Commit db27dd05 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'davinci-for-v4.11/drivers' of...

Merge tag 'davinci-for-v4.11/drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/drivers

Merge "Driver updates for SATA support on DA850." from Sekhar Nori:

These have been acked by SATA maintainer
Tejun Heo. Tejun preferred these be queued
through ARM-SoC because of the dependencies
with platform code.

* tag 'davinci-for-v4.11/drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  sata: ahci-da850: un-hardcode the MPY bits
  sata: ahci-da850: add a workaround for controller instability
  sata: ahci: export ahci_do_hardreset() locally
  sata: ahci-da850: implement a workaround for the softreset quirk
  sata: ahci-da850: add device tree match table
  sata: ahci-da850: get the sata clock using a connection id
parents d2aff02f cdf0ead3
...@@ -398,6 +398,9 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class, ...@@ -398,6 +398,9 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class,
int pmp, unsigned long deadline, int pmp, unsigned long deadline,
int (*check_ready)(struct ata_link *link)); int (*check_ready)(struct ata_link *link));
int ahci_do_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline, bool *online);
unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
int ahci_stop_engine(struct ata_port *ap); int ahci_stop_engine(struct ata_port *ap);
void ahci_start_fis_rx(struct ata_port *ap); void ahci_start_fis_rx(struct ata_port *ap);
......
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include "ahci.h" #include "ahci.h"
#define DRV_NAME "ahci_da850" #define DRV_NAME "ahci_da850"
#define HARDRESET_RETRIES 5
/* SATA PHY Control Register offset from AHCI base */ /* SATA PHY Control Register offset from AHCI base */
#define SATA_P0PHYCR_REG 0x178 #define SATA_P0PHYCR_REG 0x178
...@@ -28,17 +29,8 @@ ...@@ -28,17 +29,8 @@
#define SATA_PHY_TXSWING(x) ((x) << 19) #define SATA_PHY_TXSWING(x) ((x) << 19)
#define SATA_PHY_ENPLL(x) ((x) << 31) #define SATA_PHY_ENPLL(x) ((x) << 31)
/*
* The multiplier needed for 1.5GHz PLL output.
*
* NOTE: This is currently hardcoded to be suitable for 100MHz crystal
* frequency (which is used by DA850 EVM board) and may need to be changed
* if you would like to use this driver on some other board.
*/
#define DA850_SATA_CLK_MULTIPLIER 7
static void da850_sata_init(struct device *dev, void __iomem *pwrdn_reg, static void da850_sata_init(struct device *dev, void __iomem *pwrdn_reg,
void __iomem *ahci_base) void __iomem *ahci_base, u32 mpy)
{ {
unsigned int val; unsigned int val;
...@@ -47,18 +39,122 @@ static void da850_sata_init(struct device *dev, void __iomem *pwrdn_reg, ...@@ -47,18 +39,122 @@ static void da850_sata_init(struct device *dev, void __iomem *pwrdn_reg,
val &= ~BIT(0); val &= ~BIT(0);
writel(val, pwrdn_reg); writel(val, pwrdn_reg);
val = SATA_PHY_MPY(DA850_SATA_CLK_MULTIPLIER + 1) | SATA_PHY_LOS(1) | val = SATA_PHY_MPY(mpy) | SATA_PHY_LOS(1) | SATA_PHY_RXCDR(4) |
SATA_PHY_RXCDR(4) | SATA_PHY_RXEQ(1) | SATA_PHY_TXSWING(3) | SATA_PHY_RXEQ(1) | SATA_PHY_TXSWING(3) | SATA_PHY_ENPLL(1);
SATA_PHY_ENPLL(1);
writel(val, ahci_base + SATA_P0PHYCR_REG); writel(val, ahci_base + SATA_P0PHYCR_REG);
} }
static u32 ahci_da850_calculate_mpy(unsigned long refclk_rate)
{
u32 pll_output = 1500000000, needed;
/*
* We need to determine the value of the multiplier (MPY) bits.
* In order to include the 12.5 multiplier we need to first divide
* the refclk rate by ten.
*
* __div64_32() turned out to be unreliable, sometimes returning
* false results.
*/
WARN((refclk_rate % 10) != 0, "refclk must be divisible by 10");
needed = pll_output / (refclk_rate / 10);
/*
* What we have now is (multiplier * 10).
*
* Let's determine the actual register value we need to write.
*/
switch (needed) {
case 50:
return 0x1;
case 60:
return 0x2;
case 80:
return 0x4;
case 100:
return 0x5;
case 120:
return 0x6;
case 125:
return 0x7;
case 150:
return 0x8;
case 200:
return 0x9;
case 250:
return 0xa;
default:
/*
* We should have divided evenly - if not, return an invalid
* value.
*/
return 0;
}
}
static int ahci_da850_softreset(struct ata_link *link,
unsigned int *class, unsigned long deadline)
{
int pmp, ret;
pmp = sata_srst_pmp(link);
/*
* There's an issue with the SATA controller on da850 SoCs: if we
* enable Port Multiplier support, but the drive is connected directly
* to the board, it can't be detected. As a workaround: if PMP is
* enabled, we first call ahci_do_softreset() and pass it the result of
* sata_srst_pmp(). If this call fails, we retry with pmp = 0.
*/
ret = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
if (pmp && ret == -EBUSY)
return ahci_do_softreset(link, class, 0,
deadline, ahci_check_ready);
return ret;
}
static int ahci_da850_hardreset(struct ata_link *link,
unsigned int *class, unsigned long deadline)
{
int ret, retry = HARDRESET_RETRIES;
bool online;
/*
* In order to correctly service the LCD controller of the da850 SoC,
* we increased the PLL0 frequency to 456MHz from the default 300MHz.
*
* This made the SATA controller unstable and the hardreset operation
* does not always succeed the first time. Before really giving up to
* bring up the link, retry the reset a couple times.
*/
do {
ret = ahci_do_hardreset(link, class, deadline, &online);
if (online)
return ret;
} while (retry--);
return ret;
}
static struct ata_port_operations ahci_da850_port_ops = {
.inherits = &ahci_platform_ops,
.softreset = ahci_da850_softreset,
/*
* No need to override .pmp_softreset - it's only used for actual
* PMP-enabled ports.
*/
.hardreset = ahci_da850_hardreset,
.pmp_hardreset = ahci_da850_hardreset,
};
static const struct ata_port_info ahci_da850_port_info = { static const struct ata_port_info ahci_da850_port_info = {
.flags = AHCI_FLAG_COMMON, .flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4, .pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6, .udma_mask = ATA_UDMA6,
.port_ops = &ahci_platform_ops, .port_ops = &ahci_da850_port_ops,
}; };
static struct scsi_host_template ahci_platform_sht = { static struct scsi_host_template ahci_platform_sht = {
...@@ -69,14 +165,52 @@ static int ahci_da850_probe(struct platform_device *pdev) ...@@ -69,14 +165,52 @@ static int ahci_da850_probe(struct platform_device *pdev)
{ {
struct device *dev = &pdev->dev; struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv; struct ahci_host_priv *hpriv;
struct resource *res;
void __iomem *pwrdn_reg; void __iomem *pwrdn_reg;
struct resource *res;
struct clk *clk;
u32 mpy;
int rc; int rc;
hpriv = ahci_platform_get_resources(pdev); hpriv = ahci_platform_get_resources(pdev);
if (IS_ERR(hpriv)) if (IS_ERR(hpriv))
return PTR_ERR(hpriv); return PTR_ERR(hpriv);
/*
* Internally ahci_platform_get_resources() calls clk_get(dev, NULL)
* when trying to obtain the functional clock. This SATA controller
* uses two clocks for which we specify two connection ids. If we don't
* have the functional clock at this point - call clk_get() again with
* con_id = "fck".
*/
if (!hpriv->clks[0]) {
clk = clk_get(dev, "fck");
if (IS_ERR(clk))
return PTR_ERR(clk);
hpriv->clks[0] = clk;
}
/*
* The second clock used by ahci-da850 is the external REFCLK. If we
* didn't get it from ahci_platform_get_resources(), let's try to
* specify the con_id in clk_get().
*/
if (!hpriv->clks[1]) {
clk = clk_get(dev, "refclk");
if (IS_ERR(clk)) {
dev_err(dev, "unable to obtain the reference clock");
return -ENODEV;
}
hpriv->clks[1] = clk;
}
mpy = ahci_da850_calculate_mpy(clk_get_rate(hpriv->clks[1]));
if (mpy == 0) {
dev_err(dev, "invalid REFCLK multiplier value: 0x%x", mpy);
return -EINVAL;
}
rc = ahci_platform_enable_resources(hpriv); rc = ahci_platform_enable_resources(hpriv);
if (rc) if (rc)
return rc; return rc;
...@@ -89,7 +223,7 @@ static int ahci_da850_probe(struct platform_device *pdev) ...@@ -89,7 +223,7 @@ static int ahci_da850_probe(struct platform_device *pdev)
if (!pwrdn_reg) if (!pwrdn_reg)
goto disable_resources; goto disable_resources;
da850_sata_init(dev, pwrdn_reg, hpriv->mmio); da850_sata_init(dev, pwrdn_reg, hpriv->mmio, mpy);
rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info, rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info,
&ahci_platform_sht); &ahci_platform_sht);
...@@ -105,11 +239,18 @@ static int ahci_da850_probe(struct platform_device *pdev) ...@@ -105,11 +239,18 @@ static int ahci_da850_probe(struct platform_device *pdev)
static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend, static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
ahci_platform_resume); ahci_platform_resume);
static const struct of_device_id ahci_da850_of_match[] = {
{ .compatible = "ti,da850-ahci", },
{ },
};
MODULE_DEVICE_TABLE(of, ahci_da850_of_match);
static struct platform_driver ahci_da850_driver = { static struct platform_driver ahci_da850_driver = {
.probe = ahci_da850_probe, .probe = ahci_da850_probe,
.remove = ata_platform_remove_one, .remove = ata_platform_remove_one,
.driver = { .driver = {
.name = DRV_NAME, .name = DRV_NAME,
.of_match_table = ahci_da850_of_match,
.pm = &ahci_da850_pm_ops, .pm = &ahci_da850_pm_ops,
}, },
}; };
......
...@@ -1519,8 +1519,8 @@ static int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class, ...@@ -1519,8 +1519,8 @@ static int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class,
return rc; return rc;
} }
static int ahci_hardreset(struct ata_link *link, unsigned int *class, int ahci_do_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline) unsigned long deadline, bool *online)
{ {
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap; struct ata_port *ap = link->ap;
...@@ -1528,7 +1528,6 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class, ...@@ -1528,7 +1528,6 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
struct ahci_host_priv *hpriv = ap->host->private_data; struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf; struct ata_taskfile tf;
bool online;
int rc; int rc;
DPRINTK("ENTER\n"); DPRINTK("ENTER\n");
...@@ -1540,17 +1539,26 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class, ...@@ -1540,17 +1539,26 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
tf.command = ATA_BUSY; tf.command = ATA_BUSY;
ata_tf_to_fis(&tf, 0, 0, d2h_fis); ata_tf_to_fis(&tf, 0, 0, d2h_fis);
rc = sata_link_hardreset(link, timing, deadline, &online, rc = sata_link_hardreset(link, timing, deadline, online,
ahci_check_ready); ahci_check_ready);
hpriv->start_engine(ap); hpriv->start_engine(ap);
if (online) if (*online)
*class = ahci_dev_classify(ap); *class = ahci_dev_classify(ap);
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
return rc; return rc;
} }
EXPORT_SYMBOL_GPL(ahci_do_hardreset);
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
bool online;
return ahci_do_hardreset(link, class, deadline, &online);
}
static void ahci_postreset(struct ata_link *link, unsigned int *class) static void ahci_postreset(struct ata_link *link, unsigned int *class)
{ {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment