Merge tag 'for_3.17/samsung-clk' of...

Merge tag 'for_3.17/samsung-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-next-samsung

Samsung clock patches for 3.17

1) non-critical fixes (without need to push to stable):

d5e136a2 clk: samsung: Register clk provider only after registering its all clocks
305cfab0 clk: samsung: Make of_device_id array const
e9d52956 clk: samsung: exynos5420: Setup clocks before system suspend
f65d5189 clk: samsung: trivial: Correct typo in author's name

2) Exynos CLKOUT driver:

800c9797 clk: samsung: exynos4: Add missing CPU/DMC clock hierarchy
01f7ec26 clk: samsung: exynos4: Add CLKOUT clock hierarchy
1e832e51 clk: samsung: Add driver to control CLKOUT line on Exynos SoCs
d19bb397 ARM: dts: exynos: Update PMU node with CLKOUT related data

3) Clock hierarchy extensions:

17d3f1d2 clk: exynos4: Add PPMU IP block source clocks.
ca5b4029 clk: samsung: register exynos5420 apll/kpll configuration data

4) ARM CLKDOWN functionality enablement for Exynos4 and 3250:

42773b28 clk: samsung: exynos4: Enable ARMCLK down feature
45c5b0a6 clk: samsung: exynos3250: Enable ARMCLK down feature

Documentation/devicetree/bindings/arm/samsung/pmu.txt

@@ -12,8 +12,38 @@ Properties:
 
  - reg : offset and length of the register set.
 
+ - #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
+		The single specifier cell is used as index to list of clocks
+		provided by PMU, which is currently:
+			0 : SoC clock output (CLKOUT pin)
+
+ - clock-names : list of clock names for particular CLKOUT mux inputs in
+		following format:
+			"clkoutN", where N is a decimal number corresponding to
+			CLKOUT mux control bits value for given input, e.g.
+				"clkout0", "clkout7", "clkout15".
+
+ - clocks : list of phandles and specifiers to all input clocks listed in
+		clock-names property.
+
 Example :
 pmu_system_controller: system-controller@10040000 {
 	compatible = "samsung,exynos5250-pmu", "syscon";
 	reg = <0x10040000 0x5000>;
+	#clock-cells = <1>;
+	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+			"clkout4", "clkout8", "clkout9";
+	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
+		<&clock CLK_XUSBXTI>;
+};
+
+Example of clock consumer :
+
+usb3503: usb3503@08 {
+	/* ... */
+	clock-names = "refclk";
+	clocks = <&pmu_system_controller 0>;
+	/* ... */
 };

arch/arm/boot/dts/exynos4210.dtsi

@@ -31,6 +31,16 @@ aliases {
 		pinctrl2 = &pinctrl_2;
 	};
 
+	pmu_system_controller: system-controller@10020000 {
+		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+				"clkout4", "clkout8", "clkout9";
+		clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+			<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+			<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
+			<&clock CLK_XUSBXTI>;
+		#clock-cells = <1>;
+	};
+
 	sysram@02020000 {
 		compatible = "mmio-sram";
 		reg = <0x02020000 0x20000>;

arch/arm/boot/dts/exynos4x12.dtsi

@@ -139,6 +139,13 @@ pinctrl_3: pinctrl@106E0000 {
 
 	pmu_system_controller: system-controller@10020000 {
 		compatible = "samsung,exynos4212-pmu", "syscon";
+		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+				"clkout4", "clkout8", "clkout9";
+		clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+			<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+			<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
+			<&clock CLK_XUSBXTI>;
+		#clock-cells = <1>;
 	};
 
 	g2d@10800000 {

arch/arm/boot/dts/exynos5250.dtsi

@@ -191,6 +191,9 @@ pinctrl_3: pinctrl@03860000 {
 	pmu_system_controller: system-controller@10040000 {
 		compatible = "samsung,exynos5250-pmu", "syscon";
 		reg = <0x10040000 0x5000>;
+		clock-names = "clkout16";
+		clocks = <&clock CLK_FIN_PLL>;
+		#clock-cells = <1>;
 	};
 
