net: phy: Remove probe_capabilities

Deciding if to probe of PHYs using C45 is now determine by if the bus
provides the C45 read method. This makes probe_capabilities redundant
so remove it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

drivers/net/ethernet/adi/adin1110.c

@@ -523,7 +523,6 @@ static int adin1110_register_mdiobus(struct adin1110_priv *priv,
 	mii_bus->priv = priv;
 	mii_bus->parent = dev;
 	mii_bus->phy_mask = ~((u32)GENMASK(2, 0));
-	mii_bus->probe_capabilities = MDIOBUS_C22;
 	snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
 
 	ret = devm_mdiobus_register(dev, mii_bus);

drivers/net/ethernet/freescale/xgmac_mdio.c

@@ -397,7 +397,6 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
 	bus->read_c45 = xgmac_mdio_read_c45;
 	bus->write_c45 = xgmac_mdio_write_c45;
 	bus->parent = &pdev->dev;
-	bus->probe_capabilities = MDIOBUS_C22_C45;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%pa", &res->start);
 
 	priv = bus->priv;

drivers/net/ethernet/mediatek/mtk_eth_soc.c

@@ -814,7 +814,6 @@ static int mtk_mdio_init(struct mtk_eth *eth)
 	eth->mii_bus->write = mtk_mdio_write_c22;
 	eth->mii_bus->read_c45 = mtk_mdio_read_c45;
 	eth->mii_bus->write_c45 = mtk_mdio_write_c45;
-	eth->mii_bus->probe_capabilities = MDIOBUS_C22_C45;
 	eth->mii_bus->priv = eth;
 	eth->mii_bus->parent = eth->dev;
 

drivers/net/ethernet/microchip/lan743x_main.c

@@ -3302,7 +3302,6 @@ static int lan743x_mdiobus_init(struct lan743x_adapter *adapter)
 			lan743x_csr_write(adapter, SGMII_CTL, sgmii_ctl);
 			netif_dbg(adapter, drv, adapter->netdev,
 				  "SGMII operation\n");
-			adapter->mdiobus->probe_capabilities = MDIOBUS_C22_C45;
 			adapter->mdiobus->read = lan743x_mdiobus_read_c22;
 			adapter->mdiobus->write = lan743x_mdiobus_write_c22;
 			adapter->mdiobus->read_c45 = lan743x_mdiobus_read_c45;
@@ -3318,7 +3317,6 @@ static int lan743x_mdiobus_init(struct lan743x_adapter *adapter)
 			netif_dbg(adapter, drv, adapter->netdev,
 				  "RGMII operation\n");
 			// Only C22 support when RGMII I/F
-			adapter->mdiobus->probe_capabilities = MDIOBUS_C22;
 			adapter->mdiobus->read = lan743x_mdiobus_read_c22;
 			adapter->mdiobus->write = lan743x_mdiobus_write_c22;
 			adapter->mdiobus->name = "lan743x-mdiobus";

drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c

@@ -553,9 +553,6 @@ int stmmac_mdio_register(struct net_device *ndev)
 
 	new_bus->name = "stmmac";
 
-	if (priv->plat->has_gmac4)
-		new_bus->probe_capabilities = MDIOBUS_C22_C45;
-
 	if (priv->plat->has_xgmac) {
 		new_bus->read = &stmmac_xgmac2_mdio_read_c22;
 		new_bus->write = &stmmac_xgmac2_mdio_write_c22;

drivers/net/mdio/mdio-aspeed.c

@@ -164,7 +164,6 @@ static int aspeed_mdio_probe(struct platform_device *pdev)
 	bus->write = aspeed_mdio_write_c22;
 	bus->read_c45 = aspeed_mdio_read_c45;
 	bus->write_c45 = aspeed_mdio_write_c45;
-	bus->probe_capabilities = MDIOBUS_C22_C45;
 
 	rc = of_mdiobus_register(bus, pdev->dev.of_node);
 	if (rc) {

include/linux/phy.h

@@ -419,14 +419,6 @@ struct mii_bus {
 	/** @reset_gpiod: Reset GPIO descriptor pointer */
 	struct gpio_desc *reset_gpiod;
 
-	/** @probe_capabilities: bus capabilities, used for probing */
-	enum {
-		MDIOBUS_NO_CAP = 0,
-		MDIOBUS_C22,
-		MDIOBUS_C45,
-		MDIOBUS_C22_C45,
-	} probe_capabilities;
-
 	/** @shared_lock: protect access to the shared element */
 	struct mutex shared_lock;