Commit d8a94458 authored by Paul Walmsley's avatar Paul Walmsley Committed by paul

OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*

The OMAP2 clock code currently #includes a large .h file full of static
data structures.  Instead, define the data in a .c file.

Russell King <linux@arm.linux.org.uk> proposed this new arrangement:

    http://marc.info/?l=linux-omap&m=125967425908895&w=2

This patch also deals with most of the flagrant checkpatch violations.

While here, separate the prcm_config data structures out into their own
files, opp2xxx.h and opp24{2,3}0_data.c, and only build in the OPP tables
for the target device.  This should save some memory.  In the long run,
these prcm_config tables should be replaced with OPP code.
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Nishanth Menon <nm@ti.com>
parent 82e9bd58
...@@ -7,7 +7,7 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o ...@@ -7,7 +7,7 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
omap-2-3-common = irq.o sdrc.o omap_hwmod.o omap-2-3-common = irq.o sdrc.o omap_hwmod.o
prcm-common = prcm.o powerdomain.o prcm-common = prcm.o powerdomain.o
clock-common = clock.o clockdomain.o clock-common = clock.o clock_common_data.o clockdomain.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
...@@ -41,8 +41,10 @@ obj-$(CONFIG_ARCH_OMAP3) += cm.o ...@@ -41,8 +41,10 @@ obj-$(CONFIG_ARCH_OMAP3) += cm.o
obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o
# Clock framework # Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o clock2xxx_data.o
obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clock34xx_data.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clock34xx_data.o
obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o
# EMU peripherals # EMU peripherals
obj-$(CONFIG_OMAP3_EMU) += emu.o obj-$(CONFIG_OMAP3_EMU) += emu.o
......
/* /*
* linux/arch/arm/mach-omap2/clock.h * linux/arch/arm/mach-omap2/clock.h
* *
* Copyright (C) 2005-2008 Texas Instruments, Inc. * Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2008 Nokia Corporation * Copyright (C) 2004-2009 Nokia Corporation
* *
* Contacts: * Contacts:
* Richard Woodruff <r-woodruff2@ti.com> * Richard Woodruff <r-woodruff2@ti.com>
...@@ -72,31 +72,17 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, ...@@ -72,31 +72,17 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
u8 *idlest_bit); u8 *idlest_bit);
extern u8 cpu_mask;
extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt; extern const struct clkops clkops_omap2_dflt;
extern u8 cpu_mask;
extern struct clk_functions omap2_clk_functions; extern struct clk_functions omap2_clk_functions;
extern struct clk *vclk, *sclk;
/* clksel_rate data common to 24xx/343x */ extern const struct clksel_rate gpt_32k_rates[];
static const struct clksel_rate gpt_32k_rates[] = { extern const struct clksel_rate gpt_sys_rates[];
{ .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, extern const struct clksel_rate gfx_l3_rates[];
{ .div = 0 }
};
static const struct clksel_rate gpt_sys_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
{ .div = 0 }
};
static const struct clksel_rate gfx_l3_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
{ .div = 0 }
};
#endif #endif
...@@ -37,183 +37,13 @@ ...@@ -37,183 +37,13 @@
#include <plat/sdrc.h> #include <plat/sdrc.h>
#include "clock.h" #include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "prm.h" #include "prm.h"
#include "prm-regbits-24xx.h" #include "prm-regbits-24xx.h"
#include "cm.h" #include "cm.h"
#include "cm-regbits-24xx.h" #include "cm-regbits-24xx.h"
static const struct clkops clkops_oscck;
static const struct clkops clkops_apll96;
static const struct clkops clkops_apll54;
static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
void __iomem **idlest_reg,
u8 *idlest_bit);
/* 2430 I2CHS has non-standard IDLEST register */
static const struct clkops clkops_omap2430_i2chs_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = omap2430_clk_i2chs_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
#include "clock24xx.h"
static struct omap_clk omap24xx_clks[] = {
/* external root sources */
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
/* internal analog sources */
CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X),
CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X),
CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X),
/* internal prcm root sources */
CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X),
CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X),
CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X),
CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X),
CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X),
CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X),
CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X),
CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X),
CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X),
CLK(NULL, "emul_ck", &emul_ck, CK_242X),
/* mpu domain clocks */
CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X),
/* dsp domain clocks */
CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X),
CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
CLK(NULL, "dsp_ick", &dsp_ick, CK_242X),
CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X),
CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X),
CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
/* GFX domain clocks */
CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X),
CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X),
CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X),
/* Modem domain clocks */
CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
/* DSS domain clocks */
CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X),
CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
/* L3 domain clocks */
CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X),
/* L4 domain clocks */
CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X),
CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X),
/* virtual meta-group clock */
CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
/* general l4 interface ck, multi-parent functional clk */
CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X),
CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X),
CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X),
CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X),
CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X),
CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X),
CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X),
CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X),
CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X),
CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X),
CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X),
CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X),
CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X),
CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X),
CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X),
CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X),
CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X),
CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X),
CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X),
CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X),
CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X),
CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X),
CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X),
CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X),
CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X),
CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X),
CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X),
CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X),
CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X),
CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X),
CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X),
CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X),
CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X),
CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X),
CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X),
CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X),
CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X),
CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X),
CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X),
CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X),
CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X),
CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X),
CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X),
CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X),
CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X),
CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X),
CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X),
CLK(NULL, "icr_ick", &icr_ick, CK_243X),
CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X),
CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X),
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X),
CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X),
CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X),
CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X),
CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X),
CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X),
CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X),
CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X),
CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X),
CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X),
CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X),
CLK(NULL, "eac_ick", &eac_ick, CK_242X),
CLK(NULL, "eac_fck", &eac_fck, CK_242X),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X),
CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X),
CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X),
CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X),
CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X),
CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X),
CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X),
CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X),
CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X),
CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X),
CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X),
CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X),
CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X),
CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X),
CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X),
CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X),
CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X),
CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X),
CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
};
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
#define EN_APLL_STOPPED 0 #define EN_APLL_STOPPED 0
...@@ -226,11 +56,12 @@ static struct omap_clk omap24xx_clks[] = { ...@@ -226,11 +56,12 @@ static struct omap_clk omap24xx_clks[] = {
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
static struct prcm_config *curr_prcm_set; const struct prcm_config *curr_prcm_set;
static struct clk *vclk; const struct prcm_config *rate_table;
static struct clk *sclk;
struct clk *vclk, *sclk, *dclk;
static void __iomem *prcm_clksrc_ctrl; void __iomem *prcm_clksrc_ctrl;
/*------------------------------------------------------------------------- /*-------------------------------------------------------------------------
* Omap24xx specific clock functions * Omap24xx specific clock functions
...@@ -255,6 +86,13 @@ static void omap2430_clk_i2chs_find_idlest(struct clk *clk, ...@@ -255,6 +86,13 @@ static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
*idlest_bit = clk->enable_bit; *idlest_bit = clk->enable_bit;
} }
/* 2430 I2CHS has non-standard IDLEST register */
const struct clkops clkops_omap2430_i2chs_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = omap2430_clk_i2chs_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
/** /**
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
...@@ -266,7 +104,7 @@ static void omap2430_clk_i2chs_find_idlest(struct clk *clk, ...@@ -266,7 +104,7 @@ static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
* struct clk *dpll_ck, which is a composite clock of dpll_ck and * struct clk *dpll_ck, which is a composite clock of dpll_ck and
* core_ck. * core_ck.
*/ */
static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
{ {
long long core_clk; long long core_clk;
u32 v; u32 v;
...@@ -304,14 +142,14 @@ static void omap2_disable_osc_ck(struct clk *clk) ...@@ -304,14 +142,14 @@ static void omap2_disable_osc_ck(struct clk *clk)
__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
} }
static const struct clkops clkops_oscck = { const struct clkops clkops_oscck = {
.enable = &omap2_enable_osc_ck, .enable = omap2_enable_osc_ck,
.disable = &omap2_disable_osc_ck, .disable = omap2_disable_osc_ck,
}; };
#ifdef OLD_CK #ifdef OLD_CK
/* Recalculate SYST_CLK */ /* Recalculate SYST_CLK */
static void omap2_sys_clk_recalc(struct clk * clk) static void omap2_sys_clk_recalc(struct clk *clk)
{ {
u32 div = PRCM_CLKSRC_CTRL; u32 div = PRCM_CLKSRC_CTRL;
div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */
...@@ -367,21 +205,21 @@ static void omap2_clk_apll_disable(struct clk *clk) ...@@ -367,21 +205,21 @@ static void omap2_clk_apll_disable(struct clk *clk)
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
} }
static const struct clkops clkops_apll96 = { const struct clkops clkops_apll96 = {
.enable = &omap2_clk_apll96_enable, .enable = omap2_clk_apll96_enable,
.disable = &omap2_clk_apll_disable, .disable = omap2_clk_apll_disable,
}; };
static const struct clkops clkops_apll54 = { const struct clkops clkops_apll54 = {
.enable = &omap2_clk_apll54_enable, .enable = omap2_clk_apll54_enable,
.disable = &omap2_clk_apll_disable, .disable = omap2_clk_apll_disable,
}; };
/* /*
* Uses the current prcm set to tell if a rate is valid. * Uses the current prcm set to tell if a rate is valid.
* You can go slower, but not faster within a given rate set. * You can go slower, but not faster within a given rate set.
*/ */
static long omap2_dpllcore_round_rate(unsigned long target_rate) long omap2_dpllcore_round_rate(unsigned long target_rate)
{ {
u32 high, low, core_clk_src; u32 high, low, core_clk_src;
...@@ -410,19 +248,19 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate) ...@@ -410,19 +248,19 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
} }
static unsigned long omap2_dpllcore_recalc(struct clk *clk) unsigned long omap2_dpllcore_recalc(struct clk *clk)
{ {
return omap2xxx_clk_get_core_rate(clk); return omap2xxx_clk_get_core_rate(clk);
} }
static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
{ {
u32 cur_rate, low, mult, div, valid_rate, done_rate; u32 cur_rate, low, mult, div, valid_rate, done_rate;
u32 bypass = 0; u32 bypass = 0;
struct prcm_config tmpset; struct prcm_config tmpset;
const struct dpll_data *dd; const struct dpll_data *dd;
cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); cur_rate = omap2xxx_clk_get_core_rate(dclk);
mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
mult &= OMAP24XX_CORE_CLK_SRC_MASK; mult &= OMAP24XX_CORE_CLK_SRC_MASK;
...@@ -489,7 +327,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) ...@@ -489,7 +327,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
* *
* Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
*/ */
static unsigned long omap2_table_mpu_recalc(struct clk *clk) unsigned long omap2_table_mpu_recalc(struct clk *clk)
{ {
return curr_prcm_set->mpu_speed; return curr_prcm_set->mpu_speed;
} }
...@@ -501,17 +339,20 @@ static unsigned long omap2_table_mpu_recalc(struct clk *clk) ...@@ -501,17 +339,20 @@ static unsigned long omap2_table_mpu_recalc(struct clk *clk)
* Some might argue L3-DDR, others ARM, others IVA. This code is simple and * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
* just uses the ARM rates. * just uses the ARM rates.
*/ */
static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
{ {
struct prcm_config *ptr; const struct prcm_config *ptr;
long highest_rate; long highest_rate;
long sys_ck_rate;
sys_ck_rate = clk_get_rate(sclk);
highest_rate = -EINVAL; highest_rate = -EINVAL;
for (ptr = rate_table; ptr->mpu_speed; ptr++) { for (ptr = rate_table; ptr->mpu_speed; ptr++) {
if (!(ptr->flags & cpu_mask)) if (!(ptr->flags & cpu_mask))
continue; continue;
if (ptr->xtal_speed != sys_ck.rate) if (ptr->xtal_speed != sys_ck_rate)
continue; continue;
highest_rate = ptr->mpu_speed; highest_rate = ptr->mpu_speed;
...@@ -524,18 +365,21 @@ static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) ...@@ -524,18 +365,21 @@ static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
} }
/* Sets basic clocks based on the specified rate */ /* Sets basic clocks based on the specified rate */
static int omap2_select_table_rate(struct clk *clk, unsigned long rate) int omap2_select_table_rate(struct clk *clk, unsigned long rate)
{ {
u32 cur_rate, done_rate, bypass = 0, tmp; u32 cur_rate, done_rate, bypass = 0, tmp;
struct prcm_config *prcm; const struct prcm_config *prcm;
unsigned long found_speed = 0; unsigned long found_speed = 0;
unsigned long flags; unsigned long flags;
long sys_ck_rate;
sys_ck_rate = clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) { for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask)) if (!(prcm->flags & cpu_mask))
continue; continue;
if (prcm->xtal_speed != sys_ck.rate) if (prcm->xtal_speed != sys_ck_rate)
continue; continue;
if (prcm->mpu_speed <= rate) { if (prcm->mpu_speed <= rate) {
...@@ -551,7 +395,7 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate) ...@@ -551,7 +395,7 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
} }
curr_prcm_set = prcm; curr_prcm_set = prcm;
cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); cur_rate = omap2xxx_clk_get_core_rate(dclk);
if (prcm->dpll_speed == cur_rate / 2) { if (prcm->dpll_speed == cur_rate / 2) {
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
...@@ -682,12 +526,12 @@ static u32 omap2_get_sysclkdiv(void) ...@@ -682,12 +526,12 @@ static u32 omap2_get_sysclkdiv(void)
return div; return div;
} }
static unsigned long omap2_osc_clk_recalc(struct clk *clk) unsigned long omap2_osc_clk_recalc(struct clk *clk)
{ {
return omap2_get_apll_clkin() * omap2_get_sysclkdiv(); return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
} }
static unsigned long omap2_sys_clk_recalc(struct clk *clk) unsigned long omap2_sys_clk_recalc(struct clk *clk)
{ {
return clk->parent->rate / omap2_get_sysclkdiv(); return clk->parent->rate / omap2_get_sysclkdiv();
} }
...@@ -712,85 +556,32 @@ void omap2_clk_prepare_for_reboot(void) ...@@ -712,85 +556,32 @@ void omap2_clk_prepare_for_reboot(void)
*/ */
static int __init omap2_clk_arch_init(void) static int __init omap2_clk_arch_init(void)
{ {
struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck;
unsigned long sys_ck_rate;
if (!mpurate) if (!mpurate)
return -EINVAL; return -EINVAL;
if (clk_set_rate(&virt_prcm_set, mpurate)) virt_prcm_set = clk_get(NULL, "virt_prcm_set");
sys_ck = clk_get(NULL, "sys_ck");
dpll_ck = clk_get(NULL, "dpll_ck");
mpu_ck = clk_get(NULL, "mpu_ck");
if (clk_set_rate(virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n"); printk(KERN_ERR "Could not find matching MPU rate\n");
recalculate_root_clocks(); recalculate_root_clocks();
printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " sys_ck_rate = clk_get_rate(sys_ck);
"%ld.%01ld/%ld/%ld MHz\n",
(sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): "
(dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; "%ld.%01ld/%ld/%ld MHz\n",
(sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10,
(clk_get_rate(dpll_ck) / 1000000),
(clk_get_rate(mpu_ck) / 1000000));
return 0; return 0;
} }
arch_initcall(omap2_clk_arch_init); arch_initcall(omap2_clk_arch_init);
int __init omap2_clk_init(void)
{
struct prcm_config *prcm;
struct omap_clk *c;
u32 clkrate;
u16 cpu_clkflg;
if (cpu_is_omap242x()) {
prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_242X;
cpu_clkflg = CK_242X;
} else if (cpu_is_omap2430()) {
prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_243X;
cpu_clkflg = CK_243X;
}
clk_init(&omap2_clk_functions);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
clk_preinit(c->lk.clk);
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
propagate_rate(&sys_ck);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
if (c->cpu & cpu_clkflg) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
omap2_init_clk_clkdm(c->lk.clk);
}
/* Check the MPU rate set by bootloader */
clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sys_ck.rate)
continue;
if (prcm->dpll_speed <= clkrate)
break;
}
curr_prcm_set = prcm;
recalculate_root_clocks();
printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
(dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
/*
* Only enable those clocks we will need, let the drivers
* enable other clocks as necessary
*/
clk_enable_init_clocks();
/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
vclk = clk_get(NULL, "virt_prcm_set");
sclk = clk_get(NULL, "sys_ck");
return 0;
}
/*
* OMAP2 clock function prototypes and macros
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
*/
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
unsigned long omap2_table_mpu_recalc(struct clk *clk);
int omap2_select_table_rate(struct clk *clk, unsigned long rate);
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
unsigned long omap2_sys_clk_recalc(struct clk *clk);
unsigned long omap2_osc_clk_recalc(struct clk *clk);
unsigned long omap2_sys_clk_recalc(struct clk *clk);
unsigned long omap2_dpllcore_recalc(struct clk *clk);
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
#ifdef CONFIG_ARCH_OMAP2420
#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
#else
#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
#endif
extern void __iomem *prcm_clksrc_ctrl;
extern struct clk *dclk;
extern const struct clkops clkops_omap2430_i2chs_wait;
extern const struct clkops clkops_oscck;
extern const struct clkops clkops_apll96;
extern const struct clkops clkops_apll54;
#endif
/* /*
* linux/arch/arm/mach-omap2/clock24xx.h * linux/arch/arm/mach-omap2/clock2xxx_data.c
* *
* Copyright (C) 2005-2008 Texas Instruments, Inc. * Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2008 Nokia Corporation * Copyright (C) 2004-2009 Nokia Corporation
* *
* Contacts: * Contacts:
* Richard Woodruff <r-woodruff2@ti.com> * Richard Woodruff <r-woodruff2@ti.com>
...@@ -13,600 +13,21 @@ ...@@ -13,600 +13,21 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H #include <linux/module.h>
#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H #include <linux/kernel.h>
#include <linux/clk.h>
#include "clock.h" #include <plat/clkdev_omap.h>
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "prm.h" #include "prm.h"
#include "cm.h" #include "cm.h"
#include "prm-regbits-24xx.h" #include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h" #include "cm-regbits-24xx.h"
#include "sdrc.h" #include "sdrc.h"
/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
#ifdef CONFIG_ARCH_OMAP2420
#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
#else
#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
#endif
static unsigned long omap2_table_mpu_recalc(struct clk *clk);
static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
static unsigned long omap2_sys_clk_recalc(struct clk *clk);
static unsigned long omap2_osc_clk_recalc(struct clk *clk);
static unsigned long omap2_sys_clk_recalc(struct clk *clk);
static unsigned long omap2_dpllcore_recalc(struct clk *clk);
static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
* CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*/
struct prcm_config {
unsigned long xtal_speed; /* crystal rate */
unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */
unsigned long mpu_speed; /* speed of MPU */
unsigned long cm_clksel_mpu; /* mpu divider */
unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */
unsigned long cm_clksel_gfx; /* gfx dividers */
unsigned long cm_clksel1_core; /* major subsystem dividers */
unsigned long cm_clksel1_pll; /* m,n */
unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
unsigned long base_sdrc_rfr; /* base refresh timing for a set */
unsigned char flags;
};
/*
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
* these combinations is via the 'ratio's' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
* setting. All configurations can be described by a DPLL setting and a ratio
* There are 3 ratio sets for the 2430 and X ratio sets for 2420.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*/
/* Core fields for cm_clksel, not ratio governed */
#define RX_CLKSEL_DSS1 (0x10 << 8)
#define RX_CLKSEL_DSS2 (0x0 << 13)
#define RX_CLKSEL_SSI (0x5 << 20)
/*-------------------------------------------------------------------------
* Voltage/DPLL ratios
*-------------------------------------------------------------------------*/
/* 2430 Ratio's, 2430-Ratio Config 1 */
#define R1_CLKSEL_L3 (4 << 0)
#define R1_CLKSEL_L4 (2 << 5)
#define R1_CLKSEL_USB (4 << 25)
#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
R1_CLKSEL_L4 | R1_CLKSEL_L3
#define R1_CLKSEL_MPU (2 << 0)
#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU
#define R1_CLKSEL_DSP (2 << 0)
#define R1_CLKSEL_DSP_IF (2 << 5)
#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
#define R1_CLKSEL_GFX (2 << 0)
#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX
#define R1_CLKSEL_MDM (4 << 0)
#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM
/* 2430-Ratio Config 2 */
#define R2_CLKSEL_L3 (6 << 0)
#define R2_CLKSEL_L4 (2 << 5)
#define R2_CLKSEL_USB (2 << 25)
#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
R2_CLKSEL_L4 | R2_CLKSEL_L3
#define R2_CLKSEL_MPU (2 << 0)
#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU
#define R2_CLKSEL_DSP (2 << 0)
#define R2_CLKSEL_DSP_IF (3 << 5)
#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
#define R2_CLKSEL_GFX (2 << 0)
#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX
#define R2_CLKSEL_MDM (6 << 0)
#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM
/* 2430-Ratio Bootm (BYPASS) */
#define RB_CLKSEL_L3 (1 << 0)
#define RB_CLKSEL_L4 (1 << 5)
#define RB_CLKSEL_USB (1 << 25)
#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
RB_CLKSEL_L4 | RB_CLKSEL_L3
#define RB_CLKSEL_MPU (1 << 0)
#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU
#define RB_CLKSEL_DSP (1 << 0)
#define RB_CLKSEL_DSP_IF (1 << 5)
#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
#define RB_CLKSEL_GFX (1 << 0)
#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX
#define RB_CLKSEL_MDM (1 << 0)
#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM
/* 2420 Ratio Equivalents */
#define RXX_CLKSEL_VLYNQ (0x12 << 15)
#define RXX_CLKSEL_SSI (0x8 << 20)
/* 2420-PRCM III 532MHz core */
#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
RIII_CLKSEL_L3
#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */
#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU
#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */
#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */
#define RIII_SYNC_DSP (1 << 7) /* Enable sync */
#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */
#define RIII_SYNC_IVA (1 << 13) /* Enable sync */
#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
RIII_CLKSEL_DSP
#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */
#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX
/* 2420-PRCM II 600MHz core */
#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */
#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */
#define RII_CLKSEL_USB (2 << 25) /* 50MHz */
#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \
RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
RII_CLKSEL_L4 | RII_CLKSEL_L3
#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */
#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU
#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */
#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \
RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
RII_CLKSEL_DSP
#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
/* 2420-PRCM I 660MHz core */
#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */
#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */
#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */
#define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \
RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
RI_CLKSEL_L4 | RI_CLKSEL_L3
#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */
#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU
#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */
#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */
#define RI_SYNC_DSP (1 << 7) /* Activate sync */
#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */
#define RI_SYNC_IVA (0 << 13) /* Bypass sync */
#define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \
RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
RI_CLKSEL_DSP
#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */
#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX
/* 2420-PRCM VII (boot) */
#define RVII_CLKSEL_L3 (1 << 0)
#define RVII_CLKSEL_L4 (1 << 5)
#define RVII_CLKSEL_DSS1 (1 << 8)
#define RVII_CLKSEL_DSS2 (0 << 13)
#define RVII_CLKSEL_VLYNQ (1 << 15)
#define RVII_CLKSEL_SSI (1 << 20)
#define RVII_CLKSEL_USB (1 << 25)
#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */
#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU
#define RVII_CLKSEL_DSP (1 << 0)
#define RVII_CLKSEL_DSP_IF (1 << 5)
#define RVII_SYNC_DSP (0 << 7)
#define RVII_CLKSEL_IVA (1 << 8)
#define RVII_SYNC_IVA (0 << 13)
#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
#define RVII_CLKSEL_GFX (1 << 0)
#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX
/*-------------------------------------------------------------------------
* 2430 Target modes: Along with each configuration the CPU has several
* modes which goes along with them. Modes mainly are the addition of
* describe DPLL combinations to go along with a ratio.
