Commit da8cd085 authored by Arun Ramadoss's avatar Arun Ramadoss Committed by David S. Miller

net: dsa: microchip: add support for common phylink mac link up

This patch add the support for common phylink mac link up for the ksz
series switch. The register address, bit position and values are
configured based on the chip id to the dev->info structure.
Signed-off-by: default avatarArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 8560664f
......@@ -223,7 +223,6 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
.mirror_del = ksz9477_port_mirror_del,
.get_caps = lan937x_phylink_get_caps,
.phylink_mac_config = lan937x_phylink_mac_config,
.phylink_mac_link_up = lan937x_phylink_mac_link_up,
.fdb_dump = ksz9477_fdb_dump,
.fdb_add = ksz9477_fdb_add,
.fdb_del = ksz9477_fdb_del,
......@@ -1467,7 +1466,7 @@ static void ksz_set_100_10mbit(struct ksz_device *dev, int port, int speed)
ksz_pwrite8(dev, port, regs[P_XMII_CTRL_0], data8);
}
void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed)
static void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed)
{
if (speed == SPEED_1000)
ksz_set_gbit(dev, port, true);
......@@ -1478,7 +1477,7 @@ void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed)
ksz_set_100_10mbit(dev, port, speed);
}
void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
bool tx_pause, bool rx_pause)
{
const u8 *bitval = dev->info->xmii_ctrl0;
......@@ -1511,6 +1510,19 @@ static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
int duplex, bool tx_pause, bool rx_pause)
{
struct ksz_device *dev = ds->priv;
struct ksz_port *p;
p = &dev->ports[port];
/* Internal PHYs */
if (dev->info->internal_phy[port])
return;
p->phydev.speed = speed;
ksz_port_set_xmii_speed(dev, port, speed);
ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
if (dev->dev_ops->phylink_mac_link_up)
dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface,
......
......@@ -313,9 +313,6 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port);
void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
bool ksz_get_gbit(struct ksz_device *dev, int port);
void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit);
void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed);
void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
bool tx_pause, bool rx_pause);
extern const struct ksz_chip_data ksz_switch_chips[];
/* Common register access functions */
......
......@@ -17,10 +17,6 @@ void lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val);
int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu);
void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
struct phylink_config *config);
void lan937x_phylink_mac_link_up(struct ksz_device *dev, int port,
unsigned int mode, phy_interface_t interface,
struct phy_device *phydev, int speed,
int duplex, bool tx_pause, bool rx_pause);
void lan937x_phylink_mac_config(struct ksz_device *dev, int port,
unsigned int mode,
const struct phylink_link_state *state);
......
......@@ -345,15 +345,6 @@ static void lan937x_mac_config(struct ksz_device *dev, int port,
ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
}
static void lan937x_config_interface(struct ksz_device *dev, int port,
int speed, int duplex,
bool tx_pause, bool rx_pause)
{
ksz_port_set_xmii_speed(dev, port, speed);
ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
}
void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
struct phylink_config *config)
{
......@@ -366,19 +357,6 @@ void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
}
}
void lan937x_phylink_mac_link_up(struct ksz_device *dev, int port,
unsigned int mode, phy_interface_t interface,
struct phy_device *phydev, int speed,
int duplex, bool tx_pause, bool rx_pause)
{
/* Internal PHYs */
if (dev->info->internal_phy[port])
return;
lan937x_config_interface(dev, port, speed, duplex,
tx_pause, rx_pause);
}
void lan937x_phylink_mac_config(struct ksz_device *dev, int port,
unsigned int mode,
const struct phylink_link_state *state)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment