Skip to content

L
linux
Commit d9c12685 authored by Patrice Chotard's avatar Patrice Chotard
Browse files
Options

ARM: dts: STiH415-pinctrl: update gpio-cells to 2 

This patch allows to use second parameter to the gpio
specifier, which is used to specify whether the gpio is
active high or low.
Signed-off-by: default avatarPatrice Chotard <patrice.chotard@st.com>
parent ba5ba119
Show whitespace changes
Inline Side-by-side
Showing with 27 additions and 27 deletions
arch/arm/boot/dts/stih415-pinctrl.dtsi
View file @ d9c12685
......@@ -54,7 +54,7 @@ pin-controller-sbc {
pio0: gpio@fe610000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
......@@ -62,7 +62,7 @@ pio0: gpio@fe610000 {
};
pio1: gpio@fe611000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
......@@ -70,7 +70,7 @@ pio1: gpio@fe611000 {
};
pio2: gpio@fe612000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
......@@ -78,7 +78,7 @@ pio2: gpio@fe612000 {
};
pio3: gpio@fe613000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
......@@ -86,7 +86,7 @@ pio3: gpio@fe613000 {
};
pio4: gpio@fe614000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
......@@ -208,7 +208,7 @@ pin-controller-front {
pio5: gpio@fee00000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
......@@ -216,7 +216,7 @@ pio5: gpio@fee00000 {
};
pio6: gpio@fee01000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
......@@ -224,7 +224,7 @@ pio6: gpio@fee01000 {
};
pio7: gpio@fee02000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
......@@ -232,7 +232,7 @@ pio7: gpio@fee02000 {
};
pio8: gpio@fee03000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
......@@ -240,7 +240,7 @@ pio8: gpio@fee03000 {
};
pio9: gpio@fee04000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
......@@ -248,7 +248,7 @@ pio9: gpio@fee04000 {
};
pio10: gpio@fee05000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
......@@ -256,7 +256,7 @@ pio10: gpio@fee05000 {
};
pio11: gpio@fee06000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x6000 0x100>;
......@@ -264,7 +264,7 @@ pio11: gpio@fee06000 {
};
pio12: gpio@fee07000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x7000 0x100>;
......@@ -303,7 +303,7 @@ pin-controller-rear {
pio13: gpio@fe820000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
......@@ -311,7 +311,7 @@ pio13: gpio@fe820000 {
};
pio14: gpio@fe821000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
......@@ -319,7 +319,7 @@ pio14: gpio@fe821000 {
};
pio15: gpio@fe822000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
......@@ -327,7 +327,7 @@ pio15: gpio@fe822000 {
};
pio16: gpio@fe823000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
......@@ -335,7 +335,7 @@ pio16: gpio@fe823000 {
};
pio17: gpio@fe824000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
......@@ -343,7 +343,7 @@ pio17: gpio@fe824000 {
};
pio18: gpio@fe825000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
......@@ -465,7 +465,7 @@ pin-controller-left {
pio100: gpio@fd6b0000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
......@@ -473,7 +473,7 @@ pio100: gpio@fd6b0000 {
};
pio101: gpio@fd6b1000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
......@@ -481,7 +481,7 @@ pio101: gpio@fd6b1000 {
};
pio102: gpio@fd6b2000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
......@@ -502,7 +502,7 @@ pin-controller-right {
pio103: gpio@fd330000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x100>;
......@@ -510,7 +510,7 @@ pio103: gpio@fd330000 {
};
pio104: gpio@fd331000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x100>;
......@@ -518,7 +518,7 @@ pio104: gpio@fd331000 {
};
pio105: gpio@fd332000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x100>;
......@@ -526,7 +526,7 @@ pio105: gpio@fd332000 {
};
pio106: gpio@fd333000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x3000 0x100>;
......@@ -534,7 +534,7 @@ pio106: gpio@fd333000 {
};
pio107: gpio@fd334000 {
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x4000 0x100>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7