Commit dafc4f7b authored by Éric Piel's avatar Éric Piel Committed by Greg Kroah-Hartman

USB: ftdi-sio: add support for more Physik Instrumente devices

Commit b69cc672 added support for the E-861.  After acquiring a C-867, I
realised that every Physik Instrumente's device has a different PID. They are
listed in the Windows device driver's .inf file. So here are all PIDs for the
current (and probably future) USB devices from Physik Instrumente.

Compiled, but only actually tested on the E-861 and C-867.
Signed-off-by: default avatarÉric Piel <piel@delmic.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent fea7a08a
......@@ -810,7 +810,24 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
{ USB_DEVICE(FTDI_VID, PI_C865_PID) },
{ USB_DEVICE(FTDI_VID, PI_C857_PID) },
{ USB_DEVICE(PI_VID, PI_C866_PID) },
{ USB_DEVICE(PI_VID, PI_C663_PID) },
{ USB_DEVICE(PI_VID, PI_C725_PID) },
{ USB_DEVICE(PI_VID, PI_E517_PID) },
{ USB_DEVICE(PI_VID, PI_C863_PID) },
{ USB_DEVICE(PI_VID, PI_E861_PID) },
{ USB_DEVICE(PI_VID, PI_C867_PID) },
{ USB_DEVICE(PI_VID, PI_E609_PID) },
{ USB_DEVICE(PI_VID, PI_E709_PID) },
{ USB_DEVICE(PI_VID, PI_100F_PID) },
{ USB_DEVICE(PI_VID, PI_1011_PID) },
{ USB_DEVICE(PI_VID, PI_1012_PID) },
{ USB_DEVICE(PI_VID, PI_1013_PID) },
{ USB_DEVICE(PI_VID, PI_1014_PID) },
{ USB_DEVICE(PI_VID, PI_1015_PID) },
{ USB_DEVICE(PI_VID, PI_1016_PID) },
{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
......
......@@ -791,8 +791,27 @@
* Physik Instrumente
* http://www.physikinstrumente.com/en/products/
*/
/* These two devices use the VID of FTDI */
#define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */
#define PI_C857_PID 0xe0a1 /* PI Encoder Trigger Box */
#define PI_VID 0x1a72 /* Vendor ID */
#define PI_E861_PID 0x1008 /* E-861 piezo controller USB connection */
#define PI_C866_PID 0x1000 /* PI C-866 Piezomotor Controller */
#define PI_C663_PID 0x1001 /* PI C-663 Mercury-Step */
#define PI_C725_PID 0x1002 /* PI C-725 Piezomotor Controller */
#define PI_E517_PID 0x1005 /* PI E-517 Digital Piezo Controller Operation Module */
#define PI_C863_PID 0x1007 /* PI C-863 */
#define PI_E861_PID 0x1008 /* PI E-861 Piezomotor Controller */
#define PI_C867_PID 0x1009 /* PI C-867 Piezomotor Controller */
#define PI_E609_PID 0x100D /* PI E-609 Digital Piezo Controller */
#define PI_E709_PID 0x100E /* PI E-709 Digital Piezo Controller */
#define PI_100F_PID 0x100F /* PI Digital Piezo Controller */
#define PI_1011_PID 0x1011 /* PI Digital Piezo Controller */
#define PI_1012_PID 0x1012 /* PI Motion Controller */
#define PI_1013_PID 0x1013 /* PI Motion Controller */
#define PI_1014_PID 0x1014 /* PI Device */
#define PI_1015_PID 0x1015 /* PI Device */
#define PI_1016_PID 0x1016 /* PI Digital Servo Module */
/*
* Kondo Kagaku Co.Ltd.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment