rtlwifi: rtl8192se: Fixed coding style issues in the driver

This patch fixes almost all coding issues in the rtl8192se driver. Only
exception is putting trailing */ on separate lines.
Signed-off-by: Daniel Stamer <daniel@stamer.info>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rtlwifi/rtl8192se/def.h

@@ -522,8 +522,7 @@ enum fwcmd_iotype {
 	FW_CMD_IQK_ENABLE = 30,
 };
 
-/*
- * Driver info contain PHY status
+/* Driver info contain PHY status
  * and other variabel size info
  * PHY Status content as below
  */

drivers/net/wireless/rtlwifi/rtl8192se/dm.c

@@ -465,8 +465,8 @@ static void _rtl92s_dm_initial_gain_sta_beforeconnect(struct ieee80211_hw *hw)
 				digtable->cur_igvalue =
 						digtable->rx_gain_range_min;
 			else
-				digtable->cur_igvalue = digtable->rssi_val + 10 -
-						digtable->back_val;
+				digtable->cur_igvalue = digtable->rssi_val + 10
+					- digtable->back_val;
 
 			if (falsealm_cnt->cnt_all > 10000)
 				digtable->cur_igvalue =
@@ -518,7 +518,7 @@ static void _rtl92s_dm_initial_gain_sta_beforeconnect(struct ieee80211_hw *hw)
 static void _rtl92s_dm_ctrl_initgain_bytwoport(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct dig_t *digtable = &rtlpriv->dm_digtable;
+	struct dig_t *dig = &rtlpriv->dm_digtable;
 
 	if (rtlpriv->mac80211.act_scanning)
 		return;
@@ -526,17 +526,17 @@ static void _rtl92s_dm_ctrl_initgain_bytwoport(struct ieee80211_hw *hw)
 	/* Decide the current status and if modify initial gain or not */
 	if (rtlpriv->mac80211.link_state >= MAC80211_LINKED ||
 	    rtlpriv->mac80211.opmode == NL80211_IFTYPE_ADHOC)
-		digtable->cur_sta_cstate = DIG_STA_CONNECT;
+		dig->cur_sta_cstate = DIG_STA_CONNECT;
 	else
-		digtable->cur_sta_cstate = DIG_STA_DISCONNECT;
+		dig->cur_sta_cstate = DIG_STA_DISCONNECT;
 
-	digtable->rssi_val = rtlpriv->dm.undec_sm_pwdb;
+	dig->rssi_val = rtlpriv->dm.undec_sm_pwdb;
 
 	/* Change dig mode to rssi */
-	if (digtable->cur_sta_cstate != DIG_STA_DISCONNECT) {
-		if (digtable->dig_twoport_algorithm ==
+	if (dig->cur_sta_cstate != DIG_STA_DISCONNECT) {
+		if (dig->dig_twoport_algorithm ==
 		    DIG_TWO_PORT_ALGO_FALSE_ALARM) {
-			digtable->dig_twoport_algorithm = DIG_TWO_PORT_ALGO_RSSI;
+			dig->dig_twoport_algorithm = DIG_TWO_PORT_ALGO_RSSI;
 			rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_MODE_SS);
 		}
 	}
@@ -544,7 +544,7 @@ static void _rtl92s_dm_ctrl_initgain_bytwoport(struct ieee80211_hw *hw)
 	_rtl92s_dm_false_alarm_counter_statistics(hw);
 	_rtl92s_dm_initial_gain_sta_beforeconnect(hw);
 
-	digtable->pre_sta_cstate = digtable->cur_sta_cstate;
+	dig->pre_sta_cstate = dig->cur_sta_cstate;
 }
 
 static void _rtl92s_dm_ctrl_initgain_byrssi(struct ieee80211_hw *hw)

drivers/net/wireless/rtlwifi/rtl8192se/hw.c

@@ -1089,8 +1089,9 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 	return err;
 }
 
-void rtl92se_set_mac_addr(struct rtl_io *io, const u8 * addr)
+void rtl92se_set_mac_addr(struct rtl_io *io, const u8 *addr)
 {
+	/* This is a stub. */
 }
 
 void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)

drivers/net/wireless/rtlwifi/rtl8192se/hw.h

@@ -54,7 +54,7 @@ void rtl92se_disable_interrupt(struct ieee80211_hw *hw);
 int rtl92se_set_network_type(struct ieee80211_hw *hw,
 			     enum nl80211_iftype type);
 void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
-void rtl92se_set_mac_addr(struct rtl_io *io, const u8 * addr);
+void rtl92se_set_mac_addr(struct rtl_io *io, const u8 *addr);
 void rtl92se_set_qos(struct ieee80211_hw *hw, int aci);
 void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw);
 void rtl92se_set_beacon_interval(struct ieee80211_hw *hw);

drivers/net/wireless/rtlwifi/rtl8192se/sw.c

@@ -50,8 +50,7 @@ static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw)
 	/*close ASPM for AMD defaultly */
 	rtlpci->const_amdpci_aspm = 0;
 
-	/*
-	 * ASPM PS mode.
+	/* ASPM PS mode.
 	 * 0 - Disable ASPM,
 	 * 1 - Enable ASPM without Clock Req,
 	 * 2 - Enable ASPM with Clock Req,
@@ -67,8 +66,7 @@ static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw)
 	/*Setting for PCI-E bridge */
 	rtlpci->const_hostpci_aspm_setting = 0x02;
 
-	/*
-	 * In Hw/Sw Radio Off situation.
+	/* In Hw/Sw Radio Off situation.
 	 * 0 - Default,
 	 * 1 - From ASPM setting without low Mac Pwr,
 	 * 2 - From ASPM setting with low Mac Pwr,
@@ -77,8 +75,7 @@ static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw)
 	 */
 	rtlpci->const_hwsw_rfoff_d3 = 2;
 
-	/*
-	 * This setting works for those device with
+	/* This setting works for those device with
 	 * backdoor ASPM setting such as EPHY setting.
 	 * 0 - Not support ASPM,
 	 * 1 - Support ASPM,