crypto: caam - Fix the 'quoted string split across lines'

Fix the checkpatch warnings that the strings were split across
multiple lines. Checkpatch now complains about lines over 80,
but this is better, since we can actually grep the source code
for these strings now.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/caam/error.c

@@ -16,13 +16,10 @@ static const struct {
 	const char *error_text;
 } desc_error_list[] = {
 	{ 0x00, "No error." },
-	{ 0x01, "SGT Length Error. The descriptor is trying to read "
-		"more data than is contained in the SGT table." },
+	{ 0x01, "SGT Length Error. The descriptor is trying to read more data than is contained in the SGT table." },
 	{ 0x02, "SGT Null Entry Error." },
-	{ 0x03, "Job Ring Control Error. There is a bad value in the "
-		"Job Ring Control register." },
-	{ 0x04, "Invalid Descriptor Command. The Descriptor Command "
-		"field is invalid." },
+	{ 0x03, "Job Ring Control Error. There is a bad value in the Job Ring Control register." },
+	{ 0x04, "Invalid Descriptor Command. The Descriptor Command field is invalid." },
 	{ 0x05, "Reserved." },
 	{ 0x06, "Invalid KEY Command" },
 	{ 0x07, "Invalid LOAD Command" },
@@ -31,55 +28,26 @@ static const struct {
 	{ 0x0A, "Invalid FIFO LOAD Command" },
 	{ 0x0B, "Invalid FIFO STORE Command" },
 	{ 0x0C, "Invalid MOVE/MOVE_LEN Command" },
-	{ 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is "
-		"invalid because the target is not a Job Header "
-		"Command, or the jump is from a Trusted Descriptor to "
-		"a Job Descriptor, or because the target Descriptor "
-		"contains a Shared Descriptor." },
+	{ 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is invalid because the target is not a Job Header Command, or the jump is from a Trusted Descriptor to a Job Descriptor, or because the target Descriptor contains a Shared Descriptor." },
 	{ 0x0E, "Invalid MATH Command" },
 	{ 0x0F, "Invalid SIGNATURE Command" },
-	{ 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR "
-		"Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO "
-		"LOAD, or SEQ FIFO STORE decremented the input or "
-		"output sequence length below 0. This error may result "
-		"if a built-in PROTOCOL Command has encountered a "
-		"malformed PDU." },
+	{ 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO LOAD, or SEQ FIFO STORE decremented the input or output sequence length below 0. This error may result if a built-in PROTOCOL Command has encountered a malformed PDU." },
 	{ 0x11, "Skip data type invalid. The type must be 0xE or 0xF."},
 	{ 0x12, "Shared Descriptor Header Error" },
-	{ 0x13, "Header Error. Invalid length or parity, or certain "
-		"other problems." },
-	{ 0x14, "Burster Error. Burster has gotten to an illegal "
-		"state" },
-	{ 0x15, "Context Register Length Error. The descriptor is "
-		"trying to read or write past the end of the Context "
-		"Register. A SEQ LOAD or SEQ STORE with the VLF bit "
-		"set was executed with too large a length in the "
-		"variable length register (VSOL for SEQ STORE or VSIL "
-		"for SEQ LOAD)." },
+	{ 0x13, "Header Error. Invalid length or parity, or certain other problems." },
+	{ 0x14, "Burster Error. Burster has gotten to an illegal state" },
+	{ 0x15, "Context Register Length Error. The descriptor is trying to read or write past the end of the Context Register. A SEQ LOAD or SEQ STORE with the VLF bit set was executed with too large a length in the variable length register (VSOL for SEQ STORE or VSIL for SEQ LOAD)." },
 	{ 0x16, "DMA Error" },
 	{ 0x17, "Reserved." },
 	{ 0x1A, "Job failed due to JR reset" },
 	{ 0x1B, "Job failed due to Fail Mode" },
 	{ 0x1C, "DECO Watchdog timer timeout error" },
-	{ 0x1D, "DECO tried to copy a key from another DECO but the "
-		"other DECO's Key Registers were locked" },
-	{ 0x1E, "DECO attempted to copy data from a DECO that had an "
-		"unmasked Descriptor error" },
-	{ 0x1F, "LIODN error. DECO was trying to share from itself or "
-		"from another DECO but the two Non-SEQ LIODN values "
-		"didn't match or the 'shared from' DECO's Descriptor "
-		"required that the SEQ LIODNs be the same and they "
-		"aren't." },
-	{ 0x20, "DECO has completed a reset initiated via the DRR "
-		"register" },
-	{ 0x21, "Nonce error. When using EKT (CCM) key encryption "
-		"option in the FIFO STORE Command, the Nonce counter "
-		"reached its maximum value and this encryption mode "
-		"can no longer be used." },
-	{ 0x22, "Meta data is too large (> 511 bytes) for TLS decap "
-		"(input frame; block ciphers) and IPsec decap (output "
-		"frame, when doing the next header byte update) and "
-		"DCRC (output frame)." },
+	{ 0x1D, "DECO tried to copy a key from another DECO but the other DECO's Key Registers were locked" },
+	{ 0x1E, "DECO attempted to copy data from a DECO that had an unmasked Descriptor error" },
+	{ 0x1F, "LIODN error. DECO was trying to share from itself or from another DECO but the two Non-SEQ LIODN values didn't match or the 'shared from' DECO's Descriptor required that the SEQ LIODNs be the same and they aren't." },
+	{ 0x20, "DECO has completed a reset initiated via the DRR register" },
+	{ 0x21, "Nonce error. When using EKT (CCM) key encryption option in the FIFO STORE Command, the Nonce counter reached its maximum value and this encryption mode can no longer be used." },
+	{ 0x22, "Meta data is too large (> 511 bytes) for TLS decap (input frame; block ciphers) and IPsec decap (output frame, when doing the next header byte update) and DCRC (output frame)." },
 	{ 0x23, "Read Input Frame error" },
 	{ 0x24, "JDKEK, TDKEK or TDSK not loaded error" },
 	{ 0x80, "DNR (do not run) error" },
@@ -90,23 +58,14 @@ static const struct {
 	{ 0x85, "Sequence number overflow" },
 	{ 0x86, "Sigver invalid signature" },
 	{ 0x87, "DSA Sign Illegal test descriptor" },
-	{ 0x88, "Protocol Format Error - A protocol has seen an error "
-		"in the format of data received. When running RSA, "
-		"this means that formatting with random padding was "
-		"used, and did not follow the form: 0x00, 0x02, 8-to-N "
-		"bytes of non-zero pad, 0x00, F data." },
-	{ 0x89, "Protocol Size Error - A protocol has seen an error in "
-		"size. When running RSA, pdb size N < (size of F) when "
-		"no formatting is used; or pdb size N < (F + 11) when "
-		"formatting is used." },
+	{ 0x88, "Protocol Format Error - A protocol has seen an error in the format of data received. When running RSA, this means that formatting with random padding was used, and did not follow the form: 0x00, 0x02, 8-to-N bytes of non-zero pad, 0x00, F data." },
+	{ 0x89, "Protocol Size Error - A protocol has seen an error in size. When running RSA, pdb size N < (size of F) when no formatting is used; or pdb size N < (F + 11) when formatting is used." },
 	{ 0xC1, "Blob Command error: Undefined mode" },
 	{ 0xC2, "Blob Command error: Secure Memory Blob mode error" },
-	{ 0xC4, "Blob Command error: Black Blob key or input size "
-		"error" },
+	{ 0xC4, "Blob Command error: Black Blob key or input size error" },
 	{ 0xC5, "Blob Command error: Invalid key destination" },
 	{ 0xC8, "Blob Command error: Trusted/Secure mode error" },
-	{ 0xF0, "IPsec TTL or hop limit field either came in as 0, "
-		"or was decremented to 0" },
+	{ 0xF0, "IPsec TTL or hop limit field either came in as 0, or was decremented to 0" },
 	{ 0xF1, "3GPP HFN matches or exceeds the Threshold" },
 };