Merge branch 'sh/dynamic-irq-cleanup' into sh-latest

Conflicts:
	drivers/sh/intc/dynamic.c
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/boards/Kconfig

@@ -44,6 +44,8 @@ config SH_7721_SOLUTION_ENGINE
 config SH_7722_SOLUTION_ENGINE
 	bool "SolutionEngine7722"
 	select SOLUTION_ENGINE
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
 	depends on CPU_SUBTYPE_SH7722
 	help
 	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
@@ -80,6 +82,8 @@ config SH_7780_SOLUTION_ENGINE
 config SH_7343_SOLUTION_ENGINE
 	bool "SolutionEngine7343"
 	select SOLUTION_ENGINE
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
 	depends on CPU_SUBTYPE_SH7343
 	help
 	  Select 7343 SolutionEngine if configuring for a Hitachi
@@ -295,6 +299,7 @@ config SH_X3PROTO
 	bool "SH-X3 Prototype board"
 	depends on CPU_SUBTYPE_SHX3
 	select NO_IOPORT if !PCI
+	select IRQ_DOMAIN
 
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"

arch/sh/boards/mach-dreamcast/irq.c

@@ -8,10 +8,11 @@
  * This file is part of the LinuxDC project (www.linuxdc.org)
  * Released under the terms of the GNU GPL v2.0
  */
-
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
+#include <linux/export.h>
+#include <linux/err.h>
 #include <mach/sysasic.h>
 
 /*
@@ -141,26 +142,15 @@ int systemasic_irq_demux(int irq)
 
 void systemasic_irq_init(void)
 {
-	int i, nid = cpu_to_node(boot_cpu_data);
-
-	/* Assign all virtual IRQs to the System ASIC int. handler */
-	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) {
-		unsigned int irq;
-
-		irq = create_irq_nr(i, nid);
-		if (unlikely(irq == 0)) {
-			pr_err("%s: failed hooking irq %d for systemasic\n",
-			       __func__, i);
-			return;
-		}
+	int irq_base, i;
 
-		if (unlikely(irq != i)) {
-			pr_err("%s: got irq %d but wanted %d, bailing.\n",
-			       __func__, irq, i);
-			destroy_irq(irq);
-			return;
-		}
+	irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE,
+				   HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1);
+	if (IS_ERR_VALUE(irq_base)) {
+		pr_err("%s: failed hooking irqs\n", __func__);
+		return;
+	}
 
+	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
 		irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq);
-	}
 }

arch/sh/boards/mach-se/7343/irq.c

 /*
- * linux/arch/sh/boards/se/7343/irq.c
+ * Hitachi UL SolutionEngine 7343 FPGA IRQ Support.
  *
  * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2012  Paul Mundt
  *
- * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Based on linux/arch/sh/boards/se/7343/irq.c
  * Copyright (C) 2007  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#define DRV_NAME "SE7343-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#define irq_reg_readl	ioread16
+#define irq_reg_writel	iowrite16
+
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/irqdomain.h>
 #include <linux/io.h>
+#include <asm/sizes.h>
 #include <mach-se/mach/se7343.h>
 
-unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, };
+#define PA_CPLD_BASE_ADDR	0x11400000
+#define PA_CPLD_ST_REG		0x08	/* CPLD Interrupt status register */
+#define PA_CPLD_IMSK_REG	0x0a	/* CPLD Interrupt mask register */
 
-static void disable_se7343_irq(struct irq_data *data)
-{
-	unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
-	__raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
-}
+static void __iomem *se7343_irq_regs;
+struct irq_domain *se7343_irq_domain;
 
-static void enable_se7343_irq(struct irq_data *data)
+static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
-	__raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
-}
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int bit;
 
-static struct irq_chip se7343_irq_chip __read_mostly = {
-	.name		= "SE7343-FPGA",
-	.irq_mask	= disable_se7343_irq,
-	.irq_unmask	= enable_se7343_irq,
-};
+	chip->irq_mask_ack(data);
 
-static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
+	mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG);
+
+	for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR)
+		generic_handle_irq(irq_linear_revmap(se7343_irq_domain, bit));
+
+	chip->irq_unmask(data);
+}
+
+static void __init se7343_domain_init(void)
 {
-	unsigned short intv = __raw_readw(PA_CPLD_ST);
-	unsigned int ext_irq = 0;
+	int i;
 
-	intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
+	se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
+						  &irq_domain_simple_ops, NULL);
+	if (unlikely(!se7343_irq_domain)) {
+		printk("Failed to get IRQ domain\n");
+		return;
+	}
 
-	for (; intv; intv >>= 1, ext_irq++) {
-		if (!(intv & 1))
-			continue;
+	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
+		int irq = irq_create_mapping(se7343_irq_domain, i);
 
-		generic_handle_irq(se7343_fpga_irq[ext_irq]);
+		if (unlikely(irq == 0)) {
+			printk("Failed to allocate IRQ %d\n", i);
+			return;
+		}
 	}
 }
 
-/*
- * Initialize IRQ setting
- */
-void __init init_7343se_IRQ(void)
+static void __init se7343_gc_init(void)
 {
-	int i, irq;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	unsigned int irq_base;
 
-	__raw_writew(0, PA_CPLD_IMSK);	/* disable all irqs */
-	__raw_writew(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+	irq_base = irq_linear_revmap(se7343_irq_domain, 0);
 
-	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
-		irq = create_irq();
-		if (irq < 0)
-			return;
-		se7343_fpga_irq[i] = irq;
+	gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs,
+				    handle_level_irq);
+	if (unlikely(!gc))
+		return;
 
-		irq_set_chip_and_handler_name(se7343_fpga_irq[i],
-					      &se7343_irq_chip,
-					      handle_level_irq,
-					      "level");
+	ct = gc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
 
-		irq_set_chip_data(se7343_fpga_irq[i], (void *)i);
-	}
+	ct->regs.mask = PA_CPLD_IMSK_REG;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR),
+			       IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
 
 	irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
 	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
 	irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
 	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
 	irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
 	irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+
 	irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
 	irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
 }
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7343se_IRQ(void)
+{
+	se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16);
+	if (unlikely(!se7343_irq_regs)) {
+		pr_err("Failed to remap CPLD\n");
+		return;
+	}
+
+	/*
+	 * All FPGA IRQs disabled by default
+	 */
+	iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG);
+
+	__raw_writew(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+
+	se7343_domain_init();
+	se7343_gc_init();
+}

arch/sh/boards/mach-se/7343/setup.c

@@ -5,6 +5,7 @@
 #include <linux/serial_reg.h>
 #include <linux/usb/isp116x.h>
 #include <linux/delay.h>
+#include <linux/irqdomain.h>
 #include <asm/machvec.h>
 #include <mach-se/mach/se7343.h>
 #include <asm/heartbeat.h>
@@ -145,11 +146,12 @@ static struct platform_device *sh7343se_platform_devices[] __initdata = {
 static int __init sh7343se_devices_setup(void)
 {
 	/* Wire-up dynamic vectors */
-	serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA];
-	serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB];
-
+	serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTA);
+	serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTB);
 	usb_resources[2].start = usb_resources[2].end =
-		se7343_fpga_irq[SE7343_FPGA_IRQ_USB];
+		irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
 
 	return platform_add_devices(sh7343se_platform_devices,
 				    ARRAY_SIZE(sh7343se_platform_devices));

arch/sh/boards/mach-se/7722/irq.c

 /*
- * linux/arch/sh/boards/se/7722/irq.c
+ * Hitachi UL SolutionEngine 7722 FPGA IRQ Support.
  *
  * Copyright (C) 2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
+ * Copyright (C) 2012  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#define DRV_NAME "SE7722-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#define irq_reg_readl	ioread16
+#define irq_reg_writel	iowrite16
+
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <asm/sizes.h>
 #include <mach-se/mach/se7722.h>
 
-unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
+#define IRQ01_BASE_ADDR	0x11800000
+#define IRQ01_MODE_REG	0
+#define IRQ01_STS_REG	4
+#define IRQ01_MASK_REG	8
 
-static void disable_se7722_irq(struct irq_data *data)
-{
-	unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
-	__raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
-}
+static void __iomem *se7722_irq_regs;
+struct irq_domain *se7722_irq_domain;
 
-static void enable_se7722_irq(struct irq_data *data)
+static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
-	__raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
-}
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int bit;
 
-static struct irq_chip se7722_irq_chip __read_mostly = {
-	.name		= "SE7722-FPGA",
-	.irq_mask	= disable_se7722_irq,
-	.irq_unmask	= enable_se7722_irq,
-};
+	chip->irq_mask_ack(data);
 
-static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
+	mask = ioread16(se7722_irq_regs + IRQ01_STS_REG);
+
+	for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR)
+		generic_handle_irq(irq_linear_revmap(se7722_irq_domain, bit));
+
+	chip->irq_unmask(data);
+}
+
+static void __init se7722_domain_init(void)
 {
-	unsigned short intv = __raw_readw(IRQ01_STS);
-	unsigned int ext_irq = 0;
+	int i;
 
-	intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
+	se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR,
+						  &irq_domain_simple_ops, NULL);
+	if (unlikely(!se7722_irq_domain)) {
+		printk("Failed to get IRQ domain\n");
+		return;
+	}
 
-	for (; intv; intv >>= 1, ext_irq++) {
-		if (!(intv & 1))
-			continue;
+	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
+		int irq = irq_create_mapping(se7722_irq_domain, i);
 
-		generic_handle_irq(se7722_fpga_irq[ext_irq]);
+		if (unlikely(irq == 0)) {
+			printk("Failed to allocate IRQ %d\n", i);
+			return;
+		}
 	}
 }
 
-/*
- * Initialize IRQ setting
- */
-void __init init_se7722_IRQ(void)
+static void __init se7722_gc_init(void)
 {
-	int i, irq;
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	unsigned int irq_base;
 
-	__raw_writew(0, IRQ01_MASK);       /* disable all irqs */
-	__raw_writew(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+	irq_base = irq_linear_revmap(se7722_irq_domain, 0);
 
-	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
-		irq = create_irq();
-		if (irq < 0)
-			return;
-		se7722_fpga_irq[i] = irq;
+	gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs,
+				    handle_level_irq);
+	if (unlikely(!gc))
+		return;
 
-		irq_set_chip_and_handler_name(se7722_fpga_irq[i],
-					      &se7722_irq_chip,
-					      handle_level_irq,
-					      "level");
+	ct = gc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
 
-		irq_set_chip_data(se7722_fpga_irq[i], (void *)i);
-	}
+	ct->regs.mask = IRQ01_MASK_REG;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR),
+			       IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
 
 	irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux);
 	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
@@ -81,3 +98,25 @@ void __init init_se7722_IRQ(void)
 	irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux);
 	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
 }
+
+/*
+ * Initialize FPGA IRQs
+ */
+void __init init_se7722_IRQ(void)
+{
+	se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16);
+	if (unlikely(!se7722_irq_regs)) {
+		printk("Failed to remap IRQ01 regs\n");
+		return;
+	}
+
+	/*
+	 * All FPGA IRQs disabled by default
+	 */
+	iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG);
+
+	__raw_writew(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+
+	se7722_domain_init();
+	se7722_gc_init();
+}

arch/sh/boards/mach-se/7722/setup.c

@@ -2,6 +2,7 @@
  * linux/arch/sh/boards/se/7722/setup.c
  *
  * Copyright (C) 2007 Nobuhiro Iwamatsu
+ * Copyright (C) 2012 Paul Mundt
  *
  * Hitachi UL SolutionEngine 7722 Support.
  *
@@ -15,6 +16,7 @@
 #include <linux/ata_platform.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/irqdomain.h>
 #include <linux/smc91x.h>
 #include <linux/sh_intc.h>
 #include <mach-se/mach/se7722.h>
@@ -143,10 +145,10 @@ static int __init se7722_devices_setup(void)
 
 	/* Wire-up dynamic vectors */
 	cf_ide_resources[2].start = cf_ide_resources[2].end =
-		se7722_fpga_irq[SE7722_FPGA_IRQ_MRSHPC0];
+		irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0);
 
 	smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
-		se7722_fpga_irq[SE7722_FPGA_IRQ_SMC];
+		irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC);
 
 	return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
 }

arch/sh/boards/mach-se/7724/irq.c

@@ -17,8 +17,10 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/export.h>
+#include <linux/topology.h>
+#include <linux/io.h>
+#include <linux/err.h>
 #include <mach-se/mach/se7724.h>
 
 struct fpga_irq {
@@ -111,7 +113,7 @@ static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
  */
 void __init init_se7724_IRQ(void)
 {
-	int i, nid = cpu_to_node(boot_cpu_data);
+	int irq_base, i;
 
 	__raw_writew(0xffff, IRQ0_MR);  /* mask all */
 	__raw_writew(0xffff, IRQ1_MR);  /* mask all */
@@ -121,28 +123,16 @@ void __init init_se7724_IRQ(void)
 	__raw_writew(0x0000, IRQ2_SR);  /* clear irq */
 	__raw_writew(0x002a, IRQ_MODE); /* set irq type */
 
-	for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) {
-		int irq, wanted;
-
-		wanted = SE7724_FPGA_IRQ_BASE + i;
-
-		irq = create_irq_nr(wanted, nid);
-		if (unlikely(irq == 0)) {
-			pr_err("%s: failed hooking irq %d for FPGA\n",
-			       __func__, wanted);
-			return;
-		}
-
-		if (unlikely(irq != wanted)) {
-			pr_err("%s: got irq %d but wanted %d, bailing.\n",
-			       __func__, irq, wanted);
-			destroy_irq(irq);
-			return;
-		}
+	irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE,
+				   SE7724_FPGA_IRQ_NR, numa_node_id());
+	if (IS_ERR_VALUE(irq_base)) {
+		pr_err("%s: failed hooking irqs for FPGA\n", __func__);
+		return;
+	}
 
-		irq_set_chip_and_handler_name(irq, &se7724_irq_chip,
+	for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
+		irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip,
 					      handle_level_irq, "level");
-	}
 
 	irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux);
 	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);

arch/sh/boards/mach-x3proto/gpio.c

@@ -3,7 +3,7 @@
  *
  * Renesas SH-X3 Prototype Baseboard GPIO Support.
  *
- * Copyright (C) 2010  Paul Mundt
+ * Copyright (C) 2010 - 2012  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
+#include <linux/irqdomain.h>
 #include <linux/io.h>
 #include <mach/ilsel.h>
 #include <mach/hardware.h>
@@ -26,7 +27,7 @@
 #define KEYDETR 0xb81c0004
 
 static DEFINE_SPINLOCK(x3proto_gpio_lock);
-static unsigned int x3proto_gpio_irq_map[NR_BASEBOARD_GPIOS] = { 0, };
+static struct irq_domain *x3proto_irq_domain;
 
 static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 {
@@ -49,7 +50,14 @@ static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio)
 
 static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
 {
-	return x3proto_gpio_irq_map[gpio];
+	int virq;
+
+	if (gpio < chip->ngpio)
+		virq = irq_create_mapping(x3proto_irq_domain, gpio);
+	else
+		virq = -ENXIO;
+
+	return virq;
 }
 
 static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
@@ -62,9 +70,8 @@ static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	chip->irq_mask_ack(data);
 
 	mask = __raw_readw(KEYDETR);
-
 	for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS)
-		generic_handle_irq(x3proto_gpio_to_irq(NULL, pin));
+		generic_handle_irq(irq_linear_revmap(x3proto_irq_domain, pin));
 
 	chip->irq_unmask(data);
 }
@@ -78,10 +85,23 @@ struct gpio_chip x3proto_gpio_chip = {
 	.ngpio			= NR_BASEBOARD_GPIOS,
 };
 
+static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq,
+				irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq,
+				      "gpio");
+
+	return 0;
+}
+
+static struct irq_domain_ops x3proto_gpio_irq_ops = {
+	.map	= x3proto_gpio_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
 int __init x3proto_gpio_setup(void)
 {
-	int ilsel;
-	int ret, i;
+	int ilsel, ret;
 
 	ilsel = ilsel_enable(ILSEL_KEY);
 	if (unlikely(ilsel < 0))
@@ -91,21 +111,10 @@ int __init x3proto_gpio_setup(void)
 	if (unlikely(ret))
 		goto err_gpio;
 
-	for (i = 0; i < NR_BASEBOARD_GPIOS; i++) {
-		unsigned long flags;
-		int irq = create_irq();
-
-		if (unlikely(irq < 0)) {
-			ret = -EINVAL;
-			goto err_irq;
-		}
-
-		spin_lock_irqsave(&x3proto_gpio_lock, flags);
-		x3proto_gpio_irq_map[i] = irq;
-		irq_set_chip_and_handler_name(irq, &dummy_irq_chip,
-					      handle_simple_irq, "gpio");
-		spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
-	}
+	x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS,
+						   &x3proto_gpio_irq_ops, NULL);
+	if (unlikely(!x3proto_irq_domain))
+		goto err_irq;
 
 	pr_info("registering '%s' support, handling GPIOs %u -> %u, "
 		"bound to IRQ %u\n",
@@ -119,10 +128,6 @@ int __init x3proto_gpio_setup(void)
 	return 0;
 
 err_irq:
-	for (; i >= 0; --i)
-		if (x3proto_gpio_irq_map[i])
-			destroy_irq(x3proto_gpio_irq_map[i]);
-
 	ret = gpiochip_remove(&x3proto_gpio_chip);
 	if (unlikely(ret))
 		pr_err("Failed deregistering GPIO\n");

arch/sh/cchips/hd6446x/hd64461.c

@@ -73,10 +73,7 @@ static void hd64461_irq_demux(unsigned int irq, struct irq_desc *desc)
 
 int __init setup_hd64461(void)
 {
-	int i, nid = cpu_to_node(boot_cpu_data);
-
-	if (!MACH_HD64461)
-		return 0;
+	int irq_base, i;
 
 	printk(KERN_INFO
 	       "HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n",
@@ -89,28 +86,16 @@ int __init setup_hd64461(void)
 #endif
 	__raw_writew(0xffff, HD64461_NIMR);
 
-	/*  IRQ 80 -> 95 belongs to HD64461  */
-	for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++) {
-		unsigned int irq;
-
-		irq = create_irq_nr(i, nid);
-		if (unlikely(irq == 0)) {
-			pr_err("%s: failed hooking irq %d for HD64461\n",
-			       __func__, i);
-			return -EBUSY;
-		}
-
-		if (unlikely(irq != i)) {
-			pr_err("%s: got irq %d but wanted %d, bailing.\n",
-			       __func__, irq, i);
-			destroy_irq(irq);
-			return -EINVAL;
-		}
-
-		irq_set_chip_and_handler(i, &hd64461_irq_chip,
-					 handle_level_irq);
+	irq_base = irq_alloc_descs(HD64461_IRQBASE, HD64461_IRQBASE, 16, -1);
+	if (IS_ERR_VALUE(irq_base)) {
+		pr_err("%s: failed hooking irqs for HD64461\n", __func__);
+		return irq_base;
 	}
 
+	for (i = 0; i < 16; i++)
+		irq_set_chip_and_handler(irq_base + i, &hd64461_irq_chip,
+					 handle_level_irq);
+
 	irq_set_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
 	irq_set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
 

arch/sh/include/mach-se/mach/se7343.h

@@ -50,9 +50,6 @@
 #define PA_LED		0xb0C00000	/* LED */
 #define LED_SHIFT       0
 #define PA_DIPSW	0xb0900000	/* Dip switch 31 */
-#define PA_CPLD_MODESET	0xb1400004	/* CPLD Mode set register */
-#define PA_CPLD_ST	0xb1400008	/* CPLD Interrupt status register */
-#define PA_CPLD_IMSK	0xb140000a	/* CPLD Interrupt mask register */
 /* Area 5 */
 #define PA_EXT5		0x14000000
 #define PA_EXT5_SIZE	0x04000000
@@ -135,8 +132,10 @@
 
 #define SE7343_FPGA_IRQ_NR	12
 
+struct irq_domain;
+
 /* arch/sh/boards/se/7343/irq.c */
-extern unsigned int se7343_fpga_irq[];
+extern struct irq_domain *se7343_irq_domain;
 
 void init_7343se_IRQ(void);
 

arch/sh/include/mach-se/mach/se7722.h

@@ -81,12 +81,6 @@
 #define IRQ0_IRQ        evt2irq(0x600)
 #define IRQ1_IRQ        evt2irq(0x620)
 
-#define IRQ01_MODE      0xb1800000
-#define IRQ01_STS       0xb1800004
-#define IRQ01_MASK      0xb1800008
-
-/* Bits in IRQ01_* registers */
-
 #define SE7722_FPGA_IRQ_USB	0 /* IRQ0 */
 #define SE7722_FPGA_IRQ_SMC	1 /* IRQ0 */
 #define SE7722_FPGA_IRQ_MRSHPC0	2 /* IRQ1 */
@@ -95,8 +89,10 @@
 #define SE7722_FPGA_IRQ_MRSHPC3	5 /* IRQ1 */
 #define SE7722_FPGA_IRQ_NR	6
 
+struct irq_domain;
+
 /* arch/sh/boards/se/7722/irq.c */
-extern unsigned int se7722_fpga_irq[];
+extern struct irq_domain *se7722_irq_domain;
 
 void init_se7722_IRQ(void);
 

drivers/sh/intc/Makefile

-obj-y 	:= access.o chip.o core.o dynamic.o handle.o virq.o
+obj-y 	:= access.o chip.o core.o handle.o virq.o
 
 obj-$(CONFIG_INTC_BALANCING)		+= balancing.o
 obj-$(CONFIG_INTC_USERIMASK)		+= userimask.o

drivers/sh/intc/dynamic.c

-/*
- * Dynamic IRQ management
- *
- * Copyright (C) 2010  Paul Mundt
- *
- * Modelled after arch/x86/kernel/apic/io_apic.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#define pr_fmt(fmt) "intc: " fmt
-
-#include <linux/irq.h>
-#include <linux/bitmap.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include "internals.h" /* only for activate_irq() damage.. */
-
-/*
- * The IRQ bitmap provides a global map of bound IRQ vectors for a
- * given platform. Allocation of IRQs are either static through the CPU
- * vector map, or dynamic in the case of board mux vectors or MSI.
- *
- * As this is a central point for all IRQ controllers on the system,
- * each of the available sources are mapped out here. This combined with
- * sparseirq makes it quite trivial to keep the vector map tightly packed
- * when dynamically creating IRQs, as well as tying in to otherwise
- * unused irq_desc positions in the sparse array.
- */
-
-/*
- * Dynamic IRQ allocation and deallocation
- */
-unsigned int create_irq_nr(unsigned int irq_want, int node)
-{
-	int irq = irq_alloc_desc_at(irq_want, node);
-	if (irq < 0)
-		return 0;
-
-	activate_irq(irq);
-	return irq;
-}
-
-int create_irq(void)
-{
-	int irq = irq_alloc_desc(numa_node_id());
-	if (irq >= 0)
-		activate_irq(irq);
-
-	return irq;
-}
-
-void destroy_irq(unsigned int irq)
-{
-	irq_free_desc(irq);
-}

drivers/sh/intc/virq.c

@@ -219,12 +219,14 @@ static void __init intc_subgroup_map(struct intc_desc_int *d)
 		if (radix_tree_deref_retry(entry))
 			goto restart;
 
-		irq = create_irq();
+		irq = irq_alloc_desc(numa_node_id());
 		if (unlikely(irq < 0)) {
 			pr_err("no more free IRQs, bailing..\n");
 			break;
 		}
 
+		activate_irq(irq);
+
 		pr_info("Setting up a chained VIRQ from %d -> %d\n",
 			irq, entry->pirq);