Skip to content

L
linux
Commit da32baea authored by Douglas Gilbert's avatar Douglas Gilbert Committed by Martin K. Petersen
Browse files
Options

scsi: core: add scsi_io_completion_action helper 

Place scsi_io_completion()'s complex error processing associated with a
local enumeration into a static helper function. That enumeration's values
start with "ACTION_" so use the suffix "_action" in the helper function's
name.
Signed-off-by: default avatarDouglas Gilbert <dgilbert@interlog.com>
Reviewed-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: default avatarBart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent ab831084
Show whitespace changes
Inline Side-by-side
Showing with 175 additions and 154 deletions
drivers/scsi/scsi_lib.c
View file @ da32baea
......@@ -761,6 +761,172 @@ static blk_status_t scsi_result_to_blk_status(struct scsi_cmnd *cmd, int result)
}
}
/* Helper for scsi_io_completion() when special action required. */
static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result)
{
struct request_queue *q = cmd->device->request_queue;
struct request *req = cmd->request;
int level = 0;
enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY,
ACTION_DELAYED_RETRY} action;
unsigned long wait_for = (cmd->allowed + 1) * req->timeout;
struct scsi_sense_hdr sshdr;
bool sense_valid;
bool sense_current = true; /* false implies "deferred sense" */
blk_status_t blk_stat;
sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
if (sense_valid)
sense_current = !scsi_sense_is_deferred(&sshdr);
blk_stat = scsi_result_to_blk_status(cmd, result);
if (host_byte(result) == DID_RESET) {
/* Third party bus reset or reset for error recovery
* reasons. Just retry the command and see what
* happens.
*/
action = ACTION_RETRY;
} else if (sense_valid && sense_current) {
switch (sshdr.sense_key) {
case UNIT_ATTENTION:
if (cmd->device->removable) {
/* Detected disc change. Set a bit
* and quietly refuse further access.
*/
cmd->device->changed = 1;
action = ACTION_FAIL;
} else {
/* Must have been a power glitch, or a
* bus reset. Could not have been a
* media change, so we just retry the
* command and see what happens.
*/
action = ACTION_RETRY;
}
break;
case ILLEGAL_REQUEST:
/* If we had an ILLEGAL REQUEST returned, then
* we may have performed an unsupported
* command. The only thing this should be
* would be a ten byte read where only a six
* byte read was supported. Also, on a system
* where READ CAPACITY failed, we may have
* read past the end of the disk.
*/
if ((cmd->device->use_10_for_rw &&
sshdr.asc == 0x20 && sshdr.ascq == 0x00) &&
(cmd->cmnd[0] == READ_10 ||
cmd->cmnd[0] == WRITE_10)) {
/* This will issue a new 6-byte command. */
cmd->device->use_10_for_rw = 0;
action = ACTION_REPREP;
} else if (sshdr.asc == 0x10) /* DIX */ {
action = ACTION_FAIL;
blk_stat = BLK_STS_PROTECTION;
/* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
} else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
action = ACTION_FAIL;
blk_stat = BLK_STS_TARGET;
} else
action = ACTION_FAIL;
break;
case ABORTED_COMMAND:
action = ACTION_FAIL;
if (sshdr.asc == 0x10) /* DIF */
blk_stat = BLK_STS_PROTECTION;
break;
case NOT_READY:
/* If the device is in the process of becoming
* ready, or has a temporary blockage, retry.
*/
if (sshdr.asc == 0x04) {
switch (sshdr.ascq) {
case 0x01: /* becoming ready */
case 0x04: /* format in progress */
case 0x05: /* rebuild in progress */
case 0x06: /* recalculation in progress */
case 0x07: /* operation in progress */
case 0x08: /* Long write in progress */
case 0x09: /* self test in progress */
case 0x14: /* space allocation in progress */
case 0x1a: /* start stop unit in progress */
case 0x1b: /* sanitize in progress */
case 0x1d: /* configuration in progress */
case 0x24: /* depopulation in progress */
action = ACTION_DELAYED_RETRY;
break;
default:
action = ACTION_FAIL;
break;
}
} else
action = ACTION_FAIL;
break;
case VOLUME_OVERFLOW:
/* See SSC3rXX or current. */
action = ACTION_FAIL;
break;
default:
action = ACTION_FAIL;
break;
}
} else
action = ACTION_FAIL;
if (action != ACTION_FAIL &&
time_before(cmd->jiffies_at_alloc + wait_for, jiffies))
action = ACTION_FAIL;
switch (action) {
case ACTION_FAIL:
/* Give up and fail the remainder of the request */
if (!(req->rq_flags & RQF_QUIET)) {
static DEFINE_RATELIMIT_STATE(_rs,
DEFAULT_RATELIMIT_INTERVAL,
DEFAULT_RATELIMIT_BURST);
if (unlikely(scsi_logging_level))
level =
SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
SCSI_LOG_MLCOMPLETE_BITS);
/*
* if logging is enabled the failure will be printed
* in scsi_log_completion(), so avoid duplicate messages
*/
if (!level && __ratelimit(&_rs)) {
scsi_print_result(cmd, NULL, FAILED);
if (driver_byte(result) & DRIVER_SENSE)
scsi_print_sense(cmd);
scsi_print_command(cmd);
}
}
if (!scsi_end_request(req, blk_stat, blk_rq_err_bytes(req), 0))
return;
/*FALLTHRU*/
case ACTION_REPREP:
/* Unprep the request and put it back at the head of the queue.
* A new command will be prepared and issued.
*/
if (q->mq_ops) {
scsi_mq_requeue_cmd(cmd);
} else {
scsi_release_buffers(cmd);
scsi_requeue_command(q, cmd);
}
break;
case ACTION_RETRY:
/* Retry the same command immediately */
__scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY, false);
break;
case ACTION_DELAYED_RETRY:
/* Retry the same command after a delay */
__scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, false);
break;
}
}
/*
* Helper for scsi_io_completion() when cmd->result is non-zero. Returns a
* new result that may suppress further error checking. Also modifies
......@@ -869,20 +1035,9 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
struct request_queue *q = cmd->device->request_queue;
struct request *req = cmd->request;
blk_status_t blk_stat = BLK_STS_OK;
struct scsi_sense_hdr sshdr;
bool sense_valid = false;
bool sense_current = true; /* false implies "deferred sense" */
int level = 0;
enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY,
ACTION_DELAYED_RETRY} action;
unsigned long wait_for = (cmd->allowed + 1) * req->timeout;
if (result) { /* does not necessarily mean there is an error */
sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
if (sense_valid)
sense_current = !scsi_sense_is_deferred(&sshdr);
if (result) /* does not necessarily mean there is an error */
result = scsi_io_completion_nz_result(cmd, result, &blk_stat);
}
if (blk_rq_is_passthrough(req)) {
/*
......@@ -936,138 +1091,12 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
* If there had been no error, but we have leftover bytes in the
* requeues just queue the command up again.
*/
if (result == 0)
goto requeue;
blk_stat = scsi_result_to_blk_status(cmd, result);
if (host_byte(result) == DID_RESET) {
/* Third party bus reset or reset for error recovery
* reasons. Just retry the command and see what
* happens.
*/
action = ACTION_RETRY;
} else if (sense_valid && sense_current) {
switch (sshdr.sense_key) {
case UNIT_ATTENTION:
if (cmd->device->removable) {
/* Detected disc change. Set a bit
* and quietly refuse further access.
*/
cmd->device->changed = 1;
action = ACTION_FAIL;
} else {
/* Must have been a power glitch, or a
* bus reset. Could not have been a
* media change, so we just retry the
* command and see what happens.
*/
action = ACTION_RETRY;
}
break;
case ILLEGAL_REQUEST:
/* If we had an ILLEGAL REQUEST returned, then
* we may have performed an unsupported
* command. The only thing this should be
* would be a ten byte read where only a six
* byte read was supported. Also, on a system
* where READ CAPACITY failed, we may have
* read past the end of the disk.
*/
if ((cmd->device->use_10_for_rw &&
sshdr.asc == 0x20 && sshdr.ascq == 0x00) &&
(cmd->cmnd[0] == READ_10 ||
cmd->cmnd[0] == WRITE_10)) {
/* This will issue a new 6-byte command. */
cmd->device->use_10_for_rw = 0;
action = ACTION_REPREP;
} else if (sshdr.asc == 0x10) /* DIX */ {
action = ACTION_FAIL;
blk_stat = BLK_STS_PROTECTION;
/* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
} else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
action = ACTION_FAIL;
blk_stat = BLK_STS_TARGET;
} else
action = ACTION_FAIL;
break;
case ABORTED_COMMAND:
action = ACTION_FAIL;
if (sshdr.asc == 0x10) /* DIF */
blk_stat = BLK_STS_PROTECTION;
break;
case NOT_READY:
/* If the device is in the process of becoming
* ready, or has a temporary blockage, retry.
*/
if (sshdr.asc == 0x04) {
switch (sshdr.ascq) {
case 0x01: /* becoming ready */
case 0x04: /* format in progress */
case 0x05: /* rebuild in progress */
case 0x06: /* recalculation in progress */
case 0x07: /* operation in progress */
case 0x08: /* Long write in progress */
case 0x09: /* self test in progress */
case 0x14: /* space allocation in progress */
case 0x1a: /* start stop unit in progress */
case 0x1b: /* sanitize in progress */
case 0x1d: /* configuration in progress */
case 0x24: /* depopulation in progress */
action = ACTION_DELAYED_RETRY;
break;
default:
action = ACTION_FAIL;
break;
}
} else
action = ACTION_FAIL;
break;
case VOLUME_OVERFLOW:
/* See SSC3rXX or current. */
action = ACTION_FAIL;
break;
default:
action = ACTION_FAIL;
break;
}
} else
action = ACTION_FAIL;
if (action != ACTION_FAIL &&
time_before(cmd->jiffies_at_alloc + wait_for, jiffies))
action = ACTION_FAIL;
switch (action) {
case ACTION_FAIL:
/* Give up and fail the remainder of the request */
if (!(req->rq_flags & RQF_QUIET)) {
static DEFINE_RATELIMIT_STATE(_rs,
DEFAULT_RATELIMIT_INTERVAL,
DEFAULT_RATELIMIT_BURST);
if (unlikely(scsi_logging_level))
level = SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
SCSI_LOG_MLCOMPLETE_BITS);
if (result == 0) {
/*
* if logging is enabled the failure will be printed
* in scsi_log_completion(), so avoid duplicate messages
*/
if (!level && __ratelimit(&_rs)) {
scsi_print_result(cmd, NULL, FAILED);
if (driver_byte(result) & DRIVER_SENSE)
scsi_print_sense(cmd);
scsi_print_command(cmd);
}
}
if (!scsi_end_request(req, blk_stat, blk_rq_err_bytes(req), 0))
return;
/*FALLTHRU*/
case ACTION_REPREP:
requeue:
/* Unprep the request and put it back at the head of the queue.
* A new command will be prepared and issued.
* Unprep the request and put it back at the head of the
* queue. A new command will be prepared and issued.
* This block is the same as case ACTION_REPREP in
* scsi_io_completion_action() above.
*/
if (q->mq_ops) {
scsi_mq_requeue_cmd(cmd);
......@@ -1075,16 +1104,8 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
scsi_release_buffers(cmd);
scsi_requeue_command(q, cmd);
}
break;
case ACTION_RETRY:
/* Retry the same command immediately */
__scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY, false);
break;
case ACTION_DELAYED_RETRY:
/* Retry the same command after a delay */
__scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, false);
break;
}
} else
scsi_io_completion_action(cmd, result);
}
static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7