Skip to content

L
linux
Commit db62983a authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch 'net/ax88796' of git://git.pengutronix.de/git/mkl/linux-2.6

parents 9e1453c5 f6d7f2c6
Show whitespace changes
Inline Side-by-side
Showing with 395 additions and 419 deletions
drivers/net/Kconfig
View file @ db62983a
......@@ -238,8 +238,8 @@ source "drivers/net/arm/Kconfig"
config AX88796
tristate "ASIX AX88796 NE2000 clone support"
depends on ARM || MIPS || SUPERH
select CRC32
select MII
select PHYLIB
select MDIO_BITBANG
help
AX88796 driver, using platform bus to provide
chip detection and resources
......
drivers/net/ax88796.c
View file @ db62983a
......@@ -9,7 +9,7 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
*/
#include <linux/module.h>
#include <linux/kernel.h>
......@@ -17,22 +17,21 @@
#include <linux/isapnp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/mdio-bitbang.h>
#include <linux/phy.h>
#include <linux/eeprom_93cx6.h>
#include <linux/slab.h>
#include <net/ax88796.h>
#include <asm/system.h>
#include <asm/io.h>
static int phy_debug = 0;
/* Rename the lib8390.c functions to show that they are in this driver */
#define __ei_open ax_ei_open
......@@ -78,19 +77,22 @@ static unsigned char version[] = "ax88796.c: Copyright 2005,2007 Simtec Electron
#define NESM_START_PG 0x40 /* First page of TX buffer */
#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
#define AX_GPOC_PPDSET BIT(6)
/* device private data */
struct ax_device {
struct timer_list mii_timer;
spinlock_t mii_lock;
struct mii_if_info mii;
struct mii_bus *mii_bus;
struct mdiobb_ctrl bb_ctrl;
struct phy_device *phy_dev;
void __iomem *addr_memr;
u8 reg_memr;
int link;
int speed;
int duplex;
u32 msg_enable;
void __iomem *map2;
struct platform_device *dev;
struct resource *mem;
struct resource *mem2;
struct ax_plat_data *plat;
const struct ax_plat_data *plat;
unsigned char running;
unsigned char resume_open;
......@@ -102,15 +104,15 @@ struct ax_device {
static inline struct ax_device *to_ax_dev(struct net_device *dev)
{
struct ei_device *ei_local = netdev_priv(dev);
return (struct ax_device *)(ei_local+1);
return (struct ax_device *)(ei_local + 1);
}
/* ax_initial_check
/*
* ax_initial_check
*
* do an initial probe for the card to check wether it exists
* and is functional
*/
static int ax_initial_check(struct net_device *dev)
{
struct ei_device *ei_local = netdev_priv(dev);
......@@ -122,10 +124,10 @@ static int ax_initial_check(struct net_device *dev)
if (reg0 == 0xFF)
return -ENODEV;
ei_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP, ioaddr + E8390_CMD);
regd = ei_inb(ioaddr + 0x0d);
ei_outb(0xff, ioaddr + 0x0d);
ei_outb(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
ei_outb(E8390_NODMA + E8390_PAGE0, ioaddr + E8390_CMD);
ei_inb(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
if (ei_inb(ioaddr + EN0_COUNTER0) != 0) {
ei_outb(reg0, ioaddr);
......@@ -136,29 +138,28 @@ static int ax_initial_check(struct net_device *dev)
return 0;
}
/* Hard reset the card. This used to pause for the same period that a
8390 reset command required, but that shouldn't be necessary. */
/*
* Hard reset the card. This used to pause for the same period that a
* 8390 reset command required, but that shouldn't be necessary.
*/
static void ax_reset_8390(struct net_device *dev)
{
struct ei_device *ei_local = netdev_priv(dev);
struct ax_device *ax = to_ax_dev(dev);
unsigned long reset_start_time = jiffies;
void __iomem *addr = (void __iomem *)dev->base_addr;
if (ei_debug > 1)
dev_dbg(&ax->dev->dev, "resetting the 8390 t=%ld\n", jiffies);
netdev_dbg(dev, "resetting the 8390 t=%ld\n", jiffies);
ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET);
ei_status.txing = 0;
ei_status.dmaing = 0;
ei_local->txing = 0;
ei_local->dmaing = 0;
/* This check _should_not_ be necessary, omit eventually. */
while ((ei_inb(addr + EN0_ISR) & ENISR_RESET) == 0) {
if (jiffies - reset_start_time > 2*HZ/100) {
dev_warn(&ax->dev->dev, "%s: %s did not complete.\n",
__func__, dev->name);
if (jiffies - reset_start_time > 2 * HZ / 100) {
netdev_warn(dev, "%s: did not complete.\n", __func__);
break;
}
}
......@@ -171,70 +172,72 @@ static void ax_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
int ring_page)
{
struct ei_device *ei_local = netdev_priv(dev);
struct ax_device *ax = to_ax_dev(dev);
void __iomem *nic_base = ei_local->mem;
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
if (ei_status.dmaing) {
dev_err(&ax->dev->dev, "%s: DMAing conflict in %s "
if (ei_local->dmaing) {
netdev_err(dev, "DMAing conflict in %s "
"[DMAstat:%d][irqlock:%d].\n",
dev->name, __func__,
ei_status.dmaing, ei_status.irqlock);
__func__,
ei_local->dmaing, ei_local->irqlock);
return;
}
ei_status.dmaing |= 0x01;
ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
ei_local->dmaing |= 0x01;
ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD);
ei_outb(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
ei_outb(0, nic_base + EN0_RCNTHI);
ei_outb(0, nic_base + EN0_RSARLO); /* On page boundary */
ei_outb(ring_page, nic_base + EN0_RSARHI);
ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
if (ei_status.word16)
readsw(nic_base + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
if (ei_local->word16)
readsw(nic_base + NE_DATAPORT, hdr,
sizeof(struct e8390_pkt_hdr) >> 1);
else
readsb(nic_base + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
readsb(nic_base + NE_DATAPORT, hdr,
sizeof(struct e8390_pkt_hdr));
ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
ei_status.dmaing &= ~0x01;
ei_local->dmaing &= ~0x01;
le16_to_cpus(&hdr->count);
}
/* Block input and output, similar to the Crynwr packet driver. If you
are porting to a new ethercard, look at the packet driver source for hints.
The NEx000 doesn't share the on-board packet memory -- you have to put
the packet out through the "remote DMA" dataport using ei_outb. */
/*
* Block input and output, similar to the Crynwr packet driver. If
* you are porting to a new ethercard, look at the packet driver
* source for hints. The NEx000 doesn't share the on-board packet
* memory -- you have to put the packet out through the "remote DMA"
* dataport using ei_outb.
*/
static void ax_block_input(struct net_device *dev, int count,
struct sk_buff *skb, int ring_offset)
{
struct ei_device *ei_local = netdev_priv(dev);
struct ax_device *ax = to_ax_dev(dev);
void __iomem *nic_base = ei_local->mem;
char *buf = skb->data;
if (ei_status.dmaing) {
dev_err(&ax->dev->dev,
"%s: DMAing conflict in %s "
if (ei_local->dmaing) {
netdev_err(dev,
"DMAing conflict in %s "
"[DMAstat:%d][irqlock:%d].\n",
dev->name, __func__,
ei_status.dmaing, ei_status.irqlock);
__func__,
ei_local->dmaing, ei_local->irqlock);
return;
}
ei_status.dmaing |= 0x01;
ei_local->dmaing |= 0x01;
ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + NE_CMD);
ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
ei_outb(count >> 8, nic_base + EN0_RCNTHI);
ei_outb(ring_offset & 0xff, nic_base + EN0_RSARLO);
ei_outb(ring_offset >> 8, nic_base + EN0_RSARHI);
ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
if (ei_status.word16) {
if (ei_local->word16) {
readsw(nic_base + NE_DATAPORT, buf, count >> 1);
if (count & 0x01)
buf[count-1] = ei_inb(nic_base + NE_DATAPORT);
......@@ -243,34 +246,34 @@ static void ax_block_input(struct net_device *dev, int count,
readsb(nic_base + NE_DATAPORT, buf, count);
}
ei_status.dmaing &= ~1;
ei_local->dmaing &= ~1;
}
static void ax_block_output(struct net_device *dev, int count,
const unsigned char *buf, const int start_page)
{
struct ei_device *ei_local = netdev_priv(dev);
struct ax_device *ax = to_ax_dev(dev);
void __iomem *nic_base = ei_local->mem;
unsigned long dma_start;
/* Round the count up for word writes. Do we need to do this?
What effect will an odd byte count have on the 8390?
I should check someday. */
if (ei_status.word16 && (count & 0x01))
/*
* Round the count up for word writes. Do we need to do this?
* What effect will an odd byte count have on the 8390? I
* should check someday.
*/
if (ei_local->word16 && (count & 0x01))
count++;
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
if (ei_status.dmaing) {
dev_err(&ax->dev->dev, "%s: DMAing conflict in %s."
if (ei_local->dmaing) {
netdev_err(dev, "DMAing conflict in %s."
"[DMAstat:%d][irqlock:%d]\n",
dev->name, __func__,
ei_status.dmaing, ei_status.irqlock);
__func__,
ei_local->dmaing, ei_local->irqlock);
return;
}
ei_status.dmaing |= 0x01;
ei_local->dmaing |= 0x01;
/* We should already be in page 0, but to be safe... */
ei_outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
......@@ -283,245 +286,165 @@ static void ax_block_output(struct net_device *dev, int count,
ei_outb(start_page, nic_base + EN0_RSARHI);
ei_outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
if (ei_status.word16) {
writesw(nic_base + NE_DATAPORT, buf, count>>1);
} else {
if (ei_local->word16)
writesw(nic_base + NE_DATAPORT, buf, count >> 1);
else
writesb(nic_base + NE_DATAPORT, buf, count);
}
dma_start = jiffies;
while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) {
if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
dev_warn(&ax->dev->dev,
"%s: timeout waiting for Tx RDC.\n", dev->name);
if (jiffies - dma_start > 2 * HZ / 100) { /* 20ms */
netdev_warn(dev, "timeout waiting for Tx RDC.\n");
ax_reset_8390(dev);
ax_NS8390_init(dev,1);
ax_NS8390_init(dev, 1);
break;
}
}
ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
ei_status.dmaing &= ~0x01;
ei_local->dmaing &= ~0x01;
}
/* definitions for accessing MII/EEPROM interface */
#define AX_MEMR EI_SHIFT(0x14)
#define AX_MEMR_MDC (1<<0)
#define AX_MEMR_MDIR (1<<1)
#define AX_MEMR_MDI (1<<2)
#define AX_MEMR_MDO (1<<3)
#define AX_MEMR_EECS (1<<4)
#define AX_MEMR_EEI (1<<5)
#define AX_MEMR_EEO (1<<6)
#define AX_MEMR_EECLK (1<<7)
/* ax_mii_ei_outbits
*
* write the specified set of bits to the phy
*/
static void
ax_mii_ei_outbits(struct net_device *dev, unsigned int bits, int len)
#define AX_MEMR_MDC BIT(0)
#define AX_MEMR_MDIR BIT(1)
#define AX_MEMR_MDI BIT(2)
#define AX_MEMR_MDO BIT(3)
#define AX_MEMR_EECS BIT(4)
#define AX_MEMR_EEI BIT(5)
#define AX_MEMR_EEO BIT(6)
#define AX_MEMR_EECLK BIT(7)
static void ax_handle_link_change(struct net_device *dev)
{
struct ei_device *ei_local = netdev_priv(dev);
void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
unsigned int memr;
/* clock low, data to output mode */
memr = ei_inb(memr_addr);
memr &= ~(AX_MEMR_MDC | AX_MEMR_MDIR);
ei_outb(memr, memr_addr);
for (len--; len >= 0; len--) {
if (bits & (1 << len))
memr |= AX_MEMR_MDO;
else
memr &= ~AX_MEMR_MDO;
ei_outb(memr, memr_addr);
/* clock high */
struct ax_device *ax = to_ax_dev(dev);
struct phy_device *phy_dev = ax->phy_dev;
int status_change = 0;
ei_outb(memr | AX_MEMR_MDC, memr_addr);
udelay(1);
if (phy_dev->link && ((ax->speed != phy_dev->speed) ||
(ax->duplex != phy_dev->duplex))) {
/* clock low */
ei_outb(memr, memr_addr);
ax->speed = phy_dev->speed;
ax->duplex = phy_dev->duplex;
status_change = 1;
}
/* leaves the clock line low, mdir input */
memr |= AX_MEMR_MDIR;
ei_outb(memr, (void __iomem *)dev->base_addr + AX_MEMR);
}
/* ax_phy_ei_inbits
*
* read a specified number of bits from the phy
*/
static unsigned int
ax_phy_ei_inbits(struct net_device *dev, int no)
{
struct ei_device *ei_local = netdev_priv(dev);
void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
unsigned int memr;
unsigned int result = 0;
/* clock low, data to input mode */
memr = ei_inb(memr_addr);
memr &= ~AX_MEMR_MDC;
memr |= AX_MEMR_MDIR;
ei_outb(memr, memr_addr);
for (no--; no >= 0; no--) {
ei_outb(memr | AX_MEMR_MDC, memr_addr);
udelay(1);
if (ei_inb(memr_addr) & AX_MEMR_MDI)
result |= (1<<no);
ei_outb(memr, memr_addr);
if (phy_dev->link != ax->link) {
if (!phy_dev->link) {
ax->speed = 0;
ax->duplex = -1;
}
ax->link = phy_dev->link;