*-------------------------------------------------------------------------*/
/* Hardware governed */
#define MX_48M_SRC (0 << 3)
#define MX_54M_SRC (0 << 5)
#define MX_APLLS_CLIKIN_12 (3 << 23)
#define MX_APLLS_CLIKIN_13 (2 << 23)
#define MX_APLLS_CLIKIN_19_2 (0 << 23)
/*
* 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
* #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
*/
#define M5A_DPLL_MULT_12 (133 << 12)
#define M5A_DPLL_DIV_12 (5 << 8)
#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
#define M5A_DPLL_MULT_13 (61 << 12)
#define M5A_DPLL_DIV_13 (2 << 8)
#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
#define M5A_DPLL_MULT_19 (55 << 12)
#define M5A_DPLL_DIV_19 (3 << 8)
#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2
/* #5b (ratio1) target DPLL = 200*2 = 400MHz */
#define M5B_DPLL_MULT_12 (50 << 12)
#define M5B_DPLL_DIV_12 (2 << 8)
#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
#define M5B_DPLL_MULT_13 (200 << 12)
#define M5B_DPLL_DIV_13 (12 << 8)
#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
#define M5B_DPLL_MULT_19 (125 << 12)
#define M5B_DPLL_DIV_19 (31 << 8)
#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2
/*
* #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
*/
#define M4_DPLL_MULT_12 (133 << 12)
#define M4_DPLL_DIV_12 (3 << 8)
#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
#define M4_DPLL_MULT_13 (399 << 12)
#define M4_DPLL_DIV_13 (12 << 8)
#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
#define M4_DPLL_MULT_19 (145 << 12)
#define M4_DPLL_DIV_19 (6 << 8)
#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2
/*
* #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
*/
#define M3_DPLL_MULT_12 (55 << 12)
#define M3_DPLL_DIV_12 (1 << 8)
#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
#define M3_DPLL_MULT_13 (76 << 12)
#define M3_DPLL_DIV_13 (2 << 8)
#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
#define M3_DPLL_MULT_19 (17 << 12)
#define M3_DPLL_DIV_19 (0 << 8)
#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2
/*
* #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
*/
#define M2_DPLL_MULT_12 (55 << 12)
#define M2_DPLL_DIV_12 (1 << 8)
#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
* relock time issue */
/* Core frequency changed from 330/165 to 329/164 MHz*/
#define M2_DPLL_MULT_13 (76 << 12)
#define M2_DPLL_DIV_13 (2 << 8)
#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
#define M2_DPLL_MULT_19 (17 << 12)
#define M2_DPLL_DIV_19 (0 << 8)
#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2
/* boot (boot) */
#define MB_DPLL_MULT (1 << 12)
#define MB_DPLL_DIV (0 << 8)
#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
MB_DPLL_MULT | MX_APLLS_CLIKIN_12
#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
MB_DPLL_MULT | MX_APLLS_CLIKIN_13
#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
MB_DPLL_MULT | MX_APLLS_CLIKIN_19
/*
* 2430 - chassis (sedna)
* 165 (ratio1) same as above #2
* 150 (ratio1)
* 133 (ratio2) same as above #4
* 110 (ratio2) same as above #3
* 104 (ratio2)
* boot (boot)
*/
/* PRCM I target DPLL = 2*330MHz = 660MHz */
#define MI_DPLL_MULT_12 (55 << 12)
#define MI_DPLL_DIV_12 (1 << 8)
#define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
/*
* 2420 Equivalent - mode registers
* PRCM II , target DPLL = 2*300MHz = 600MHz
*/
#define MII_DPLL_MULT_12 (50 << 12)
#define MII_DPLL_DIV_12 (1 << 8)
#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
#define MII_DPLL_MULT_13 (300 << 12)
#define MII_DPLL_DIV_13 (12 << 8)
#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
/* PRCM III target DPLL = 2*266 = 532MHz*/
#define MIII_DPLL_MULT_12 (133 << 12)
#define MIII_DPLL_DIV_12 (5 << 8)
#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
#define MIII_DPLL_MULT_13 (266 << 12)
#define MIII_DPLL_DIV_13 (12 << 8)
#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
/* PRCM VII (boot bypass) */
#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL
#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL
/* High and low operation value */
#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
/* MPU speed defines */
#define S12M 12000000
#define S13M 13000000
#define S19M 19200000
#define S26M 26000000
#define S100M 100000000
#define S133M 133000000
#define S150M 150000000
#define S164M 164000000
#define S165M 165000000
#define S199M 199000000
#define S200M 200000000
#define S266M 266000000
#define S300M 300000000
#define S329M 329000000
#define S330M 330000000
#define S399M 399000000
#define S400M 400000000
#define S532M 532000000
#define S600M 600000000
#define S658M 658000000
#define S660M 660000000
#define S798M 798000000
/*-------------------------------------------------------------------------
* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
* Filling in table based on H4 boards and 2430-SDPs variants available.
* There are quite a few more rates combinations which could be defined.
*
* When multiple values are defined the start up will try and choose the
* fastest one. If a 'fast' value is defined, then automatically, the /2
* one should be included as it can be used. Generally having more that
* one fast set does not make sense, as static timings need to be changed
* to change the set. The exception is the bypass setting which is
* availble for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
*-------------------------------------------------------------------------*/
static struct prcm_config rate_table[] = {
/* PRCM I - FAST */
{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
RATE_IN_242X},
/* PRCM II - FAST */
{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
/* PRCM III - FAST */
{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
/* PRCM II - SLOW */
{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
/* PRCM III - SLOW */
{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
/* PRCM-VII (boot-bypass) */
{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
RATE_IN_242X},
/* PRCM-VII (boot-bypass) */
{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
RATE_IN_242X},
/* PRCM #4 - ratio2 (ES2.1) - FAST */
{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #2 - ratio1 (ES2) - FAST */
{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_165MHz,
RATE_IN_243X},
/* PRCM #5a - ratio1 - FAST */
{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #5b - ratio1 - FAST */
{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_100MHz,
RATE_IN_243X},
/* PRCM #4 - ratio1 (ES2.1) - SLOW */
{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #2 - ratio1 (ES2) - SLOW */
{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_165MHz,
RATE_IN_243X},
/* PRCM #5a - ratio1 - SLOW */
{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #5b - ratio1 - SLOW*/
{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_100MHz,
RATE_IN_243X},
/* PRCM-boot/bypass */
{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_BYPASS,
RATE_IN_243X},
/* PRCM-boot/bypass */
{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_BYPASS,
RATE_IN_243X},
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
};
/*------------------------------------------------------------------------- /*-------------------------------------------------------------------------
* 24xx clock tree. * 24xx clock tree.
* *
...@@ -2653,5 +2074,236 @@ static struct clk virt_prcm_set = { ...@@ -2653,5 +2074,236 @@ static struct clk virt_prcm_set = {
.round_rate = &omap2_round_to_table_rate, .round_rate = &omap2_round_to_table_rate,
}; };
#endif
/*
* clkdev integration
*/
static struct omap_clk omap24xx_clks[] = {
/* external root sources */
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
/* internal analog sources */
CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X),
CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X),
CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X),
/* internal prcm root sources */
CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X),
CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X),
CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X),
CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X),
CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X),
CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X),
CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X),
CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X),
CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X),
CLK(NULL, "emul_ck", &emul_ck, CK_242X),
/* mpu domain clocks */
CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X),
/* dsp domain clocks */
CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X),
CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
CLK(NULL, "dsp_ick", &dsp_ick, CK_242X),
CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X),
CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X),
CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
/* GFX domain clocks */
CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X),
CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X),
CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X),
/* Modem domain clocks */
CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
/* DSS domain clocks */
CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X),
CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
/* L3 domain clocks */
CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X),
/* L4 domain clocks */
CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X),
CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X),
/* virtual meta-group clock */
CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
/* general l4 interface ck, multi-parent functional clk */
CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X),
CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X),
CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X),
CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X),
CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X),
CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X),
CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X),
CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X),
CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X),
CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X),
CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X),
CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X),
CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X),
CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X),
CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X),
CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X),
CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X),
CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X),
CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X),
CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X),
CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X),
CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X),
CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X),
CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X),
CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X),
CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X),
CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X),
CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X),
CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X),
CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X),
CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X),
CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X),
CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X),
CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X),
CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X),
CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X),
CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X),
CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X),
CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X),
CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X),
CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X),
CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X),
CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X),
CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X),
CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X),
CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X),
CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X),
CLK(NULL, "icr_ick", &icr_ick, CK_243X),
CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X),
CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X),
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X),
CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X),
CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X),
CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X),
CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X),
CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X),
CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X),
CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X),
CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X),
CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X),
CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X),
CLK(NULL, "eac_ick", &eac_ick, CK_242X),
CLK(NULL, "eac_fck", &eac_fck, CK_242X),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X),
CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X),
CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X),
CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X),
CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X),
CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X),
CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X),
CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X),
CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X),
CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X),
CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X),
CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X),
CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X),
CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X),
CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X),
CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X),
CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X),
CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X),
CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
};
/*
* init code
*/
int __init omap2_clk_init(void)
{
const struct prcm_config *prcm;
struct omap_clk *c;
u32 clkrate;
u16 cpu_clkflg;
if (cpu_is_omap242x()) {
prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_242X;
cpu_clkflg = CK_242X;
rate_table = omap2420_rate_table;
} else if (cpu_is_omap2430()) {
prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_243X;
cpu_clkflg = CK_243X;
rate_table = omap2430_rate_table;
}
clk_init(&omap2_clk_functions);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
clk_preinit(c->lk.clk);
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
propagate_rate(&sys_ck);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
if (c->cpu & cpu_clkflg) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
omap2_init_clk_clkdm(c->lk.clk);
}
/* Check the MPU rate set by bootloader */
clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sys_ck.rate)
continue;
if (prcm->dpll_speed <= clkrate)
break;
}
curr_prcm_set = prcm;
recalculate_root_clocks();
printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
(dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
/*
* Only enable those clocks we will need, let the drivers
* enable other clocks as necessary
*/
clk_enable_init_clocks();
/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
vclk = clk_get(NULL, "virt_prcm_set");
sclk = clk_get(NULL, "sys_ck");
dclk = clk_get(NULL, "dpll_ck");
return 0;
}
/*
* opp2420_data.c - old-style "OPP" table for OMAP2420
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
*
* Richard Woodruff <r-woodruff2@ti.com>
*
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
* these combinations is via the 'ratio's' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
* setting. All configurations can be described by a DPLL setting and a ratio
* There are 3 ratio sets for the 2430 and X ratio sets for 2420.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*
* XXX Missing voltage data.
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
*
* This is technically part of the OMAP2xxx clock code.
*/
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
/*-------------------------------------------------------------------------
* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
* Filling in table based on H4 boards and 2430-SDPs variants available.
* There are quite a few more rates combinations which could be defined.
*
* When multiple values are defined the start up will try and choose the
* fastest one. If a 'fast' value is defined, then automatically, the /2
* one should be included as it can be used. Generally having more that
* one fast set does not make sense, as static timings need to be changed
* to change the set. The exception is the bypass setting which is
* availble for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
*-------------------------------------------------------------------------*/
const struct prcm_config omap2420_rate_table[] = {
/* PRCM I - FAST */
{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
RATE_IN_242X},
/* PRCM II - FAST */
{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
/* PRCM III - FAST */
{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
/* PRCM II - SLOW */
{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
/* PRCM III - SLOW */
{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
/* PRCM-VII (boot-bypass) */
{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
RATE_IN_242X},
/* PRCM-VII (boot-bypass) */
{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
RATE_IN_242X},
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
};
/*
* opp2420_data.c - old-style "OPP" table for OMAP2420
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
*
* Richard Woodruff <r-woodruff2@ti.com>
*
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
* these combinations is via the 'ratio's' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
* setting. All configurations can be described by a DPLL setting and a ratio
* There are 3 ratio sets for the 2430 and X ratio sets for 2420.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*
* XXX Missing voltage data.
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
*
* This is technically part of the OMAP2xxx clock code.
*/
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
/*-------------------------------------------------------------------------
* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
* Filling in table based on H4 boards and 2430-SDPs variants available.
* There are quite a few more rates combinations which could be defined.
*
* When multiple values are defined the start up will try and choose the
* fastest one. If a 'fast' value is defined, then automatically, the /2
* one should be included as it can be used. Generally having more that
* one fast set does not make sense, as static timings need to be changed
* to change the set. The exception is the bypass setting which is
* availble for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
*-------------------------------------------------------------------------*/
const struct prcm_config omap2430_rate_table[] = {
/* PRCM #4 - ratio2 (ES2.1) - FAST */
{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #2 - ratio1 (ES2) - FAST */
{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_165MHz,
RATE_IN_243X},
/* PRCM #5a - ratio1 - FAST */
{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #5b - ratio1 - FAST */
{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_100MHz,
RATE_IN_243X},
/* PRCM #4 - ratio1 (ES2.1) - SLOW */
{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #2 - ratio1 (ES2) - SLOW */
{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_165MHz,
RATE_IN_243X},
/* PRCM #5a - ratio1 - SLOW */
{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #5b - ratio1 - SLOW*/
{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_100MHz,
RATE_IN_243X},
/* PRCM-boot/bypass */
{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_BYPASS,
RATE_IN_243X},
/* PRCM-boot/bypass */
{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_BYPASS,
RATE_IN_243X},
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
};
/*
* opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
*
* Richard Woodruff <r-woodruff2@ti.com>
*
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
* these combinations is via the 'ratio's' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
* setting. All configurations can be described by a DPLL setting and a ratio
* There are 3 ratio sets for the 2430 and X ratio sets for 2420.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*
* XXX Missing voltage data.
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
*
* This is technically part of the OMAP2xxx clock code.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
/**
* struct prcm_config - define clock rates on a per-OPP basis (24xx)
*
* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
* CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
* This is deprecated. As soon as we have a decent OPP API, we should
* move all this stuff to it.
