Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:

 - Add Daniel Lezcano as the reviewer of thermal framework and SoC
   driver changes (Daniel Lezcano).

 - Fix a bug in intel_dts_soc_thermal driver, which does not translate
   IO-APIC GSI (Global System Interrupt) into Linux irq number (Hans de
   Goede).

 - For device tree bindings, allow cooling devices sharing same trip
   point with same contribution value to share cooling map (Viresh
   Kumar).

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  dt-bindings: thermal: Allow multiple devices to share cooling map
  MAINTAINERS: Add Daniel Lezcano as designated reviewer for thermal
  Thermal: Intel SoC DTS: Translate IO-APIC GSI number to linux irq number

Documentation/devicetree/bindings/thermal/thermal.txt

@@ -97,8 +97,8 @@ get assigned to trip points of the zone. The cooling devices are expected
 to be loaded in the target system.
 
 Required properties:
-- cooling-device:	A phandle of a cooling device with its specifier,
-  Type: phandle +	referring to which cooling device is used in this
+- cooling-device:	A list of phandles of cooling devices with their specifiers,
+  Type: phandle +	referring to which cooling devices are used in this
     cooling specifier	binding. In the cooling specifier, the first cell
 			is the minimum cooling state and the second cell
 			is the maximum cooling state used in this map.
@@ -276,12 +276,7 @@ thermal-zones {
 			};
 			map1 {
 				trip = <&cpu_alert1>;
-				cooling-device = <&fan0 5 THERMAL_NO_LIMIT>;
-			};
-			map2 {
-				trip = <&cpu_alert1>;
-				cooling-device =
-				    <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				cooling-device = <&fan0 5 THERMAL_NO_LIMIT>, <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 			};
 		};
 	};

MAINTAINERS

@@ -14410,6 +14410,7 @@ F:	drivers/media/radio/radio-raremono.c
 THERMAL
 M:	Zhang Rui <rui.zhang@intel.com>
 M:	Eduardo Valentin <edubezval@gmail.com>
+R:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git

drivers/thermal/Kconfig

@@ -360,7 +360,7 @@ config INTEL_SOC_DTS_IOSF_CORE
 
 config INTEL_SOC_DTS_THERMAL
 	tristate "Intel SoCs DTS thermal driver"
-	depends on X86 && PCI
+	depends on X86 && PCI && ACPI
 	select INTEL_SOC_DTS_IOSF_CORE
 	select THERMAL_WRITABLE_TRIPS
 	help

drivers/thermal/intel_soc_dts_thermal.c

@@ -15,6 +15,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <asm/cpu_device_id.h>
@@ -31,6 +32,7 @@ MODULE_PARM_DESC(crit_offset,
 /* IRQ 86 is a fixed APIC interrupt for BYT DTS Aux threshold notifications */
 #define BYT_SOC_DTS_APIC_IRQ	86
 
+static int soc_dts_thres_gsi;
 static int soc_dts_thres_irq;
 static struct intel_soc_dts_sensors *soc_dts;
 
@@ -65,7 +67,21 @@ static int __init intel_soc_thermal_init(void)
 		return err;
 	}
 
-	soc_dts_thres_irq = (int)match_cpu->driver_data;
+	soc_dts_thres_gsi = (int)match_cpu->driver_data;
+	if (soc_dts_thres_gsi) {
+		/*
+		 * Note the flags here MUST match the firmware defaults, rather
+		 * then the request_irq flags, otherwise we get an EBUSY error.
+		 */
+		soc_dts_thres_irq = acpi_register_gsi(NULL, soc_dts_thres_gsi,
+						      ACPI_LEVEL_SENSITIVE,
+						      ACPI_ACTIVE_LOW);
+		if (soc_dts_thres_irq < 0) {
+			pr_warn("intel_soc_dts: Could not get IRQ for GSI %d, err %d\n",
+				soc_dts_thres_gsi, soc_dts_thres_irq);
+			soc_dts_thres_irq = 0;
+		}
+	}
 
 	if (soc_dts_thres_irq) {
 		err = request_threaded_irq(soc_dts_thres_irq, NULL,
@@ -90,8 +106,10 @@ static int __init intel_soc_thermal_init(void)
 	return 0;
 
 error_trips:
-	if (soc_dts_thres_irq)
+	if (soc_dts_thres_irq) {
 		free_irq(soc_dts_thres_irq, soc_dts);
+		acpi_unregister_gsi(soc_dts_thres_gsi);
+	}
 	intel_soc_dts_iosf_exit(soc_dts);
 
 	return err;
@@ -99,8 +117,10 @@ static int __init intel_soc_thermal_init(void)
 
 static void __exit intel_soc_thermal_exit(void)
 {
-	if (soc_dts_thres_irq)
+	if (soc_dts_thres_irq) {
 		free_irq(soc_dts_thres_irq, soc_dts);
+		acpi_unregister_gsi(soc_dts_thres_gsi);
+	}
 	intel_soc_dts_iosf_exit(soc_dts);
 }