patch-mxc-fiq

Drivers which are going to use it will have to select it and use
mxc_set_irq_fiq() to set FIQ mode for this interrupt.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/plat-mxc/include/mach/irqs.h

@@ -14,4 +14,9 @@
 #include <mach/hardware.h>
 extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
+/* all normal IRQs can be FIQs */
+#define FIQ_START	0
+/* switch betwean IRQ and FIQ */
+extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
+
 #endif /* __ASM_ARCH_MXC_IRQS_H__ */

arch/arm/plat-mxc/irq.c

@@ -17,9 +17,11 @@
  * MA  02110-1301, USA.
  */
 
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <mach/common.h>
+#include <asm/mach/irq.h>
 
 #define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
 #define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
@@ -65,6 +67,28 @@ void imx_irq_set_priority(unsigned char irq, unsigned char prio)
 EXPORT_SYMBOL(imx_irq_set_priority);
 #endif
 
+#ifdef CONFIG_FIQ
+int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+	unsigned int irqt;
+
+	if (irq >= MXC_MAX_INT_LINES)
+		return -EINVAL;
+
+	if (irq < MXC_MAX_INT_LINES / 2) {
+		irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+	} else {
+		irq -= MXC_MAX_INT_LINES / 2;
+		irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_set_irq_fiq);
+#endif /* CONFIG_FIQ */
+
 /* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
@@ -119,5 +143,10 @@ void __init mxc_init_irq(void)
 	/* init architectures chained interrupt handler */
 	mxc_register_gpios();
 
+#ifdef CONFIG_FIQ
+	/* Initialize FIQ */
+	init_FIQ();
+#endif
+
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }