Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov:
 "Two new drivers for Elan hardware (for I2C touchpad and touchscreen
  found in several Chromebooks and other devices), a driver for Goodix
  touch panel, and small fixes to Cypress I2C trackpad and other input
  drivers.

  Also we switched to use __maybe_unused instead of gating suspend/
  resume code with #ifdef guards to get better compile coverage"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits)
  Input: gpio_keys - fix warning regarding uninitialized 'button' variable
  Input: add support for Elan eKTH I2C touchscreens
  Input: gpio_keys - fix warning regarding uninitialized  'irq' variable
  Input: cyapa - use 'error' for error codes
  Input: cyapa - fix resuming the device
  Input: gpio_keys - add device tree support for interrupt only keys
  Input: amikbd - allocate temporary keymap buffer on the stack
  Input: amikbd - fix build if !CONFIG_HW_CONSOLE
  Input: lm8323 - missing error check in lm8323_set_disable()
  Input: initialize device counter variables with -1
  Input: initialize input_no to -1 to avoid subtraction
  Input: i8042 - do not try to load on Intel NUC D54250WYK
  Input: atkbd - correct MSC_SCAN events for force_release keys
  Input: cyapa - switch to using managed resources
  Input: lifebook - use "static inline" instead of "inline" in lifebook.h
  Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resume
  Input: mouse - use __maybe_unused instead of ifdef around suspend/resume
  Input: misc - use __maybe_unused instead of ifdef around suspend/resume
  Input: cap11xx - support for irq-active-high option
  Input: cap11xx - add support for various cap11xx devices
  ...

Documentation/devicetree/bindings/input/cap1106.txt → Documentation/devicetree/bindings/input/cap11xx.txt

-Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor
+Device tree bindings for Microchip CAP11xx based capacitive touch sensors
 
-The node for this driver must be a child of a I2C controller node, as the
+The node for this device must be a child of a I2C controller node, as the
 device communication via I2C only.
 
 Required properties:
 
-	compatible:		Must be "microchip,cap1106"
+	compatible:		Must contain one of:
+					"microchip,cap1106"
+					"microchip,cap1126"
+					"microchip,cap1188"
 
 	reg:			The I2C slave address of the device.
-				Only 0x28 is valid.
 
 	interrupts:		Property describing the interrupt line the
 				device's ALERT#/CM_IRQ# pin is connected to.
@@ -26,6 +28,10 @@ Optional properties:
 				Valid values are 1, 2, 4, and 8.
 				By default, a gain of 1 is set.
 
+	microchip,irq-active-high:	By default the interrupt pin is active low
+				open drain. This property allows using the active
+				high push-pull output.
+
 	linux,keycodes:		Specifies an array of numeric keycode values to
 				be used for the channels. If this property is
 				omitted, KEY_A, KEY_B, etc are used as
@@ -43,11 +49,11 @@ i2c_controller {
 		autorepeat;
 		microchip,sensor-gain = <2>;
 
-		linux,keycodes = <103		/* KEY_UP */
-				  106		/* KEY_RIGHT */
-				  108		/* KEY_DOWN */
-				  105		/* KEY_LEFT */
-				  109		/* KEY_PAGEDOWN */
-				  104>;		/* KEY_PAGEUP */
+		linux,keycodes = <103>,		/* KEY_UP */
+				 <106>,		/* KEY_RIGHT */
+				 <108>,		/* KEY_DOWN */
+				 <105>,		/* KEY_LEFT */
+				 <109>,		/* KEY_PAGEDOWN */
+				 <104>;		/* KEY_PAGEUP */
 	};
 }

Documentation/devicetree/bindings/input/elan_i2c.txt

+Elantech I2C Touchpad
+
+Required properties:
+- compatible: must be "elan,ekth3000".
+- reg: I2C address of the chip.
+- interrupt-parent: a phandle for the interrupt controller (see interrupt
+  binding[0]).
+- interrupts: interrupt to which the chip is connected (see interrupt
+  binding[0]).
+
+Optional properties:
+- wakeup-source: touchpad can be used as a wakeup source.
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the device (see
+  pinctrl binding [1]).
+- vcc-supply: a phandle for the regulator supplying 3.3V power.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+	&i2c1 {
+		/* ... */
+
+		touchpad@15 {
+			compatible = "elan,ekth3000";
+			reg = <0x15>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		/* ... */
+	};

Documentation/devicetree/bindings/input/elants_i2c.txt

+Elantech I2C Touchscreen
+
+Required properties:
+- compatible: must be "elan,ekth3500".
+- reg: I2C address of the chip.
+- interrupt-parent: a phandle for the interrupt controller (see interrupt
+  binding[0]).
+- interrupts: interrupt to which the chip is connected (see interrupt
+  binding[0]).
+
+Optional properties:
+- wakeup-source: touchscreen can be used as a wakeup source.
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the device (see
+  pinctrl binding [1]).
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+	&i2c1 {
+		/* ... */
+
+		touchscreen@10 {
+			compatible = "elan,ekth3500";
+			reg = <0x10>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		/* ... */
+	};

Documentation/devicetree/bindings/input/gpio-keys.txt

@@ -10,10 +10,13 @@ Optional properties:
 Each button (key) is represented as a sub-node of "gpio-keys":
 Subnode properties:
 
-	- gpios: OF device-tree gpio specification.
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.
 
+Required mutual exclusive subnode-properties:
+	- gpios: OF device-tree gpio specification.
+	- interrupts: the interrupt line for that input
+
 Optional subnode-properties:
 	- linux,input-type: Specify event type this button/key generates.
 	  If not specified defaults to <1> == EV_KEY.
@@ -33,4 +36,9 @@ Example nodes:
 				linux,code = <103>;
 				gpios = <&gpio1 0 1>;
 			};
+			button@22 {
+				label = "GPIO Key DOWN";
+				linux,code = <108>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			};
 			...

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -47,6 +47,7 @@ dlink	D-Link Corporation
 dmo	Data Modul AG
 ebv	EBV Elektronik
 edt	Emerging Display Technologies
+elan	Elan Microelectronic Corp.
 emmicro	EM Microelectronic
 energymicro	Silicon Laboratories (formerly Energy Micro AS)
 epcos	EPCOS AG

MAINTAINERS

@@ -4255,6 +4255,12 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/usb/go7007/
 
+GOODIX TOUCHSCREEN
+M:	Bastien Nocera <hadess@hadess.net>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/input/touchscreen/goodix.c
+
 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
 M:	Alexandre Courbot <gnurou@gmail.com>

drivers/input/gameport/gameport.c

@@ -527,14 +527,14 @@ EXPORT_SYMBOL(gameport_set_phys);
  */
 static void gameport_init_port(struct gameport *gameport)
 {
-	static atomic_t gameport_no = ATOMIC_INIT(0);
+	static atomic_t gameport_no = ATOMIC_INIT(-1);
 
 	__module_get(THIS_MODULE);
 
 	mutex_init(&gameport->drv_mutex);
 	device_initialize(&gameport->dev);
 	dev_set_name(&gameport->dev, "gameport%lu",
-			(unsigned long)atomic_inc_return(&gameport_no) - 1);
+			(unsigned long)atomic_inc_return(&gameport_no));
 	gameport->dev.bus = &gameport_bus;
 	gameport->dev.release = gameport_release_port;
 	if (gameport->parent)

drivers/input/input.c

@@ -1775,7 +1775,7 @@ EXPORT_SYMBOL_GPL(input_class);
  */
 struct input_dev *input_allocate_device(void)
 {
-	static atomic_t input_no = ATOMIC_INIT(0);
+	static atomic_t input_no = ATOMIC_INIT(-1);
 	struct input_dev *dev;
 
 	dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL);
@@ -1790,7 +1790,7 @@ struct input_dev *input_allocate_device(void)
 		INIT_LIST_HEAD(&dev->node);
 
 		dev_set_name(&dev->dev, "input%lu",
-			     (unsigned long) atomic_inc_return(&input_no) - 1);
+			     (unsigned long)atomic_inc_return(&input_no));
 
 		__module_get(THIS_MODULE);
 	}

drivers/input/joystick/xpad.c

@@ -886,8 +886,8 @@ static void xpad_led_set(struct led_classdev *led_cdev,
 
 static int xpad_led_probe(struct usb_xpad *xpad)
 {
-	static atomic_t led_seq	= ATOMIC_INIT(0);
-	long led_no;
+	static atomic_t led_seq	= ATOMIC_INIT(-1);
+	unsigned long led_no;
 	struct xpad_led *led;
 	struct led_classdev *led_cdev;
 	int error;
@@ -899,9 +899,9 @@ static int xpad_led_probe(struct usb_xpad *xpad)
 	if (!led)
 		return -ENOMEM;
 
-	led_no = (long)atomic_inc_return(&led_seq) - 1;
+	led_no = atomic_inc_return(&led_seq);
 
-	snprintf(led->name, sizeof(led->name), "xpad%ld", led_no);
+	snprintf(led->name, sizeof(led->name), "xpad%lu", led_no);
 	led->xpad = xpad;
 
 	led_cdev = &led->led_cdev;

drivers/input/keyboard/Kconfig

@@ -665,14 +665,14 @@ config KEYBOARD_CROS_EC
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_ec_keyb.
 
-config KEYBOARD_CAP1106
-	tristate "Microchip CAP1106 touch sensor"
+config KEYBOARD_CAP11XX
+	tristate "Microchip CAP11XX based touch sensors"
 	depends on OF && I2C
 	select REGMAP_I2C
 	help
-	  Say Y here to enable the CAP1106 touch sensor driver.
+	  Say Y here to enable the CAP11XX touch sensor driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called cap1106.
+	  module will be called cap11xx.
 
 endif

drivers/input/keyboard/Makefile

@@ -11,7 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
-obj-$(CONFIG_KEYBOARD_CAP1106)		+= cap1106.o
+obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
 obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o

drivers/input/keyboard/amikbd.c

@@ -45,6 +45,7 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Amiga keyboard driver");
 MODULE_LICENSE("GPL");
 
+#ifdef CONFIG_HW_CONSOLE
 static unsigned char amikbd_keycode[0x78] __initdata = {
 	[0]	 = KEY_GRAVE,
 	[1]	 = KEY_1,
@@ -144,6 +145,32 @@ static unsigned char amikbd_keycode[0x78] __initdata = {
 	[103]	 = KEY_RIGHTMETA
 };
 
+static void __init amikbd_init_console_keymaps(void)
+{
+	/* We can spare 512 bytes on stack for temp_map in init path. */
+	unsigned short temp_map[NR_KEYS];
+	int i, j;
+
+	for (i = 0; i < MAX_NR_KEYMAPS; i++) {
+		if (!key_maps[i])
+			continue;
+		memset(temp_map, 0, sizeof(temp_map));
+		for (j = 0; j < 0x78; j++) {
+			if (!amikbd_keycode[j])
+				continue;
+			temp_map[j] = key_maps[i][amikbd_keycode[j]];
+		}
+		for (j = 0; j < NR_KEYS; j++) {
+			if (!temp_map[j])
+				temp_map[j] = 0xf200;
+		}
+		memcpy(key_maps[i], temp_map, sizeof(temp_map));
+	}
+}
+#else /* !CONFIG_HW_CONSOLE */
+static inline void amikbd_init_console_keymaps(void) {}
+#endif /* !CONFIG_HW_CONSOLE */
+
 static const char *amikbd_messages[8] = {
 	[0] = KERN_ALERT "amikbd: Ctrl-Amiga-Amiga reset warning!!\n",
 	[1] = KERN_WARNING "amikbd: keyboard lost sync\n",
@@ -186,7 +213,7 @@ static irqreturn_t amikbd_interrupt(int irq, void *data)
 static int __init amikbd_probe(struct platform_device *pdev)
 {
 	struct input_dev *dev;
-	int i, j, err;
+	int i, err;
 
 	dev = input_allocate_device();
 	if (!dev) {
@@ -207,22 +234,8 @@ static int __init amikbd_probe(struct platform_device *pdev)
 	for (i = 0; i < 0x78; i++)
 		set_bit(i, dev->keybit);
 
-	for (i = 0; i < MAX_NR_KEYMAPS; i++) {
-		static u_short temp_map[NR_KEYS] __initdata;
-		if (!key_maps[i])
-			continue;
-		memset(temp_map, 0, sizeof(temp_map));
-		for (j = 0; j < 0x78; j++) {
-			if (!amikbd_keycode[j])
-				continue;
-			temp_map[j] = key_maps[i][amikbd_keycode[j]];
-		}
-		for (j = 0; j < NR_KEYS; j++) {
-			if (!temp_map[j])
-				temp_map[j] = 0xf200;
-		}
-		memcpy(key_maps[i], temp_map, sizeof(temp_map));
-	}
+	amikbd_init_console_keymaps();
+
 	ciaa.cra &= ~0x41;	 /* serial data in, turn off TA */
 	err = request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd",
 			  dev);

drivers/input/keyboard/atkbd.c

@@ -456,6 +456,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 
 	keycode = atkbd->keycode[code];
 
+	if (!(atkbd->release && test_bit(code, atkbd->force_release_mask)))
 		if (keycode != ATKBD_KEY_NULL)
 			input_event(dev, EV_MSC, MSC_SCAN, code);
 
@@ -511,6 +512,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 		input_sync(dev);
 
 		if (value && test_bit(code, atkbd->force_release_mask)) {
+			input_event(dev, EV_MSC, MSC_SCAN, code);
 			input_report_key(dev, keycode, 0);
 			input_sync(dev);
 		}

drivers/input/keyboard/gpio_keys.c

@@ -29,6 +29,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
+#include <linux/of_irq.h>
 #include <linux/spinlock.h>
 
 struct gpio_button_data {
@@ -617,15 +618,20 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 	i = 0;
 	for_each_child_of_node(node, pp) {
-		int gpio;
+		int gpio = -1;
 		enum of_gpio_flags flags;
 
+		button = &pdata->buttons[i++];
+
 		if (!of_find_property(pp, "gpios", NULL)) {
+			button->irq = irq_of_parse_and_map(pp, 0);
+			if (button->irq == 0) {
+				i--;
 				pdata->nbuttons--;
-			dev_warn(dev, "Found button without gpios\n");
+				dev_warn(dev, "Found button without gpios or irqs\n");
 				continue;
 			}
-
+		} else {
 			gpio = of_get_gpio_flags(pp, 0, &flags);
 			if (gpio < 0) {
 				error = gpio;
@@ -635,8 +641,7 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 						error);
 				return ERR_PTR(error);
 			}
-
-		button = &pdata->buttons[i++];
+		}
 
 		button->gpio = gpio;
 		button->active_low = flags & OF_GPIO_ACTIVE_LOW;

drivers/input/keyboard/lm8323.c

@@ -616,6 +616,8 @@ static ssize_t lm8323_set_disable(struct device *dev,
 	unsigned int i;
 
 	ret = kstrtouint(buf, 10, &i);
+	if (ret)
+		return ret;
 
 	mutex_lock(&lm->lock);
 	lm->kp_enabled = !i;

drivers/input/keyboard/lpc32xx-keys.c

@@ -66,7 +66,6 @@
 struct lpc32xx_kscan_drv {
 	struct input_dev *input;
 	struct clk *clk;
-	struct resource *iores;
 	void __iomem *kscan_base;
 	unsigned int irq;
 
@@ -188,32 +187,27 @@ static int lpc32xx_kscan_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	kscandat = kzalloc(sizeof(struct lpc32xx_kscan_drv), GFP_KERNEL);
-	if (!kscandat) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	kscandat = devm_kzalloc(&pdev->dev, sizeof(*kscandat),
+				GFP_KERNEL);
+	if (!kscandat)
 		return -ENOMEM;
-	}
 
 	error = lpc32xx_parse_dt(&pdev->dev, kscandat);
 	if (error) {
 		dev_err(&pdev->dev, "failed to parse device tree\n");
-		goto err_free_mem;
+		return error;
 	}
 
 	keymap_size = sizeof(kscandat->keymap[0]) *
 				(kscandat->matrix_sz << kscandat->row_shift);
-	kscandat->keymap = kzalloc(keymap_size, GFP_KERNEL);
-	if (!kscandat->keymap) {
-		dev_err(&pdev->dev, "could not allocate memory for keymap\n");
-		error = -ENOMEM;
-		goto err_free_mem;
-	}
+	kscandat->keymap = devm_kzalloc(&pdev->dev, keymap_size, GFP_KERNEL);
+	if (!kscandat->keymap)
+		return -ENOMEM;
 
-	kscandat->input = input = input_allocate_device();
+	kscandat->input = input = devm_input_allocate_device(&pdev->dev);
 	if (!input) {
 		dev_err(&pdev->dev, "failed to allocate input device\n");
-		error = -ENOMEM;
-		goto err_free_keymap;
+		return -ENOMEM;
 	}
 
 	/* Setup key input */
@@ -234,39 +228,26 @@ static int lpc32xx_kscan_probe(struct platform_device *pdev)
 					   kscandat->keymap, kscandat->input);
 	if (error) {
 		dev_err(&pdev->dev, "failed to build keymap\n");
-		goto err_free_input;
+		return error;
 	}
 
 	input_set_drvdata(kscandat->input, kscandat);
 
-	kscandat->iores = request_mem_region(res->start, resource_size(res),
-					     pdev->name);
-	if (!kscandat->iores) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		error = -EBUSY;
-		goto err_free_input;
-	}
-
-	kscandat->kscan_base = ioremap(kscandat->iores->start,
-				       resource_size(kscandat->iores));
-	if (!kscandat->kscan_base) {
-		dev_err(&pdev->dev, "failed to remap I/O memory\n");
-		error = -EBUSY;
-		goto err_release_memregion;
-	}
+	kscandat->kscan_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kscandat->kscan_base))
+		return PTR_ERR(kscandat->kscan_base);
 
 	/* Get the key scanner clock */
-	kscandat->clk = clk_get(&pdev->dev, NULL);
+	kscandat->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(kscandat->clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
-		error = PTR_ERR(kscandat->clk);
-		goto err_unmap;
+		return PTR_ERR(kscandat->clk);
 	}
 
 	/* Configure the key scanner */
 	error = clk_prepare_enable(kscandat->clk);
 	if (error)
-		goto err_clk_put;
+		return error;
 
 	writel(kscandat->deb_clks, LPC32XX_KS_DEB(kscandat->kscan_base));
 	writel(kscandat->scan_delay, LPC32XX_KS_SCAN_CTL(kscandat->kscan_base));
@@ -277,52 +258,20 @@ static int lpc32xx_kscan_probe(struct platform_device *pdev)
 	writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
 	clk_disable_unprepare(kscandat->clk);
 
-	error = request_irq(irq, lpc32xx_kscan_irq, 0, pdev->name, kscandat);
+	error = devm_request_irq(&pdev->dev, irq, lpc32xx_kscan_irq, 0,
+				 pdev->name, kscandat);
 	if (error) {
 		dev_err(&pdev->dev, "failed to request irq\n");
-		goto err_clk_put;
+		return error;
 	}
 
 	error = input_register_device(kscandat->input);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		goto err_free_irq;
+		return error;
 	}
 
 	platform_set_drvdata(pdev, kscandat);
-	return 0;
-
-err_free_irq:
-	free_irq(irq, kscandat);
-err_clk_put:
-	clk_put(kscandat->clk);
-err_unmap:
-	iounmap(kscandat->kscan_base);
-err_release_memregion:
-	release_mem_region(kscandat->iores->start,
-			   resource_size(kscandat->iores));
-err_free_input:
-	input_free_device(kscandat->input);
-err_free_keymap:
-	kfree(kscandat->keymap);
-err_free_mem:
-	kfree(kscandat);
-
-	return error;
-}
-
-static int lpc32xx_kscan_remove(struct platform_device *pdev)
-{
-	struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
-
-	free_irq(platform_get_irq(pdev, 0), kscandat);
-	clk_put(kscandat->clk);
-	iounmap(kscandat->kscan_base);
-	release_mem_region(kscandat->iores->start,
-			   resource_size(kscandat->iores));
-	input_unregister_device(kscandat->input);
-	kfree(kscandat->keymap);
-	kfree(kscandat);
 
 	return 0;
 }
@@ -378,7 +327,6 @@ MODULE_DEVICE_TABLE(of, lpc32xx_kscan_match);
 
 static struct platform_driver lpc32xx_kscan_driver = {
 	.probe		= lpc32xx_kscan_probe,
-	.remove		= lpc32xx_kscan_remove,
 	.driver		= {
 		.name	= DRV_NAME,
 		.pm	= &lpc32xx_kscan_pm_ops,

drivers/input/keyboard/mpr121_touchkey.c

@@ -214,13 +214,14 @@ static int mpr_touchkey_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	mpr121 = kzalloc(sizeof(struct mpr121_touchkey), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!mpr121 || !input_dev) {
-		dev_err(&client->dev, "Failed to allocate memory\n");
-		error = -ENOMEM;
-		goto err_free_mem;
-	}
+	mpr121 = devm_kzalloc(&client->dev, sizeof(*mpr121),
+			      GFP_KERNEL);
+	if (!mpr121)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev)
+		return -ENOMEM;
 
 	mpr121->client = client;
 	mpr121->input_dev = input_dev;
@@ -243,43 +244,25 @@ static int mpr_touchkey_probe(struct i2c_client *client,
 	error = mpr121_phys_init(pdata, mpr121, client);
 	if (error) {
 		dev_err(&client->dev, "Failed to init register\n");
-		goto err_free_mem;
+		return error;
 	}
 
-	error = request_threaded_irq(client->irq, NULL,
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
 				     mpr_touchkey_interrupt,
 				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 				     client->dev.driver->name, mpr121);
 	if (error) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
-		goto err_free_mem;
+		return error;
 	}
 
 	error = input_register_device(input_dev);
 	if (error)
-		goto err_free_irq;
+		return error;
 
 	i2c_set_clientdata(client, mpr121);
 	device_init_wakeup(&client->dev, pdata->wakeup);
 
-	return 0;
-
-err_free_irq:
-	free_irq(client->irq, mpr121);
-err_free_mem:
-	input_free_device(input_dev);
-	kfree(mpr121);
-	return error;
-}
-
-static int mpr_touchkey_remove(struct i2c_client *client)
-{
-	struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
-
-	free_irq(client->irq, mpr121);
-	input_unregister_device(mpr121->input_dev);
-	kfree(mpr121);
-
 	return 0;
 }
 
@@ -327,7 +310,6 @@ static struct i2c_driver mpr_touchkey_driver = {
 	},
 	.id_table	= mpr121_id,
 	.probe		= mpr_touchkey_probe,
-	.remove		= mpr_touchkey_remove,
 };
 
 module_i2c_driver(mpr_touchkey_driver);

drivers/input/keyboard/pxa27x_keypad.c

@@ -741,37 +741,27 @@ static int pxa27x_keypad_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
-	keypad = kzalloc(sizeof(struct pxa27x_keypad), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!keypad || !input_dev) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		error = -ENOMEM;
-		goto failed_free;
-	}
+	keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad),
+			      GFP_KERNEL);
+	if (!keypad)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return -ENOMEM;
 
 	keypad->pdata = pdata;
 	keypad->input_dev = input_dev;
 	keypad->irq = irq;
 