*/
struct prcm_config {
unsigned long xtal_speed; /* crystal rate */
unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */
unsigned long mpu_speed; /* speed of MPU */
unsigned long cm_clksel_mpu; /* mpu divider */
unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */
unsigned long cm_clksel_gfx; /* gfx dividers */
unsigned long cm_clksel1_core; /* major subsystem dividers */
unsigned long cm_clksel1_pll; /* m,n */
unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
unsigned long base_sdrc_rfr; /* base refresh timing for a set */
unsigned char flags;
};
/* Core fields for cm_clksel, not ratio governed */
#define RX_CLKSEL_DSS1 (0x10 << 8)
#define RX_CLKSEL_DSS2 (0x0 << 13)
#define RX_CLKSEL_SSI (0x5 << 20)
/*-------------------------------------------------------------------------
* Voltage/DPLL ratios
*-------------------------------------------------------------------------*/
/* 2430 Ratio's, 2430-Ratio Config 1 */
#define R1_CLKSEL_L3 (4 << 0)
#define R1_CLKSEL_L4 (2 << 5)
#define R1_CLKSEL_USB (4 << 25)
#define R1_CM_CLKSEL1_CORE_VAL (R1_CLKSEL_USB | RX_CLKSEL_SSI | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
R1_CLKSEL_L4 | R1_CLKSEL_L3)
#define R1_CLKSEL_MPU (2 << 0)
#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU
#define R1_CLKSEL_DSP (2 << 0)
#define R1_CLKSEL_DSP_IF (2 << 5)
#define R1_CM_CLKSEL_DSP_VAL (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF)
#define R1_CLKSEL_GFX (2 << 0)
#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX
#define R1_CLKSEL_MDM (4 << 0)
#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM
/* 2430-Ratio Config 2 */
#define R2_CLKSEL_L3 (6 << 0)
#define R2_CLKSEL_L4 (2 << 5)
#define R2_CLKSEL_USB (2 << 25)
#define R2_CM_CLKSEL1_CORE_VAL (R2_CLKSEL_USB | RX_CLKSEL_SSI | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
R2_CLKSEL_L4 | R2_CLKSEL_L3)
#define R2_CLKSEL_MPU (2 << 0)
#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU
#define R2_CLKSEL_DSP (2 << 0)
#define R2_CLKSEL_DSP_IF (3 << 5)
#define R2_CM_CLKSEL_DSP_VAL (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF)
#define R2_CLKSEL_GFX (2 << 0)
#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX
#define R2_CLKSEL_MDM (6 << 0)
#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM
/* 2430-Ratio Bootm (BYPASS) */
#define RB_CLKSEL_L3 (1 << 0)
#define RB_CLKSEL_L4 (1 << 5)
#define RB_CLKSEL_USB (1 << 25)
#define RB_CM_CLKSEL1_CORE_VAL (RB_CLKSEL_USB | RX_CLKSEL_SSI | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
RB_CLKSEL_L4 | RB_CLKSEL_L3)
#define RB_CLKSEL_MPU (1 << 0)
#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU
#define RB_CLKSEL_DSP (1 << 0)
#define RB_CLKSEL_DSP_IF (1 << 5)
#define RB_CM_CLKSEL_DSP_VAL (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF)
#define RB_CLKSEL_GFX (1 << 0)
#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX
#define RB_CLKSEL_MDM (1 << 0)
#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM
/* 2420 Ratio Equivalents */
#define RXX_CLKSEL_VLYNQ (0x12 << 15)
#define RXX_CLKSEL_SSI (0x8 << 20)
/* 2420-PRCM III 532MHz core */
#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
#define RIII_CM_CLKSEL1_CORE_VAL (RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
RIII_CLKSEL_L3)
#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */
#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU
#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */
#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */
#define RIII_SYNC_DSP (1 << 7) /* Enable sync */
#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */
#define RIII_SYNC_IVA (1 << 13) /* Enable sync */
#define RIII_CM_CLKSEL_DSP_VAL (RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
RIII_CLKSEL_DSP)
#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */
#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX
/* 2420-PRCM II 600MHz core */
#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */
#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */
#define RII_CLKSEL_USB (2 << 25) /* 50MHz */
#define RII_CM_CLKSEL1_CORE_VAL (RII_CLKSEL_USB | RXX_CLKSEL_SSI | \
RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \
RII_CLKSEL_L3)
#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */
#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU
#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */
#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
#define RII_CM_CLKSEL_DSP_VAL (RII_SYNC_IVA | RII_CLKSEL_IVA | \
RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
RII_CLKSEL_DSP)
#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
/* 2420-PRCM I 660MHz core */
#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */
#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */
#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */
#define RI_CM_CLKSEL1_CORE_VAL (RI_CLKSEL_USB | \
RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
RI_CLKSEL_L4 | RI_CLKSEL_L3)
#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */
#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU
#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */
#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */
#define RI_SYNC_DSP (1 << 7) /* Activate sync */
#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */
#define RI_SYNC_IVA (0 << 13) /* Bypass sync */
#define RI_CM_CLKSEL_DSP_VAL (RI_SYNC_IVA | RI_CLKSEL_IVA | \
RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
RI_CLKSEL_DSP)
#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */
#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX
/* 2420-PRCM VII (boot) */
#define RVII_CLKSEL_L3 (1 << 0)
#define RVII_CLKSEL_L4 (1 << 5)
#define RVII_CLKSEL_DSS1 (1 << 8)
#define RVII_CLKSEL_DSS2 (0 << 13)
#define RVII_CLKSEL_VLYNQ (1 << 15)
#define RVII_CLKSEL_SSI (1 << 20)
#define RVII_CLKSEL_USB (1 << 25)
#define RVII_CM_CLKSEL1_CORE_VAL (RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
RVII_CLKSEL_VLYNQ | \
RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \
RVII_CLKSEL_L4 | RVII_CLKSEL_L3)
#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */
#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU
#define RVII_CLKSEL_DSP (1 << 0)
#define RVII_CLKSEL_DSP_IF (1 << 5)
#define RVII_SYNC_DSP (0 << 7)
#define RVII_CLKSEL_IVA (1 << 8)
#define RVII_SYNC_IVA (0 << 13)
#define RVII_CM_CLKSEL_DSP_VAL (RVII_SYNC_IVA | RVII_CLKSEL_IVA | \
RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \
RVII_CLKSEL_DSP)
#define RVII_CLKSEL_GFX (1 << 0)
#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX
/*-------------------------------------------------------------------------
* 2430 Target modes: Along with each configuration the CPU has several
* modes which goes along with them. Modes mainly are the addition of
* describe DPLL combinations to go along with a ratio.
*-------------------------------------------------------------------------*/
/* Hardware governed */
#define MX_48M_SRC (0 << 3)
#define MX_54M_SRC (0 << 5)
#define MX_APLLS_CLIKIN_12 (3 << 23)
#define MX_APLLS_CLIKIN_13 (2 << 23)
#define MX_APLLS_CLIKIN_19_2 (0 << 23)
/*
* 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
* #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
*/
#define M5A_DPLL_MULT_12 (133 << 12)
#define M5A_DPLL_DIV_12 (5 << 8)
#define M5A_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12)
#define M5A_DPLL_MULT_13 (61 << 12)
#define M5A_DPLL_DIV_13 (2 << 8)
#define M5A_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13)
#define M5A_DPLL_MULT_19 (55 << 12)
#define M5A_DPLL_DIV_19 (3 << 8)
#define M5A_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2)
/* #5b (ratio1) target DPLL = 200*2 = 400MHz */
#define M5B_DPLL_MULT_12 (50 << 12)
#define M5B_DPLL_DIV_12 (2 << 8)
#define M5B_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12)
#define M5B_DPLL_MULT_13 (200 << 12)
#define M5B_DPLL_DIV_13 (12 << 8)
#define M5B_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13)
#define M5B_DPLL_MULT_19 (125 << 12)
#define M5B_DPLL_DIV_19 (31 << 8)
#define M5B_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2)
/*
* #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
*/
#define M4_DPLL_MULT_12 (133 << 12)
#define M4_DPLL_DIV_12 (3 << 8)
#define M4_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12)
#define M4_DPLL_MULT_13 (399 << 12)
#define M4_DPLL_DIV_13 (12 << 8)
#define M4_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13)
#define M4_DPLL_MULT_19 (145 << 12)
#define M4_DPLL_DIV_19 (6 << 8)
#define M4_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2)
/*
* #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
*/
#define M3_DPLL_MULT_12 (55 << 12)
#define M3_DPLL_DIV_12 (1 << 8)
#define M3_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12)
#define M3_DPLL_MULT_13 (76 << 12)
#define M3_DPLL_DIV_13 (2 << 8)
#define M3_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13)
#define M3_DPLL_MULT_19 (17 << 12)
#define M3_DPLL_DIV_19 (0 << 8)
#define M3_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2)
/*
* #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
*/
#define M2_DPLL_MULT_12 (55 << 12)
#define M2_DPLL_DIV_12 (1 << 8)
#define M2_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12)
/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
* relock time issue */
/* Core frequency changed from 330/165 to 329/164 MHz*/
#define M2_DPLL_MULT_13 (76 << 12)
#define M2_DPLL_DIV_13 (2 << 8)
#define M2_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13)
#define M2_DPLL_MULT_19 (17 << 12)
#define M2_DPLL_DIV_19 (0 << 8)
#define M2_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2)
/* boot (boot) */
#define MB_DPLL_MULT (1 << 12)
#define MB_DPLL_DIV (0 << 8)
#define MB_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
MB_DPLL_DIV | MB_DPLL_MULT | \
MX_APLLS_CLIKIN_12)
#define MB_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
MB_DPLL_DIV | MB_DPLL_MULT | \
MX_APLLS_CLIKIN_13)
#define MB_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \
MB_DPLL_DIV | MB_DPLL_MULT | \
MX_APLLS_CLIKIN_19)
/*
* 2430 - chassis (sedna)
* 165 (ratio1) same as above #2
* 150 (ratio1)
* 133 (ratio2) same as above #4
* 110 (ratio2) same as above #3
* 104 (ratio2)
* boot (boot)
*/
/* PRCM I target DPLL = 2*330MHz = 660MHz */
#define MI_DPLL_MULT_12 (55 << 12)
#define MI_DPLL_DIV_12 (1 << 8)
#define MI_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12)
/*
* 2420 Equivalent - mode registers
* PRCM II , target DPLL = 2*300MHz = 600MHz
*/
#define MII_DPLL_MULT_12 (50 << 12)
#define MII_DPLL_DIV_12 (1 << 8)
#define MII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12)
#define MII_DPLL_MULT_13 (300 << 12)
#define MII_DPLL_DIV_13 (12 << 8)
#define MII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13)
/* PRCM III target DPLL = 2*266 = 532MHz*/
#define MIII_DPLL_MULT_12 (133 << 12)
#define MIII_DPLL_DIV_12 (5 << 8)
#define MIII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \
MIII_DPLL_DIV_12 | \
MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12)
#define MIII_DPLL_MULT_13 (266 << 12)
#define MIII_DPLL_DIV_13 (12 << 8)
#define MIII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \
MIII_DPLL_DIV_13 | \
MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13)
/* PRCM VII (boot bypass) */
#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL
#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL
/* High and low operation value */
#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
/* MPU speed defines */
#define S12M 12000000
#define S13M 13000000
#define S19M 19200000
#define S26M 26000000
#define S100M 100000000
#define S133M 133000000
#define S150M 150000000
#define S164M 164000000
#define S165M 165000000
#define S199M 199000000
#define S200M 200000000
#define S266M 266000000
#define S300M 300000000
#define S329M 329000000
#define S330M 330000000
#define S399M 399000000
#define S400M 400000000
#define S532M 532000000
#define S600M 600000000
#define S658M 658000000
#define S660M 660000000
#define S798M 798000000
extern const struct prcm_config omap2420_rate_table[];
extern const struct prcm_config omap2430_rate_table[];
extern const struct prcm_config *rate_table;
extern const struct prcm_config *curr_prcm_set;
#endif
...@@ -18,6 +18,9 @@ ...@@ -18,6 +18,9 @@
#include <plat/sdrc.h> #include <plat/sdrc.h>
#ifndef __ASSEMBLER__ #ifndef __ASSEMBLER__
#include <linux/io.h>
extern void __iomem *omap2_sdrc_base; extern void __iomem *omap2_sdrc_base;
extern void __iomem *omap2_sms_base; extern void __iomem *omap2_sms_base;
......
...@@ -13,6 +13,8 @@ ...@@ -13,6 +13,8 @@
#ifndef __ARCH_ARM_OMAP_CLOCK_H #ifndef __ARCH_ARM_OMAP_CLOCK_H
#define __ARCH_ARM_OMAP_CLOCK_H #define __ARCH_ARM_OMAP_CLOCK_H
#include <linux/list.h>
struct module; struct module;
struct clk; struct clk;
struct clockdomain; struct clockdomain;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment