USB serial: add driver pointer to all usb-serial drivers

Every usb serial driver should have a pointer to the corresponding usb driver.
So the usb serial core can add a new id not only to the usb serial driver, but
also to the usb driver.

Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag
no_dynamic_id=1. This is added now.
Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/aircable.c

@@ -572,8 +572,17 @@ static void aircable_unthrottle(struct usb_serial_port *port)
 		schedule_work(&priv->rx_work);
 }
 
+static struct usb_driver aircable_driver = {
+	.name =		"aircable",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.no_dynamic_id =	1,
+};
+
 static struct usb_serial_driver aircable_device = {
 	.description =		"aircable",
+	.usb_driver = 		&aircable_driver,
 	.id_table = 		id_table,
 	.num_ports =		1,
 	.attach =		aircable_attach,
@@ -587,13 +596,6 @@ static struct usb_serial_driver aircable_device = {
 	.unthrottle =		aircable_unthrottle,
 };
 
-static struct usb_driver aircable_driver = {
-	.name =		"aircable",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static int __init aircable_init (void)
 {
 	int retval;

drivers/usb/serial/airprime.c

@@ -277,6 +277,7 @@ static struct usb_serial_driver airprime_device = {
 		.owner =	THIS_MODULE,
 		.name =		"airprime",
 	},
+	.usb_driver =		&airprime_driver,
 	.id_table =		id_table,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,

drivers/usb/serial/ark3116.c

@@ -444,6 +444,7 @@ static struct usb_driver ark3116_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
+	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver ark3116_device = {
@@ -452,6 +453,7 @@ static struct usb_serial_driver ark3116_device = {
 		.name =		"ark3116",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&ark3116_driver,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,
 	.num_bulk_out =		1,

drivers/usb/serial/belkin_sa.c

@@ -126,6 +126,7 @@ static struct usb_serial_driver belkin_device = {
 		.name =		"belkin",
 	},
 	.description =		"Belkin / Peracom / GoHubs USB Serial Adapter",
+	.usb_driver =		&belkin_driver,
 	.id_table =		id_table_combined,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,

drivers/usb/serial/cp2101.c

@@ -89,6 +89,7 @@ static struct usb_serial_driver cp2101_device = {
 		.owner =	THIS_MODULE,
 		.name = 	"cp2101",
 	},
+	.usb_driver		= &cp2101_driver,
 	.id_table		= id_table,
 	.num_interrupt_in	= 0,
 	.num_bulk_in		= 0,

drivers/usb/serial/cyberjack.c

@@ -88,6 +88,7 @@ static struct usb_serial_driver cyberjack_device = {
 		.name =		"cyberjack",
 	},
 	.description =		"Reiner SCT Cyberjack USB card reader",
+	.usb_driver = 		&cyberjack_driver,
 	.id_table =		id_table,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,

drivers/usb/serial/cypress_m8.c

@@ -193,6 +193,7 @@ static struct usb_serial_driver cypress_earthmate_device = {
 		.name =			"earthmate",
 	},
 	.description =			"DeLorme Earthmate USB",
+	.usb_driver = 			&cypress_driver,
 	.id_table =			id_table_earthmate,
 	.num_interrupt_in = 		1,
 	.num_interrupt_out =		1,
@@ -222,6 +223,7 @@ static struct usb_serial_driver cypress_hidcom_device = {
 		.name =			"cyphidcom",
 	},
 	.description =			"HID->COM RS232 Adapter",
+	.usb_driver = 			&cypress_driver,
 	.id_table =			id_table_cyphidcomrs232,
 	.num_interrupt_in =		1,
 	.num_interrupt_out =		1,
@@ -251,6 +253,7 @@ static struct usb_serial_driver cypress_ca42v2_device = {
                 .name =			"nokiaca42v2",
 	},
 	.description =			"Nokia CA-42 V2 Adapter",
+	.usb_driver = 			&cypress_driver,
 	.id_table =			id_table_nokiaca42v2,
 	.num_interrupt_in =		1,
 	.num_interrupt_out =		1,

drivers/usb/serial/digi_acceleport.c

@@ -509,6 +509,7 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 		.name =			"digi_2",
 	},
 	.description =			"Digi 2 port USB adapter",
+	.usb_driver = 			&digi_driver,
 	.id_table =			id_table_2,
 	.num_interrupt_in =		0,
 	.num_bulk_in =			4,
@@ -538,6 +539,7 @@ static struct usb_serial_driver digi_acceleport_4_device = {
 		.name =			"digi_4",
 	},
 	.description =			"Digi 4 port USB adapter",
+	.usb_driver = 			&digi_driver,
 	.id_table =			id_table_4,
 	.num_interrupt_in =		0,
 	.num_bulk_in =			5,

drivers/usb/serial/empeg.c

@@ -117,6 +117,7 @@ static struct usb_serial_driver empeg_device = {
 		.name =		"empeg",
 	},
 	.id_table =		id_table,
+	.usb_driver = 		&empeg_driver,
 	.num_interrupt_in =	0,
 	.num_bulk_in =		1,
 	.num_bulk_out =		1,

drivers/usb/serial/ftdi_sio.c

@@ -615,6 +615,7 @@ static struct usb_serial_driver ftdi_sio_device = {
 		.name =		"ftdi_sio",
 	},
 	.description =		"FTDI USB Serial Device",
+	.usb_driver = 		&ftdi_driver ,
 	.id_table =		id_table_combined,
 	.num_interrupt_in =	0,
 	.num_bulk_in =		1,

drivers/usb/serial/funsoft.c

@@ -58,6 +58,7 @@ static struct usb_serial_driver funsoft_device = {
 		.name =		"funsoft",
 	},
 	.id_table =		id_table,
+	.usb_driver = 		&funsoft_driver,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
 	.num_bulk_out =		NUM_DONT_CARE,

drivers/usb/serial/garmin_gps.c

@@ -1566,6 +1566,7 @@ static struct usb_serial_driver garmin_device = {
 		.name        = "garmin_gps",
 	},
 	.description         = "Garmin GPS usb/tty",
+	.usb_driver          = &garmin_driver,
 	.id_table            = id_table,
 	.num_interrupt_in    = 1,
 	.num_bulk_in         = 1,

drivers/usb/serial/generic.c

@@ -20,6 +20,10 @@
 #include <linux/usb/serial.h>
 #include <asm/uaccess.h>
 
+static int generic_probe(struct usb_interface *interface,
+			 const struct usb_device_id *id);
+
+
 static int debug;
 
 #ifdef CONFIG_USB_SERIAL_GENERIC
@@ -34,6 +38,21 @@ MODULE_PARM_DESC(product, "User specified USB idProduct");
 
 static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
 
+/* we want to look at all devices, as the vendor/product id can change
+ * depending on the command line argument */
+static struct usb_device_id generic_serial_ids[] = {
+	{.driver_info = 42},
+	{}
+};
+
+static struct usb_driver generic_driver = {
+	.name =		"usbserial_generic",
+	.probe =	generic_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	generic_serial_ids,
+	.no_dynamic_id =	1,
+};
+
 /* All of the device info needed for the Generic Serial Converter */
 struct usb_serial_driver usb_serial_generic_device = {
 	.driver = {
@@ -41,6 +60,7 @@ struct usb_serial_driver usb_serial_generic_device = {
 		.name =		"generic",
 	},
 	.id_table =		generic_device_ids,
+	.usb_driver = 		&generic_driver,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
 	.num_bulk_out =		NUM_DONT_CARE,
@@ -48,13 +68,6 @@ struct usb_serial_driver usb_serial_generic_device = {
 	.shutdown =		usb_serial_generic_shutdown,
 };
 
-/* we want to look at all devices, as the vendor/product id can change
- * depending on the command line argument */
-static struct usb_device_id generic_serial_ids[] = {
-	{.driver_info = 42},
-	{}
-};
-
 static int generic_probe(struct usb_interface *interface,
 			       const struct usb_device_id *id)
 {
@@ -65,14 +78,6 @@ static int generic_probe(struct usb_interface *interface,
 		return usb_serial_probe(interface, id);
 	return -ENODEV;
 }
-
-static struct usb_driver generic_driver = {
-	.name =		"usbserial_generic",
-	.probe =	generic_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	generic_serial_ids,
-	.no_dynamic_id = 	1,
-};
 #endif
 
 int usb_serial_generic_register (int _debug)

drivers/usb/serial/hp4x.c

@@ -49,6 +49,7 @@ static struct usb_serial_driver hp49gp_device = {
 		.name =		"hp4X",
 	},
 	.id_table =		id_table,
+	.usb_driver = 		&hp49gp_driver,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
 	.num_bulk_out =		NUM_DONT_CARE,

drivers/usb/serial/io_edgeport.c

@@ -242,14 +242,6 @@ static void edge_shutdown		(struct usb_serial *serial);
 
 #include "io_tables.h"	/* all of the devices that this driver supports */
 
-static struct usb_driver io_driver = {
-	.name =		"io_edgeport",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table_combined,
-	.no_dynamic_id = 	1,
-};
-
 /* function prototypes for all of our local functions */
 static void  process_rcvd_data		(struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength);
 static void process_rcvd_status		(struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3);

drivers/usb/serial/io_tables.h

@@ -95,12 +95,21 @@ static struct usb_device_id id_table_combined [] = {
 
 MODULE_DEVICE_TABLE (usb, id_table_combined);
 
+static struct usb_driver io_driver = {
+	.name =		"io_edgeport",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table_combined,
+	.no_dynamic_id = 	1,
+};
+
 static struct usb_serial_driver edgeport_2port_device = {
 	.driver = {
 		.owner		= THIS_MODULE,
 		.name		= "edgeport_2",
 	},
 	.description		= "Edgeport 2 port adapter",
+	.usb_driver		= &io_driver,
 	.id_table		= edgeport_2port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -131,6 +140,7 @@ static struct usb_serial_driver edgeport_4port_device = {
 		.name		= "edgeport_4",
 	},
 	.description		= "Edgeport 4 port adapter",
+	.usb_driver		= &io_driver,
 	.id_table		= edgeport_4port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -161,6 +171,7 @@ static struct usb_serial_driver edgeport_8port_device = {
 		.name		= "edgeport_8",
 	},
 	.description		= "Edgeport 8 port adapter",
+	.usb_driver		= &io_driver,
 	.id_table		= edgeport_8port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,

drivers/usb/serial/io_ti.c

@@ -2979,6 +2979,7 @@ static struct usb_serial_driver edgeport_1port_device = {
 		.name		= "edgeport_ti_1",
 	},
 	.description		= "Edgeport TI 1 port adapter",
+	.usb_driver		= &io_driver,
 	.id_table		= edgeport_1port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -3009,6 +3010,7 @@ static struct usb_serial_driver edgeport_2port_device = {
 		.name		= "edgeport_ti_2",
 	},
 	.description		= "Edgeport TI 2 port adapter",
+	.usb_driver		= &io_driver,
 	.id_table		= edgeport_2port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 2,

drivers/usb/serial/ipaq.c

@@ -563,6 +563,7 @@ static struct usb_serial_driver ipaq_device = {
 		.name =		"ipaq",
 	},
 	.description =		"PocketPC PDA",
+	.usb_driver = 		&ipaq_driver,
 	.id_table =		ipaq_id_table,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		1,

drivers/usb/serial/ipw.c

@@ -442,6 +442,7 @@ static struct usb_serial_driver ipw_device = {
 		.name =		"ipw",
 	},
 	.description =		"IPWireless converter",
+	.usb_driver = 		&usb_ipw_driver,
 	.id_table =		usb_ipw_ids,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		1,

drivers/usb/serial/ir-usb.c

@@ -138,6 +138,7 @@ static struct usb_serial_driver ir_device = {
 		.name =		"ir-usb",
 	},
 	.description =		"IR Dongle",
+	.usb_driver = 		&ir_driver,
 	.id_table =		id_table,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,

drivers/usb/serial/keyspan.h

@@ -576,6 +576,7 @@ static struct usb_serial_driver keyspan_pre_device = {
 		.name		= "keyspan_no_firm",
 	},
 	.description		= "Keyspan - (without firmware)",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_pre_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
@@ -590,6 +591,7 @@ static struct usb_serial_driver keyspan_1port_device = {
 		.name		= "keyspan_1",
 	},
 	.description		= "Keyspan 1 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_1port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
@@ -617,6 +619,7 @@ static struct usb_serial_driver keyspan_2port_device = {
 		.name		= "keyspan_2",
 	},
 	.description		= "Keyspan 2 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_2port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
@@ -644,6 +647,7 @@ static struct usb_serial_driver keyspan_4port_device = {
 		.name		= "keyspan_4",
 	},
 	.description		= "Keyspan 4 port adapter",
+	.usb_driver		= &keyspan_driver,
 	.id_table		= keyspan_4port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= 5,

drivers/usb/serial/keyspan_pda.c

@@ -793,6 +793,7 @@ static struct usb_serial_driver keyspan_pda_fake_device = {
 		.name =		"keyspan_pda_pre",
 	},
 	.description =		"Keyspan PDA - (prerenumeration)",
+	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_fake,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -809,6 +810,7 @@ static struct usb_serial_driver xircom_pgs_fake_device = {
 		.name =		"xircom_no_firm",
 	},
 	.description =		"Xircom / Entregra PGS - (prerenumeration)",
+	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_fake_xircom,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -824,6 +826,7 @@ static struct usb_serial_driver keyspan_pda_device = {
 		.name =		"keyspan_pda",
 	},
 	.description =		"Keyspan PDA",
+	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_std,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		0,

drivers/usb/serial/kl5kusb105.c

@@ -124,6 +124,7 @@ static struct usb_serial_driver kl5kusb105d_device = {
 		.name =		"kl5kusb105d",
 	},
 	.description =	     "KL5KUSB105D / PalmConnect",
+	.usb_driver =	     &kl5kusb105d_driver,
 	.id_table =	     id_table,
 	.num_interrupt_in =  1,
 	.num_bulk_in =	     1,

drivers/usb/serial/kobil_sct.c

@@ -110,6 +110,7 @@ static struct usb_serial_driver kobil_device = {
 		.name =		"kobil",
 	},
 	.description =		"KOBIL USB smart card terminal",
+	.usb_driver = 		&kobil_driver,
 	.id_table =		id_table,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		0,

drivers/usb/serial/mct_u232.c

@@ -137,6 +137,7 @@ static struct usb_serial_driver mct_u232_device = {
 		.name =		"mct_u232",
 	},
 	.description =	     "MCT U232",
+	.usb_driver = 	     &mct_u232_driver,
 	.id_table =	     id_table_combined,
 	.num_interrupt_in =  2,
 	.num_bulk_in =	     0,

drivers/usb/serial/mos7720.c

@@ -1605,12 +1605,21 @@ static void mos7720_shutdown(struct usb_serial *serial)
 	usb_set_serial_data(serial, NULL);
 }
 
+static struct usb_driver usb_driver = {
+	.name =		"moschip7720",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	moschip_port_id_table,
+	.no_dynamic_id =	1,
+};
+
 static struct usb_serial_driver moschip7720_2port_driver = {
 	.driver = {
 		.owner =	THIS_MODULE,
 		.name =		"moschip7720",
 	},
 	.description		= "Moschip 2 port adapter",
+	.usb_driver		= &usb_driver,
 	.id_table		= moschip_port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 2,
@@ -1631,13 +1640,6 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.read_bulk_callback	= mos7720_bulk_in_callback,
 };
 
-static struct usb_driver usb_driver = {
-	.name =		"moschip7720",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	moschip_port_id_table,
-};
-
 static int __init moschip7720_init(void)
 {
 	int retval;

drivers/usb/serial/mos7840.c

@@ -2834,12 +2834,21 @@ static void mos7840_shutdown(struct usb_serial *serial)
 
 }
 
+static struct usb_driver io_driver = {
+	.name = "mos7840",
+	.probe = usb_serial_probe,
+	.disconnect = usb_serial_disconnect,
+	.id_table = moschip_id_table_combined,
+	.no_dynamic_id = 1,
+};
+
 static struct usb_serial_driver moschip7840_4port_device = {
 	.driver = {
 		   .owner = THIS_MODULE,
 		   .name = "mos7840",
 		   },
 	.description = DRIVER_DESC,
+	.usb_driver = &io_driver,
 	.id_table = moschip_port_id_table,
 	.num_interrupt_in = 1,	//NUM_DONT_CARE,//1,
 #ifdef check
@@ -2869,13 +2878,6 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.read_int_callback = mos7840_interrupt_callback,
 };
 
-static struct usb_driver io_driver = {
-	.name = "mos7840",
-	.probe = usb_serial_probe,
-	.disconnect = usb_serial_disconnect,
-	.id_table = moschip_id_table_combined,
-};
-
 /****************************************************************************
  * moschip7840_init
  *	This is called by the module subsystem, or on startup to initialize us

drivers/usb/serial/navman.c

@@ -119,6 +119,7 @@ static struct usb_serial_driver navman_device = {
 		.name =		"navman",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&navman_driver,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
 	.num_bulk_out =		NUM_DONT_CARE,

drivers/usb/serial/omninet.c

@@ -93,6 +93,7 @@ static struct usb_serial_driver zyxel_omninet_device = {
 		.name =		"omninet",
 	},
 	.description =		"ZyXEL - omni.net lcd plus usb",
+	.usb_driver =		&omninet_driver,
 	.id_table =		id_table,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,

drivers/usb/serial/option.c

@@ -135,6 +135,7 @@ static struct usb_serial_driver option_1port_device = {
 		.name =		"option1",
 	},
 	.description       = "GSM modem (1-port)",
+	.usb_driver        = &option_driver,
 	.id_table          = option_ids1,
 	.num_interrupt_in  = NUM_DONT_CARE,
 	.num_bulk_in       = NUM_DONT_CARE,

drivers/usb/serial/pl2303.c

@@ -1118,6 +1118,7 @@ static struct usb_serial_driver pl2303_device = {
 		.name =		"pl2303",
 	},
 	.id_table =		id_table,
+	.usb_driver = 		&pl2303_driver,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		1,
 	.num_bulk_out =		1,

drivers/usb/serial/safe_serial.c

@@ -402,6 +402,7 @@ static struct usb_serial_driver safe_device = {
 		.name =		"safe_serial",
 	},
 	.id_table =		id_table,
+	.usb_driver =		&safe_driver,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
 	.num_bulk_out =		NUM_DONT_CARE,

drivers/usb/serial/sierra.c

@@ -614,6 +614,7 @@ static struct usb_serial_driver sierra_1port_device = {
 	},
 	.description       = "Sierra USB modem (1 port)",
 	.id_table          = id_table_1port,
+	.usb_driver        = &sierra_driver,
 	.num_interrupt_in  = NUM_DONT_CARE,
 	.num_bulk_in       = 1,
 	.num_bulk_out      = 1,
@@ -642,6 +643,7 @@ static struct usb_serial_driver sierra_3port_device = {
 	},
 	.description       = "Sierra USB modem (3 port)",
 	.id_table          = id_table_3port,
+	.usb_driver        = &sierra_driver,
 	.num_interrupt_in  = NUM_DONT_CARE,
 	.num_bulk_in       = 3,
 	.num_bulk_out      = 3,

drivers/usb/serial/ti_usb_3410_5052.c

@@ -262,6 +262,7 @@ static struct usb_serial_driver ti_1port_device = {
 		.name		= "ti_usb_3410_5052_1",
 	},
 	.description		= "TI USB 3410 1 port adapter",
+	.usb_driver		= &ti_usb_driver,
 	.id_table		= ti_id_table_3410,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -292,6 +293,7 @@ static struct usb_serial_driver ti_2port_device = {
 		.name		= "ti_usb_3410_5052_2",
 	},
 	.description		= "TI USB 5052 2 port adapter",
+	.usb_driver		= &ti_usb_driver,
 	.id_table		= ti_id_table_5052,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 2,

drivers/usb/serial/visor.c

@@ -189,6 +189,7 @@ static struct usb_serial_driver handspring_device = {
 		.name =		"visor",
 	},
 	.description =		"Handspring Visor / Palm OS",
+	.usb_driver =		&visor_driver,
 	.id_table =		id_table,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		2,
@@ -219,6 +220,7 @@ static struct usb_serial_driver clie_5_device = {
 		.name =		"clie_5",
 	},
 	.description =		"Sony Clie 5.0",
+	.usb_driver =		&visor_driver,
 	.id_table =		clie_id_5_table,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		2,
@@ -249,6 +251,7 @@ static struct usb_serial_driver clie_3_5_device = {
 		.name =		"clie_3.5",
 	},
 	.description =		"Sony Clie 3.5",
+	.usb_driver =		&visor_driver,
 	.id_table =		clie_id_3_5_table,
 	.num_interrupt_in =	0,
 	.num_bulk_in =		1,

drivers/usb/serial/whiteheat.c

@@ -161,6 +161,7 @@ static struct usb_serial_driver whiteheat_fake_device = {
 		.name =		"whiteheatnofirm",
 	},
 	.description =		"Connect Tech - WhiteHEAT - (prerenumeration)",
+	.usb_driver =		&whiteheat_driver,
 	.id_table =		id_table_prerenumeration,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -176,6 +177,7 @@ static struct usb_serial_driver whiteheat_device = {
 		.name =		"whiteheat",
 	},
 	.description =		"Connect Tech - WhiteHEAT",
+	.usb_driver =		&whiteheat_driver,
 	.id_table =		id_table_std,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,