-	res = request_mem_region(res->start, resource_size(res), pdev->name);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		error = -EBUSY;
-		goto failed_free;
-	}
-
-	keypad->mmio_base = ioremap(res->start, resource_size(res));
-	if (keypad->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to remap I/O memory\n");
-		error = -ENXIO;
-		goto failed_free_mem;
-	}
+	keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(keypad->mmio_base))
+		return PTR_ERR(keypad->mmio_base);
 
-	keypad->clk = clk_get(&pdev->dev, NULL);
+	keypad->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(keypad->clk)) {
 		dev_err(&pdev->dev, "failed to get keypad clock\n");
-		error = PTR_ERR(keypad->clk);
-		goto failed_free_io;
+		return PTR_ERR(keypad->clk);
 	}
 
 	input_dev->name = pdev->name;
@@ -802,7 +792,7 @@ static int pxa27x_keypad_probe(struct platform_device *pdev)
 	}
 	if (error) {
 		dev_err(&pdev->dev, "failed to build keycode\n");
-		goto failed_put_clk;
+		return error;
 	}
 
 	keypad->row_shift = get_count_order(pdata->matrix_key_cols);
@@ -812,61 +802,26 @@ static int pxa27x_keypad_probe(struct platform_device *pdev)
 		input_dev->evbit[0] |= BIT_MASK(EV_REL);
 	}
 
-	error = request_irq(irq, pxa27x_keypad_irq_handler, 0,
-			    pdev->name, keypad);
+	error = devm_request_irq(&pdev->dev, irq, pxa27x_keypad_irq_handler,
+				 0, pdev->name, keypad);
 	if (error) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
-		goto failed_put_clk;
+		return error;
 	}
 
 	/* Register the input device */
 	error = input_register_device(input_dev);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		goto failed_free_irq;
+		return error;
 	}
 
 	platform_set_drvdata(pdev, keypad);
 	device_init_wakeup(&pdev->dev, 1);
 
-	return 0;
-
-failed_free_irq:
-	free_irq(irq, keypad);
-failed_put_clk:
-	clk_put(keypad->clk);
-failed_free_io:
-	iounmap(keypad->mmio_base);
-failed_free_mem:
-	release_mem_region(res->start, resource_size(res));
-failed_free:
-	input_free_device(input_dev);
-	kfree(keypad);
-	return error;
-}
-
-static int pxa27x_keypad_remove(struct platform_device *pdev)
-{
-	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	free_irq(keypad->irq, keypad);
-	clk_put(keypad->clk);
-
-	input_unregister_device(keypad->input_dev);
-	iounmap(keypad->mmio_base);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	kfree(keypad);
-
 	return 0;
 }
 
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:pxa27x-keypad");
-
 #ifdef CONFIG_OF
 static const struct of_device_id pxa27x_keypad_dt_match[] = {
 	{ .compatible = "marvell,pxa27x-keypad" },
@@ -877,7 +832,6 @@ MODULE_DEVICE_TABLE(of, pxa27x_keypad_dt_match);
 
 static struct platform_driver pxa27x_keypad_driver = {
 	.probe		= pxa27x_keypad_probe,
-	.remove		= pxa27x_keypad_remove,
 	.driver		= {
 		.name	= "pxa27x-keypad",
 		.of_match_table = of_match_ptr(pxa27x_keypad_dt_match),
@@ -888,3 +842,5 @@ module_platform_driver(pxa27x_keypad_driver);
 
 MODULE_DESCRIPTION("PXA27x Keypad Controller Driver");
 MODULE_LICENSE("GPL");
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa27x-keypad");

drivers/input/misc/88pm860x_onkey.c

@@ -112,8 +112,7 @@ static int pm860x_onkey_probe(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int pm860x_onkey_suspend(struct device *dev)
+static int __maybe_unused pm860x_onkey_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -122,7 +121,7 @@ static int pm860x_onkey_suspend(struct device *dev)
 		chip->wakeup_flag |= 1 << PM8607_IRQ_ONKEY;
 	return 0;
 }
-static int pm860x_onkey_resume(struct device *dev)
+static int __maybe_unused pm860x_onkey_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
@@ -131,7 +130,6 @@ static int pm860x_onkey_resume(struct device *dev)
 		chip->wakeup_flag &= ~(1 << PM8607_IRQ_ONKEY);
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(pm860x_onkey_pm_ops, pm860x_onkey_suspend, pm860x_onkey_resume);
 

drivers/input/misc/ad714x-i2c.c

@@ -13,17 +13,15 @@
 #include <linux/pm.h>
 #include "ad714x.h"
 
-#ifdef CONFIG_PM_SLEEP
-static int ad714x_i2c_suspend(struct device *dev)
+static int __maybe_unused ad714x_i2c_suspend(struct device *dev)
 {
 	return ad714x_disable(i2c_get_clientdata(to_i2c_client(dev)));
 }
 
-static int ad714x_i2c_resume(struct device *dev)
+static int __maybe_unused ad714x_i2c_resume(struct device *dev)
 {
 	return ad714x_enable(i2c_get_clientdata(to_i2c_client(dev)));
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(ad714x_i2c_pm, ad714x_i2c_suspend, ad714x_i2c_resume);
 

drivers/input/misc/ad714x-spi.c

@@ -16,17 +16,15 @@
 #define AD714x_SPI_CMD_PREFIX      0xE000   /* bits 15:11 */
 #define AD714x_SPI_READ            BIT(10)
 
-#ifdef CONFIG_PM_SLEEP
-static int ad714x_spi_suspend(struct device *dev)
+static int __maybe_unused ad714x_spi_suspend(struct device *dev)
 {
 	return ad714x_disable(spi_get_drvdata(to_spi_device(dev)));
 }
 
-static int ad714x_spi_resume(struct device *dev)
+static int __maybe_unused ad714x_spi_resume(struct device *dev)
 {
 	return ad714x_enable(spi_get_drvdata(to_spi_device(dev)));
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume);
 

drivers/input/misc/adxl34x-i2c.c

@@ -105,8 +105,7 @@ static int adxl34x_i2c_remove(struct i2c_client *client)
 	return adxl34x_remove(ac);
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int adxl34x_i2c_suspend(struct device *dev)
+static int __maybe_unused adxl34x_i2c_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adxl34x *ac = i2c_get_clientdata(client);
@@ -116,7 +115,7 @@ static int adxl34x_i2c_suspend(struct device *dev)
 	return 0;
 }
 
-static int adxl34x_i2c_resume(struct device *dev)
+static int __maybe_unused adxl34x_i2c_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adxl34x *ac = i2c_get_clientdata(client);
@@ -125,7 +124,6 @@ static int adxl34x_i2c_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(adxl34x_i2c_pm, adxl34x_i2c_suspend,
 			 adxl34x_i2c_resume);

drivers/input/misc/adxl34x-spi.c

@@ -94,8 +94,7 @@ static int adxl34x_spi_remove(struct spi_device *spi)
 	return adxl34x_remove(ac);
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int adxl34x_spi_suspend(struct device *dev)
+static int __maybe_unused adxl34x_spi_suspend(struct device *dev)
 {
 	struct spi_device *spi = to_spi_device(dev);
 	struct adxl34x *ac = spi_get_drvdata(spi);
@@ -105,7 +104,7 @@ static int adxl34x_spi_suspend(struct device *dev)
 	return 0;
 }
 
-static int adxl34x_spi_resume(struct device *dev)
+static int __maybe_unused adxl34x_spi_resume(struct device *dev)
 {
 	struct spi_device *spi = to_spi_device(dev);
 	struct adxl34x *ac = spi_get_drvdata(spi);
@@ -114,7 +113,6 @@ static int adxl34x_spi_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(adxl34x_spi_pm, adxl34x_spi_suspend,
 			 adxl34x_spi_resume);

drivers/input/misc/drv260x.c

@@ -639,8 +639,7 @@ static int drv260x_probe(struct i2c_client *client,
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int drv260x_suspend(struct device *dev)
+static int __maybe_unused drv260x_suspend(struct device *dev)
 {
 	struct drv260x_data *haptics = dev_get_drvdata(dev);
 	int ret = 0;
@@ -672,7 +671,7 @@ static int drv260x_suspend(struct device *dev)
 	return ret;
 }
 
