ops-tx4927.c

@@ -495,7 +495,7 @@ irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
 }
 
 #ifdef CONFIG_TOSHIBA_FPCIB0
-static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
 {
 	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
 

arch/mips/pci/pci-ip27.c

@@ -212,7 +212,7 @@ static inline void pci_enable_swapping(struct pci_dev *dev)
 	bridge->b_widget.w_tflush;	/* Flush */
 }
 
-static void __init pci_fixup_ioc3(struct pci_dev *d)
+static void __devinit pci_fixup_ioc3(struct pci_dev *d)
 {
 	pci_disable_swapping(d);
 }

arch/mips/pci/pci-xlr.c

@@ -41,6 +41,7 @@
 #include <linux/irq.h>
 #include <linux/irqdesc.h>
 #include <linux/console.h>
+#include <linux/pci_regs.h>
 
 #include <asm/io.h>
 
@@ -156,35 +157,55 @@ struct pci_controller nlm_pci_controller = {
 	.io_offset      = 0x00000000UL,
 };
 
+/*
+ * The top level PCIe links on the XLS PCIe controller appear as
+ * bridges. Given a device, this function finds which link it is
+ * on.
+ */
+static struct pci_dev *xls_get_pcie_link(const struct pci_dev *dev)
+{
+	struct pci_bus *bus, *p;
+
+	/* Find the bridge on bus 0 */
+	bus = dev->bus;
+	for (p = bus->parent; p && p->number != 0; p = p->parent)
+		bus = p;
+
+	return p ? bus->self : NULL;
+}
+
 static int get_irq_vector(const struct pci_dev *dev)
 {
+	struct pci_dev *lnk;
+
 	if (!nlm_chip_is_xls())
-		return	PIC_PCIX_IRQ;	/* for XLR just one IRQ*/
+		return	PIC_PCIX_IRQ;	/* for XLR just one IRQ */
 
 	/*
 	 * For XLS PCIe, there is an IRQ per Link, find out which
 	 * link the device is on to assign interrupts
 	 */
-	if (dev->bus->self == NULL)
+	lnk = xls_get_pcie_link(dev);
+	if (lnk == NULL)
 		return 0;
 
-	switch	(dev->bus->self->devfn) {
-	case 0x0:
+	switch	(PCI_SLOT(lnk->devfn)) {
+	case 0:
 		return PIC_PCIE_LINK0_IRQ;
-	case 0x8:
+	case 1:
 		return PIC_PCIE_LINK1_IRQ;
-	case 0x10:
+	case 2:
 		if (nlm_chip_is_xls_b())
 			return PIC_PCIE_XLSB0_LINK2_IRQ;
 		else
 			return PIC_PCIE_LINK2_IRQ;
-	case 0x18:
+	case 3:
 		if (nlm_chip_is_xls_b())
 			return PIC_PCIE_XLSB0_LINK3_IRQ;
 		else
 			return PIC_PCIE_LINK3_IRQ;
 	}
-	WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn);
+	WARN(1, "Unexpected devfn %d\n", lnk->devfn);
 	return 0;
 }
 
@@ -202,7 +223,27 @@ void arch_teardown_msi_irq(unsigned int irq)
 int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
+	struct pci_dev *lnk;
 	int irq, ret;
+	u16 val;
+
+	/* MSI not supported on XLR */
+	if (!nlm_chip_is_xls())
+		return 1;
+
+	/*
+	 * Enable MSI on the XLS PCIe controller bridge which was disabled
+	 * at enumeration, the bridge MSI capability is at 0x50
+	 */
+	lnk = xls_get_pcie_link(dev);
+	if (lnk == NULL)
+		return 1;
+
+	pci_read_config_word(lnk, 0x50 + PCI_MSI_FLAGS, &val);
+	if ((val & PCI_MSI_FLAGS_ENABLE) == 0) {
+		val |= PCI_MSI_FLAGS_ENABLE;
+		pci_write_config_word(lnk, 0x50 + PCI_MSI_FLAGS, val);
+	}
 
 	irq = get_irq_vector(dev);
 	if (irq <= 0)
@@ -327,7 +368,7 @@ static int __init pcibios_init(void)
 		}
 	} else {
 		/* XLR PCI controller ACK */
-		irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack);
+		irq_set_handler_data(PIC_PCIX_IRQ, xlr_pci_ack);
 	}
 
 	return 0;

arch/mips/pmc-sierra/yosemite/smp.c

@@ -115,11 +115,11 @@ static void yos_send_ipi_mask(const struct cpumask *mask, unsigned int action)
  */
 static void __cpuinit yos_init_secondary(void)
 {
-	set_c0_status(ST0_CO | ST0_IE | ST0_IM);
 }
 
 static void __cpuinit yos_smp_finish(void)
 {
+	set_c0_status(ST0_CO | ST0_IM | ST0_IE);
 }
 
 /* Hook for after all CPUs are online */

arch/mips/powertv/asic/asic-calliope.c

@@ -28,7 +28,7 @@
 
 #define CALLIOPE_ADDR(x)	(CALLIOPE_IO_BASE + (x))
 
-const struct register_map calliope_register_map __initdata = {
+const struct register_map calliope_register_map __initconst = {
 	.eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
 	.eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
 	.eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},

arch/mips/powertv/asic/asic-cronus.c

@@ -28,7 +28,7 @@
 
 #define CRONUS_ADDR(x)	(CRONUS_IO_BASE + (x))
 
-const struct register_map cronus_register_map __initdata = {
+const struct register_map cronus_register_map __initconst = {
 	.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
 	.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
 	.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},

arch/mips/powertv/asic/asic-gaia.c

@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <asm/mach-powertv/asic.h>
 
-const struct register_map gaia_register_map __initdata = {
+const struct register_map gaia_register_map __initconst = {
 	.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
 	.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
 	.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},

arch/mips/powertv/asic/asic-zeus.c

@@ -28,7 +28,7 @@
 
 #define ZEUS_ADDR(x)	(ZEUS_IO_BASE + (x))
 
-const struct register_map zeus_register_map __initdata = {
+const struct register_map zeus_register_map __initconst = {
 	.eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
 	.eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
 	.eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},

arch/mips/txx9/generic/pci.c

@@ -269,7 +269,7 @@ txx9_i8259_irq_setup(int irq)
 	return err;
 }
 
-static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit quirk_slc90e66_bridge(struct pci_dev *dev)
 {
 	int irq;	/* PCI/ISA Bridge interrupt */
 	u8 reg_64;