 	sysreg_system_controller: syscon@10050000 {

arch/arm/boot/dts/exynos5420.dtsi

@@ -724,6 +724,9 @@ gsc_1: video-scaler@13e10000 {
 	pmu_system_controller: system-controller@10040000 {
 		compatible = "samsung,exynos5420-pmu", "syscon";
 		reg = <0x10040000 0x5000>;
+		clock-names = "clkout16";
+		clocks = <&clock CLK_FIN_PLL>;
+		#clock-cells = <1>;
 	};
 
 	sysreg_system_controller: syscon@10050000 {

drivers/clk/samsung/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_SOC_EXYNOS5410)	+= clk-exynos5410.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-clkout.o
 obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
 obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
 obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o

drivers/clk/samsung/clk-exynos-clkout.c

+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Tomasz Figa <t.figa@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Clock driver for Exynos clock output
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#define EXYNOS_CLKOUT_NR_CLKS		1
+#define EXYNOS_CLKOUT_PARENTS		32
+
+#define EXYNOS_PMU_DEBUG_REG		0xa00
+#define EXYNOS_CLKOUT_DISABLE_SHIFT	0
+#define EXYNOS_CLKOUT_MUX_SHIFT		8
+#define EXYNOS4_CLKOUT_MUX_MASK		0xf
+#define EXYNOS5_CLKOUT_MUX_MASK		0x1f
+
+struct exynos_clkout {
+	struct clk_gate gate;
+	struct clk_mux mux;
+	spinlock_t slock;
+	struct clk_onecell_data data;
+	struct clk *clk_table[EXYNOS_CLKOUT_NR_CLKS];
+	void __iomem *reg;
+	u32 pmu_debug_save;
+};
+
+static struct exynos_clkout *clkout;
+
+static int exynos_clkout_suspend(void)
+{
+	clkout->pmu_debug_save = readl(clkout->reg + EXYNOS_PMU_DEBUG_REG);
+
+	return 0;
+}
+
+static void exynos_clkout_resume(void)
+{
+	writel(clkout->pmu_debug_save, clkout->reg + EXYNOS_PMU_DEBUG_REG);
+}
+
+static struct syscore_ops exynos_clkout_syscore_ops = {
+	.suspend = exynos_clkout_suspend,
+	.resume = exynos_clkout_resume,
+};
+
+static void __init exynos_clkout_init(struct device_node *node, u32 mux_mask)
+{
+	const char *parent_names[EXYNOS_CLKOUT_PARENTS];
+	struct clk *parents[EXYNOS_CLKOUT_PARENTS];
+	int parent_count;
+	int ret;
+	int i;
+
+	clkout = kzalloc(sizeof(*clkout), GFP_KERNEL);
+	if (!clkout)
+		return;
+
+	spin_lock_init(&clkout->slock);
+
+	parent_count = 0;
+	for (i = 0; i < EXYNOS_CLKOUT_PARENTS; ++i) {
+		char name[] = "clkoutXX";
+
+		snprintf(name, sizeof(name), "clkout%d", i);
+		parents[i] = of_clk_get_by_name(node, name);
+		if (IS_ERR(parents[i])) {
+			parent_names[i] = "none";
+			continue;
+		}
+
+		parent_names[i] = __clk_get_name(parents[i]);
+		parent_count = i + 1;
+	}
+
+	if (!parent_count)
+		goto free_clkout;
+
+	clkout->reg = of_iomap(node, 0);
+	if (!clkout->reg)
+		goto clks_put;
+
+	clkout->gate.reg = clkout->reg + EXYNOS_PMU_DEBUG_REG;
+	clkout->gate.bit_idx = EXYNOS_CLKOUT_DISABLE_SHIFT;
+	clkout->gate.flags = CLK_GATE_SET_TO_DISABLE;
+	clkout->gate.lock = &clkout->slock;
+
+	clkout->mux.reg = clkout->reg + EXYNOS_PMU_DEBUG_REG;
+	clkout->mux.mask = mux_mask;
+	clkout->mux.shift = EXYNOS_CLKOUT_MUX_SHIFT;
+	clkout->mux.lock = &clkout->slock;
+
+	clkout->clk_table[0] = clk_register_composite(NULL, "clkout",
+				parent_names, parent_count, &clkout->mux.hw,
+				&clk_mux_ops, NULL, NULL, &clkout->gate.hw,
+				&clk_gate_ops, CLK_SET_RATE_PARENT
+				| CLK_SET_RATE_NO_REPARENT);
+	if (IS_ERR(clkout->clk_table[0]))
+		goto err_unmap;
+
+	clkout->data.clks = clkout->clk_table;
+	clkout->data.clk_num = EXYNOS_CLKOUT_NR_CLKS;
+	ret = of_clk_add_provider(node, of_clk_src_onecell_get, &clkout->data);
+	if (ret)
+		goto err_clk_unreg;
+
+	register_syscore_ops(&exynos_clkout_syscore_ops);
+
+	return;
+
+err_clk_unreg:
+	clk_unregister(clkout->clk_table[0]);
+err_unmap:
+	iounmap(clkout->reg);
+clks_put:
+	for (i = 0; i < EXYNOS_CLKOUT_PARENTS; ++i)
+		if (!IS_ERR(parents[i]))
+			clk_put(parents[i]);
+free_clkout:
+	kfree(clkout);
+
+	pr_err("%s: failed to register clkout clock\n", __func__);
+}
+
+static void __init exynos4_clkout_init(struct device_node *node)
+{
+	exynos_clkout_init(node, EXYNOS4_CLKOUT_MUX_MASK);
+}
+CLK_OF_DECLARE(exynos4210_clkout, "samsung,exynos4210-pmu",
+		exynos4_clkout_init);
+CLK_OF_DECLARE(exynos4212_clkout, "samsung,exynos4212-pmu",
+		exynos4_clkout_init);
+CLK_OF_DECLARE(exynos4412_clkout, "samsung,exynos4412-pmu",
+		exynos4_clkout_init);
+
+static void __init exynos5_clkout_init(struct device_node *node)
+{
+	exynos_clkout_init(node, EXYNOS5_CLKOUT_MUX_MASK);
+}
+CLK_OF_DECLARE(exynos5250_clkout, "samsung,exynos5250-pmu",
+		exynos5_clkout_init);
+CLK_OF_DECLARE(exynos5420_clkout, "samsung,exynos5420-pmu",
+		exynos5_clkout_init);

drivers/clk/samsung/clk-exynos3250.c

@@ -87,6 +87,22 @@
 #define SRC_CPU			0x14200
 #define DIV_CPU0		0x14500
 #define DIV_CPU1		0x14504
+#define PWR_CTRL1		0x15020
+#define PWR_CTRL2		0x15024
+
+/* Below definitions are used for PWR_CTRL settings */
+#define PWR_CTRL1_CORE2_DOWN_RATIO(x)		(((x) & 0x7) << 28)
+#define PWR_CTRL1_CORE1_DOWN_RATIO(x)		(((x) & 0x7) << 16)
+#define PWR_CTRL1_DIV2_DOWN_EN			(1 << 9)
+#define PWR_CTRL1_DIV1_DOWN_EN			(1 << 8)
+#define PWR_CTRL1_USE_CORE3_WFE			(1 << 7)
+#define PWR_CTRL1_USE_CORE2_WFE			(1 << 6)
+#define PWR_CTRL1_USE_CORE1_WFE			(1 << 5)
+#define PWR_CTRL1_USE_CORE0_WFE			(1 << 4)
+#define PWR_CTRL1_USE_CORE3_WFI			(1 << 3)
+#define PWR_CTRL1_USE_CORE2_WFI			(1 << 2)
+#define PWR_CTRL1_USE_CORE1_WFI			(1 << 1)
+#define PWR_CTRL1_USE_CORE0_WFI			(1 << 0)
 
 /* list of PLLs to be registered */
 enum exynos3250_plls {
@@ -168,6 +184,8 @@ static unsigned long exynos3250_cmu_clk_regs[] __initdata = {
 	SRC_CPU,
 	DIV_CPU0,
 	DIV_CPU1,
+	PWR_CTRL1,
+	PWR_CTRL2,
 };
 
 static int exynos3250_clk_suspend(void)
@@ -748,6 +766,27 @@ static struct samsung_pll_clock exynos3250_plls[nr_plls] __initdata = {
 			UPLL_LOCK, UPLL_CON0, NULL),
 };
 
+static void __init exynos3_core_down_clock(void)
+{
+	unsigned int tmp;
+
+	/*
+	 * Enable arm clock down (in idle) and set arm divider
+	 * ratios in WFI/WFE state.
+	 */
+	tmp = (PWR_CTRL1_CORE2_DOWN_RATIO(7) | PWR_CTRL1_CORE1_DOWN_RATIO(7) |
+		PWR_CTRL1_DIV2_DOWN_EN | PWR_CTRL1_DIV1_DOWN_EN |
+		PWR_CTRL1_USE_CORE1_WFE | PWR_CTRL1_USE_CORE0_WFE |
+		PWR_CTRL1_USE_CORE1_WFI | PWR_CTRL1_USE_CORE0_WFI);
+	__raw_writel(tmp, reg_base + PWR_CTRL1);
+
+	/*
+	 * Disable the clock up feature on Exynos4x12, in case it was
+	 * enabled by bootloader.
+	 */
+	__raw_writel(0x0, reg_base + PWR_CTRL2);
+}
+
 static void __init exynos3250_cmu_init(struct device_node *np)
 {
 	struct samsung_clk_provider *ctx;
@@ -775,6 +814,10 @@ static void __init exynos3250_cmu_init(struct device_node *np)
 	samsung_clk_register_div(ctx, div_clks, ARRAY_SIZE(div_clks));
 	samsung_clk_register_gate(ctx, gate_clks, ARRAY_SIZE(gate_clks));
 
+	exynos3_core_down_clock();
+
 	exynos3250_clk_sleep_init();
+
+	samsung_clk_of_add_provider(np, ctx);
 }
 CLK_OF_DECLARE(exynos3250_cmu, "samsung,exynos3250-cmu", exynos3250_cmu_init);

drivers/clk/samsung/clk-exynos5250.c

@@ -748,7 +748,7 @@ static struct samsung_pll_clock exynos5250_plls[nr_plls] __initdata = {
 		VPLL_LOCK, VPLL_CON0, NULL),
 };
 
-static struct of_device_id ext_clk_match[] __initdata = {
+static const struct of_device_id ext_clk_match[] __initconst = {
 	{ .compatible = "samsung,clock-xxti", .data = (void *)0, },
 	{ },
 };
@@ -820,6 +820,8 @@ static void __init exynos5250_clk_init(struct device_node *np)
 
 	exynos5250_clk_sleep_init();
 
+	samsung_clk_of_add_provider(np, ctx);
+
 	pr_info("Exynos5250: clock setup completed, armclk=%ld\n",
 			_get_rate("div_arm2"));
 }

drivers/clk/samsung/clk-exynos5260.c

@@ -206,6 +206,8 @@ void __init exynos5260_cmu_register_one(struct device_node *np,
 	if (cmu->clk_regs)
 		exynos5260_clk_sleep_init(reg_base, cmu->clk_regs,
 			cmu->nr_clk_regs);
+
+	samsung_clk_of_add_provider(np, ctx);
 }
 
 

drivers/clk/samsung/clk-exynos5410.c

@@ -204,6 +204,8 @@ static void __init exynos5410_clk_init(struct device_node *np)
 	samsung_clk_register_gate(ctx, exynos5410_gate_clks,
 			ARRAY_SIZE(exynos5410_gate_clks));
 
+	samsung_clk_of_add_provider(np, ctx);
+
 	pr_debug("Exynos5410: clock setup completed.\n");
 }
 CLK_OF_DECLARE(exynos5410_clk, "samsung,exynos5410-clock", exynos5410_clk_init);

drivers/clk/samsung/clk-exynos5420.c

@@ -28,6 +28,7 @@
 #define GATE_BUS_CPU		0x700
 #define GATE_SCLK_CPU		0x800
 #define CLKOUT_CMU_CPU		0xa00
+#define SRC_MASK_CPERI		0x4300
 #define GATE_IP_G2D		0x8800
 #define CPLL_LOCK		0x10020
 #define DPLL_LOCK		0x10030
@@ -70,6 +71,8 @@
 #define SRC_TOP11		0x10284
 #define SRC_TOP12		0x10288
 #define SRC_TOP13		0x1028c /* 5800 specific */
+#define SRC_MASK_TOP0		0x10300
+#define SRC_MASK_TOP1		0x10304
 #define SRC_MASK_TOP2		0x10308
 #define SRC_MASK_TOP7		0x1031c
 #define SRC_MASK_DISP10		0x1032c
@@ -77,6 +80,7 @@
 #define SRC_MASK_FSYS		0x10340
 #define SRC_MASK_PERIC0		0x10350
 #define SRC_MASK_PERIC1		0x10354
+#define SRC_MASK_ISP		0x10370
 #define DIV_TOP0		0x10500
 #define DIV_TOP1		0x10504
 #define DIV_TOP2		0x10508
@@ -98,6 +102,7 @@
 #define DIV2_RATIO0		0x10590
 #define DIV4_RATIO		0x105a0
 #define GATE_BUS_TOP		0x10700
+#define GATE_BUS_DISP1		0x10728
 #define GATE_BUS_GEN		0x1073c
 #define GATE_BUS_FSYS0		0x10740
 #define GATE_BUS_FSYS2		0x10748
@@ -190,6 +195,10 @@ static unsigned long exynos5x_clk_regs[] __initdata = {
 	SRC_MASK_FSYS,
 	SRC_MASK_PERIC0,
 	SRC_MASK_PERIC1,
+	SRC_MASK_TOP0,
+	SRC_MASK_TOP1,
+	SRC_MASK_MAU,
+	SRC_MASK_ISP,
 	SRC_ISP,
 	DIV_TOP0,
 	DIV_TOP1,
@@ -208,6 +217,7 @@ static unsigned long exynos5x_clk_regs[] __initdata = {
 	SCLK_DIV_ISP1,
 	DIV2_RATIO0,
 	DIV4_RATIO,
+	GATE_BUS_DISP1,
 	GATE_BUS_TOP,
 	GATE_BUS_GEN,
 	GATE_BUS_FSYS0,
@@ -249,6 +259,22 @@ static unsigned long exynos5800_clk_regs[] __initdata = {
 	GATE_IP_CAM,
 };
 
+static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = {
+	{ .offset = SRC_MASK_CPERI,		.value = 0xffffffff, },
+	{ .offset = SRC_MASK_TOP0,		.value = 0x11111111, },
+	{ .offset = SRC_MASK_TOP1,		.value = 0x11101111, },
+	{ .offset = SRC_MASK_TOP2,		.value = 0x11111110, },
+	{ .offset = SRC_MASK_TOP7,		.value = 0x00111100, },
+	{ .offset = SRC_MASK_DISP10,		.value = 0x11111110, },
+	{ .offset = SRC_MASK_MAU,		.value = 0x10000000, },
+	{ .offset = SRC_MASK_FSYS,		.value = 0x11111110, },
+	{ .offset = SRC_MASK_PERIC0,		.value = 0x11111110, },
+	{ .offset = SRC_MASK_PERIC1,		.value = 0x11111100, },
+	{ .offset = SRC_MASK_ISP,		.value = 0x11111000, },
+	{ .offset = GATE_BUS_DISP1,		.value = 0xffffffff, },
+	{ .offset = GATE_IP_PERIC,		.value = 0xffffffff, },
+};
+
 static int exynos5420_clk_suspend(void)
 {
 	samsung_clk_save(reg_base, exynos5x_save,
@@ -258,6 +284,9 @@ static int exynos5420_clk_suspend(void)
 		samsung_clk_save(reg_base, exynos5800_save,
 				ARRAY_SIZE(exynos5800_clk_regs));
 
+	samsung_clk_restore(reg_base, exynos5420_set_clksrc,
+				ARRAY_SIZE(exynos5420_set_clksrc));
+
 	return 0;
 }
 
@@ -1167,6 +1196,28 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = {
 	GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9, 0, 0),
 };
 
+static const struct samsung_pll_rate_table exynos5420_pll2550x_24mhz_tbl[] = {
+	PLL_35XX_RATE(2000000000, 250, 3, 0),
+	PLL_35XX_RATE(1900000000, 475, 6, 0),
+	PLL_35XX_RATE(1800000000, 225, 3, 0),
+	PLL_35XX_RATE(1700000000, 425, 6, 0),
+	PLL_35XX_RATE(1600000000, 200, 3, 0),
+	PLL_35XX_RATE(1500000000, 250, 4, 0),
+	PLL_35XX_RATE(1400000000, 175, 3, 0),
+	PLL_35XX_RATE(1300000000, 325, 6, 0),
+	PLL_35XX_RATE(1200000000, 200, 2, 1),
+	PLL_35XX_RATE(1100000000, 275, 3, 1),
+	PLL_35XX_RATE(1000000000, 250, 3, 1),
+	PLL_35XX_RATE(900000000,  150, 2, 1),
+	PLL_35XX_RATE(800000000,  200, 3, 1),
+	PLL_35XX_RATE(700000000,  175, 3, 1),
+	PLL_35XX_RATE(600000000,  200, 2, 2),
+	PLL_35XX_RATE(500000000,  250, 3, 2),
+	PLL_35XX_RATE(400000000,  200, 3, 2),
+	PLL_35XX_RATE(300000000,  200, 2, 3),
+	PLL_35XX_RATE(200000000,  200, 3, 3),
+};
+
 static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = {
 	[apll] = PLL(pll_2550, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
 		APLL_CON0, NULL),
@@ -1192,7 +1243,7 @@ static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = {
 		KPLL_CON0, NULL),
 };
 
-static struct of_device_id ext_clk_match[] __initdata = {
+static const struct of_device_id ext_clk_match[] __initconst = {
 	{ .compatible = "samsung,exynos5420-oscclk", .data = (void *)0, },
 	{ },
 };
@@ -1220,6 +1271,12 @@ static void __init exynos5x_clk_init(struct device_node *np,
 	samsung_clk_of_register_fixed_ext(ctx, exynos5x_fixed_rate_ext_clks,
 			ARRAY_SIZE(exynos5x_fixed_rate_ext_clks),
 			ext_clk_match);
+
+	if (_get_rate("fin_pll") == 24 * MHZ) {
+		exynos5x_plls[apll].rate_table = exynos5420_pll2550x_24mhz_tbl;
+		exynos5x_plls[kpll].rate_table = exynos5420_pll2550x_24mhz_tbl;
+	}
+
 	samsung_clk_register_pll(ctx, exynos5x_plls, ARRAY_SIZE(exynos5x_plls),
 					reg_base);
 	samsung_clk_register_fixed_rate(ctx, exynos5x_fixed_rate_clks,
@@ -1251,6 +1308,8 @@ static void __init exynos5x_clk_init(struct device_node *np,
 	}
 
 	exynos5420_clk_sleep_init();
+
+	samsung_clk_of_add_provider(np, ctx);
 }
 
 static void __init exynos5420_clk_init(struct device_node *np)

drivers/clk/samsung/clk-exynos5440.c

@@ -84,7 +84,7 @@ static struct samsung_gate_clock exynos5440_gate_clks[] __initdata = {
 	GATE(CLK_CS250_O, "cs250_o", "cs250", CLKEN_OV_VAL, 19, 0, 0),
 };
 
-static struct of_device_id ext_clk_match[] __initdata = {
+static const struct of_device_id ext_clk_match[] __initconst = {
 	{ .compatible = "samsung,clock-xtal", .data = (void *)0, },
 	{},
 };
@@ -123,6 +123,8 @@ static void __init exynos5440_clk_init(struct device_node *np)
 	samsung_clk_register_gate(ctx, exynos5440_gate_clks,
 			ARRAY_SIZE(exynos5440_gate_clks));
 
+	samsung_clk_of_add_provider(np, ctx);
+
 	pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("arm_clk"));
 	pr_info("exynos5440 clock initialization complete\n");
 }

drivers/clk/samsung/clk-s3c2410.c

@@ -466,6 +466,8 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
 	}
 
 	s3c2410_clk_sleep_init();
+
+	samsung_clk_of_add_provider(np, ctx);
 }
 
 static void __init s3c2410_clk_init(struct device_node *np)

drivers/clk/samsung/clk-s3c2412.c

@@ -265,6 +265,8 @@ void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
 				   ARRAY_SIZE(s3c2412_aliases));
 
 	s3c2412_clk_sleep_init();
+
+	samsung_clk_of_add_provider(np, ctx);
 }
 
 static void __init s3c2412_clk_init(struct device_node *np)

drivers/clk/samsung/clk-s3c2443.c

@@ -445,6 +445,8 @@ void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
 	}
 
 	s3c2443_clk_sleep_init();
+
+	samsung_clk_of_add_provider(np, ctx);
 }
 
 static void __init s3c2416_clk_init(struct device_node *np)

drivers/clk/samsung/clk-s3c64xx.c

@@ -518,6 +518,8 @@ void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
 					ARRAY_SIZE(s3c64xx_clock_aliases));
 	s3c64xx_clk_sleep_init();
 
+	samsung_clk_of_add_provider(np, ctx);
+
 	pr_info("%s clocks: apll = %lu, mpll = %lu\n"
 		"\tepll = %lu, arm_clk = %lu\n",
 		is_s3c6400 ? "S3C6400" : "S3C6410",

drivers/clk/samsung/clk.c

@@ -53,7 +53,6 @@ struct samsung_clk_provider *__init samsung_clk_init(struct device_node *np,
 {
 	struct samsung_clk_provider *ctx;
 	struct clk **clk_table;
-	int ret;
 	int i;
 
 	ctx = kzalloc(sizeof(struct samsung_clk_provider), GFP_KERNEL);
@@ -72,15 +71,17 @@ struct samsung_clk_provider *__init samsung_clk_init(struct device_node *np,
 	ctx->clk_data.clk_num = nr_clks;
 	spin_lock_init(&ctx->lock);
 
-	if (!np)
 	return ctx;
+}
 
-	ret = of_clk_add_provider(np, of_clk_src_onecell_get,
-			&ctx->clk_data);
-	if (ret)
-		panic("could not register clock provide\n");
-
-	return ctx;
+void __init samsung_clk_of_add_provider(struct device_node *np,
+				struct samsung_clk_provider *ctx)
+{
+	if (np) {
+		if (of_clk_add_provider(np, of_clk_src_onecell_get,
+					&ctx->clk_data))
+			panic("could not register clk provider\n");
+	}
 }
 
 /* add a clock instance to the clock lookup table used for dt based lookup */
@@ -284,7 +285,7 @@ void __init samsung_clk_register_gate(struct samsung_clk_provider *ctx,
 void __init samsung_clk_of_register_fixed_ext(struct samsung_clk_provider *ctx,
 			struct samsung_fixed_rate_clock *fixed_rate_clk,
 			unsigned int nr_fixed_rate_clk,
-			struct of_device_id *clk_matches)
+			const struct of_device_id *clk_matches)
 {
 	const struct of_device_id *match;
 	struct device_node *clk_np;

drivers/clk/samsung/clk.h

@@ -327,11 +327,13 @@ struct samsung_pll_clock {
 extern struct samsung_clk_provider *__init samsung_clk_init(
 			struct device_node *np, void __iomem *base,
 			unsigned long nr_clks);
+extern void __init samsung_clk_of_add_provider(struct device_node *np,
+			struct samsung_clk_provider *ctx);
 extern void __init samsung_clk_of_register_fixed_ext(
 			struct samsung_clk_provider *ctx,
 			struct samsung_fixed_rate_clock *fixed_rate_clk,
 			unsigned int nr_fixed_rate_clk,
-			struct of_device_id *clk_matches);
+			const struct of_device_id *clk_matches);
 
 extern void samsung_clk_add_lookup(struct samsung_clk_provider *ctx,
 			struct clk *clk, unsigned int id);

include/dt-bindings/clock/exynos4.h

 /*
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Andrzej Haja <a.hajda@samsung.com>
+ * Author: Andrzej Hajda <a.hajda@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -34,6 +34,11 @@
 #define CLK_MOUT_CORE		19
 #define CLK_MOUT_APLL		20
 #define CLK_SCLK_HDMIPHY	22
+#define CLK_OUT_DMC		23
+#define CLK_OUT_TOP		24
+#define CLK_OUT_LEFTBUS		25
+#define CLK_OUT_RIGHTBUS	26
+#define CLK_OUT_CPU		27
 
 /* gate for special clocks (sclk) */
 #define CLK_SCLK_FIMC0		128
@@ -230,6 +235,24 @@
 #define CLK_MOUT_G3D		394
 #define CLK_ACLK400_MCUISP	395 /* Exynos4x12 only */
 
+/* gate clocks - ppmu */
+#define CLK_PPMULEFT		400
+#define CLK_PPMURIGHT		401
+#define CLK_PPMUCAMIF		402
+#define CLK_PPMUTV		403
+#define CLK_PPMUMFC_L		404
+#define CLK_PPMUMFC_R		405
+#define CLK_PPMUG3D		406
+#define CLK_PPMUIMAGE		407
+#define CLK_PPMULCD0		408
+#define CLK_PPMULCD1		409 /* Exynos4210 only */
+#define CLK_PPMUFILE		410
+#define CLK_PPMUGPS		411
+#define CLK_PPMUDMC0		412
+#define CLK_PPMUDMC1		413
+#define CLK_PPMUCPU		414
+#define CLK_PPMUACP		415
+
 /* div clocks */
 #define CLK_DIV_ISP0		450 /* Exynos4x12 only */
 #define CLK_DIV_ISP1		451 /* Exynos4x12 only */

include/dt-bindings/clock/exynos5250.h

 /*
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Andrzej Haja <a.hajda@samsung.com>
+ * Author: Andrzej Hajda <a.hajda@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

include/dt-bindings/clock/exynos5420.h

 /*
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Andrzej Haja <a.hajda@samsung.com>
+ * Author: Andrzej Hajda <a.hajda@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

include/dt-bindings/clock/exynos5440.h

 /*
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * Author: Andrzej Haja <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ * Author: Andrzej Hajda <a.hajda@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as