Commit d93a47f7 authored by Daniel Borkmann's avatar Daniel Borkmann Committed by David S. Miller

bpf, s390: add support for constant blinding

This patch adds recently added constant blinding helpers into the
s390 eBPF JIT. In the bpf_int_jit_compile() path, requirements are
to utilize bpf_jit_blind_constants()/bpf_jit_prog_release_other()
pair for rewriting the program into a blinded one, and to map the
BPF_REG_AX register to a CPU register. The mapping of BPF_REG_AX
is at r12 and similarly like in x86 case performs reloading when
ld_abs/ind is used. When blinding is not used, there's no additional
overhead in the generated image.

When BPF_REG_AX is used, we don't need to emit skb->data reload when
helper function changed skb->data, as this will be reloaded later
on anyway from stack on ld_abs/ind, where skb->data is needed. s390
allows for this w/o much additional complexity unlike f.e. x86.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 26eb042e
......@@ -54,16 +54,17 @@ struct bpf_jit {
#define SEEN_FUNC 16 /* calls C functions */
#define SEEN_TAIL_CALL 32 /* code uses tail calls */
#define SEEN_SKB_CHANGE 64 /* code changes skb data */
#define SEEN_REG_AX 128 /* code uses constant blinding */
#define SEEN_STACK (SEEN_FUNC | SEEN_MEM | SEEN_SKB)
/*
* s390 registers
*/
#define REG_W0 (__MAX_BPF_REG+0) /* Work register 1 (even) */
#define REG_W1 (__MAX_BPF_REG+1) /* Work register 2 (odd) */
#define REG_SKB_DATA (__MAX_BPF_REG+2) /* SKB data register */
#define REG_L (__MAX_BPF_REG+3) /* Literal pool register */
#define REG_15 (__MAX_BPF_REG+4) /* Register 15 */
#define REG_W0 (MAX_BPF_JIT_REG + 0) /* Work register 1 (even) */
#define REG_W1 (MAX_BPF_JIT_REG + 1) /* Work register 2 (odd) */
#define REG_SKB_DATA (MAX_BPF_JIT_REG + 2) /* SKB data register */
#define REG_L (MAX_BPF_JIT_REG + 3) /* Literal pool register */
#define REG_15 (MAX_BPF_JIT_REG + 4) /* Register 15 */
#define REG_0 REG_W0 /* Register 0 */
#define REG_1 REG_W1 /* Register 1 */
#define REG_2 BPF_REG_1 /* Register 2 */
......@@ -88,6 +89,8 @@ static const int reg2hex[] = {
[BPF_REG_9] = 10,
/* BPF stack pointer */
[BPF_REG_FP] = 13,
/* Register for blinding (shared with REG_SKB_DATA) */
[BPF_REG_AX] = 12,
/* SKB data pointer */
[REG_SKB_DATA] = 12,
/* Work registers for s390x backend */
......@@ -385,7 +388,7 @@ static void save_restore_regs(struct bpf_jit *jit, int op)
/*
* For SKB access %b1 contains the SKB pointer. For "bpf_jit.S"
* we store the SKB header length on the stack and the SKB data
* pointer in REG_SKB_DATA.
* pointer in REG_SKB_DATA if BPF_REG_AX is not used.
*/
static void emit_load_skb_data_hlen(struct bpf_jit *jit)
{
......@@ -397,6 +400,7 @@ static void emit_load_skb_data_hlen(struct bpf_jit *jit)
offsetof(struct sk_buff, data_len));
/* stg %w1,ST_OFF_HLEN(%r0,%r15) */
EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15, STK_OFF_HLEN);
if (!(jit->seen & SEEN_REG_AX))
/* lg %skb_data,data_off(%b1) */
EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
BPF_REG_1, offsetof(struct sk_buff, data));
......@@ -487,6 +491,8 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
s32 imm = insn->imm;
s16 off = insn->off;
if (dst_reg == BPF_REG_AX || src_reg == BPF_REG_AX)
jit->seen |= SEEN_REG_AX;
switch (insn->code) {
/*
* BPF_MOV
......@@ -1188,7 +1194,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
/*
* Implicit input:
* BPF_REG_6 (R7) : skb pointer
* REG_SKB_DATA (R12): skb data pointer
* REG_SKB_DATA (R12): skb data pointer (if no BPF_REG_AX)
*
* Calculated input:
* BPF_REG_2 (R3) : offset of byte(s) to fetch in skb
......@@ -1209,6 +1215,11 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
/* agfr %b2,%src (%src is s32 here) */
EMIT4(0xb9180000, BPF_REG_2, src_reg);
/* Reload REG_SKB_DATA if BPF_REG_AX is used */
if (jit->seen & SEEN_REG_AX)
/* lg %skb_data,data_off(%b6) */
EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
BPF_REG_6, offsetof(struct sk_buff, data));
/* basr %b5,%w1 (%b5 is call saved) */
EMIT2(0x0d00, BPF_REG_5, REG_W1);
......@@ -1264,36 +1275,60 @@ void bpf_jit_compile(struct bpf_prog *fp)
*/
struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
{
struct bpf_prog *tmp, *orig_fp = fp;
struct bpf_binary_header *header;
bool tmp_blinded = false;
struct bpf_jit jit;
int pass;
if (!bpf_jit_enable)
return fp;
return orig_fp;
tmp = bpf_jit_blind_constants(fp);
/*
* If blinding was requested and we failed during blinding,
* we must fall back to the interpreter.
*/
if (IS_ERR(tmp))
return orig_fp;
if (tmp != fp) {
tmp_blinded = true;
fp = tmp;
}
memset(&jit, 0, sizeof(jit));
jit.addrs = kcalloc(fp->len + 1, sizeof(*jit.addrs), GFP_KERNEL);
if (jit.addrs == NULL)
return fp;
if (jit.addrs == NULL) {
fp = orig_fp;
goto out;
}
/*
* Three initial passes:
* - 1/2: Determine clobbered registers
* - 3: Calculate program size and addrs arrray
*/
for (pass = 1; pass <= 3; pass++) {
if (bpf_jit_prog(&jit, fp))
if (bpf_jit_prog(&jit, fp)) {
fp = orig_fp;
goto free_addrs;
}
}
/*
* Final pass: Allocate and generate program
*/
if (jit.size >= BPF_SIZE_MAX)
if (jit.size >= BPF_SIZE_MAX) {
fp = orig_fp;
goto free_addrs;
}
header = bpf_jit_binary_alloc(jit.size, &jit.prg_buf, 2, jit_fill_hole);
if (!header)
if (!header) {
fp = orig_fp;
goto free_addrs;
if (bpf_jit_prog(&jit, fp))
}
if (bpf_jit_prog(&jit, fp)) {
fp = orig_fp;
goto free_addrs;
}
if (bpf_jit_enable > 1) {
bpf_jit_dump(fp->len, jit.size, pass, jit.prg_buf);
if (jit.prg_buf)
......@@ -1306,6 +1341,10 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
}
free_addrs:
kfree(jit.addrs);
out:
if (tmp_blinded)
bpf_jit_prog_release_other(fp, fp == orig_fp ?
tmp : orig_fp);
return fp;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment