Commit d8b6f5ba authored by Ansuel Smith's avatar Ansuel Smith Committed by David S. Miller

dsa: qca8k: add mac_power_sel support

Add missing mac power sel support needed for ipq8064/5 SoC that require
1.8v for the internal regulator port instead of the default 1.5v.
If other device needs this, consider adding a dedicated binding to
support this.
Signed-off-by: default avatarAnsuel Smith <ansuelsmth@gmail.com>
Reviewed-by: default avatarVladimir Oltean <olteanv@gmail.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent bacc8daf
......@@ -950,6 +950,33 @@ qca8k_setup_of_rgmii_delay(struct qca8k_priv *priv)
return 0;
}
static int
qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
{
u32 mask = 0;
int ret = 0;
/* SoC specific settings for ipq8064.
* If more device require this consider adding
* a dedicated binding.
*/
if (of_machine_is_compatible("qcom,ipq8064"))
mask |= QCA8K_MAC_PWR_RGMII0_1_8V;
/* SoC specific settings for ipq8065 */
if (of_machine_is_compatible("qcom,ipq8065"))
mask |= QCA8K_MAC_PWR_RGMII1_1_8V;
if (mask) {
ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL,
QCA8K_MAC_PWR_RGMII0_1_8V |
QCA8K_MAC_PWR_RGMII1_1_8V,
mask);
}
return ret;
}
static int
qca8k_setup(struct dsa_switch *ds)
{
......@@ -979,6 +1006,10 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
return ret;
ret = qca8k_setup_mac_pwr_sel(priv);
if (ret)
return ret;
/* Enable CPU Port */
ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
......
......@@ -100,6 +100,11 @@
#define QCA8K_SGMII_MODE_CTRL_PHY (1 << 22)
#define QCA8K_SGMII_MODE_CTRL_MAC (2 << 22)
/* MAC_PWR_SEL registers */
#define QCA8K_REG_MAC_PWR_SEL 0x0e4
#define QCA8K_MAC_PWR_RGMII1_1_8V BIT(18)
#define QCA8K_MAC_PWR_RGMII0_1_8V BIT(19)
/* EEE control registers */
#define QCA8K_REG_EEE_CTRL 0x100
#define QCA8K_REG_EEE_CTRL_LPI_EN(_i) ((_i + 1) * 2)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment