Merge branch 'selftests-mptcp-various-improvements'

Matthieu Baerts says:

====================
selftests: mptcp: various improvements

In this series from Geliang, there are various improvements in MPTCP
selftests: sharing code, doing actions the same way, colours, etc.

Patch 1 prints all error messages to stdout: what was done in almost all
other MPTCP selftests. This can be now easily changed later if needed.

Patch 2 makes sure the test counter is continuous in mptcp_connect.sh.

Patch 3 aligns the messages that are printed in mptcp_connect.sh.

Patch 4 prints each test results in mptcp_sockopt.sh, similar to what we
have in the TAP output.

Patch 5 moves the different test counters to a single one in
mptcp_lib.sh, to uniform how it is used.

Patch 6 moves how titles are printed from mptcp_join.sh to the lib, to
be reused in patch 7 by all other MPTCP selftests.

Patch 8 uses the '+=' operator to append strings instead of repeating
twice the variable name: that's shorter, easier to read.

Patch 9 adds colours for the [ OK ], [SKIP], [FAIL] and INFO keywords in
all MPTCP selftests.

Patch 10 to 12 are some preparation patches for patch 13: patch 10
modifies how some 'test_fail' helpers, patch 11 moves a helper from
userspace_pm.sh to the lib, and patch 12 changes where titles are
printed in userspace_pm.sh. Patch 13 moves some duplicated helpers from
mptcp_join.sh and userspace_pm.sh to mptcp_lib.sh.

Patch 14 moves duplicated read-only variables from mptcp_join.sh and
userspace_pm.sh to mptcp_lib.sh as well.

Patch 15 uses explicit variables instead of hard-coded numbers for the
exit status.
====================

Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-0-4f42c347b653@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tools/testing/selftests/net/mptcp/diag.sh

@@ -9,7 +9,6 @@
 . "$(dirname "${0}")/mptcp_lib.sh"
 
 ns=""
-test_cnt=1
 timeout_poll=30
 timeout_test=$((timeout_poll * 2 + 1))
 ret=0
@@ -55,21 +54,20 @@ __chk_nr()
 
 	nr=$(eval $command)
 
-	printf "%-50s" "$msg"
+	mptcp_lib_print_title "$msg"
 	if [ "$nr" != "$expected" ]; then
 		if [ "$nr" = "$skip" ] && ! mptcp_lib_expect_all_features; then
-			echo "[ skip ] Feature probably not supported"
+			mptcp_lib_pr_skip "Feature probably not supported"
 			mptcp_lib_result_skip "${msg}"
 		else
-			echo "[ fail ] expected $expected found $nr"
+			mptcp_lib_pr_fail "expected $expected found $nr"
 			mptcp_lib_result_fail "${msg}"
 			ret=${KSFT_FAIL}
 		fi
 	else
-		echo "[  ok  ]"
+		mptcp_lib_pr_ok
 		mptcp_lib_result_pass "${msg}"
 	fi
-	test_cnt=$((test_cnt+1))
 }
 
 __chk_msk_nr()
@@ -114,20 +112,19 @@ wait_msk_nr()
 		sleep 1
 	done
 
-	printf "%-50s" "$msg"
+	mptcp_lib_print_title "$msg"
 	if [ $i -ge $timeout ]; then
-		echo "[ fail ] timeout while expecting $expected max $max last $nr"
+		mptcp_lib_pr_fail "timeout while expecting $expected max $max last $nr"
 		mptcp_lib_result_fail "${msg} # timeout"
 		ret=${KSFT_FAIL}
 	elif [ $nr != $expected ]; then
-		echo "[ fail ] expected $expected found $nr"
+		mptcp_lib_pr_fail "expected $expected found $nr"
 		mptcp_lib_result_fail "${msg} # unexpected result"
 		ret=${KSFT_FAIL}
 	else
-		echo "[  ok  ]"
+		mptcp_lib_pr_ok
 		mptcp_lib_result_pass "${msg}"
 	fi
-	test_cnt=$((test_cnt+1))
 }
 
 chk_msk_fallback_nr()

tools/testing/selftests/net/mptcp/mptcp_connect.sh

@@ -33,6 +33,7 @@ do_tcp=0
 checksum=false
 filesize=0
 connect_per_transfer=1
+port=$((10000 - 1))
 
 if [ $tc_loss -eq 100 ];then
 	tc_loss=1%
@@ -64,14 +65,14 @@ while getopts "$optstring" option;do
 	case "$option" in
 	"h")
 		usage $0
-		exit 0
+		exit ${KSFT_PASS}
 		;;
 	"d")
 		if [ $OPTARG -ge 0 ];then
 			tc_delay="$OPTARG"
 		else
 			echo "-d requires numeric argument, got \"$OPTARG\"" 1>&2
-			exit 1
+			exit ${KSFT_FAIL}
 		fi
 		;;
 	"e")
@@ -95,7 +96,7 @@ while getopts "$optstring" option;do
 			sndbuf="$OPTARG"
 		else
 			echo "-S requires numeric argument, got \"$OPTARG\"" 1>&2
-			exit 1
+			exit ${KSFT_FAIL}
 		fi
 		;;
 	"R")
@@ -103,7 +104,7 @@ while getopts "$optstring" option;do
 			rcvbuf="$OPTARG"
 		else
 			echo "-R requires numeric argument, got \"$OPTARG\"" 1>&2
-			exit 1
+			exit ${KSFT_FAIL}
 		fi
 		;;
 	"m")
@@ -120,7 +121,7 @@ while getopts "$optstring" option;do
 		;;
 	"?")
 		usage $0
-		exit 1
+		exit ${KSFT_FAIL}
 		;;
 	esac
 done
@@ -130,7 +131,6 @@ ns2=""
 ns3=""
 ns4=""
 
-TEST_COUNT=0
 TEST_GROUP=""
 
 # This function is used in the cleanup trap
@@ -218,7 +218,7 @@ set_ethtool_flags() {
 	local flags="$3"
 
 	if ip netns exec $ns ethtool -K $dev $flags 2>/dev/null; then
-		echo "INFO: set $ns dev $dev: ethtool -K $flags"
+		mptcp_lib_pr_info "set $ns dev $dev: ethtool -K $flags"
 	fi
 }
 
@@ -247,16 +247,23 @@ else
 	set_ethtool_flags "$ns4" ns4eth3 "$ethtool_args"
 fi
 
+print_larger_title() {
+	# here we don't have the time, a bit longer for the alignment
+	MPTCP_LIB_TEST_FORMAT="%02u %-69s" \
+		mptcp_lib_print_title "${@}"
+}
+
 check_mptcp_disabled()
 {
 	local disabled_ns
 	mptcp_lib_ns_init disabled_ns
 
+	print_larger_title "New MPTCP socket can be blocked via sysctl"
 	# net.mptcp.enabled should be enabled by default
 	if [ "$(ip netns exec ${disabled_ns} sysctl net.mptcp.enabled | awk '{ print $3 }')" -ne 1 ]; then
-		echo -e "net.mptcp.enabled sysctl is not 1 by default\t\t[ FAIL ]"
+		mptcp_lib_pr_fail "net.mptcp.enabled sysctl is not 1 by default"
 		mptcp_lib_result_fail "net.mptcp.enabled sysctl is not 1 by default"
-		ret=1
+		ret=${KSFT_FAIL}
 		return 1
 	fi
 	ip netns exec ${disabled_ns} sysctl -q net.mptcp.enabled=0
@@ -267,13 +274,13 @@ check_mptcp_disabled()
 	mptcp_lib_ns_exit "${disabled_ns}"
 
 	if [ ${err} -eq 0 ]; then
-		echo -e "New MPTCP socket cannot be blocked via sysctl\t\t[ FAIL ]"
+		mptcp_lib_pr_fail "New MPTCP socket cannot be blocked via sysctl"
 		mptcp_lib_result_fail "New MPTCP socket cannot be blocked via sysctl"
-		ret=1
+		ret=${KSFT_FAIL}
 		return 1
 	fi
 
-	echo -e "New MPTCP socket can be blocked via sysctl\t\t[ OK ]"
+	mptcp_lib_pr_ok
 	mptcp_lib_result_pass "New MPTCP socket can be blocked via sysctl"
 	return 0
 }
@@ -294,8 +301,8 @@ do_ping()
 	ip netns exec ${connector_ns} ping ${ping_args} $connect_addr >/dev/null || rc=1
 
 	if [ $rc -ne 0 ] ; then
-		echo "$listener_ns -> $connect_addr connectivity [ FAIL ]" 1>&2
-		ret=1
+		mptcp_lib_pr_fail "$listener_ns -> $connect_addr connectivity"
+		ret=${KSFT_FAIL}
 
 		return 1
 	fi
@@ -313,24 +320,22 @@ do_transfer()
 	local local_addr="$6"
 	local extra_args="$7"
 
-	local port
-	port=$((10000+TEST_COUNT))
-	TEST_COUNT=$((TEST_COUNT+1))
+	port=$((port + 1))
 
 	if [ "$rcvbuf" -gt 0 ]; then
-		extra_args="$extra_args -R $rcvbuf"
+		extra_args+=" -R $rcvbuf"
 	fi
 
 	if [ "$sndbuf" -gt 0 ]; then
-		extra_args="$extra_args -S $sndbuf"
+		extra_args+=" -S $sndbuf"
 	fi
 
 	if [ -n "$testmode" ]; then
-		extra_args="$extra_args -m $testmode"
+		extra_args+=" -m $testmode"
 	fi
 
 	if [ -n "$extra_args" ] && $options_log; then
-		echo "INFO: extra options: $extra_args"
+		mptcp_lib_pr_info "extra options: $extra_args"
 	fi
 	options_log=false
 
@@ -342,7 +347,7 @@ do_transfer()
 	addr_port=$(printf "%s:%d" ${connect_addr} ${port})
 	local result_msg
 	result_msg="$(printf "%.3s %-5s -> %.3s (%-20s) %-5s" ${connector_ns} ${cl_proto} ${listener_ns} ${addr_port} ${srv_proto})"
-	printf "%s\t" "${result_msg}"
+	mptcp_lib_print_title "${result_msg}"
 
 	if $capture; then
 		local capuser
@@ -427,7 +432,7 @@ do_transfer()
 	result_msg+=" # time=${duration}ms"
 	printf "(duration %05sms) " "${duration}"
 	if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then
-		echo "[ FAIL ] client exit code $retc, server $rets" 1>&2
+		mptcp_lib_pr_fail "client exit code $retc, server $rets"
 		echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2
 		ip netns exec ${listener_ns} ss -Menita 1>&2 -o "sport = :$port"
 		cat /tmp/${listener_ns}.out
@@ -446,6 +451,7 @@ do_transfer()
 	mptcp_lib_check_transfer $cin $sout "file received by server"
 	rets=$?
 
+	local extra=""
 	local stat_synrx_now_l
 	local stat_ackrx_now_l
 	local stat_cookietx_now
@@ -469,17 +475,17 @@ do_transfer()
 	fi
 
 	if [ ${stat_synrx_now_l} -lt ${expect_synrx} ]; then
-		printf "[ FAIL ] lower MPC SYN rx (%d) than expected (%d)\n" \
-			"${stat_synrx_now_l}" "${expect_synrx}" 1>&2
+		mptcp_lib_pr_fail "lower MPC SYN rx (${stat_synrx_now_l})" \
+				  "than expected (${expect_synrx})"
 		retc=1
 	fi
 	if [ ${stat_ackrx_now_l} -lt ${expect_ackrx} ] && [ ${stat_ooo_now} -eq 0 ]; then
 		if [ ${stat_ooo_now} -eq 0 ]; then
-			printf "[ FAIL ] lower MPC ACK rx (%d) than expected (%d)\n" \
-				"${stat_ackrx_now_l}" "${expect_ackrx}" 1>&2
+			mptcp_lib_pr_fail "lower MPC ACK rx (${stat_ackrx_now_l})" \
+					  "than expected (${expect_ackrx})"
 			rets=1
 		else
-			printf "[ Note ] fallback due to TCP OoO"
+			extra+=" [ Note ] fallback due to TCP OoO"
 		fi
 	fi
 
@@ -491,50 +497,52 @@ do_transfer()
 
 		local csum_err_s_nr=$((csum_err_s - stat_csum_err_s))
 		if [ $csum_err_s_nr -gt 0 ]; then
-			printf "[ FAIL ]\nserver got %d data checksum error[s]" ${csum_err_s_nr}
+			mptcp_lib_pr_fail "server got ${csum_err_s_nr} data checksum error[s]"
 			rets=1
 		fi
 
 		local csum_err_c_nr=$((csum_err_c - stat_csum_err_c))
 		if [ $csum_err_c_nr -gt 0 ]; then
-			printf "[ FAIL ]\nclient got %d data checksum error[s]" ${csum_err_c_nr}
+			mptcp_lib_pr_fail "client got ${csum_err_c_nr} data checksum error[s]"
 			retc=1
 		fi
 	fi
 
-	if [ $retc -eq 0 ] && [ $rets -eq 0 ]; then
-		printf "[ OK ]"
-		mptcp_lib_result_pass "${TEST_GROUP}: ${result_msg}"
-	else
-		mptcp_lib_result_fail "${TEST_GROUP}: ${result_msg}"
-	fi
-
 	if [ $cookies -eq 2 ];then
 		if [ $stat_cookietx_last -ge $stat_cookietx_now ] ;then
-			printf " WARN: CookieSent: did not advance"
+			extra+=" WARN: CookieSent: did not advance"
 		fi
 		if [ $stat_cookierx_last -ge $stat_cookierx_now ] ;then
-			printf " WARN: CookieRecv: did not advance"
+			extra+=" WARN: CookieRecv: did not advance"
 		fi
 	else
 		if [ $stat_cookietx_last -ne $stat_cookietx_now ] ;then
-			printf " WARN: CookieSent: changed"
+			extra+=" WARN: CookieSent: changed"
 		fi
 		if [ $stat_cookierx_last -ne $stat_cookierx_now ] ;then
-			printf " WARN: CookieRecv: changed"
+			extra+=" WARN: CookieRecv: changed"
 		fi
 	fi
 
 	if [ ${stat_synrx_now_l} -gt ${expect_synrx} ]; then
-		printf " WARN: SYNRX: expect %d, got %d (probably retransmissions)" \
-			"${expect_synrx}" "${stat_synrx_now_l}"
+		extra+=" WARN: SYNRX: expect ${expect_synrx},"
+		extra+=" got ${stat_synrx_now_l} (probably retransmissions)"
 	fi
 	if [ ${stat_ackrx_now_l} -gt ${expect_ackrx} ]; then
-		printf " WARN: ACKRX: expect %d, got %d (probably retransmissions)" \
-			"${expect_ackrx}" "${stat_ackrx_now_l}"
+		extra+=" WARN: ACKRX: expect ${expect_ackrx},"
+		extra+=" got ${stat_ackrx_now_l} (probably retransmissions)"
+	fi
+
+	if [ $retc -eq 0 ] && [ $rets -eq 0 ]; then
+		mptcp_lib_pr_ok "${extra:1}"
+		mptcp_lib_result_pass "${TEST_GROUP}: ${result_msg}"
+	else
+		if [ -n "${extra}" ]; then
+			mptcp_lib_print_warn "${extra:1}"
+		fi
+		mptcp_lib_result_fail "${TEST_GROUP}: ${result_msg}"
 	fi
 
-	echo
 	cat "$capout"
 	[ $retc -eq 0 ] && [ $rets -eq 0 ]
 }
@@ -660,7 +668,7 @@ run_test_transparent()
 	# following function has been exported (T). Not great but better than
 	# checking for a specific kernel version.
 	if ! mptcp_lib_kallsyms_has "T __ip_sock_set_tos$"; then
-		echo "INFO: ${msg} not supported by the kernel: SKIP"
+		mptcp_lib_pr_skip "${msg} not supported by the kernel"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
 	fi
@@ -677,7 +685,7 @@ table inet mangle {
 }
 EOF
 	then
-		echo "SKIP: $msg, could not load nft ruleset"
+		mptcp_lib_pr_skip "$msg, could not load nft ruleset"
 		mptcp_lib_fail_if_expected_feature "nft rules"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
@@ -693,7 +701,7 @@ EOF
 
 	if ! ip -net "$listener_ns" $r6flag rule add fwmark 1 lookup 100; then
 		ip netns exec "$listener_ns" nft flush ruleset
-		echo "SKIP: $msg, ip $r6flag rule failed"
+		mptcp_lib_pr_skip "$msg, ip $r6flag rule failed"
 		mptcp_lib_fail_if_expected_feature "ip rule"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
@@ -702,15 +710,15 @@ EOF
 	if ! ip -net "$listener_ns" route add local $local_addr/0 dev lo table 100; then
 		ip netns exec "$listener_ns" nft flush ruleset
 		ip -net "$listener_ns" $r6flag rule del fwmark 1 lookup 100
-		echo "SKIP: $msg, ip route add local $local_addr failed"
+		mptcp_lib_pr_skip "$msg, ip route add local $local_addr failed"
 		mptcp_lib_fail_if_expected_feature "ip route"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
 	fi
 
-	echo "INFO: test $msg"
+	mptcp_lib_pr_info "test $msg"
 
-	TEST_COUNT=10000
+	port=$((20000 - 1))
 	local extra_args="-o TRANSPARENT"
 	do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP \
 		    ${connect_addr} ${local_addr} "${extra_args}"
@@ -721,12 +729,12 @@ EOF
 	ip -net "$listener_ns" route del local $local_addr/0 dev lo table 100
 
 	if [ $lret -ne 0 ]; then
-		echo "FAIL: $msg, mptcp connection error" 1>&2
+		mptcp_lib_pr_fail "$msg, mptcp connection error"
 		ret=$lret
 		return 1
 	fi
 
-	echo "PASS: $msg"
+	mptcp_lib_pr_info "$msg pass"
 	return 0
 }
 
@@ -735,7 +743,7 @@ run_tests_peekmode()
 	local peekmode="$1"
 
 	TEST_GROUP="peek mode: ${peekmode}"
-	echo "INFO: with peek mode: ${peekmode}"
+	mptcp_lib_pr_info "with peek mode: ${peekmode}"
 	run_tests_lo "$ns1" "$ns1" 10.0.1.1 1 "-P ${peekmode}"
 	run_tests_lo "$ns1" "$ns1" dead:beef:1::1 1 "-P ${peekmode}"
 }
@@ -745,12 +753,12 @@ run_tests_mptfo()
 	TEST_GROUP="MPTFO"
 
 	if ! mptcp_lib_kallsyms_has "mptcp_fastopen_"; then
-		echo "INFO: TFO not supported by the kernel: SKIP"
+		mptcp_lib_pr_skip "TFO not supported by the kernel"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
 	fi
 
-	echo "INFO: with MPTFO start"
+	mptcp_lib_pr_info "with MPTFO start"
 	ip netns exec "$ns1" sysctl -q net.ipv4.tcp_fastopen=2
 	ip netns exec "$ns2" sysctl -q net.ipv4.tcp_fastopen=1
 
@@ -762,7 +770,7 @@ run_tests_mptfo()
 
 	ip netns exec "$ns1" sysctl -q net.ipv4.tcp_fastopen=0
 	ip netns exec "$ns2" sysctl -q net.ipv4.tcp_fastopen=0
-	echo "INFO: with MPTFO end"
+	mptcp_lib_pr_info "with MPTFO end"
 }
 
 run_tests_disconnect()
@@ -773,7 +781,7 @@ run_tests_disconnect()
 	TEST_GROUP="full disconnect"
 
 	if ! mptcp_lib_kallsyms_has "mptcp_pm_data_reset$"; then
-		echo "INFO: Full disconnect not supported: SKIP"
+		mptcp_lib_pr_skip "Full disconnect not supported"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
 	fi
@@ -786,7 +794,7 @@ run_tests_disconnect()
 	cin_disconnect="$old_cin"
 	connect_per_transfer=3
 
-	echo "INFO: disconnect"
+	mptcp_lib_pr_info "disconnect"
 	run_tests_lo "$ns1" "$ns1" 10.0.1.1 1 "-I 3 -i $old_cin"
 	run_tests_lo "$ns1" "$ns1" dead:beef:1::1 1 "-I 3 -i $old_cin"
 
@@ -810,10 +818,10 @@ log_if_error()
 	local msg="$1"
 
 	if [ ${ret} -ne 0 ]; then
-		echo "FAIL: ${msg}" 1>&2
+		mptcp_lib_pr_fail "${msg}"
 
 		final_ret=${ret}
-		ret=0
+		ret=${KSFT_PASS}
 
 		return ${final_ret}
 	fi
@@ -835,7 +843,7 @@ check_mptcp_disabled
 
 stop_if_error "The kernel configuration is not valid for MPTCP"
 
-echo "INFO: validating network environment with pings"
+print_larger_title "Validating network environment with pings"
 for sender in "$ns1" "$ns2" "$ns3" "$ns4";do
 	do_ping "$ns1" $sender 10.0.1.1
 	do_ping "$ns1" $sender dead:beef:1::1
@@ -857,10 +865,11 @@ done
 mptcp_lib_result_code "${ret}" "ping tests"
 
 stop_if_error "Could not even run ping tests"
+mptcp_lib_pr_ok
 
 [ -n "$tc_loss" ] && tc -net "$ns2" qdisc add dev ns2eth3 root netem loss random $tc_loss delay ${tc_delay}ms
-echo -n "INFO: Using loss of $tc_loss "
-test "$tc_delay" -gt 0 && echo -n "delay $tc_delay ms "
+tc_info="loss of $tc_loss "
+test "$tc_delay" -gt 0 && tc_info+="delay $tc_delay ms "
 
 reorder_delay=$((tc_delay / 4))
 
@@ -871,17 +880,17 @@ if [ -z "${tc_reorder}" ]; then
 
 	if [ $reorder_delay -gt 0 ] && [ $reorder1 -lt 100 ] && [ $reorder2 -gt 0 ]; then
 		tc_reorder="reorder ${reorder1}% ${reorder2}%"
-		echo -n "$tc_reorder with delay ${reorder_delay}ms "
+		tc_info+="$tc_reorder with delay ${reorder_delay}ms "
 	fi
 elif [ "$tc_reorder" = "0" ];then
 	tc_reorder=""
 elif [ "$reorder_delay" -gt 0 ];then
 	# reordering requires some delay
 	tc_reorder="reorder $tc_reorder"
-	echo -n "$tc_reorder with delay ${reorder_delay}ms "
+	tc_info+="$tc_reorder with delay ${reorder_delay}ms "
 fi
 
-echo "on ns3eth4"
+mptcp_lib_pr_info "Using ${tc_info}on ns3eth4"
 
 tc -net "$ns3" qdisc add dev ns3eth4 root netem delay ${reorder_delay}ms $tc_reorder
 

tools/testing/selftests/net/mptcp/mptcp_join.sh

@@ -25,7 +25,6 @@ err=""
 capout=""
 ns1=""
 ns2=""
-ksft_skip=4
 iptables="iptables"
 ip6tables="ip6tables"
 timeout_poll=30
@@ -48,7 +47,7 @@ declare -A all_tests
 declare -a only_tests_ids
 declare -a only_tests_names
 declare -A failed_tests
-TEST_COUNT=0
+MPTCP_LIB_TEST_FORMAT="%03u %s\n"
 TEST_NAME=""
 nr_blank=6
 
@@ -170,11 +169,6 @@ cleanup()
 	cleanup_partial
 }
 
-print_title()
-{
-	printf "%03u %s\n" "${TEST_COUNT}" "${TEST_NAME}"
-}
-
 print_check()
 {
 	printf "%-${nr_blank}s%-36s" " " "${*}"
@@ -190,17 +184,17 @@ print_info()
 
 print_ok()
 {
-	mptcp_lib_print_ok "[ ok ]${1:+ ${*}}"
+	mptcp_lib_pr_ok "${@}"
 }
 
 print_fail()
 {
-	mptcp_lib_print_err "[fail]${1:+ ${*}}"
+	mptcp_lib_pr_fail "${@}"
 }
 
 print_skip()
 {
-	mptcp_lib_print_warn "[skip]${1:+ ${*}}"
+	mptcp_lib_pr_skip "${@}"
 }
 
 # [ $1: fail msg ]
@@ -233,7 +227,7 @@ skip_test()
 
 	local i
 	for i in "${only_tests_ids[@]}"; do
-		if [ "${TEST_COUNT}" -eq "${i}" ]; then
+		if [ "$((MPTCP_LIB_TEST_COUNTER+1))" -eq "${i}" ]; then
 			return 1
 		fi
 	done
@@ -268,14 +262,13 @@ reset()
 
 	TEST_NAME="${1}"
 
-	TEST_COUNT=$((TEST_COUNT+1))
-
 	if skip_test; then
+		MPTCP_LIB_TEST_COUNTER=$((MPTCP_LIB_TEST_COUNTER+1))
 		last_test_ignored=1
 		return 1
 	fi
 
-	print_title
+	mptcp_lib_print_title "${TEST_NAME}"
 
 	if [ "${init}" != "1" ]; then
 		init
@@ -398,15 +391,15 @@ setup_fail_rules()
 		-p tcp \
 		-m length --length 150:9999 \
 		-m statistic --mode nth --packet 1 --every 99999 \
-		-j MARK --set-mark 42 || return ${ksft_skip}
+		-j MARK --set-mark 42 || return ${KSFT_SKIP}
 
-	tc -n $ns2 qdisc add dev ns2eth$i clsact || return ${ksft_skip}
+	tc -n $ns2 qdisc add dev ns2eth$i clsact || return ${KSFT_SKIP}
 	tc -n $ns2 filter add dev ns2eth$i egress \
 		protocol ip prio 1000 \
 		handle 42 fw \
 		action pedit munge offset 148 u8 invert \
 		pipe csum tcp \
-		index 100 || return ${ksft_skip}
+		index 100 || return ${KSFT_SKIP}
 }
 
 reset_with_fail()
@@ -420,7 +413,7 @@ reset_with_fail()
 	local rc=0
 	setup_fail_rules "${@}" || rc=$?
 
-	if [ ${rc} -eq ${ksft_skip} ]; then
+	if [ ${rc} -eq ${KSFT_SKIP} ]; then
 		mark_as_skipped "unable to set the 'fail' rules"
 		return 1
 	fi
@@ -456,13 +449,15 @@ reset_with_tcp_filter()
 # $1: err msg
 fail_test()
 {
-	ret=1
+	ret=${KSFT_FAIL}
 
-	print_fail "${@}"
+	if [ ${#} -gt 0 ]; then
+		print_fail "${@}"
+	fi
 
 	# just in case a test is marked twice as failed
 	if [ ${last_test_failed} -eq 0 ]; then
-		failed_tests[${TEST_COUNT}]="${TEST_NAME}"
+		failed_tests[${MPTCP_LIB_TEST_COUNTER}]="${TEST_NAME}"
 		dump_stats
 		last_test_failed=1
 	fi
@@ -760,18 +755,18 @@ pm_nl_check_endpoint()
 		line="${line% }"
 		# the dump order is: address id flags port dev
 		[ -n "$addr" ] && expected_line="$addr"
-		expected_line="$expected_line $id"
-		[ -n "$_flags" ] && expected_line="$expected_line ${_flags//","/" "}"
-		[ -n "$dev" ] && expected_line="$expected_line $dev"
-		[ -n "$port" ] && expected_line="$expected_line $port"
+		expected_line+=" $id"
+		[ -n "$_flags" ] && expected_line+=" ${_flags//","/" "}"
+		[ -n "$dev" ] && expected_line+=" $dev"
+		[ -n "$port" ] && expected_line+=" $port"
 	else
 		line=$(ip netns exec $ns ./pm_nl_ctl get $_id)
 		# the dump order is: id flags dev address port
 		expected_line="$id"
-		[ -n "$flags" ] && expected_line="$expected_line $flags"
-		[ -n "$dev" ] && expected_line="$expected_line $dev"
-		[ -n "$addr" ] && expected_line="$expected_line $addr"
-		[ -n "$_port" ] && expected_line="$expected_line $_port"
+		[ -n "$flags" ] && expected_line+=" $flags"
+		[ -n "$dev" ] && expected_line+=" $dev"
+		[ -n "$addr" ] && expected_line+=" $addr"
+		[ -n "$_port" ] && expected_line+=" $_port"
 	fi
 	if [ "$line" = "$expected_line" ]; then
 		print_ok
@@ -973,7 +968,7 @@ do_transfer()
 	local srv_proto="$4"
 	local connect_addr="$5"
 
-	local port=$((10000 + TEST_COUNT - 1))
+	local port=$((10000 + MPTCP_LIB_TEST_COUNTER - 1))
 	local cappid
 	local FAILING_LINKS=${FAILING_LINKS:-""}
 	local fastclose=${fastclose:-""}
@@ -991,9 +986,9 @@ do_transfer()
 			capuser="-Z $SUDO_USER"
 		fi
 
-		capfile=$(printf "mp_join-%02u-%s.pcap" "$TEST_COUNT" "${listener_ns}")
+		capfile=$(printf "mp_join-%02u-%s.pcap" "$MPTCP_LIB_TEST_COUNTER" "${listener_ns}")
 
-		echo "Capturing traffic for test $TEST_COUNT into $capfile"
+		echo "Capturing traffic for test $MPTCP_LIB_TEST_COUNTER into $capfile"
 		ip netns exec ${listener_ns} tcpdump -i any -s 65535 -B 32768 $capuser -w $capfile > "$capout" 2>&1 &
 		cappid=$!
 
@@ -1222,7 +1217,7 @@ chk_csum_nr()
 	print_check "sum"
 	count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtDataCsumErr")
 	if [ "$count" != "$csum_ns1" ]; then
-		extra_msg="$extra_msg ns1=$count"
+		extra_msg+=" ns1=$count"
 	fi
 	if [ -z "$count" ]; then
 		print_skip
@@ -1235,7 +1230,7 @@ chk_csum_nr()
 	print_check "csum"
 	count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtDataCsumErr")
 	if [ "$count" != "$csum_ns2" ]; then
-		extra_msg="$extra_msg ns2=$count"
+		extra_msg+=" ns2=$count"
 	fi
 	if [ -z "$count" ]; then
 		print_skip
@@ -1279,7 +1274,7 @@ chk_fail_nr()
 	print_check "ftx"
 	count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFailTx")
 	if [ "$count" != "$fail_tx" ]; then
-		extra_msg="$extra_msg,tx=$count"
+		extra_msg+=",tx=$count"
 	fi
 	if [ -z "$count" ]; then
 		print_skip
@@ -1293,7 +1288,7 @@ chk_fail_nr()
 	print_check "failrx"
 	count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFailRx")
 	if [ "$count" != "$fail_rx" ]; then
-		extra_msg="$extra_msg,rx=$count"
+		extra_msg+=",rx=$count"
 	fi
 	if [ -z "$count" ]; then
 		print_skip
@@ -1328,7 +1323,7 @@ chk_fclose_nr()
 	if [ -z "$count" ]; then
 		print_skip
 	elif [ "$count" != "$fclose_tx" ]; then
-		extra_msg="$extra_msg,tx=$count"
+		extra_msg+=",tx=$count"
 		fail_test "got $count MP_FASTCLOSE[s] TX expected $fclose_tx"
 	else
 		print_ok
@@ -1339,7 +1334,7 @@ chk_fclose_nr()
 	if [ -z "$count" ]; then
 		print_skip
 	elif [ "$count" != "$fclose_rx" ]; then
-		extra_msg="$extra_msg,rx=$count"
+		extra_msg+=",rx=$count"
 		fail_test "got $count MP_FASTCLOSE[s] RX expected $fclose_rx"
 	else
 		print_ok
@@ -1708,7 +1703,7 @@ chk_rm_nr()
 		count=$((count + cnt))
 		if [ "$count" != "$rm_subflow_nr" ]; then
 			suffix="$count in [$rm_subflow_nr:$((rm_subflow_nr*2))]"
-			extra_msg="$extra_msg simult"
+			extra_msg+=" simult"
 		fi
 		if [ $count -ge "$rm_subflow_nr" ] && \
 		   [ "$count" -le "$((rm_subflow_nr *2 ))" ]; then
@@ -2789,29 +2784,16 @@ backup_tests()
 	fi
 }
 
-SUB_ESTABLISHED=10 # MPTCP_EVENT_SUB_ESTABLISHED
-LISTENER_CREATED=15 #MPTCP_EVENT_LISTENER_CREATED
-LISTENER_CLOSED=16  #MPTCP_EVENT_LISTENER_CLOSED
-
-AF_INET=2
-AF_INET6=10
-
 verify_listener_events()
 {
-	local evt=$1
 	local e_type=$2
-	local e_family=$3
 	local e_saddr=$4
 	local e_sport=$5
-	local type
-	local family
-	local saddr
-	local sport
 	local name
 
-	if [ $e_type = $LISTENER_CREATED ]; then
+	if [ $e_type = $MPTCP_LIB_EVENT_LISTENER_CREATED ]; then
 		name="LISTENER_CREATED"
-	elif [ $e_type = $LISTENER_CLOSED ]; then
+	elif [ $e_type = $MPTCP_LIB_EVENT_LISTENER_CLOSED ]; then
 		name="LISTENER_CLOSED "
 	else
 		name="$e_type"
@@ -2824,23 +2806,11 @@ verify_listener_events()
 		return
 	fi
 
-	type=$(mptcp_lib_evts_get_info type "$evt" "$e_type")
-	family=$(mptcp_lib_evts_get_info family "$evt" "$e_type")
-	sport=$(mptcp_lib_evts_get_info sport "$evt" "$e_type")
-	if [ $family ] && [ $family = $AF_INET6 ]; then
-		saddr=$(mptcp_lib_evts_get_info saddr6 "$evt" "$e_type")
-	else
-		saddr=$(mptcp_lib_evts_get_info saddr4 "$evt" "$e_type")
-	fi
-
-	if [ $type ] && [ $type = $e_type ] &&
-	   [ $family ] && [ $family = $e_family ] &&
-	   [ $saddr ] && [ $saddr = $e_saddr ] &&
-	   [ $sport ] && [ $sport = $e_sport ]; then
+	if mptcp_lib_verify_listener_events "${@}"; then
 		print_ok
 		return 0
 	fi
-	fail_test "$e_type:$type $e_family:$family $e_saddr:$saddr $e_sport:$sport"
+	fail_test
 }
 
 add_addr_ports_tests()
@@ -2878,8 +2848,10 @@ add_addr_ports_tests()
 		chk_add_nr 1 1 1
 		chk_rm_nr 1 1 invert
 
-		verify_listener_events $evts_ns1 $LISTENER_CREATED $AF_INET 10.0.2.1 10100
-		verify_listener_events $evts_ns1 $LISTENER_CLOSED $AF_INET 10.0.2.1 10100
+		verify_listener_events $evts_ns1 $MPTCP_LIB_EVENT_LISTENER_CREATED \
+				       $MPTCP_LIB_AF_INET 10.0.2.1 10100
+		verify_listener_events $evts_ns1 $MPTCP_LIB_EVENT_LISTENER_CLOSED \
+				       $MPTCP_LIB_AF_INET 10.0.2.1 10100
 		kill_events_pids
 	fi
 
@@ -3485,11 +3457,11 @@ userspace_tests()
 		userspace_pm_chk_get_addr "${ns1}" "10" "id 10 flags signal 10.0.2.1"
 		userspace_pm_chk_get_addr "${ns1}" "20" "id 20 flags signal 10.0.3.1"
 		userspace_pm_rm_addr $ns1 10
-		userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $SUB_ESTABLISHED
+		userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $MPTCP_LIB_EVENT_SUB_ESTABLISHED
 		userspace_pm_chk_dump_addr "${ns1}" \
 			"id 20 flags signal 10.0.3.1" "after rm_addr 10"
 		userspace_pm_rm_addr $ns1 20
-		userspace_pm_rm_sf $ns1 10.0.3.1 $SUB_ESTABLISHED
+		userspace_pm_rm_sf $ns1 10.0.3.1 $MPTCP_LIB_EVENT_SUB_ESTABLISHED
 		userspace_pm_chk_dump_addr "${ns1}" "" "after rm_addr 20"
 		chk_rm_nr 2 2 invert
 		chk_mptcp_info subflows 0 subflows 0
@@ -3516,7 +3488,7 @@ userspace_tests()
 			"subflow"
 		userspace_pm_chk_get_addr "${ns2}" "20" "id 20 flags subflow 10.0.3.2"
 		userspace_pm_rm_addr $ns2 20
-		userspace_pm_rm_sf $ns2 10.0.3.2 $SUB_ESTABLISHED
+		userspace_pm_rm_sf $ns2 10.0.3.2 $MPTCP_LIB_EVENT_SUB_ESTABLISHED
 		userspace_pm_chk_dump_addr "${ns2}" \
 			"" \
 			"after rm_addr 20"
@@ -3659,7 +3631,7 @@ usage()
 {
 	if [ -n "${1}" ]; then
 		echo "${1}"
-		ret=1
+		ret=${KSFT_FAIL}
 	fi
 
 	echo "mptcp_join usage:"

tools/testing/selftests/net/mptcp/mptcp_lib.sh

@@ -8,8 +8,21 @@ readonly KSFT_SKIP=4
 # shellcheck disable=SC2155 # declare and assign separately
 readonly KSFT_TEST="${MPTCP_LIB_KSFT_TEST:-$(basename "${0}" .sh)}"
 
+# These variables are used in some selftests, read-only
+declare -rx MPTCP_LIB_EVENT_ANNOUNCED=6         # MPTCP_EVENT_ANNOUNCED
+declare -rx MPTCP_LIB_EVENT_REMOVED=7           # MPTCP_EVENT_REMOVED
+declare -rx MPTCP_LIB_EVENT_SUB_ESTABLISHED=10  # MPTCP_EVENT_SUB_ESTABLISHED
+declare -rx MPTCP_LIB_EVENT_SUB_CLOSED=11       # MPTCP_EVENT_SUB_CLOSED
+declare -rx MPTCP_LIB_EVENT_LISTENER_CREATED=15 # MPTCP_EVENT_LISTENER_CREATED
+declare -rx MPTCP_LIB_EVENT_LISTENER_CLOSED=16  # MPTCP_EVENT_LISTENER_CLOSED
+
+declare -rx MPTCP_LIB_AF_INET=2
+declare -rx MPTCP_LIB_AF_INET6=10
+
 MPTCP_LIB_SUBTESTS=()
 MPTCP_LIB_SUBTESTS_DUPLICATED=0
+MPTCP_LIB_TEST_COUNTER=0
+MPTCP_LIB_TEST_FORMAT="%02u %-50s"
 
 # only if supported (or forced) and not disabled, see no-color.org
 if { [ -t 1 ] || [ "${SELFTESTS_MPTCP_LIB_COLOR_FORCE:-}" = "1" ]; } &&
@@ -48,6 +61,23 @@ mptcp_lib_print_err() {
 	mptcp_lib_print_color "${MPTCP_LIB_COLOR_RED}${*}"
 }
 
+# shellcheck disable=SC2120 # parameters are optional
+mptcp_lib_pr_ok() {
+	mptcp_lib_print_ok "[ OK ]${1:+ ${*}}"
+}
+
+mptcp_lib_pr_skip() {
+	mptcp_lib_print_warn "[SKIP]${1:+ ${*}}"
+}
+
+mptcp_lib_pr_fail() {
+	mptcp_lib_print_err "[FAIL]${1:+ ${*}}"
+}
+
+mptcp_lib_pr_info() {
+	mptcp_lib_print_info "INFO: ${*}"
+}
+
 # SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var can be set when validating all
 # features using the last version of the kernel and the selftests to make sure
 # a test is not being skipped by mistake.
@@ -78,14 +108,14 @@ mptcp_lib_has_file() {
 
 mptcp_lib_check_mptcp() {
 	if ! mptcp_lib_has_file "/proc/sys/net/mptcp/enabled"; then
-		echo "SKIP: MPTCP support is not available"
+		mptcp_lib_pr_skip "MPTCP support is not available"
 		exit ${KSFT_SKIP}
 	fi
 }
 
 mptcp_lib_check_kallsyms() {
 	if ! mptcp_lib_has_file "/proc/kallsyms"; then
-		echo "SKIP: CONFIG_KALLSYMS is missing"
+		mptcp_lib_pr_skip "CONFIG_KALLSYMS is missing"
 		exit ${KSFT_SKIP}
 	fi
 }
@@ -292,7 +322,7 @@ mptcp_lib_check_transfer() {
 	local what="${3}"
 
 	if ! cmp "$in" "$out" > /dev/null 2>&1; then
-		echo "[ FAIL ] $what does not match (in, out):"
+		mptcp_lib_pr_fail "$what does not match (in, out):"
 		mptcp_lib_print_file_err "$in"
 		mptcp_lib_print_file_err "$out"
 
@@ -332,13 +362,13 @@ mptcp_lib_check_output() {
 	fi
 
 	if [ ${cmd_ret} -ne 0 ]; then
-		mptcp_lib_print_err "[FAIL] command execution '${cmd}' stderr"
+		mptcp_lib_pr_fail "command execution '${cmd}' stderr"
 		cat "${err}"
 		return 2
 	elif [ "${out}" = "${expected}" ]; then
 		return 0
 	else
-		mptcp_lib_print_err "[FAIL] expected '${expected}' got '${out}'"
+		mptcp_lib_pr_fail "expected '${expected}' got '${out}'"
 		return 1
 	fi
 }
@@ -350,29 +380,30 @@ mptcp_lib_check_tools() {
 		case "${tool}" in
 		"ip")
 			if ! ip -Version &> /dev/null; then
-				mptcp_lib_print_warn "SKIP: Could not run test without ip tool"
+				mptcp_lib_pr_skip "Could not run test without ip tool"
 				exit ${KSFT_SKIP}
 			fi
 			;;
 		"ss")
 			if ! ss -h | grep -q MPTCP; then
-				mptcp_lib_print_warn "SKIP: ss tool does not support MPTCP"
+				mptcp_lib_pr_skip "ss tool does not support MPTCP"
 				exit ${KSFT_SKIP}
 			fi
 			;;
 		"iptables"* | "ip6tables"*)
 			if ! "${tool}" -V &> /dev/null; then
-				mptcp_lib_print_warn "SKIP: Could not run all tests without ${tool}"
+				mptcp_lib_pr_skip "Could not run all tests without ${tool}"
 				exit ${KSFT_SKIP}
 			fi
 			;;
 		*)
-			mptcp_lib_print_err "Internal error: unsupported tool: ${tool}"
+			mptcp_lib_pr_fail "Internal error: unsupported tool: ${tool}"
 			exit ${KSFT_FAIL}
 			;;
 		esac
 	done
 }
+
 mptcp_lib_ns_init() {
 	local sec rndh
 
@@ -410,3 +441,67 @@ mptcp_lib_events() {
 	ip netns exec "${ns}" ./pm_nl_ctl events >> "${evts}" 2>&1 &
 	pid=$!
 }
+
+mptcp_lib_print_title() {
+	: "${MPTCP_LIB_TEST_COUNTER:?}"
+	: "${MPTCP_LIB_TEST_FORMAT:?}"
+
+	# shellcheck disable=SC2059 # the format is in a variable
+	printf "${MPTCP_LIB_TEST_FORMAT}" "$((++MPTCP_LIB_TEST_COUNTER))" "${*}"
+}
+
+# $1: var name ; $2: prev ret
+mptcp_lib_check_expected_one() {
+	local var="${1}"
+	local exp="e_${var}"
+	local prev_ret="${2}"
+
+	if [ "${!var}" = "${!exp}" ]; then
+		return 0
+	fi
+
+	if [ "${prev_ret}" = "0" ]; then
+		mptcp_lib_pr_fail
+	fi
+
+	mptcp_lib_print_err "Expected value for '${var}': '${!exp}', got '${!var}'."
+	return 1
+}
+
+# $@: all var names to check
+mptcp_lib_check_expected() {
+	local rc=0
+	local var
+
+	for var in "${@}"; do
+		mptcp_lib_check_expected_one "${var}" "${rc}" || rc=1
+	done
+
+	return "${rc}"
+}
+
+# shellcheck disable=SC2034 # Some variables are used below but indirectly
+mptcp_lib_verify_listener_events() {
+	local evt=${1}
+	local e_type=${2}
+	local e_family=${3}
+	local e_saddr=${4}
+	local e_sport=${5}
+	local type
+	local family
+	local saddr
+	local sport
+	local rc=0
+
+	type=$(mptcp_lib_evts_get_info type "${evt}" "${e_type}")
+	family=$(mptcp_lib_evts_get_info family "${evt}" "${e_type}")
+	if [ "${family}" ] && [ "${family}" = "${AF_INET6}" ]; then
+		saddr=$(mptcp_lib_evts_get_info saddr6 "${evt}" "${e_type}")
+	else
+		saddr=$(mptcp_lib_evts_get_info saddr4 "${evt}" "${e_type}")
+	fi
+	sport=$(mptcp_lib_evts_get_info sport "${evt}" "${e_type}")
+
+	mptcp_lib_check_expected "type" "family" "saddr" "sport" || rc="${?}"
+	return "${rc}"
+}

tools/testing/selftests/net/mptcp/mptcp_sockopt.sh

@@ -103,8 +103,9 @@ check_mark()
 	local v
 	for v in $values; do
 		if [ $v -ne 0 ]; then
-			echo "FAIL: got $tables $values in ns $ns , not 0 - not all expected packets marked" 1>&2
-			ret=1
+			mptcp_lib_pr_fail "got $tables $values in ns $ns," \
+					  "not 0 - not all expected packets marked"
+			ret=${KSFT_FAIL}
 			return 1
 		fi
 	done
@@ -112,6 +113,11 @@ check_mark()
 	return 0
 }
 
+print_title()
+{
+	mptcp_lib_print_title "${@}"
+}
+
 do_transfer()
 {
 	local listener_ns="$1"
@@ -161,8 +167,9 @@ do_transfer()
 	wait $spid
 	local rets=$?
 
+	print_title "Transfer ${ip:2}"
 	if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then
-		echo " client exit code $retc, server $rets" 1>&2
+		mptcp_lib_pr_fail "client exit code $retc, server $rets"
 		echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2
 		ip netns exec ${listener_ns} ss -Menita 1>&2 -o "sport = :$port"
 
@@ -171,10 +178,17 @@ do_transfer()
 
 		mptcp_lib_result_fail "transfer ${ip}"
 
-		ret=1
+		ret=${KSFT_FAIL}
 		return 1
 	fi
+	if ! mptcp_lib_check_transfer $cin $sout "file received by server"; then
+		rets=1
+	else
+		mptcp_lib_pr_ok
+	fi
+	mptcp_lib_result_code "${rets}" "transfer ${ip}"
 
+	print_title "Mark ${ip:2}"
 	if [ $local_addr = "::" ];then
 		check_mark $listener_ns 6 || retc=1
 		check_mark $connector_ns 6 || retc=1
@@ -183,15 +197,13 @@ do_transfer()
 		check_mark $connector_ns 4 || retc=1
 	fi
 
-	mptcp_lib_check_transfer $cin $sout "file received by server"
-	rets=$?
-
 	mptcp_lib_result_code "${retc}" "mark ${ip}"
-	mptcp_lib_result_code "${rets}" "transfer ${ip}"
 
 	if [ $retc -eq 0 ] && [ $rets -eq 0 ];then
+		mptcp_lib_pr_ok
 		return 0
 	fi
+	mptcp_lib_pr_fail
 
 	return 1
 }
@@ -212,7 +224,7 @@ do_mptcp_sockopt_tests()
 	local lret=0
 
 	if ! mptcp_lib_kallsyms_has "mptcp_diag_fill_info$"; then
-		echo "INFO: MPTCP sockopt not supported: SKIP"
+		mptcp_lib_pr_skip "MPTCP sockopt not supported"
 		mptcp_lib_result_skip "sockopt"
 		return
 	fi
@@ -220,23 +232,27 @@ do_mptcp_sockopt_tests()
 	ip netns exec "$ns_sbox" ./mptcp_sockopt
 	lret=$?
 
+	print_title "SOL_MPTCP sockopt v4"
 	if [ $lret -ne 0 ]; then
-		echo "FAIL: SOL_MPTCP getsockopt" 1>&2
+		mptcp_lib_pr_fail
 		mptcp_lib_result_fail "sockopt v4"
 		ret=$lret
 		return
 	fi
+	mptcp_lib_pr_ok
 	mptcp_lib_result_pass "sockopt v4"
 
 	ip netns exec "$ns_sbox" ./mptcp_sockopt -6
 	lret=$?
 
+	print_title "SOL_MPTCP sockopt v6"
 	if [ $lret -ne 0 ]; then
-		echo "FAIL: SOL_MPTCP getsockopt (ipv6)" 1>&2
+		mptcp_lib_pr_fail
 		mptcp_lib_result_fail "sockopt v6"
 		ret=$lret
 		return
 	fi
+	mptcp_lib_pr_ok
 	mptcp_lib_result_pass "sockopt v6"
 }
 
@@ -259,16 +275,17 @@ run_tests()
 
 do_tcpinq_test()
 {
+	print_title "TCP_INQ cmsg/ioctl $*"
 	ip netns exec "$ns_sbox" ./mptcp_inq "$@"
 	local lret=$?
 	if [ $lret -ne 0 ];then
 		ret=$lret
-		echo "FAIL: mptcp_inq $*" 1>&2
+		mptcp_lib_pr_fail
 		mptcp_lib_result_fail "TCP_INQ: $*"
 		return $lret
 	fi
 
-	echo "PASS: TCP_INQ cmsg/ioctl $*"
+	mptcp_lib_pr_ok
 	mptcp_lib_result_pass "TCP_INQ: $*"
 	return $lret
 }
@@ -278,7 +295,7 @@ do_tcpinq_tests()
 	local lret=0
 
 	if ! mptcp_lib_kallsyms_has "mptcp_ioctl$"; then
-		echo "INFO: TCP_INQ not supported: SKIP"
+		mptcp_lib_pr_skip "TCP_INQ not supported"
 		mptcp_lib_result_skip "TCP_INQ"
 		return
 	fi
@@ -314,15 +331,7 @@ trap cleanup EXIT
 run_tests $ns1 $ns2 10.0.1.1
 run_tests $ns1 $ns2 dead:beef:1::1
 
-if [ $ret -eq 0 ];then
-	echo "PASS: all packets had packet mark set"
-fi
-
 do_mptcp_sockopt_tests
-if [ $ret -eq 0 ];then
-	echo "PASS: SOL_MPTCP getsockopt has expected information"
-fi
-
 do_tcpinq_tests
 
 mptcp_lib_result_print_all_tap

tools/testing/selftests/net/mptcp/pm_netlink.sh

@@ -19,11 +19,11 @@ while getopts "$optstring" option;do
 	case "$option" in
 	"h")
 		usage $0
-		exit 0
+		exit ${KSFT_PASS}
 		;;
 	"?")
 		usage $0
-		exit 1
+		exit ${KSFT_FAIL}
 		;;
 	esac
 done
@@ -53,17 +53,17 @@ check()
 	local msg="$3"
 	local rc=0
 
-	printf "%-50s" "$msg"
+	mptcp_lib_print_title "$msg"
 	mptcp_lib_check_output "${err}" "${cmd}" "${expected}" || rc=${?}
 	if [ ${rc} -eq 2 ]; then
 		mptcp_lib_result_fail "${msg} # error ${rc}"
-		ret=1
+		ret=${KSFT_FAIL}
 	elif [ ${rc} -eq 0 ]; then
 		mptcp_lib_print_ok "[ OK ]"
 		mptcp_lib_result_pass "${msg}"
 	elif [ ${rc} -eq 1 ]; then
 		mptcp_lib_result_fail "${msg} # different output"
-		ret=1
+		ret=${KSFT_FAIL}
 	fi
 }
 
@@ -189,7 +189,8 @@ subflow,backup,fullmesh 10.0.1.1" "          (backup,fullmesh)"
 else
 	for st in fullmesh nofullmesh backup,fullmesh; do
 		st="          (${st})"
-		printf "%-50s%s\n" "${st}" "[SKIP]"
+		mptcp_lib_print_title "${st}"
+		mptcp_lib_pr_skip
 		mptcp_lib_result_skip "${st}"
 	done
 fi

tools/testing/selftests/net/mptcp/simult_flows.sh

@@ -14,7 +14,8 @@ ns3=""
 capture=false
 timeout_poll=30
 timeout_test=$((timeout_poll * 2 + 1))
-test_cnt=1
+# a bit more space: because we have more to display
+MPTCP_LIB_TEST_FORMAT="%02u %-60s"
 ret=0
 bail=0
 slack=50
@@ -126,8 +127,7 @@ do_transfer()
 	local sin=$2
 	local max_time=$3
 	local port
-	port=$((10000+test_cnt))
-	test_cnt=$((test_cnt+1))
+	port=$((10000+MPTCP_LIB_TEST_COUNTER))
 
 	:> "$cout"
 	:> "$sout"
@@ -187,12 +187,12 @@ do_transfer()
 	printf "%-16s" " max $max_time "
 	if [ $retc -eq 0 ] && [ $rets -eq 0 ] && \
 	   [ $cmpc -eq 0 ] && [ $cmps -eq 0 ]; then
-		echo "[ OK ]"
+		mptcp_lib_pr_ok
 		cat "$capout"
 		return 0
 	fi
 
-	echo " [ fail ]"
+	mptcp_lib_pr_fail
 	echo "client exit code $retc, server $rets" 1>&2
 	echo -e "\nnetns ${ns3} socket stat for $port:" 1>&2
 	ip netns exec ${ns3} ss -nita 1>&2 -o "sport = :$port"
@@ -239,7 +239,7 @@ run_test()
 	# completion (see mptcp_connect): 200ms on each side, add some slack
 	time=$((time + 400 + slack))
 
-	printf "%-60s" "$msg"
+	mptcp_lib_print_title "$msg"
 	do_transfer $small $large $time
 	lret=$?
 	mptcp_lib_result_code "${lret}" "${msg}"
@@ -249,7 +249,7 @@ run_test()
 	fi
 
 	msg+=" - reverse direction"
-	printf "%-60s" "${msg}"
+	mptcp_lib_print_title "${msg}"
 	do_transfer $large $small $time
 	lret=$?
 	mptcp_lib_result_code "${lret}" "${msg}"
@@ -263,7 +263,7 @@ while getopts "bcdh" option;do
 	case "$option" in
 	"h")
 		usage $0
-		exit 0
+		exit ${KSFT_PASS}
 		;;
 	"b")
 		bail=1
@@ -276,7 +276,7 @@ while getopts "bcdh" option;do
 		;;
 	"?")
 		usage $0
-		exit 1
+		exit ${KSFT_FAIL}
 		;;
 	esac
 done

tools/testing/selftests/net/mptcp/userspace_pm.sh

@@ -5,7 +5,7 @@
 # code but we accept it.
 #shellcheck disable=SC2086
 
-# Some variables are used below but indirectly, see check_expected_one()
+# Some variables are used below but indirectly, see verify_*_event()
 #shellcheck disable=SC2034
 
 . "$(dirname "${0}")/mptcp_lib.sh"
@@ -19,15 +19,15 @@ if ! mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 fi
 mptcp_lib_check_tools ip
 
-ANNOUNCED=6        # MPTCP_EVENT_ANNOUNCED
-REMOVED=7          # MPTCP_EVENT_REMOVED
-SUB_ESTABLISHED=10 # MPTCP_EVENT_SUB_ESTABLISHED
-SUB_CLOSED=11      # MPTCP_EVENT_SUB_CLOSED
-LISTENER_CREATED=15 #MPTCP_EVENT_LISTENER_CREATED
-LISTENER_CLOSED=16  #MPTCP_EVENT_LISTENER_CLOSED
+ANNOUNCED=${MPTCP_LIB_EVENT_ANNOUNCED}
+REMOVED=${MPTCP_LIB_EVENT_REMOVED}
+SUB_ESTABLISHED=${MPTCP_LIB_EVENT_SUB_ESTABLISHED}
+SUB_CLOSED=${MPTCP_LIB_EVENT_SUB_CLOSED}
+LISTENER_CREATED=${MPTCP_LIB_EVENT_LISTENER_CREATED}
+LISTENER_CLOSED=${MPTCP_LIB_EVENT_LISTENER_CLOSED}
 
-AF_INET=2
-AF_INET6=10
+AF_INET=${MPTCP_LIB_AF_INET}
+AF_INET6=${MPTCP_LIB_AF_INET6}
 
 file=""
 server_evts=""
@@ -54,14 +54,12 @@ ns1=""
 ns2=""
 ret=0
 test_name=""
-
-_printf() {
-	stdbuf -o0 -e0 printf "${@}"
-}
+# a bit more space: because we have more to display
+MPTCP_LIB_TEST_FORMAT="%02u %-68s"
 
 print_title()
 {
-	_printf "INFO: %s\n" "${1}"
+	mptcp_lib_pr_info "${1}"
 }
 
 # $1: test name
@@ -69,36 +67,29 @@ print_test()
 {
 	test_name="${1}"
 
-	_printf "%-68s" "${test_name}"
-}
-
-print_results()
-{
-	_printf "[%s]\n" "${1}"
+	mptcp_lib_print_title "${test_name}"
 }
 
 test_pass()
 {
-	print_results " OK "
+	mptcp_lib_pr_ok
 	mptcp_lib_result_pass "${test_name}"
 }
 
 test_skip()
 {
-	print_results "SKIP"
+	mptcp_lib_pr_skip
 	mptcp_lib_result_skip "${test_name}"
 }
 
 # $1: msg
 test_fail()
 {
-	print_results "FAIL"
-	ret=1
-
-	if [ -n "${1}" ]; then
-		_printf "\t%s\n" "${1}"
+	if [ ${#} -gt 0 ]
+	then
+		mptcp_lib_pr_fail "${@}"
 	fi
-
+	ret=${KSFT_FAIL}
 	mptcp_lib_result_fail "${test_name}"
 }
 
@@ -120,7 +111,7 @@ cleanup()
 
 	rm -rf $file $client_evts $server_evts
 
-	_printf "Done\n"
+	mptcp_lib_pr_info "Done"
 }
 
 trap cleanup EXIT
@@ -218,7 +209,7 @@ make_connection()
 	else
 		test_fail "Expected tokens (c:${client_token} - s:${server_token}) and server (c:${client_serverside} - s:${server_serverside})"
 		mptcp_lib_result_print_all_tap
-		exit 1
+		exit ${KSFT_FAIL}
 	fi
 
 	if [ "$is_v6" = "v6" ]
@@ -237,45 +228,16 @@ make_connection()
 	fi
 }
 
-# $1: var name ; $2: prev ret
-check_expected_one()
-{
-	local var="${1}"
-	local exp="e_${var}"
-	local prev_ret="${2}"
-
-	if [ "${!var}" = "${!exp}" ]
-	then
-		return 0
-	fi
-
-	if [ "${prev_ret}" = "0" ]
-	then
-		test_fail
-	fi
-
-	_printf "\tExpected value for '%s': '%s', got '%s'.\n" \
-		"${var}" "${!exp}" "${!var}"
-	return 1
-}
-
 # $@: all var names to check
 check_expected()
 {
-	local rc=0
-	local var
-
-	for var in "${@}"
-	do
-		check_expected_one "${var}" "${rc}" || rc=1
-	done
-
-	if [ ${rc} -eq 0 ]
+	if mptcp_lib_check_expected "${@}"
 	then
 		test_pass
 		return 0
 	fi
 
+	test_fail
 	return 1
 }
 
@@ -425,7 +387,7 @@ test_remove()
 	then
 		test_pass
 	else
-		test_fail
+		test_fail "unexpected type: ${type}"
 	fi
 
 	# RM_ADDR using an invalid addr id should result in no action
@@ -438,7 +400,7 @@ test_remove()
 	then
 		test_pass
 	else
-		test_fail
+		test_fail "unexpected type: ${type}"
 	fi
 
 	# RM_ADDR from the client to server machine
@@ -873,32 +835,11 @@ test_prio()
 
 verify_listener_events()
 {
-	local evt=$1
-	local e_type=$2
-	local e_family=$3
-	local e_saddr=$4
-	local e_sport=$5
-	local type
-	local family
-	local saddr
-	local sport
-
-	if [ $e_type = $LISTENER_CREATED ]; then
-		print_test "CREATE_LISTENER $e_saddr:$e_sport"
-	elif [ $e_type = $LISTENER_CLOSED ]; then
-		print_test "CLOSE_LISTENER $e_saddr:$e_sport"
-	fi
-
-	type=$(mptcp_lib_evts_get_info type $evt $e_type)
-	family=$(mptcp_lib_evts_get_info family $evt $e_type)
-	sport=$(mptcp_lib_evts_get_info sport $evt $e_type)
-	if [ $family ] && [ $family = $AF_INET6 ]; then
-		saddr=$(mptcp_lib_evts_get_info saddr6 $evt $e_type)
+	if mptcp_lib_verify_listener_events "${@}"; then
+		test_pass
 	else
-		saddr=$(mptcp_lib_evts_get_info saddr4 $evt $e_type)
+		test_fail
 	fi
-
-	check_expected "type" "family" "saddr" "sport"
 }
 
 test_listener()
@@ -920,6 +861,7 @@ test_listener()
 	local listener_pid=$!
 
 	sleep 0.5
+	print_test "CREATE_LISTENER 10.0.2.2:$client4_port"
 	verify_listener_events $client_evts $LISTENER_CREATED $AF_INET 10.0.2.2 $client4_port
 
 	# ADD_ADDR from client to server machine reusing the subflow port
@@ -936,6 +878,7 @@ test_listener()
 	mptcp_lib_kill_wait $listener_pid
 
 	sleep 0.5
+	print_test "CLOSE_LISTENER 10.0.2.2:$client4_port"
 	verify_listener_events $client_evts $LISTENER_CLOSED $AF_INET 10.0.2.2 $client4_port
 }