Merge series "Add Renesas RPC-IF support" from Sergei Shtylyov...

Merge series "Add Renesas RPC-IF support" from Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>:

Hello!

Here's a set of 2 patches against Linus' repo. Renesas Reduced Pin Count
Interface (RPC-IF) allows a SPI flash or HyperFlash connected to the SoC
to be accessed via the external address space read mode or the manual mode.
The memory controller driver for RPC-IF registers either SPI or HyperFLash
subdevice, depending on the contents of the device tree subnode; it also
provides the abstract "back end" API that can be used by the "front end"
SPI/MTD drivers to talk to the real hardware...

Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>.

[1/2] dt-bindings: memory: document Renesas RPC-IF bindings
[2/2] memory: add Renesas RPC-IF driver

MBR, Sergei

Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Reduced Pin Count Interface (RPC-IF)
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+description: |
+  Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
+  be accessed via the external address space read mode or the manual mode.
+
+  The flash chip itself should be represented by a subnode of the RPC-IF node.
+  The flash interface is selected based on the "compatible" property of this
+  subnode:
+  - if it contains "jedec,spi-nor", then SPI is used;
+  - if it contains "cfi-flash", then HyperFlash is used.
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - renesas,r8a77970-rpc-if       # R-Car V3M
+        - renesas,r8a77980-rpc-if       # R-Car V3H
+        - renesas,r8a77995-rpc-if       # R-Car D3
+      - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
+
+  reg:
+    items:
+      - description: RPC-IF registers
+      - description: direct mapping read mode area
+      - description: write buffer area
+
+  reg-names:
+    items:
+      - const: regs
+      - const: dirmap
+      - const: wbuf
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "flash@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - cfi-flash
+          - jedec,spi-nor
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a77995-sysc.h>
+
+    spi@ee200000 {
+      compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
+      reg = <0xee200000 0x200>,
+            <0x08000000 0x4000000>,
+            <0xee208000 0x100>;
+      reg-names = "regs", "dirmap", "wbuf";
+      clocks = <&cpg CPG_MOD 917>;
+      power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+      resets = <&cpg 917>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+        spi-max-frequency = <40000000>;
+        spi-tx-bus-width = <1>;
+        spi-rx-bus-width = <1>;
+      };
+    };

drivers/memory/Kconfig

@@ -174,6 +174,15 @@ config PL353_SMC
 	  This driver is for the ARM PL351/PL353 Static Memory
 	  Controller(SMC) module.
 
+config RENESAS_RPCIF
+	tristate "Renesas RPC-IF driver"
+	depends on ARCH_RENESAS
+	select REGMAP_MMIO
+	help
+	  This supports Renesas R-Car Gen3 RPC-IF which provides either SPI
+	  host or HyperFlash. You'll have to select individual components
+	  under the corresponding menu.
+
 source "drivers/memory/samsung/Kconfig"
 source "drivers/memory/tegra/Kconfig"
 

drivers/memory/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_JZ4780_NEMC)	+= jz4780-nemc.o
 obj-$(CONFIG_MTK_SMI)		+= mtk-smi.o
 obj-$(CONFIG_DA8XX_DDRCTL)	+= da8xx-ddrctl.o
 obj-$(CONFIG_PL353_SMC)		+= pl353-smc.o
+obj-$(CONFIG_RENESAS_RPCIF)	+= renesas-rpc-if.o
 
 obj-$(CONFIG_SAMSUNG_MC)	+= samsung/
 obj-$(CONFIG_TEGRA_MC)		+= tegra/

include/memory/renesas-rpc-if.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Renesas RPC-IF core driver
+ *
+ * Copyright (C) 2018~2019 Renesas Solutions Corp.
+ * Copyright (C) 2019 Macronix International Co., Ltd.
+ * Copyright (C) 2019-2020 Cogent Embedded, Inc.
+ */
+
+#ifndef __RENESAS_RPC_IF_H
+#define __RENESAS_RPC_IF_H
+
+#include <linux/types.h>
+
+enum rpcif_data_dir {
+	RPCIF_NO_DATA,
+	RPCIF_DATA_IN,
+	RPCIF_DATA_OUT,
+};
+
+struct	rpcif_op {
+	struct {
+		u8 buswidth;
+		u8 opcode;
+		bool ddr;
+	} cmd, ocmd;
+
+	struct {
+		u8 nbytes;
+		u8 buswidth;
+		bool ddr;
+		u64 val;
+	} addr;
+
+	struct {
+		u8 ncycles;
+		u8 buswidth;
+	} dummy;
+
+	struct {
+		u8 nbytes;
+		u8 buswidth;
+		bool ddr;
+		u32 val;
+	} option;
+
+	struct {
+		u8 buswidth;
+		unsigned int nbytes;
+		enum rpcif_data_dir dir;
+		bool ddr;
+		union {
+			void *in;
+			const void *out;
+		} buf;
+	} data;
+};
+
+struct	rpcif {
+	struct device *dev;
+	void __iomem *dirmap;
+	struct regmap *regmap;
+	struct reset_control *rstc;
+	size_t size;
+	enum rpcif_data_dir dir;
+	u8 bus_size;
+	void *buffer;
+	u32 xferlen;
+	u32 smcr;
+	u32 smadr;
+	u32 command;		/* DRCMR or SMCMR */
+	u32 option;		/* DROPR or SMOPR */
+	u32 enable;		/* DRENR or SMENR */
+	u32 dummy;		/* DRDMCR or SMDMCR */
+	u32 ddr;		/* DRDRENR or SMDRENR */
+};
+
+int  rpcif_sw_init(struct rpcif *rpc, struct device *dev);
+void rpcif_hw_init(struct rpcif *rpc, bool hyperflash);
+void rpcif_enable_rpm(struct rpcif *rpc);
+void rpcif_disable_rpm(struct rpcif *rpc);
+void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
+		   size_t *len);
+int rpcif_manual_xfer(struct rpcif *rpc);
+ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf);
+
+#endif // __RENESAS_RPC_IF_H