return result;
}
/* ax_phy_issueaddr
*
* use the low level bit shifting routines to send the address
* and command to the specified phy
*/
status_change = 1;
}
static void
ax_phy_issueaddr(struct net_device *dev, int phy_addr, int reg, int opc)
{
if (phy_debug)
pr_debug("%s: dev %p, %04x, %04x, %d\n",
__func__, dev, phy_addr, reg, opc);
ax_mii_ei_outbits(dev, 0x3f, 6); /* pre-amble */
ax_mii_ei_outbits(dev, 1, 2); /* frame-start */
ax_mii_ei_outbits(dev, opc, 2); /* op code */
ax_mii_ei_outbits(dev, phy_addr, 5); /* phy address */
ax_mii_ei_outbits(dev, reg, 5); /* reg address */
if (status_change)
phy_print_status(phy_dev);
}
static int
ax_phy_read(struct net_device *dev, int phy_addr, int reg)
static int ax_mii_probe(struct net_device *dev)
{
struct ei_device *ei_local = netdev_priv(dev);
unsigned long flags;
unsigned int result;
struct ax_device *ax = to_ax_dev(dev);
struct phy_device *phy_dev = NULL;
int ret;
spin_lock_irqsave(&ei_local->page_lock, flags);
/* find the first phy */
phy_dev = phy_find_first(ax->mii_bus);
if (!phy_dev) {
netdev_err(dev, "no PHY found\n");
return -ENODEV;
}
ax_phy_issueaddr(dev, phy_addr, reg, 2);
ret = phy_connect_direct(dev, phy_dev, ax_handle_link_change, 0,
PHY_INTERFACE_MODE_MII);
if (ret) {
netdev_err(dev, "Could not attach to PHY\n");
return ret;
}
result = ax_phy_ei_inbits(dev, 17);
result &= ~(3<<16);
/* mask with MAC supported features */
phy_dev->supported &= PHY_BASIC_FEATURES;
phy_dev->advertising = phy_dev->supported;
spin_unlock_irqrestore(&ei_local->page_lock, flags);
ax->phy_dev = phy_dev;
if (phy_debug)
pr_debug("%s: %04x.%04x => read %04x\n", __func__,
phy_addr, reg, result);
netdev_info(dev, "PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
phy_dev->drv->name, dev_name(&phy_dev->dev), phy_dev->irq);
return result;
return 0;
}
static void
ax_phy_write(struct net_device *dev, int phy_addr, int reg, int value)
static void ax_phy_switch(struct net_device *dev, int on)
{
struct ei_device *ei = netdev_priv(dev);
struct ei_device *ei_local = netdev_priv(dev);
struct ax_device *ax = to_ax_dev(dev);
unsigned long flags;
dev_dbg(&ax->dev->dev, "%s: %p, %04x, %04x %04x\n",
__func__, dev, phy_addr, reg, value);
spin_lock_irqsave(&ei->page_lock, flags);
ax_phy_issueaddr(dev, phy_addr, reg, 1);
ax_mii_ei_outbits(dev, 2, 2); /* send TA */
ax_mii_ei_outbits(dev, value, 16);
spin_unlock_irqrestore(&ei->page_lock, flags);
}
static void ax_mii_expiry(unsigned long data)
{
struct net_device *dev = (struct net_device *)data;
struct ax_device *ax = to_ax_dev(dev);
unsigned long flags;
u8 reg_gpoc = ax->plat->gpoc_val;
spin_lock_irqsave(&ax->mii_lock, flags);
mii_check_media(&ax->mii, netif_msg_link(ax), 0);
spin_unlock_irqrestore(&ax->mii_lock, flags);
if (!!on)
reg_gpoc &= ~AX_GPOC_PPDSET;
else
reg_gpoc |= AX_GPOC_PPDSET;
if (ax->running) {
ax->mii_timer.expires = jiffies + HZ*2;
add_timer(&ax->mii_timer);
}
ei_outb(reg_gpoc, ei_local->mem + EI_SHIFT(0x17));
}
static int ax_open(struct net_device *dev)
{
struct ax_device *ax = to_ax_dev(dev);
struct ei_device *ei_local = netdev_priv(dev);
int ret;
dev_dbg(&ax->dev->dev, "%s: open\n", dev->name);
netdev_dbg(dev, "open\n");
ret = request_irq(dev->irq, ax_ei_interrupt, ax->irqflags,
dev->name, dev);
if (ret)
return ret;
ret = ax_ei_open(dev);
if (ret) {
free_irq(dev->irq, dev);
return ret;
}
goto failed_request_irq;
/* turn the phy on (if turned off) */
ax_phy_switch(dev, 1);
ei_outb(ax->plat->gpoc_val, ei_local->mem + EI_SHIFT(0x17));
ax->running = 1;
/* start the MII timer */
init_timer(&ax->mii_timer);
ret = ax_mii_probe(dev);
if (ret)
goto failed_mii_probe;
phy_start(ax->phy_dev);
ax->mii_timer.expires = jiffies+1;
ax->mii_timer.data = (unsigned long) dev;
ax->mii_timer.function = ax_mii_expiry;
ret = ax_ei_open(dev);
if (ret)
goto failed_ax_ei_open;
add_timer(&ax->mii_timer);
ax->running = 1;
return 0;
failed_ax_ei_open:
phy_disconnect(ax->phy_dev);
failed_mii_probe:
ax_phy_switch(dev, 0);
free_irq(dev->irq, dev);
failed_request_irq:
return ret;
}
static int ax_close(struct net_device *dev)
{
struct ax_device *ax = to_ax_dev(dev);
struct ei_device *ei_local = netdev_priv(dev);
dev_dbg(&ax->dev->dev, "%s: close\n", dev->name);
/* turn the phy off */
ei_outb(ax->plat->gpoc_val | (1<<6),
ei_local->mem + EI_SHIFT(0x17));
netdev_dbg(dev, "close\n");
ax->running = 0;
wmb();
del_timer_sync(&ax->mii_timer);
ax_ei_close(dev);
/* turn the phy off */
ax_phy_switch(dev, 0);
phy_disconnect(ax->phy_dev);
free_irq(dev->irq, dev);
return 0;
}
......@@ -529,17 +452,15 @@ static int ax_close(struct net_device *dev)
static int ax_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
{
struct ax_device *ax = to_ax_dev(dev);
unsigned long flags;
int rc;
struct phy_device *phy_dev = ax->phy_dev;
if (!netif_running(dev))
return -EINVAL;
spin_lock_irqsave(&ax->mii_lock, flags);
rc = generic_mii_ioctl(&ax->mii, if_mii(req), cmd, NULL);
spin_unlock_irqrestore(&ax->mii_lock, flags);
if (!phy_dev)
return -ENODEV;
return rc;
return phy_mii_ioctl(phy_dev, req, cmd);
}
/* ethtool ops */
......@@ -547,56 +468,40 @@ static int ax_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
static void ax_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
struct ax_device *ax = to_ax_dev(dev);
struct platform_device *pdev = to_platform_device(dev->dev.parent);
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
strcpy(info->bus_info, ax->dev->name);
strcpy(info->bus_info, pdev->name);
}
static int ax_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct ax_device *ax = to_ax_dev(dev);
unsigned long flags;
struct phy_device *phy_dev = ax->phy_dev;
spin_lock_irqsave(&ax->mii_lock, flags);
mii_ethtool_gset(&ax->mii, cmd);
spin_unlock_irqrestore(&ax->mii_lock, flags);
if (!phy_dev)
return -ENODEV;
return 0;
return phy_ethtool_gset(phy_dev, cmd);
}
static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct ax_device *ax = to_ax_dev(dev);
unsigned long flags;
int rc;
spin_lock_irqsave(&ax->mii_lock, flags);
rc = mii_ethtool_sset(&ax->mii, cmd);
spin_unlock_irqrestore(&ax->mii_lock, flags);
return rc;
}
struct phy_device *phy_dev = ax->phy_dev;
static int ax_nway_reset(struct net_device *dev)
{
struct ax_device *ax = to_ax_dev(dev);
return mii_nway_restart(&ax->mii);
}
if (!phy_dev)
return -ENODEV;
static u32 ax_get_link(struct net_device *dev)
{
struct ax_device *ax = to_ax_dev(dev);
return mii_link_ok(&ax->mii);
return phy_ethtool_sset(phy_dev, cmd);
}
static const struct ethtool_ops ax_ethtool_ops = {
.get_drvinfo = ax_get_drvinfo,
.get_settings = ax_get_settings,
.set_settings = ax_set_settings,
.nway_reset = ax_nway_reset,
.get_link = ax_get_link,
.get_link = ethtool_op_get_link,
};
#ifdef CONFIG_AX88796_93CX6
......@@ -647,30 +552,124 @@ static const struct net_device_ops ax_netdev_ops = {
#endif
};
static void ax_bb_mdc(struct mdiobb_ctrl *ctrl, int level)
{
struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl);
if (level)
ax->reg_memr |= AX_MEMR_MDC;
else
ax->reg_memr &= ~AX_MEMR_MDC;
ei_outb(ax->reg_memr, ax->addr_memr);
}
static void ax_bb_dir(struct mdiobb_ctrl *ctrl, int output)
{
struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl);
if (output)
ax->reg_memr &= ~AX_MEMR_MDIR;
else
ax->reg_memr |= AX_MEMR_MDIR;
ei_outb(ax->reg_memr, ax->addr_memr);
}
static void ax_bb_set_data(struct mdiobb_ctrl *ctrl, int value)
{
struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl);
if (value)
ax->reg_memr |= AX_MEMR_MDO;
else
ax->reg_memr &= ~AX_MEMR_MDO;
ei_outb(ax->reg_memr, ax->addr_memr);
}
static int ax_bb_get_data(struct mdiobb_ctrl *ctrl)
{
struct ax_device *ax = container_of(ctrl, struct ax_device, bb_ctrl);
int reg_memr = ei_inb(ax->addr_memr);
return reg_memr & AX_MEMR_MDI ? 1 : 0;
}
static struct mdiobb_ops bb_ops = {
.owner = THIS_MODULE,
.set_mdc = ax_bb_mdc,
.set_mdio_dir = ax_bb_dir,
.set_mdio_data = ax_bb_set_data,
.get_mdio_data = ax_bb_get_data,
};
/* setup code */
static int ax_mii_init(struct net_device *dev)
{
struct platform_device *pdev = to_platform_device(dev->dev.parent);
struct ei_device *ei_local = netdev_priv(dev);
struct ax_device *ax = to_ax_dev(dev);
int err, i;
ax->bb_ctrl.ops = &bb_ops;
ax->addr_memr = ei_local->mem + AX_MEMR;
ax->mii_bus = alloc_mdio_bitbang(&ax->bb_ctrl);
if (!ax->mii_bus) {
err = -ENOMEM;
goto out;
}
ax->mii_bus->name = "ax88796_mii_bus";
ax->mii_bus->parent = dev->dev.parent;
snprintf(ax->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
ax->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
if (!ax->mii_bus->irq) {
err = -ENOMEM;
goto out_free_mdio_bitbang;
}
for (i = 0; i < PHY_MAX_ADDR; i++)
ax->mii_bus->irq[i] = PHY_POLL;
err = mdiobus_register(ax->mii_bus);
if (err)
goto out_free_irq;
return 0;
out_free_irq:
kfree(ax->mii_bus->irq);
out_free_mdio_bitbang:
free_mdio_bitbang(ax->mii_bus);
out:
return err;
}
static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
{
void __iomem *ioaddr = ei_local->mem;
struct ax_device *ax = to_ax_dev(dev);
/* Select page 0*/
ei_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, ioaddr + E8390_CMD);
/* Select page 0 */
ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_STOP, ioaddr + E8390_CMD);
/* set to byte access */
ei_outb(ax->plat->dcr_val & ~1, ioaddr + EN0_DCFG);
ei_outb(ax->plat->gpoc_val, ioaddr + EI_SHIFT(0x17));
}
/* ax_init_dev
/*
* ax_init_dev
*
* initialise the specified device, taking care to note the MAC
* address it may already have (if configured), ensure
* the device is ready to be used by lib8390.c and registerd with
* the network layer.
*/
static int ax_init_dev(struct net_device *dev, int first_init)
static int ax_init_dev(struct net_device *dev)
{
struct ei_device *ei_local = netdev_priv(dev);
struct ax_device *ax = to_ax_dev(dev);
......@@ -690,12 +689,12 @@ static int ax_init_dev(struct net_device *dev, int first_init)
/* read the mac from the card prom if we need it */
if (first_init && ax->plat->flags & AXFLG_HAS_EEPROM) {
if (ax->plat->flags & AXFLG_HAS_EEPROM) {
unsigned char SA_prom[32];
for(i = 0; i < sizeof(SA_prom); i+=2) {
for (i = 0; i < sizeof(SA_prom); i += 2) {
SA_prom[i] = ei_inb(ioaddr + NE_DATAPORT);
SA_prom[i+1] = ei_inb(ioaddr + NE_DATAPORT);
SA_prom[i + 1] = ei_inb(ioaddr + NE_DATAPORT);
}
if (ax->plat->wordlength == 2)
......@@ -706,7 +705,7 @@ static int ax_init_dev(struct net_device *dev, int first_init)
}
#ifdef CONFIG_AX88796_93CX6
if (first_init && ax->plat->flags & AXFLG_HAS_93CX6) {
if (ax->plat->flags & AXFLG_HAS_93CX6) {
unsigned char mac_addr[6];
struct eeprom_93cx6 eeprom;
......@@ -732,10 +731,7 @@ static int ax_init_dev(struct net_device *dev, int first_init)
stop_page = NE1SM_STOP_PG;
}
/* load the mac-address from the device if this is the
* first time we've initialised */
if (first_init) {
/* load the mac-address from the device */
if (ax->plat->flags & AXFLG_MAC_FROMDEV) {
ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
ei_local->mem + E8390_CMD); /* 0x61 */
......@@ -748,51 +744,43 @@ static int ax_init_dev(struct net_device *dev, int first_init)
ax->plat->mac_addr)
memcpy(dev->dev_addr, ax->plat->mac_addr,
ETHER_ADDR_LEN);
}
ax_reset_8390(dev);
ei_status.name = "AX88796";
ei_status.tx_start_page = start_page;
ei_status.stop_page = stop_page;
ei_status.word16 = (ax->plat->wordlength == 2);
ei_status.rx_start_page = start_page + TX_PAGES;
ei_local->name = "AX88796";
ei_local->tx_start_page = start_page;
ei_local->stop_page = stop_page;
ei_local->word16 = (ax->plat->wordlength == 2);
ei_local->rx_start_page = start_page + TX_PAGES;
#ifdef PACKETBUF_MEMSIZE
/* Allow the packet buffer size to be overridden by know-it-alls. */
ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;
ei_local->stop_page = ei_local->tx_start_page + PACKETBUF_MEMSIZE;
#endif
ei_status.reset_8390 = &ax_reset_8390;
ei_status.block_input = &ax_block_input;
ei_status.block_output = &ax_block_output;
ei_status.get_8390_hdr = &ax_get_8390_hdr;
ei_status.priv = 0;
ei_local->reset_8390 = &ax_reset_8390;
ei_local->block_input = &ax_block_input;
ei_local->block_output = &ax_block_output;
ei_local->get_8390_hdr = &ax_get_8390_hdr;
ei_local->priv = 0;
dev->netdev_ops = &ax_netdev_ops;
dev->ethtool_ops = &ax_ethtool_ops;
ax->msg_enable = NETIF_MSG_LINK;
ax->mii.phy_id_mask = 0x1f;
ax->mii.reg_num_mask = 0x1f;
ax->mii.phy_id = 0x10; /* onboard phy */
ax->mii.force_media = 0;
ax->mii.full_duplex = 0;
ax->mii.mdio_read = ax_phy_read;
ax->mii.mdio_write = ax_phy_write;
ax->mii.dev = dev;
ret = ax_mii_init(dev);
if (ret)
goto out_irq;
ax_NS8390_init(dev, 0);
if (first_init)
dev_info(&ax->dev->dev, "%dbit, irq %d, %lx, MAC: %pM\n",
ei_status.word16 ? 16:8, dev->irq, dev->base_addr,
dev->dev_addr);
ret = register_netdev(dev);
if (ret)
goto out_irq;
netdev_info(dev, "%dbit, irq %d, %lx, MAC: %pM\n",
ei_local->word16 ? 16 : 8, dev->irq, dev->base_addr,
dev->dev_addr);
return 0;
out_irq:
......@@ -802,24 +790,24 @@ static int ax_init_dev(struct net_device *dev, int first_init)
return ret;
}
static int ax_remove(struct platform_device *_dev)
static int ax_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(_dev);
struct ax_device *ax;
ax = to_ax_dev(dev);
struct net_device *dev = platform_get_drvdata(pdev);
struct ei_device *ei_local = netdev_priv(dev);
struct ax_device *ax = to_ax_dev(dev);
struct resource *mem;
unregister_netdev(dev);
free_irq(dev->irq, dev);
iounmap(ei_status.mem);
release_resource(ax->mem);
kfree(ax->mem);
iounmap(ei_local->mem);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(mem->start, resource_size(mem));
if (ax->map2) {
iounmap(ax->map2);
release_resource(ax->mem2);
kfree(ax->mem2);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
release_mem_region(mem->start, resource_size(mem));
}
free_netdev(dev);
......@@ -827,19 +815,20 @@ static int ax_remove(struct platform_device *_dev)
return 0;
}
/* ax_probe
/*
* ax_probe
*
* This is the entry point when the platform device system uses to
* notify us of a new device to attach to. Allocate memory, find
* the resources and information passed, and map the necessary registers.
*/
* notify us of a new device to attach to. Allocate memory, find the
* resources and information passed, and map the necessary registers.
*/
static int ax_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct ei_device *ei_local;
struct ax_device *ax;
struct resource *res;
size_t size;
struct resource *irq, *mem, *mem2;
resource_size_t mem_size, mem2_size = 0;
int ret = 0;
dev = ax__alloc_ei_netdev(sizeof(struct ax_device));
......@@ -847,120 +836,107 @@ static int ax_probe(struct platform_device *pdev)
return -ENOMEM;
/* ok, let's setup our device */
SET_NETDEV_DEV(dev, &pdev->dev);
ei_local = netdev_priv(dev);
ax = to_ax_dev(dev);
memset(ax, 0, sizeof(struct ax_device));
spin_lock_init(&ax->mii_lock);
ax->dev = pdev;
ax->plat = pdev->dev.platform_data;
platform_set_drvdata(pdev, dev);
ei_status.rxcr_base = ax->plat->rcr_val;
ei_local->rxcr_base = ax->plat->rcr_val;
/* find the platform resources */
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res == NULL) {
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq) {
dev_err(&pdev->dev, "no IRQ specified\n");
ret = -ENXIO;
goto exit_mem;
}
dev->irq = res->start;
ax->irqflags = res->flags & IRQF_TRIGGER_MASK;
dev->irq = irq->start;
ax->irqflags = irq->flags & IRQF_TRIGGER_MASK;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
dev_err(&pdev->dev, "no MEM specified\n");
ret = -ENXIO;
goto exit_mem;
}
size = (res->end - res->start) + 1;
/* setup the register offsets from either the platform data
* or by using the size of the resource provided */
mem_size = resource_size(mem);
/*
* setup the register offsets from either the platform data or
* by using the size of the resource provided
*/
if (ax->plat->reg_offsets)
ei_status.reg_offset = ax->plat->reg_offsets;
ei_local->reg_offset = ax->plat->reg_offsets;
else {
ei_status.reg_offset = ax->reg_offsets;
ei_local->reg_offset = ax->reg_offsets;
for (ret = 0; ret < 0x18; ret++)
ax->reg_offsets[ret] = (size / 0x18) * ret;
ax->reg_offsets[ret] = (mem_size / 0x18) * ret;
}
ax->mem = request_mem_region(res->start, size, pdev->name);
if (ax->mem == NULL) {
if (!request_mem_region(mem->start, mem_size, pdev->name)) {
dev_err(&pdev->dev, "cannot reserve registers\n");
ret = -ENXIO;
goto exit_mem;
}
ei_status.mem = ioremap(res->start, size);
dev->base_addr = (unsigned long)ei_status.mem;
ei_local->mem = ioremap(mem->start, mem_size);
dev->base_addr = (unsigned long)ei_local->mem;
if (ei_status.mem == NULL) {
dev_err(&pdev->dev, "Cannot ioremap area (%08llx,%08llx)\n",
(unsigned long long)res->start,
(unsigned long long)res->end);
if (ei_local->mem == NULL) {
dev_err(&pdev->dev, "Cannot ioremap area %pR\n", mem);
ret = -ENXIO;
goto exit_req;
}
/* look for reset area */
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (res == NULL) {
mem2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!mem2) {
if (!ax->plat->reg_offsets) {
for (ret = 0; ret < 0x20; ret++)
ax->reg_offsets[ret] = (size / 0x20) * ret;
ax->reg_offsets[ret] = (mem_size / 0x20) * ret;
}
ax->map2 = NULL;
} else {
size = (res->end - res->start) + 1;
mem2_size = resource_size(mem2);
ax->mem2 = request_mem_region(res->start, size, pdev->name);
if (ax->mem2 == NULL) {
if (!request_mem_region(mem2->start, mem2_size, pdev->name)) {
dev_err(&pdev->dev, "cannot reserve registers\n");
ret = -ENXIO;
goto exit_mem1;
}
ax->map2 = ioremap(res->start, size);
if (ax->map2 == NULL) {
ax->map2 = ioremap(mem2->start, mem2_size);
if (!ax->map2) {
dev_err(&pdev->dev, "cannot map reset register\n");
ret = -ENXIO;
goto exit_mem2;
}
ei_status.reg_offset[0x1f] = ax->map2 - ei_status.mem;
ei_local->reg_offset[0x1f] = ax->map2 - ei_local->mem;
}
/* got resources, now initialise and register device */
ret = ax_init_dev(dev, 1);
ret = ax_init_dev(dev);
if (!ret)
return 0;
if (ax->map2 == NULL)
if (!ax->map2)
goto exit_mem1;
iounmap(ax->map2);
exit_mem2:
release_resource(ax->mem2);
kfree(ax->mem2);
release_mem_region(mem2->start, mem2_size);
exit_mem1:
iounmap(ei_status.mem);
iounmap(ei_local->mem);
exit_req:
release_resource(ax->mem);
kfree(ax->mem);
release_mem_region(mem->start, mem_size);
exit_mem:
free_netdev(dev);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7