-static int drv260x_resume(struct device *dev)
+static int __maybe_unused drv260x_resume(struct device *dev)
 {
 	struct drv260x_data *haptics = dev_get_drvdata(dev);
 	int ret = 0;
@@ -702,7 +701,6 @@ static int drv260x_resume(struct device *dev)
 	mutex_unlock(&haptics->input_dev->mutex);
 	return ret;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(drv260x_pm_ops, drv260x_suspend, drv260x_resume);
 

drivers/input/misc/drv2667.c

@@ -406,8 +406,7 @@ static int drv2667_probe(struct i2c_client *client,
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int drv2667_suspend(struct device *dev)
+static int __maybe_unused drv2667_suspend(struct device *dev)
 {
 	struct drv2667_data *haptics = dev_get_drvdata(dev);
 	int ret = 0;
@@ -436,7 +435,7 @@ static int drv2667_suspend(struct device *dev)
 	return ret;
 }
 
-static int drv2667_resume(struct device *dev)
+static int __maybe_unused drv2667_resume(struct device *dev)
 {
 	struct drv2667_data *haptics = dev_get_drvdata(dev);
 	int ret = 0;
@@ -464,7 +463,6 @@ static int drv2667_resume(struct device *dev)
 	mutex_unlock(&haptics->input_dev->mutex);
 	return ret;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(drv2667_pm_ops, drv2667_suspend, drv2667_resume);
 

drivers/input/misc/gp2ap002a00f.c

@@ -225,8 +225,7 @@ static int gp2a_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int gp2a_suspend(struct device *dev)
+static int __maybe_unused gp2a_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct gp2a_data *dt = i2c_get_clientdata(client);
@@ -244,7 +243,7 @@ static int gp2a_suspend(struct device *dev)
 	return retval;
 }
 
-static int gp2a_resume(struct device *dev)
+static int __maybe_unused gp2a_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct gp2a_data *dt = i2c_get_clientdata(client);
@@ -261,7 +260,6 @@ static int gp2a_resume(struct device *dev)
 
 	return retval;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);
 

drivers/input/misc/ims-pcu.c

@@ -1851,7 +1851,7 @@ static int ims_pcu_identify_type(struct ims_pcu *pcu, u8 *device_id)
 
 static int ims_pcu_init_application_mode(struct ims_pcu *pcu)
 {
-	static atomic_t device_no = ATOMIC_INIT(0);
+	static atomic_t device_no = ATOMIC_INIT(-1);
 
 	const struct ims_pcu_device_info *info;
 	int error;
@@ -1882,7 +1882,7 @@ static int ims_pcu_init_application_mode(struct ims_pcu *pcu)
 	}
 
 	/* Device appears to be operable, complete initialization */
-	pcu->device_no = atomic_inc_return(&device_no) - 1;
+	pcu->device_no = atomic_inc_return(&device_no);
 
 	/*
 	 * PCU-B devices, both GEN_1 and GEN_2 do not have OFN sensor

drivers/input/misc/kxtj9.c

@@ -615,8 +615,7 @@ static int kxtj9_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int kxtj9_suspend(struct device *dev)
+static int __maybe_unused kxtj9_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct kxtj9_data *tj9 = i2c_get_clientdata(client);
@@ -631,7 +630,7 @@ static int kxtj9_suspend(struct device *dev)
 	return 0;
 }
 
-static int kxtj9_resume(struct device *dev)
+static int __maybe_unused kxtj9_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct kxtj9_data *tj9 = i2c_get_clientdata(client);
@@ -646,7 +645,6 @@ static int kxtj9_resume(struct device *dev)
 	mutex_unlock(&input_dev->mutex);
 	return retval;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(kxtj9_pm_ops, kxtj9_suspend, kxtj9_resume);
 

drivers/input/misc/max77693-haptic.c

@@ -309,8 +309,7 @@ static int max77693_haptic_probe(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int max77693_haptic_suspend(struct device *dev)
+static int __maybe_unused max77693_haptic_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct max77693_haptic *haptic = platform_get_drvdata(pdev);
@@ -323,7 +322,7 @@ static int max77693_haptic_suspend(struct device *dev)
 	return 0;
 }
 
-static int max77693_haptic_resume(struct device *dev)
+static int __maybe_unused max77693_haptic_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct max77693_haptic *haptic = platform_get_drvdata(pdev);
@@ -335,7 +334,6 @@ static int max77693_haptic_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops,
 			 max77693_haptic_suspend, max77693_haptic_resume);

drivers/input/misc/max8925_onkey.c

@@ -133,8 +133,7 @@ static int max8925_onkey_probe(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int max8925_onkey_suspend(struct device *dev)
+static int __maybe_unused max8925_onkey_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct max8925_onkey_info *info = platform_get_drvdata(pdev);
@@ -148,7 +147,7 @@ static int max8925_onkey_suspend(struct device *dev)
 	return 0;
 }
 
-static int max8925_onkey_resume(struct device *dev)
+static int __maybe_unused max8925_onkey_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct max8925_onkey_info *info = platform_get_drvdata(pdev);
@@ -161,7 +160,6 @@ static int max8925_onkey_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(max8925_onkey_pm_ops, max8925_onkey_suspend, max8925_onkey_resume);
 

drivers/input/misc/max8997_haptic.c

@@ -378,8 +378,7 @@ static int max8997_haptic_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int max8997_haptic_suspend(struct device *dev)
+static int __maybe_unused max8997_haptic_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct max8997_haptic *chip = platform_get_drvdata(pdev);
@@ -388,7 +387,6 @@ static int max8997_haptic_suspend(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(max8997_haptic_pm_ops, max8997_haptic_suspend, NULL);
 

drivers/input/misc/palmas-pwrbutton.c

@@ -260,7 +260,6 @@ static int palmas_pwron_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
 /**
  * palmas_pwron_suspend() - suspend handler
  * @dev:	power button device
@@ -269,7 +268,7 @@ static int palmas_pwron_remove(struct platform_device *pdev)
  *
  * Return: 0
  */
-static int palmas_pwron_suspend(struct device *dev)
+static int __maybe_unused palmas_pwron_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct palmas_pwron *pwron = platform_get_drvdata(pdev);
@@ -290,7 +289,7 @@ static int palmas_pwron_suspend(struct device *dev)
  *
  * Return: 0
  */
-static int palmas_pwron_resume(struct device *dev)
+static int __maybe_unused palmas_pwron_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct palmas_pwron *pwron = platform_get_drvdata(pdev);
@@ -300,7 +299,6 @@ static int palmas_pwron_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(palmas_pwron_pm,
 			 palmas_pwron_suspend, palmas_pwron_resume);

drivers/input/misc/pm8xxx-vibrator.c

@@ -199,8 +199,7 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int pm8xxx_vib_suspend(struct device *dev)
+static int __maybe_unused pm8xxx_vib_suspend(struct device *dev)
 {
 	struct pm8xxx_vib *vib = dev_get_drvdata(dev);
 
@@ -209,7 +208,6 @@ static int pm8xxx_vib_suspend(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL);
 

drivers/input/misc/pmic8xxx-pwrkey.c

@@ -53,8 +53,7 @@ static irqreturn_t pwrkey_release_irq(int irq, void *_pwr)
 	return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int pmic8xxx_pwrkey_suspend(struct device *dev)
+static int __maybe_unused pmic8xxx_pwrkey_suspend(struct device *dev)
 {
 	struct pmic8xxx_pwrkey *pwrkey = dev_get_drvdata(dev);
 
@@ -64,7 +63,7 @@ static int pmic8xxx_pwrkey_suspend(struct device *dev)
 	return 0;
 }
 
-static int pmic8xxx_pwrkey_resume(struct device *dev)
+static int __maybe_unused pmic8xxx_pwrkey_resume(struct device *dev)
 {
 	struct pmic8xxx_pwrkey *pwrkey = dev_get_drvdata(dev);
 
@@ -73,7 +72,6 @@ static int pmic8xxx_pwrkey_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(pm8xxx_pwr_key_pm_ops,
 		pmic8xxx_pwrkey_suspend, pmic8xxx_pwrkey_resume);

drivers/input/misc/pwm-beeper.c

@@ -144,8 +144,7 @@ static int pwm_beeper_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int pwm_beeper_suspend(struct device *dev)
+static int __maybe_unused pwm_beeper_suspend(struct device *dev)
 {
 	struct pwm_beeper *beeper = dev_get_drvdata(dev);
 
@@ -155,7 +154,7 @@ static int pwm_beeper_suspend(struct device *dev)
 	return 0;
 }
 
-static int pwm_beeper_resume(struct device *dev)
+static int __maybe_unused pwm_beeper_resume(struct device *dev)
 {
 	struct pwm_beeper *beeper = dev_get_drvdata(dev);
 
@@ -170,6 +169,7 @@ static int pwm_beeper_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(pwm_beeper_pm_ops,
 			 pwm_beeper_suspend, pwm_beeper_resume);
 
+#ifdef CONFIG_PM_SLEEP
 #define PWM_BEEPER_PM_OPS (&pwm_beeper_pm_ops)
 #else
 #define PWM_BEEPER_PM_OPS NULL

drivers/input/misc/sirfsoc-onkey.c

@@ -179,8 +179,7 @@ static int sirfsoc_pwrc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int sirfsoc_pwrc_resume(struct device *dev)
+static int __maybe_unused sirfsoc_pwrc_resume(struct device *dev)
 {
 	struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_get_drvdata(dev);
 	struct input_dev *input = pwrcdrv->input;
@@ -196,7 +195,6 @@ static int sirfsoc_pwrc_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, sirfsoc_pwrc_resume);
 

drivers/input/misc/twl4030-vibra.c

@@ -157,8 +157,7 @@ static void twl4030_vibra_close(struct input_dev *input)
 }
 
 /*** Module ***/
-#ifdef CONFIG_PM_SLEEP
-static int twl4030_vibra_suspend(struct device *dev)
+static int __maybe_unused twl4030_vibra_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct vibra_info *info = platform_get_drvdata(pdev);
@@ -169,12 +168,11 @@ static int twl4030_vibra_suspend(struct device *dev)
 	return 0;
 }
 
-static int twl4030_vibra_resume(struct device *dev)
+static int __maybe_unused twl4030_vibra_resume(struct device *dev)
 {
 	vibra_disable_leds();
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops,
 			 twl4030_vibra_suspend, twl4030_vibra_resume);

drivers/input/misc/twl6040-vibra.c

@@ -236,8 +236,7 @@ static void twl6040_vibra_close(struct input_dev *input)
 	mutex_unlock(&info->mutex);
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int twl6040_vibra_suspend(struct device *dev)
+static int __maybe_unused twl6040_vibra_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct vibra_info *info = platform_get_drvdata(pdev);
@@ -251,7 +250,6 @@ static int twl6040_vibra_suspend(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
 

drivers/input/mouse/Kconfig

@@ -215,6 +215,36 @@ config MOUSE_CYAPA
 	  To compile this driver as a module, choose M here: the module will be
 	  called cyapa.
 
+config MOUSE_ELAN_I2C
+	tristate "ELAN I2C Touchpad support"
+	depends on I2C
+	help
+	  This driver adds support for Elan I2C/SMbus Trackpads.
+
+	  Say Y here if you have a ELAN I2C/SMbus Touchpad.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called elan_i2c.
+
+config MOUSE_ELAN_I2C_I2C
+	bool "Enable I2C support"
+	depends on MOUSE_ELAN_I2C
+	default y
+	help
+	   Say Y here if Elan Touchpad in your system is connected to
+	   a standard I2C controller.
+
+	   If unsure, say Y.
+
+config MOUSE_ELAN_I2C_SMBUS
+	bool "Enable SMbus support"
+	depends on MOUSE_ELAN_I2C
+	help
+	   Say Y here if Elan Touchpad in your system is connected to
+	   a SMbus adapter.
+
+	   If unsure, say Y.
+
 config MOUSE_INPORT
 	tristate "InPort/MS/ATIXL busmouse"
 	depends on ISA

drivers/input/mouse/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_MOUSE_APPLETOUCH)		+= appletouch.o
 obj-$(CONFIG_MOUSE_ATARI)		+= atarimouse.o
 obj-$(CONFIG_MOUSE_BCM5974)		+= bcm5974.o
 obj-$(CONFIG_MOUSE_CYAPA)		+= cyapa.o
+obj-$(CONFIG_MOUSE_ELAN_I2C)		+= elan_i2c.o
 obj-$(CONFIG_MOUSE_GPIO)		+= gpio_mouse.o
 obj-$(CONFIG_MOUSE_INPORT)		+= inport.o
 obj-$(CONFIG_MOUSE_LOGIBM)		+= logibm.o
@@ -34,3 +35,7 @@ psmouse-$(CONFIG_MOUSE_PS2_SENTELIC)	+= sentelic.o
 psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT)	+= trackpoint.o
 psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT)	+= touchkit_ps2.o
 psmouse-$(CONFIG_MOUSE_PS2_CYPRESS)	+= cypress_ps2.o
+
+elan_i2c-objs := elan_i2c_core.o
+elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_I2C)	+= elan_i2c_i2c.o
+elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_SMBUS)	+= elan_i2c_smbus.o

drivers/input/mouse/elan_i2c.h

+/*
+ * Elan I2C/SMBus Touchpad driver
+ *
+ * Copyright (c) 2013 ELAN Microelectronics Corp.
+ *
+ * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
+ * Version: 1.5.5
+ *
+ * Based on cyapa driver:
+ * copyright (c) 2011-2012 Cypress Semiconductor, Inc.
+ * copyright (c) 2011-2012 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Trademarks are the property of their respective owners.
+ */
+
+#ifndef _ELAN_I2C_H
+#define _ELAN_i2C_H
+
+#include <linux/types.h>
+
+#define ETP_ENABLE_ABS		0x0001
+#define ETP_ENABLE_CALIBRATE	0x0002
+#define ETP_DISABLE_CALIBRATE	0x0000
+#define ETP_DISABLE_POWER	0x0001
+
+/* IAP Firmware handling */
+#define ETP_FW_NAME		"elan_i2c.bin"
+#define ETP_IAP_START_ADDR	0x0083
+#define ETP_FW_IAP_PAGE_ERR	(1 << 5)
+#define ETP_FW_IAP_INTF_ERR	(1 << 4)
+#define ETP_FW_PAGE_SIZE	64
+#define ETP_FW_PAGE_COUNT	768
+#define ETP_FW_SIZE		(ETP_FW_PAGE_SIZE * ETP_FW_PAGE_COUNT)
+
+struct i2c_client;
+struct completion;
+
+enum tp_mode {
+	IAP_MODE = 1,
+	MAIN_MODE
+};
+
+struct elan_transport_ops {
+	int (*initialize)(struct i2c_client *client);
+	int (*sleep_control)(struct i2c_client *, bool sleep);
+	int (*power_control)(struct i2c_client *, bool enable);
+	int (*set_mode)(struct i2c_client *client, u8 mode);
+
+	int (*calibrate)(struct i2c_client *client);
+	int (*calibrate_result)(struct i2c_client *client, u8 *val);
+
+	int (*get_baseline_data)(struct i2c_client *client,
+				 bool max_baseliune, u8 *value);
+
+	int (*get_version)(struct i2c_client *client, bool iap, u8 *version);
+	int (*get_sm_version)(struct i2c_client *client, u8 *version);
+	int (*get_checksum)(struct i2c_client *client, bool iap, u16 *csum);
+	int (*get_product_id)(struct i2c_client *client, u8 *id);
+
+	int (*get_max)(struct i2c_client *client,
+		       unsigned int *max_x, unsigned int *max_y);
+	int (*get_resolution)(struct i2c_client *client,
+			      u8 *hw_res_x, u8 *hw_res_y);
+	int (*get_num_traces)(struct i2c_client *client,
+			      unsigned int *x_tracenum,
+			      unsigned int *y_tracenum);
+
+	int (*iap_get_mode)(struct i2c_client *client, enum tp_mode *mode);
+	int (*iap_reset)(struct i2c_client *client);
+
+	int (*prepare_fw_update)(struct i2c_client *client);
+	int (*write_fw_block)(struct i2c_client *client,
+			      const u8 *page, u16 checksum, int idx);
+	int (*finish_fw_update)(struct i2c_client *client,
+				struct completion *reset_done);
+
+	int (*get_report)(struct i2c_client *client, u8 *report);
+};
+
+extern const struct elan_transport_ops elan_smbus_ops, elan_i2c_ops;
+
+#endif /* _ELAN_I2C_H */

drivers/input/mouse/lifebook.h

@@ -16,14 +16,14 @@ void lifebook_module_init(void);
 int lifebook_detect(struct psmouse *psmouse, bool set_properties);
 int lifebook_init(struct psmouse *psmouse);
 #else
-inline void lifebook_module_init(void)
+static inline void lifebook_module_init(void)
 {
 }
-inline int lifebook_detect(struct psmouse *psmouse, bool set_properties)
+static inline int lifebook_detect(struct psmouse *psmouse, bool set_properties)
 {
 	return -ENOSYS;
 }
-inline int lifebook_init(struct psmouse *psmouse)
+static inline int lifebook_init(struct psmouse *psmouse)
 {
 	return -ENOSYS;
 }

drivers/input/mouse/navpoint.c

@@ -318,8 +318,7 @@ static int navpoint_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int navpoint_suspend(struct device *dev)
+static int __maybe_unused navpoint_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct navpoint *navpoint = platform_get_drvdata(pdev);
@@ -333,7 +332,7 @@ static int navpoint_suspend(struct device *dev)
 	return 0;
 }
 
-static int navpoint_resume(struct device *dev)
+static int __maybe_unused navpoint_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct navpoint *navpoint = platform_get_drvdata(pdev);
@@ -346,7 +345,6 @@ static int navpoint_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(navpoint_pm_ops, navpoint_suspend, navpoint_resume);
 

drivers/input/mouse/synaptics_i2c.c

@@ -614,8 +614,7 @@ static int synaptics_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int synaptics_i2c_suspend(struct device *dev)
+static int __maybe_unused synaptics_i2c_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct synaptics_i2c *touch = i2c_get_clientdata(client);
@@ -628,7 +627,7 @@ static int synaptics_i2c_suspend(struct device *dev)
 	return 0;
 }
 
-static int synaptics_i2c_resume(struct device *dev)
+static int __maybe_unused synaptics_i2c_resume(struct device *dev)
 {
 	int ret;
 	struct i2c_client *client = to_i2c_client(dev);
@@ -643,7 +642,6 @@ static int synaptics_i2c_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(synaptics_i2c_pm, synaptics_i2c_suspend,
 			 synaptics_i2c_resume);

drivers/input/serio/altera_ps2.c

@@ -24,9 +24,7 @@
 
 struct ps2if {
 	struct serio *io;
-	struct resource *iomem_res;
 	void __iomem *base;
-	unsigned irq;
 };
 
 /*
@@ -83,16 +81,34 @@ static void altera_ps2_close(struct serio *io)
 static int altera_ps2_probe(struct platform_device *pdev)
 {
 	struct ps2if *ps2if;
+	struct resource *res;
 	struct serio *serio;
 	int error, irq;
 
-	ps2if = kzalloc(sizeof(struct ps2if), GFP_KERNEL);
-	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
-	if (!ps2if || !serio) {
-		error = -ENOMEM;
-		goto err_free_mem;
+	ps2if = devm_kzalloc(&pdev->dev, sizeof(struct ps2if), GFP_KERNEL);
+	if (!ps2if)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ps2if->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ps2if->base))
+		return PTR_ERR(ps2if->base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	error = devm_request_irq(&pdev->dev, irq, altera_ps2_rxint, 0,
+				 pdev->name, ps2if);
+	if (error) {
+		dev_err(&pdev->dev, "could not request IRQ %d\n", irq);
+		return error;
 	}
 
+	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!serio)
+		return -ENOMEM;
+
 	serio->id.type		= SERIO_8042;
 	serio->write		= altera_ps2_write;
 	serio->open		= altera_ps2_open;
@@ -103,56 +119,12 @@ static int altera_ps2_probe(struct platform_device *pdev)
 	serio->dev.parent	= &pdev->dev;
 	ps2if->io		= serio;
 
-	ps2if->iomem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (ps2if->iomem_res == NULL) {
-		error = -ENOENT;
-		goto err_free_mem;
-	}
-
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		error = -ENXIO;
-		goto err_free_mem;
-	}
-	ps2if->irq = irq;
-
-	if (!request_mem_region(ps2if->iomem_res->start,
-				resource_size(ps2if->iomem_res), pdev->name)) {
-		error = -EBUSY;
-		goto err_free_mem;
-	}
-
-	ps2if->base = ioremap(ps2if->iomem_res->start,
-			      resource_size(ps2if->iomem_res));
-	if (!ps2if->base) {
-		error = -ENOMEM;
-		goto err_free_res;
-	}
-
-	error = request_irq(ps2if->irq, altera_ps2_rxint, 0, pdev->name, ps2if);
-	if (error) {
-		dev_err(&pdev->dev, "could not allocate IRQ %d: %d\n",
-			ps2if->irq, error);
-		goto err_unmap;
-	}
-
-	dev_info(&pdev->dev, "base %p, irq %d\n", ps2if->base, ps2if->irq);
+	dev_info(&pdev->dev, "base %p, irq %d\n", ps2if->base, irq);
 
 	serio_register_port(ps2if->io);
 	platform_set_drvdata(pdev, ps2if);
 
 	return 0;
-
- err_unmap:
-	iounmap(ps2if->base);
- err_free_res:
-	release_mem_region(ps2if->iomem_res->start,
-			   resource_size(ps2if->iomem_res));
- err_free_mem:
-	kfree(ps2if);
-	kfree(serio);
-	return error;
 }
 
 /*
@@ -163,11 +135,6 @@ static int altera_ps2_remove(struct platform_device *pdev)
 	struct ps2if *ps2if = platform_get_drvdata(pdev);
 
 	serio_unregister_port(ps2if->io);
-	free_irq(ps2if->irq, ps2if);
-	iounmap(ps2if->base);
-	release_mem_region(ps2if->iomem_res->start,
-			   resource_size(ps2if->iomem_res));
-	kfree(ps2if);
 
 	return 0;
 }

drivers/input/serio/i8042-x86ia64io.h

@@ -578,6 +578,16 @@ static const struct dmi_system_id __initconst i8042_dmi_nopnp_table[] = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
 		},
 	},
+	{
+		/*
+		 * Intel NUC D54250WYK - does not have i8042 controller but
+		 * declares PS/2 devices in DSDT.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "D54250WYK"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+		},
+	},
 	{
 		/* MSI Wind U-100 */
 		.matches = {

drivers/input/serio/serio.c

@@ -514,7 +514,7 @@ static void serio_release_port(struct device *dev)
  */
 static void serio_init_port(struct serio *serio)
 {
-	static atomic_t serio_no = ATOMIC_INIT(0);
+	static atomic_t serio_no = ATOMIC_INIT(-1);
 
 	__module_get(THIS_MODULE);
 
@@ -525,7 +525,7 @@ static void serio_init_port(struct serio *serio)
 	mutex_init(&serio->drv_mutex);
 	device_initialize(&serio->dev);
 	dev_set_name(&serio->dev, "serio%lu",
-		     (unsigned long)atomic_inc_return(&serio_no) - 1);
+		     (unsigned long)atomic_inc_return(&serio_no));
 	serio->dev.bus = &serio_bus;
 	serio->dev.release = serio_release_port;
 	serio->dev.groups = serio_device_attr_groups;

drivers/input/serio/serio_raw.c

@@ -292,7 +292,7 @@ static irqreturn_t serio_raw_interrupt(struct serio *serio, unsigned char data,
 
 static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
 {
-	static atomic_t serio_raw_no = ATOMIC_INIT(0);
+	static atomic_t serio_raw_no = ATOMIC_INIT(-1);
 	struct serio_raw *serio_raw;
 	int err;
 
@@ -303,7 +303,7 @@ static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
 	}
 
 	snprintf(serio_raw->name, sizeof(serio_raw->name),
-		 "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no) - 1);
+		 "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no));
 	kref_init(&serio_raw->kref);
 	INIT_LIST_HEAD(&serio_raw->client_list);
 	init_waitqueue_head(&serio_raw->wait);

drivers/input/touchscreen/Kconfig

@@ -295,6 +295,19 @@ config TOUCHSCREEN_FUJITSU
 	  To compile this driver as a module, choose M here: the
 	  module will be called fujitsu-ts.
 
+config TOUCHSCREEN_GOODIX
+	tristate "Goodix I2C touchscreen"
+	depends on I2C && ACPI
+	help
+	  Say Y here if you have the Goodix touchscreen (such as one
+	  installed in Onda v975w tablets) connected to your
+	  system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called goodix.
+
 config TOUCHSCREEN_ILI210X
 	tristate "Ilitek ILI210X based touchscreen"
 	depends on I2C
@@ -334,6 +347,18 @@ config TOUCHSCREEN_GUNZE
 	  To compile this driver as a module, choose M here: the
 	  module will be called gunze.
 
+config TOUCHSCREEN_ELAN
+	tristate "Elan eKTH I2C touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have an Elan eKTH I2C touchscreen
+	  connected to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called elants_i2c.
+
 config TOUCHSCREEN_ELO
 	tristate "Elo serial touchscreens"
 	select SERIO

drivers/input/touchscreen/Makefile

@@ -31,9 +31,11 @@ obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06)	+= edt-ft5x06.o
 obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
 obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
+obj-$(CONFIG_TOUCHSCREEN_ELAN)		+= elants_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
 obj-$(CONFIG_TOUCHSCREEN_EGALAX)	+= egalax_ts.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
+obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
 obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o

drivers/input/touchscreen/ad7877.c

@@ -820,8 +820,7 @@ static int ad7877_remove(struct spi_device *spi)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int ad7877_suspend(struct device *dev)
+static int __maybe_unused ad7877_suspend(struct device *dev)
 {
 	struct ad7877 *ts = dev_get_drvdata(dev);
 
@@ -830,7 +829,7 @@ static int ad7877_suspend(struct device *dev)
 	return 0;
 }
 
-static int ad7877_resume(struct device *dev)
+static int __maybe_unused ad7877_resume(struct device *dev)
 {
 	struct ad7877 *ts = dev_get_drvdata(dev);
 
@@ -838,7 +837,6 @@ static int ad7877_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(ad7877_pm, ad7877_suspend, ad7877_resume);
 

drivers/input/touchscreen/ad7879.c

@@ -284,8 +284,7 @@ static void ad7879_close(struct input_dev* input)
 		__ad7879_disable(ts);
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int ad7879_suspend(struct device *dev)
+static int __maybe_unused ad7879_suspend(struct device *dev)
 {
 	struct ad7879 *ts = dev_get_drvdata(dev);
 
@@ -301,7 +300,7 @@ static int ad7879_suspend(struct device *dev)
 	return 0;
 }
 
-static int ad7879_resume(struct device *dev)
+static int __maybe_unused ad7879_resume(struct device *dev)
 {
 	struct ad7879 *ts = dev_get_drvdata(dev);
 
@@ -316,7 +315,6 @@ static int ad7879_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 SIMPLE_DEV_PM_OPS(ad7879_pm_ops, ad7879_suspend, ad7879_resume);
 EXPORT_SYMBOL(ad7879_pm_ops);

drivers/input/touchscreen/ads7846.c

@@ -883,8 +883,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
 	return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int ads7846_suspend(struct device *dev)
+static int __maybe_unused ads7846_suspend(struct device *dev)
 {
 	struct ads7846 *ts = dev_get_drvdata(dev);
 
@@ -906,7 +905,7 @@ static int ads7846_suspend(struct device *dev)
 	return 0;
 }
 
-static int ads7846_resume(struct device *dev)
+static int __maybe_unused ads7846_resume(struct device *dev)
 {
 	struct ads7846 *ts = dev_get_drvdata(dev);
 
@@ -927,7 +926,6 @@ static int ads7846_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume);
 

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -2244,8 +2244,7 @@ static int mxt_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int mxt_suspend(struct device *dev)
+static int __maybe_unused mxt_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct mxt_data *data = i2c_get_clientdata(client);
@@ -2261,7 +2260,7 @@ static int mxt_suspend(struct device *dev)
 	return 0;
 }
 
-static int mxt_resume(struct device *dev)
+static int __maybe_unused mxt_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct mxt_data *data = i2c_get_clientdata(client);
@@ -2276,7 +2275,6 @@ static int mxt_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
 

drivers/input/touchscreen/auo-pixcir-ts.c

@@ -417,8 +417,7 @@ static void auo_pixcir_input_close(struct input_dev *dev)
 	return;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int auo_pixcir_suspend(struct device *dev)
+static int __maybe_unused auo_pixcir_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
@@ -450,7 +449,7 @@ static int auo_pixcir_suspend(struct device *dev)
 	return ret;
 }
 
-static int auo_pixcir_resume(struct device *dev)
+static int __maybe_unused auo_pixcir_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
@@ -479,7 +478,6 @@ static int auo_pixcir_resume(struct device *dev)
 
 	return ret;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops,
 			 auo_pixcir_suspend, auo_pixcir_resume);

drivers/input/touchscreen/cy8ctmg110_ts.c

@@ -291,8 +291,7 @@ static int cy8ctmg110_probe(struct i2c_client *client,
 	return err;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int cy8ctmg110_suspend(struct device *dev)
+static int __maybe_unused cy8ctmg110_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
@@ -306,7 +305,7 @@ static int cy8ctmg110_suspend(struct device *dev)
 	return 0;
 }
 
-static int cy8ctmg110_resume(struct device *dev)
+static int __maybe_unused cy8ctmg110_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
@@ -319,7 +318,6 @@ static int cy8ctmg110_resume(struct device *dev)
 	}
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(cy8ctmg110_pm, cy8ctmg110_suspend, cy8ctmg110_resume);
 

drivers/input/touchscreen/cyttsp_core.c

@@ -472,8 +472,7 @@ static int cyttsp_disable(struct cyttsp *ts)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int cyttsp_suspend(struct device *dev)
+static int __maybe_unused cyttsp_suspend(struct device *dev)
 {
 	struct cyttsp *ts = dev_get_drvdata(dev);
 	int retval = 0;
@@ -491,7 +490,7 @@ static int cyttsp_suspend(struct device *dev)
 	return retval;
 }
 
-static int cyttsp_resume(struct device *dev)
+static int __maybe_unused cyttsp_resume(struct device *dev)
 {
 	struct cyttsp *ts = dev_get_drvdata(dev);
 
@@ -507,8 +506,6 @@ static int cyttsp_resume(struct device *dev)
 	return 0;
 }
 
-#endif
-
 SIMPLE_DEV_PM_OPS(cyttsp_pm_ops, cyttsp_suspend, cyttsp_resume);
 EXPORT_SYMBOL_GPL(cyttsp_pm_ops);