Commit dae7cb41 authored by Vittorio Gambaletta (VittGam)'s avatar Vittorio Gambaletta (VittGam) Committed by Greg Kroah-Hartman

ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards.

commit 79e57dd1 upstream.

The active_high LED of my Wistron DNMA-92 is still being recognized as
active_low on 4.7.6 mainline. When I was preparing my former commit
0f9edcdd ("ath9k: Fix LED polarity for some Mini PCI AR9220 MB92
cards.") to fix that I must have somehow messed up with testing, because
I tested the final version of that patch before sending it, and it was
apparently working; but now it is not working on 4.7.6 mainline.

I initially added the PCI_DEVICE_SUB section for 0x0029/0x2096 above the
PCI_VDEVICE section for 0x0029; but then I moved the former below the
latter after seeing how 0x002A sections were sorted in the file.

This turned out to be wrong: if a generic PCI_VDEVICE entry (that has
both subvendor and subdevice IDs set to PCI_ANY_ID) is put before a more
specific one (PCI_DEVICE_SUB), then the generic PCI_VDEVICE entry will
match first and will be used.

With this patch, 0x0029/0x2096 has finally got active_high LED on 4.7.6.

While I'm at it, let's fix 0x002A too by also moving its generic definition
below its specific ones.

Fixes: 0f9edcdd ("ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.")
Signed-off-by: default avatarVittorio Gambaletta <linuxbugs@vittgam.net>
[kvalo@qca.qualcomm.com: improve the commit log based on email discussions]
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b63929e8
......@@ -27,7 +27,6 @@ static const struct pci_device_id ath_pci_id_table[] = {
{ PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */
{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
#ifdef CONFIG_ATH9K_PCOEM
/* Mini PCI AR9220 MB92 cards: Compex WLM200NX, Wistron DNMA-92 */
......@@ -38,7 +37,7 @@ static const struct pci_device_id ath_pci_id_table[] = {
.driver_data = ATH9K_PCI_LED_ACT_HI },
#endif
{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
#ifdef CONFIG_ATH9K_PCOEM
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
......@@ -86,7 +85,11 @@ static const struct pci_device_id ath_pci_id_table[] = {
0x10CF, /* Fujitsu */
0x1536),
.driver_data = ATH9K_PCI_D3_L1_WAR },
#endif
{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
#ifdef CONFIG_ATH9K_PCOEM
/* AR9285 card for Asus */
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
0x002B,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment