staging: iio: generic_buffer cleanup

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/iio/Documentation/generic_buffer.c

@@ -33,8 +33,8 @@
 
 /**
  * size_from_channelarray() - calculate the storage size of a scan
- * @channels: the channel info array
- * @num_channels: size of the channel info array
+ * @channels:		the channel info array
+ * @num_channels:	number of channels
  *
  * Has the side effect of filling the channels[i].location values used
  * in processing the buffer output.
@@ -58,14 +58,15 @@ int size_from_channelarray(struct iio_channel_info *channels, int num_channels)
 void print2byte(int input, struct iio_channel_info *info)
 {
 	/* First swap if incorrect endian */
-
 	if (info->be)
 		input = be16toh((uint16_t)input);
 	else
 		input = le16toh((uint16_t)input);
 
-	/* shift before conversion to avoid sign extension
-	   of left aligned data */
+	/*
+	 * Shift before conversion to avoid sign extension
+	 * of left aligned data
+	 */
 	input = input >> info->shift;
 	if (info->is_signed) {
 		int16_t val = input;
@@ -82,39 +83,39 @@ void print2byte(int input, struct iio_channel_info *info)
 /**
  * process_scan() - print out the values in SI units
  * @data:		pointer to the start of the scan
- * @infoarray:		information about the channels. Note
+ * @channels:		information about the channels. Note
  *  size_from_channelarray must have been called first to fill the
  *  location offsets.
- * @num_channels:	the number of active channels
+ * @num_channels:	number of channels
  **/
 void process_scan(char *data,
-		  struct iio_channel_info *infoarray,
+		  struct iio_channel_info *channels,
 		  int num_channels)
 {
 	int k;
 	for (k = 0; k < num_channels; k++)
-		switch (infoarray[k].bytes) {
+		switch (channels[k].bytes) {
 			/* only a few cases implemented so far */
 		case 2:
-			print2byte(*(uint16_t *)(data + infoarray[k].location),
-				   &infoarray[k]);
+			print2byte(*(uint16_t *)(data + channels[k].location),
+				   &channels[k]);
 			break;
 		case 8:
-			if (infoarray[k].is_signed) {
+			if (channels[k].is_signed) {
 				int64_t val = *(int64_t *)
 					(data +
-					 infoarray[k].location);
-				if ((val >> infoarray[k].bits_used) & 1)
-					val = (val & infoarray[k].mask) |
-						~infoarray[k].mask;
+					 channels[k].location);
+				if ((val >> channels[k].bits_used) & 1)
+					val = (val & channels[k].mask) |
+						~channels[k].mask;
 				/* special case for timestamp */
-				if (infoarray[k].scale == 1.0f &&
-				    infoarray[k].offset == 0.0f)
+				if (channels[k].scale == 1.0f &&
+				    channels[k].offset == 0.0f)
 					printf(" %lld", val);
 				else
 					printf("%05f ", ((float)val +
-							 infoarray[k].offset)*
-					       infoarray[k].scale);
+							 channels[k].offset)*
+					       channels[k].scale);
 			}
 			break;
 		default:
@@ -129,7 +130,6 @@ int main(int argc, char **argv)
 	unsigned long timedelay = 1000000;
 	unsigned long buf_len = 128;
 
-
 	int ret, c, i, j, toread;
 	int fp;
 
@@ -146,7 +146,7 @@ int main(int argc, char **argv)
 	int noevents = 0;
 	char *dummy;
 
-	struct iio_channel_info *infoarray;
+	struct iio_channel_info *channels;
 
 	while ((c = getopt(argc, argv, "l:w:c:et:n:")) != -1) {
 		switch (c) {
@@ -189,7 +189,7 @@ int main(int argc, char **argv)
 	asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num);
 	if (trigger_name == NULL) {
 		/*
-		 * Build the trigger name. If it is device associated it's
+		 * Build the trigger name. If it is device associated its
 		 * name is <device_name>_dev[n] where n matches the device
 		 * number found above
 		 */
@@ -214,7 +214,7 @@ int main(int argc, char **argv)
 	 * Parse the files in scan_elements to identify what channels are
 	 * present
 	 */
-	ret = build_channel_array(dev_dir_name, &infoarray, &num_channels);
+	ret = build_channel_array(dev_dir_name, &channels, &num_channels);
 	if (ret) {
 		printf("Problem reading scan element information\n");
 		printf("diag %s\n", dev_dir_name);
@@ -233,7 +233,7 @@ int main(int argc, char **argv)
 		goto error_free_triggername;
 	}
 	printf("%s %s\n", dev_dir_name, trigger_name);
-	/* Set the device trigger to be the data rdy trigger found above */
+	/* Set the device trigger to be the data ready trigger found above */
 	ret = write_sysfs_string_and_verify("trigger/current_trigger",
 					dev_dir_name,
 					trigger_name);
@@ -251,7 +251,7 @@ int main(int argc, char **argv)
 	ret = write_sysfs_int("enable", buf_dir_name, 1);
 	if (ret < 0)
 		goto error_free_buf_dir_name;
-	scan_size = size_from_channelarray(infoarray, num_channels);
+	scan_size = size_from_channelarray(channels, num_channels);
 	data = malloc(scan_size*buf_len);
 	if (!data) {
 		ret = -ENOMEM;
@@ -266,7 +266,7 @@ int main(int argc, char **argv)
 
 	/* Attempt to open non blocking the access dev */
 	fp = open(buffer_access, O_RDONLY | O_NONBLOCK);
-	if (fp == -1) { /*If it isn't there make the node */
+	if (fp == -1) { /* If it isn't there make the node */
 		printf("Failed to open %s\n", buffer_access);
 		ret = -errno;
 		goto error_free_buffer_access;
@@ -297,16 +297,16 @@ int main(int argc, char **argv)
 		}
 		for (i = 0; i < read_size/scan_size; i++)
 			process_scan(data + scan_size*i,
-				     infoarray,
+				     channels,
 				     num_channels);
 	}
 
-	/* Stop the ring buffer */
+	/* Stop the buffer */
 	ret = write_sysfs_int("enable", buf_dir_name, 0);
 	if (ret < 0)
 		goto error_close_buffer_access;
 
-	/* Disconnect from the trigger - just write a dummy name.*/
+	/* Disconnect the trigger - just write a dummy name. */
 	write_sysfs_string("trigger/current_trigger",
 			dev_dir_name, "NULL");