Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A bigger batch than I anticipated this week, for two reasons:

   - Some fallout on Davinci from board file -> DTB conversion, that
     also includes a few longer-standing fixes (i.e. not recent
     regressions).

   - drivers/reset material that has been in linux-next for a while, but
     didn't get sent to us until now for a variety of reasons
     (maintainer out sick, holidays, etc). There's a functional
     dependency in there such that one platform (Altera's SoCFPGA) won't
     boot without one of the patches; instead of reverting the patch
     that got merged, I looked at this set and decided it was small
     enough that I'll pick it up anyway. If you disagree I can revisit
     with a smaller set.

  That being said, there's also a handful of the usual stuff:

   - Fix for a crash on Armada 7K/8K when the kernel touches
     PSCI-reserved memory

   - Fix for PCIe reset on Macchiatobin (Armada 8K development board,
     what this email is sent from in fact :)

   - Enable a few new-merged modules for Amlogic in arm64 defconfig

   - Error path fixes on Integrator

   - Build fix for Renesas and Qualcomm

   - Initialization fix for Renesas RZ/G2E

  .. plus a few more fixlets"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  ARM: integrator: impd1: use struct_size() in devm_kzalloc()
  qcom-scm: Include <linux/err.h> header
  gpio: pl061: handle failed allocations
  ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  arm64: dts: marvell: mcbin: fix PCIe reset signal
  arm64: dts: marvell: armada-ap806: reserve PSCI area
  ARM: dts: da850-lcdk: Correct the sound card name
  ARM: dts: da850-lcdk: Correct the audio codec regulators
  ARM: dts: da850-evm: Correct the sound card name
  ARM: dts: da850-evm: Correct the audio codec regulators
  ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
  ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
  ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
  ARM: davinci: da850-evm: fix label names in GPIO lookup entries
  ARM: davinci: da830-evm: fix label names in GPIO lookup entries
  arm64: defconfig: enable modules for amlogic s400 sound card
  reset: uniphier-glue: Add AHCI reset control support in glue layer
  dt-bindings: reset: uniphier: Add AHCI core reset description
  reset: uniphier-usb3: Rename to reset-uniphier-glue
  dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
  ...

Documentation/devicetree/bindings/reset/socfpga-reset.txt

 Altera SOCFPGA Reset Manager
 
 Required properties:
-- compatible : "altr,rst-mgr"
+- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10)
+	       "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC
 - reg : Should contain 1 register ranges(address and length)
 - altr,modrst-offset : Should contain the offset of the first modrst register.
 - #reset-cells: 1

Documentation/devicetree/bindings/reset/uniphier-reset.txt

@@ -120,27 +120,30 @@ Example:
 	};
 
 
-USB3 core reset
----------------
+Peripheral core reset in glue layer
+-----------------------------------
 
-USB3 core reset belongs to USB3 glue layer. Before using the core reset,
-it is necessary to control the clocks and resets to enable this layer.
-These clocks and resets should be described in each property.
+Some peripheral core reset belongs to its own glue layer. Before using
+this core reset, it is necessary to control the clocks and resets to enable
+this layer. These clocks and resets should be described in each property.
 
 Required properties:
 - compatible: Should be
-    "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC
-    "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC
-    "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC
-    "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC
+    "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3
+    "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3
+    "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3
+    "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3
+    "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI
+    "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI
+    "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI
 - #reset-cells: Should be 1.
 - reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
+- clocks: A list of phandles to the clock gate for the glue layer.
 	According to the clock-names, appropriate clocks are required.
 - clock-names: Should contain
     "gio", "link" - for Pro4 SoC
     "link"        - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
+- resets: A list of phandles to the reset control for the glue layer.
 	According to the reset-names, appropriate resets are required.
 - reset-names: Should contain
     "gio", "link" - for Pro4 SoC

arch/arm/boot/dts/da850-evm.dts

@@ -94,6 +94,28 @@ vbat: fixedregulator0 {
 		regulator-boot-on;
 	};
 
+	baseboard_3v3: fixedregulator-3v3 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	baseboard_1v8: fixedregulator-1v8 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	backlight_lcd: backlight-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd_backlight_pwr";
@@ -105,7 +127,7 @@ backlight_lcd: backlight-regulator {
 
 	sound {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850/OMAP-L138 EVM";
+		simple-audio-card,name = "DA850-OMAPL138 EVM";
 		simple-audio-card,widgets =
 			"Line", "Line In",
 			"Line", "Line Out";
@@ -210,10 +232,9 @@ tlv320aic3106: tlv320aic3106@18 {
 
 		/* Regulators */
 		IOVDD-supply = <&vdcdc2_reg>;
-		/* Derived from VBAT: Baseboard 3.3V / 1.8V */
-		AVDD-supply = <&vbat>;
-		DRVDD-supply = <&vbat>;
-		DVDD-supply = <&vbat>;
+		AVDD-supply = <&baseboard_3v3>;
+		DRVDD-supply = <&baseboard_3v3>;
+		DVDD-supply = <&baseboard_1v8>;
 	};
 	tca6416: gpio@20 {
 		compatible = "ti,tca6416";

arch/arm/boot/dts/da850-lcdk.dts

@@ -39,9 +39,39 @@ dsp_memory_region: dsp-memory@c3000000 {
 		};
 	};
 
+	vcc_5vd: fixedregulator-vcc_5vd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5vd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vcc_3v3d: fixedregulator-vcc_3v3d {
+		/* TPS650250 - VDCDC1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3d";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5vd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_1v8d: fixedregulator-vcc_1v8d {
+		/* TPS650250 - VDCDC2 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8d";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_5vd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850/OMAP-L138 LCDK";
+		simple-audio-card,name = "DA850-OMAPL138 LCDK";
 		simple-audio-card,widgets =
 			"Line", "Line In",
 			"Line", "Line Out";
@@ -221,6 +251,12 @@ tlv320aic3106: tlv320aic3106@18 {
 		compatible = "ti,tlv320aic3106";
 		reg = <0x18>;
 		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&vcc_3v3d>;
+		AVDD-supply = <&vcc_3v3d>;
+		DRVDD-supply = <&vcc_3v3d>;
+		DVDD-supply = <&vcc_1v8d>;
 	};
 };
 

arch/arm/boot/dts/kirkwood-dnskw.dtsi

@@ -36,8 +36,8 @@ gpio_fan {
 		compatible = "gpio-fan";
 		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
 		pinctrl-names = "default";
-		gpios = <&gpio1 14 GPIO_ACTIVE_LOW
-			 &gpio1 13 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
+			 &gpio1 13 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0    0
 				      3000 1
 				      6000 2>;

arch/arm/mach-davinci/board-da830-evm.c

@@ -208,9 +208,9 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 	.dev_id = "da830-mmc.0",
 	.table = {
 		/* gpio chip 1 contains gpio range 32-63 */
-		GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_CD_PIN, "cd",
+		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_CD_PIN, "cd",
 			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_WP_PIN, "wp",
+		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_LOW),
 	},
 };

arch/arm/mach-davinci/board-da850-evm.c

@@ -805,9 +805,9 @@ static struct gpiod_lookup_table mmc_gpios_table = {
 	.dev_id = "da830-mmc.0",
 	.table = {
 		/* gpio chip 2 contains gpio range 64-95 */
-		GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd",
+		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_CD_PIN, "cd",
 			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp",
+		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_HIGH),
 	},
 };

arch/arm/mach-davinci/board-dm355-evm.c

@@ -117,9 +117,9 @@ static struct platform_device davinci_nand_device = {
 static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 	.dev_id = "i2c_davinci.1",
 	.table = {
-		GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SDA_PIN, "sda",
+		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SDA_PIN, "sda",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SCL_PIN, "scl",
+		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 	},
 };

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -660,9 +660,9 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
 	.dev_id = "i2c_davinci.1",
 	.table = {
-		GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SDA_PIN, "sda",
+		GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SDA_PIN, "sda",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SCL_PIN, "scl",
+		GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl",
 			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
 	},
 };

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -134,9 +134,9 @@ static const short hawk_mmcsd0_pins[] = {
 static struct gpiod_lookup_table mmc_gpios_table = {
 	.dev_id = "da830-mmc.0",
 	.table = {
-		GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_CD_PIN, "cd",
+		GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_CD_PIN, "cd",
 			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_WP_PIN, "wp",
+		GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_WP_PIN, "wp",
 			    GPIO_ACTIVE_LOW),
 	},
 };

arch/arm/mach-integrator/impd1.c

@@ -390,10 +390,14 @@ static int __ref impd1_probe(struct lm_device *dev)
 			char *mmciname;
 
 			lookup = devm_kzalloc(&dev->dev,
-					      sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup),
+					      struct_size(lookup, table, 3),
 					      GFP_KERNEL);
 			chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL);
-			mmciname = kasprintf(GFP_KERNEL, "lm%x:00700", dev->id);
+			mmciname = devm_kasprintf(&dev->dev, GFP_KERNEL,
+						  "lm%x:00700", dev->id);
+			if (!lookup || !chipname || !mmciname)
+				return -ENOMEM;
+
 			lookup->dev_id = mmciname;
 			/*
 			 * Offsets on GPIO block 1:

arch/arm/mach-socfpga/socfpga.c

@@ -32,6 +32,8 @@ void __iomem *rst_manager_base_addr;
 void __iomem *sdr_ctl_base_addr;
 unsigned long socfpga_cpu1start_addr;
 
+extern void __init socfpga_reset_init(void);
+
 static void __init socfpga_sysmgr_init(void)
 {
 	struct device_node *np;
@@ -64,6 +66,7 @@ static void __init socfpga_init_irq(void)
 
 	if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
 		socfpga_init_ocram_ecc();
+	socfpga_reset_init();
 }
 
 static void __init socfpga_arria10_init_irq(void)
@@ -74,6 +77,7 @@ static void __init socfpga_arria10_init_irq(void)
 		socfpga_init_arria10_l2_ecc();
 	if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
 		socfpga_init_arria10_ocram_ecc();
+	socfpga_reset_init();
 }
 
 static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)

arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi

@@ -183,7 +183,7 @@ &cp0_pcie0 {
 	pinctrl-0 = <&cp0_pcie_pins>;
 	num-lanes = <4>;
 	num-viewport = <8>;
-	reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -28,6 +28,23 @@ psci {
 		method = "smc";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * This area matches the mapping done with a
+		 * mainline U-Boot, and should be updated by the
+		 * bootloader.
+		 */
+
+		psci-area@4000000 {
+			reg = <0x0 0x4000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
 	ap806 {
 		#address-cells = <2>;
 		#size-cells = <2>;

arch/arm64/configs/defconfig

@@ -506,11 +506,15 @@ CONFIG_SND_SOC_ROCKCHIP=m
 CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
 CONFIG_SND_SOC_ROCKCHIP_RT5645=m
 CONFIG_SND_SOC_RK3399_GRU_SOUND=m
+CONFIG_SND_MESON_AXG_SOUND_CARD=m
 CONFIG_SND_SOC_SAMSUNG=y
 CONFIG_SND_SOC_RCAR=m
 CONFIG_SND_SOC_AK4613=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
+CONFIG_SND_SOC_ES7134=m
+CONFIG_SND_SOC_ES7241=m
+CONFIG_SND_SOC_TAS571X=m
 CONFIG_I2C_HID=m
 CONFIG_USB=y
 CONFIG_USB_OTG=y

drivers/reset/Kconfig

@@ -109,7 +109,7 @@ config RESET_QCOM_PDC
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST
-	default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
+	default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
 	help
 	  This enables a simple reset controller driver for reset lines that
 	  that can be asserted and deasserted by toggling bits in a contiguous,
@@ -128,6 +128,14 @@ config RESET_STM32MP157
 	help
 	  This enables the RCC reset controller driver for STM32 MPUs.
 
+config RESET_SOCFPGA
+	bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA
+	default ARCH_SOCFPGA
+	select RESET_SIMPLE
+	help
+	  This enables the reset driver for the SoCFPGA ARMv7 platforms. This
+	  driver gets initialized early during platform init calls.
+
 config RESET_SUNXI
 	bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
 	default ARCH_SUNXI
@@ -163,15 +171,15 @@ config RESET_UNIPHIER
 	  Say Y if you want to control reset signals provided by System Control
 	  block, Media I/O block, Peripheral Block.
 
-config RESET_UNIPHIER_USB3
-	tristate "USB3 reset driver for UniPhier SoCs"
+config RESET_UNIPHIER_GLUE
+	tristate "Reset driver in glue layer for UniPhier SoCs"
 	depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
 	default ARCH_UNIPHIER
 	select RESET_SIMPLE
 	help
-	  Support for the USB3 core reset on UniPhier SoCs.
-	  Say Y if you want to control reset signals provided by
-	  USB3 glue layer.
+	  Support for peripheral core reset included in its own glue layer
+	  on UniPhier SoCs. Say Y if you want to control reset signals
+	  provided by the glue layer.
 
 config RESET_ZYNQ
 	bool "ZYNQ Reset Driver" if COMPILE_TEST

drivers/reset/Makefile

@@ -19,10 +19,11 @@ obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
 obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
 obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
 obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
+obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
 obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
-obj-$(CONFIG_RESET_UNIPHIER_USB3) += reset-uniphier-usb3.o
+obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
 

drivers/reset/core.c

@@ -795,3 +795,45 @@ devm_reset_control_array_get(struct device *dev, bool shared, bool optional)
 	return rstc;
 }
 EXPORT_SYMBOL_GPL(devm_reset_control_array_get);
+
+static int reset_control_get_count_from_lookup(struct device *dev)
+{
+	const struct reset_control_lookup *lookup;
+	const char *dev_id;
+	int count = 0;
+
+	if (!dev)
+		return -EINVAL;
+
+	dev_id = dev_name(dev);
+	mutex_lock(&reset_lookup_mutex);
+
+	list_for_each_entry(lookup, &reset_lookup_list, list) {
+		if (!strcmp(lookup->dev_id, dev_id))
+			count++;
+	}
+
+	mutex_unlock(&reset_lookup_mutex);
+
+	if (count == 0)
+		count = -ENOENT;
+
+	return count;
+}
+
+/**
+ * reset_control_get_count - Count number of resets available with a device
+ *
+ * @dev: device for which to return the number of resets
+ *
+ * Returns positive reset count on success, or error number on failure and
+ * on count being zero.
+ */
+int reset_control_get_count(struct device *dev)
+{
+	if (dev->of_node)
+		return of_reset_control_get_count(dev->of_node);
+
+	return reset_control_get_count_from_lookup(dev);
+}
+EXPORT_SYMBOL_GPL(reset_control_get_count);

drivers/reset/reset-hsdk.c

@@ -86,6 +86,7 @@ static int hsdk_reset_reset(struct reset_controller_dev *rcdev,
 
 static const struct reset_control_ops hsdk_reset_ops = {
 	.reset	= hsdk_reset_reset,
+	.deassert = hsdk_reset_reset,
 };
 
 static int hsdk_reset_probe(struct platform_device *pdev)

drivers/reset/reset-simple.c

@@ -109,7 +109,7 @@ struct reset_simple_devdata {
 #define SOCFPGA_NR_BANKS	8
 
 static const struct reset_simple_devdata reset_simple_socfpga = {
-	.reg_offset = 0x10,
+	.reg_offset = 0x20,
 	.nr_resets = SOCFPGA_NR_BANKS * 32,
 	.status_active_low = true,
 };
@@ -120,7 +120,8 @@ static const struct reset_simple_devdata reset_simple_active_low = {
 };
 
 static const struct of_device_id reset_simple_dt_ids[] = {
-	{ .compatible = "altr,rst-mgr", .data = &reset_simple_socfpga },
+	{ .compatible = "altr,stratix10-rst-mgr",
+		.data = &reset_simple_socfpga },
 	{ .compatible = "st,stm32-rcc", },
 	{ .compatible = "allwinner,sun6i-a31-clock-reset",
 		.data = &reset_simple_active_low },
@@ -166,14 +167,6 @@ static int reset_simple_probe(struct platform_device *pdev)
 		data->status_active_low = devdata->status_active_low;
 	}
 
-	if (of_device_is_compatible(dev->of_node, "altr,rst-mgr") &&
-	    of_property_read_u32(dev->of_node, "altr,modrst-offset",
-				 &reg_offset)) {
-		dev_warn(dev,
-			 "missing altr,modrst-offset property, assuming 0x%x!\n",
-			 reg_offset);
-	}
-
 	data->membase += reg_offset;
 
 	return devm_reset_controller_register(dev, &data->rcdev);

drivers/reset/reset-socfpga.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018, Intel Corporation
+ * Copied from reset-sunxi.c
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include "reset-simple.h"
+
+#define SOCFPGA_NR_BANKS	8
+void __init socfpga_reset_init(void);
+
+static int a10_reset_init(struct device_node *np)
+{
+	struct reset_simple_data *data;
+	struct resource res;
+	resource_size_t size;
+	int ret;
+	u32 reg_offset = 0x10;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		goto err_alloc;
+
+	size = resource_size(&res);
+	if (!request_mem_region(res.start, size, np->name)) {
+		ret = -EBUSY;
+		goto err_alloc;
+	}
+
+	data->membase = ioremap(res.start, size);
+	if (!data->membase) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	if (of_property_read_u32(np, "altr,modrst-offset", &reg_offset))
+		pr_warn("missing altr,modrst-offset property, assuming 0x10\n");
+	data->membase += reg_offset;
+
+	spin_lock_init(&data->lock);
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = SOCFPGA_NR_BANKS * 32;
+	data->rcdev.ops = &reset_simple_ops;
+	data->rcdev.of_node = np;
+	data->status_active_low = true;
+
+	return reset_controller_register(&data->rcdev);
+
+err_alloc:
+	kfree(data);
+	return ret;
+};
+
+/*
+ * These are the reset controller we need to initialize early on in
+ * our system, before we can even think of using a regular device
+ * driver for it.
+ * The controllers that we can register through the regular device
+ * model are handled by the simple reset driver directly.
+ */
+static const struct of_device_id socfpga_early_reset_dt_ids[] __initconst = {
+	{ .compatible = "altr,rst-mgr", },
+	{ /* sentinel */ },
+};
+
+void __init socfpga_reset_init(void)
+{
+	struct device_node *np;
+
+	for_each_matching_node(np, socfpga_early_reset_dt_ids)
+		a10_reset_init(np);
+}

drivers/reset/reset-uniphier-usb3.c → drivers/reset/reset-uniphier-glue.c

 // SPDX-License-Identifier: GPL-2.0
 //
-// reset-uniphier-usb3.c - USB3 reset driver for UniPhier
+// reset-uniphier-glue.c - Glue layer reset driver for UniPhier
 // Copyright 2018 Socionext Inc.
 // Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
 
@@ -15,24 +15,24 @@
 #define MAX_CLKS	2
 #define MAX_RSTS	2
 
-struct uniphier_usb3_reset_soc_data {
+struct uniphier_glue_reset_soc_data {
 	int nclks;
 	const char * const *clock_names;
 	int nrsts;
 	const char * const *reset_names;
 };
 
-struct uniphier_usb3_reset_priv {
+struct uniphier_glue_reset_priv {
 	struct clk_bulk_data clk[MAX_CLKS];
 	struct reset_control *rst[MAX_RSTS];
 	struct reset_simple_data rdata;
-	const struct uniphier_usb3_reset_soc_data *data;
+	const struct uniphier_glue_reset_soc_data *data;
 };
 
-static int uniphier_usb3_reset_probe(struct platform_device *pdev)
+static int uniphier_glue_reset_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct uniphier_usb3_reset_priv *priv;
+	struct uniphier_glue_reset_priv *priv;
 	struct resource *res;
 	resource_size_t size;
 	const char *name;
@@ -100,9 +100,9 @@ static int uniphier_usb3_reset_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int uniphier_usb3_reset_remove(struct platform_device *pdev)
+static int uniphier_glue_reset_remove(struct platform_device *pdev)
 {
-	struct uniphier_usb3_reset_priv *priv = platform_get_drvdata(pdev);
+	struct uniphier_glue_reset_priv *priv = platform_get_drvdata(pdev);
 	int i;
 
 	for (i = 0; i < priv->data->nrsts; i++)
@@ -117,7 +117,7 @@ static const char * const uniphier_pro4_clock_reset_names[] = {
 	"gio", "link",
 };
 
-static const struct uniphier_usb3_reset_soc_data uniphier_pro4_data = {
+static const struct uniphier_glue_reset_soc_data uniphier_pro4_data = {
 	.nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
 	.clock_names = uniphier_pro4_clock_reset_names,
 	.nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
@@ -128,14 +128,14 @@ static const char * const uniphier_pxs2_clock_reset_names[] = {
 	"link",
 };
 
-static const struct uniphier_usb3_reset_soc_data uniphier_pxs2_data = {
+static const struct uniphier_glue_reset_soc_data uniphier_pxs2_data = {
 	.nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
 	.clock_names = uniphier_pxs2_clock_reset_names,
 	.nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
 	.reset_names = uniphier_pxs2_clock_reset_names,
 };
 
-static const struct of_device_id uniphier_usb3_reset_match[] = {
+static const struct of_device_id uniphier_glue_reset_match[] = {
 	{
 		.compatible = "socionext,uniphier-pro4-usb3-reset",
 		.data = &uniphier_pro4_data,
@@ -152,20 +152,32 @@ static const struct of_device_id uniphier_usb3_reset_match[] = {
 		.compatible = "socionext,uniphier-pxs3-usb3-reset",
 		.data = &uniphier_pxs2_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pro4-ahci-reset",
+		.data = &uniphier_pro4_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-ahci-reset",
+		.data = &uniphier_pxs2_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-ahci-reset",
+		.data = &uniphier_pxs2_data,
+	},
 	{ /* Sentinel */ }
 };
-MODULE_DEVICE_TABLE(of, uniphier_usb3_reset_match);
+MODULE_DEVICE_TABLE(of, uniphier_glue_reset_match);
 
-static struct platform_driver uniphier_usb3_reset_driver = {
-	.probe = uniphier_usb3_reset_probe,
-	.remove = uniphier_usb3_reset_remove,
+static struct platform_driver uniphier_glue_reset_driver = {
+	.probe = uniphier_glue_reset_probe,
+	.remove = uniphier_glue_reset_remove,
 	.driver = {
-		.name = "uniphier-usb3-reset",
-		.of_match_table = uniphier_usb3_reset_match,
+		.name = "uniphier-glue-reset",
+		.of_match_table = uniphier_glue_reset_match,
 	},
 };
-module_platform_driver(uniphier_usb3_reset_driver);
+module_platform_driver(uniphier_glue_reset_driver);
 
 MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
-MODULE_DESCRIPTION("UniPhier USB3 Reset Driver");
+MODULE_DESCRIPTION("UniPhier Glue layer reset driver");
 MODULE_LICENSE("GPL");

drivers/soc/renesas/Kconfig

@@ -44,7 +44,7 @@ config ARCH_RZN1
 	bool
 	select ARM_AMBA
 
-if ARM
+if ARM && ARCH_RENESAS
 
 #comment "Renesas ARM SoCs System Type"
 

drivers/soc/renesas/r8a774c0-sysc.c

@@ -28,19 +28,6 @@ static struct rcar_sysc_area r8a774c0_areas[] __initdata = {
 	{ "3dg-b",	0x100, 1, R8A774C0_PD_3DG_B,	R8A774C0_PD_3DG_A },
 };
 
-static void __init rcar_sysc_fix_parent(struct rcar_sysc_area *areas,
-					unsigned int num_areas, u8 id,
-					int new_parent)
-{
-	unsigned int i;
-
-	for (i = 0; i < num_areas; i++)
-		if (areas[i].isr_bit == id) {
-			areas[i].parent = new_parent;
-			return;
-		}
-}
-
 /* Fixups for RZ/G2E ES1.0 revision */
 static const struct soc_device_attribute r8a774c0[] __initconst = {
 	{ .soc_id = "r8a774c0", .revision = "ES1.0" },
@@ -50,12 +37,10 @@ static const struct soc_device_attribute r8a774c0[] __initconst = {
 static int __init r8a774c0_sysc_init(void)
 {
 	if (soc_device_match(r8a774c0)) {
-		rcar_sysc_fix_parent(r8a774c0_areas,
-				     ARRAY_SIZE(r8a774c0_areas),
-				     R8A774C0_PD_3DG_A, R8A774C0_PD_3DG_B);
-		rcar_sysc_fix_parent(r8a774c0_areas,
-				     ARRAY_SIZE(r8a774c0_areas),
-				     R8A774C0_PD_3DG_B, R8A774C0_PD_ALWAYS_ON);
+		/* Fix incorrect 3DG hierarchy */
+		swap(r8a774c0_areas[6], r8a774c0_areas[7]);
+		r8a774c0_areas[6].parent = R8A774C0_PD_ALWAYS_ON;
+		r8a774c0_areas[7].parent = R8A774C0_PD_3DG_B;
 	}
 
 	return 0;

include/linux/qcom_scm.h

@@ -13,6 +13,7 @@
 #ifndef __QCOM_SCM_H
 #define __QCOM_SCM_H
 
+#include <linux/err.h>
 #include <linux/types.h>
 #include <linux/cpumask.h>
 

include/linux/reset.h

@@ -32,6 +32,8 @@ struct reset_control *devm_reset_control_array_get(struct device *dev,
 struct reset_control *of_reset_control_array_get(struct device_node *np,
 						 bool shared, bool optional);
 
+int reset_control_get_count(struct device *dev);
+
 #else
 
 static inline int reset_control_reset(struct reset_control *rstc)
@@ -97,6 +99,11 @@ of_reset_control_array_get(struct device_node *np, bool shared, bool optional)
 	return optional ? NULL : ERR_PTR(-ENOTSUPP);
 }
 
+static inline int reset_control_get_count(struct device *dev)
+{
+	return -ENOENT;
+}
+
 #endif /* CONFIG_RESET_CONTROLLER */
 
 static inline int __must_check device_reset(struct device *dev)
@@ -138,7 +145,7 @@ __must_check reset_control_get_exclusive(struct device *dev, const char *id)
  *
  * Returns a struct reset_control or IS_ERR() condition containing errno.
  * This function is intended for use with reset-controls which are shared
- * between hardware-blocks.
+ * between hardware blocks.
  *
  * When a reset-control is shared, the behavior of reset_control_assert /
  * deassert is changed, the reset-core will keep track of a deassert_count
@@ -187,7 +194,7 @@ static inline struct reset_control *of_reset_control_get_exclusive(
 }
 
 /**
- * of_reset_control_get_shared - Lookup and obtain an shared reference
+ * of_reset_control_get_shared - Lookup and obtain a shared reference
  *                               to a reset controller.
  * @node: device to be reset by the controller
  * @id: reset line name
@@ -229,7 +236,7 @@ static inline struct reset_control *of_reset_control_get_exclusive_by_index(
 }
 
 /**
- * of_reset_control_get_shared_by_index - Lookup and obtain an shared
+ * of_reset_control_get_shared_by_index - Lookup and obtain a shared
  *                                        reference to a reset controller
  *                                        by index.
  * @node: device to be reset by the controller
@@ -322,7 +329,7 @@ devm_reset_control_get_exclusive_by_index(struct device *dev, int index)
 
 /**
  * devm_reset_control_get_shared_by_index - resource managed
- * reset_control_get_shared
+ *                                          reset_control_get_shared
  * @dev: device to be reset by the controller
  * @index: index of the reset controller
  *