Skip to content

L
linux
Commit dc22246b authored by Jeff Garzik's avatar Jeff Garzik
Browse files
Options

Merge redhat.com:/spare/repo/linux-2.5 

into redhat.com:/spare/repo/libata-2.5
parents e88141bd 17049ac0
Show whitespace changes
Inline Side-by-side
Showing with 478 additions and 29 deletions
drivers/scsi/Kconfig
View file @ dc22246b
......@@ -438,6 +438,14 @@ config SCSI_SATA_VIA
If unsure, say N.
config SCSI_SATA_VITESSE
tristate "VITESSE VSC-7174 SATA support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for Vitesse VSC7174 Serial ATA.
If unsure, say N.
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
depends on (PCI || ISA || MCA) && SCSI
......
drivers/scsi/Makefile
View file @ dc22246b
......@@ -114,6 +114,7 @@ obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
obj-$(CONFIG_ARM) += arm/
......
drivers/scsi/libata-core.c
View file @ dc22246b
......@@ -141,7 +141,7 @@ void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf)
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
outb(tf->hob_feature, ioaddr->error_addr);
outb(tf->hob_feature, ioaddr->feature_addr);
outb(tf->hob_nsect, ioaddr->nsect_addr);
outb(tf->hob_lbal, ioaddr->lbal_addr);
outb(tf->hob_lbam, ioaddr->lbam_addr);
......@@ -155,7 +155,7 @@ void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf)
}
if (is_addr) {
outb(tf->feature, ioaddr->error_addr);
outb(tf->feature, ioaddr->feature_addr);
outb(tf->nsect, ioaddr->nsect_addr);
outb(tf->lbal, ioaddr->lbal_addr);
outb(tf->lbam, ioaddr->lbam_addr);
......@@ -199,7 +199,7 @@ void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
writeb(tf->hob_feature, (void *) ioaddr->error_addr);
writeb(tf->hob_feature, (void *) ioaddr->feature_addr);
writeb(tf->hob_nsect, (void *) ioaddr->nsect_addr);
writeb(tf->hob_lbal, (void *) ioaddr->lbal_addr);
writeb(tf->hob_lbam, (void *) ioaddr->lbam_addr);
......@@ -213,7 +213,7 @@ void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
}
if (is_addr) {
writeb(tf->feature, (void *) ioaddr->error_addr);
writeb(tf->feature, (void *) ioaddr->feature_addr);
writeb(tf->nsect, (void *) ioaddr->nsect_addr);
writeb(tf->lbal, (void *) ioaddr->lbal_addr);
writeb(tf->lbam, (void *) ioaddr->lbam_addr);
......@@ -250,7 +250,7 @@ void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf)
{
DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
outb(tf->command, ap->ioaddr.cmdstat_addr);
outb(tf->command, ap->ioaddr.command_addr);
ata_pause(ap);
}
......@@ -271,7 +271,7 @@ void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
{
DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
writeb(tf->command, (void *) ap->ioaddr.cmdstat_addr);
writeb(tf->command, (void *) ap->ioaddr.command_addr);
ata_pause(ap);
}
......@@ -417,7 +417,7 @@ void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
*/
u8 ata_check_status_pio(struct ata_port *ap)
{
return inb(ap->ioaddr.cmdstat_addr);
return inb(ap->ioaddr.status_addr);
}
/**
......@@ -433,7 +433,7 @@ u8 ata_check_status_pio(struct ata_port *ap)
*/
u8 ata_check_status_mmio(struct ata_port *ap)
{
return readb((void *) ap->ioaddr.cmdstat_addr);
return readb((void *) ap->ioaddr.status_addr);
}
static const char * udma_str[] = {
......@@ -1346,12 +1346,6 @@ void ata_bus_reset(struct ata_port *ap)
DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no);
/* set up device control */
if (ap->flags & ATA_FLAG_MMIO)
writeb(ap->ctl, ioaddr->ctl_addr);
else
outb(ap->ctl, ioaddr->ctl_addr);
/* determine if device 0/1 are present */
if (ap->flags & ATA_FLAG_SATA_RESET)
dev0 = 1;
......@@ -1372,8 +1366,14 @@ void ata_bus_reset(struct ata_port *ap)
/* issue bus reset */
if (ap->flags & ATA_FLAG_SRST)
rc = ata_bus_softreset(ap, devmask);
else if ((ap->flags & ATA_FLAG_SATA_RESET) == 0)
else if ((ap->flags & ATA_FLAG_SATA_RESET) == 0) {
/* set up device control */
if (ap->flags & ATA_FLAG_MMIO)
writeb(ap->ctl, ioaddr->ctl_addr);
else
outb(ap->ctl, ioaddr->ctl_addr);
rc = ata_bus_edd(ap);
}
if (rc)
goto err_out;
......@@ -1399,6 +1399,14 @@ void ata_bus_reset(struct ata_port *ap)
(ap->device[1].class == ATA_DEV_NONE))
goto err_out;
if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
/* set up device control for ATA_FLAG_SATA_RESET */
if (ap->flags & ATA_FLAG_MMIO)
writeb(ap->ctl, ioaddr->ctl_addr);
else
outb(ap->ctl, ioaddr->ctl_addr);
}
DPRINTK("EXIT\n");
return;
......@@ -2369,7 +2377,7 @@ static void ata_dma_complete(struct ata_port *ap, u8 host_stat,
* One if interrupt was handled, zero if not (shared irq).
*/
static inline unsigned int ata_host_intr (struct ata_port *ap,
inline unsigned int ata_host_intr (struct ata_port *ap,
struct ata_queued_cmd *qc)
{
u8 status, host_stat;
......@@ -2728,7 +2736,7 @@ int ata_port_start (struct ata_port *ap)
if (!ap->prd)
return -ENOMEM;
DPRINTK("prd alloc, virt %p, dma %x\n", ap->prd, ap->prd_dma);
DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd, (unsigned long long) ap->prd_dma);
return 0;
}
......@@ -3026,12 +3034,14 @@ void ata_std_ports(struct ata_ioports *ioaddr)
{
ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE;
ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT;
ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL;
ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM;
ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH;
ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE;
ioaddr->cmdstat_addr = ioaddr->cmd_addr + ATA_REG_CMD;
ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
}
/**
......@@ -3153,12 +3163,14 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
if (legacy_mode) {
probe_ent->port[0].cmd_addr = 0x1f0;
probe_ent->port[0].altstatus_addr =
probe_ent->port[0].ctl_addr = 0x3f6;
probe_ent->n_ports = 1;
probe_ent->irq = 14;
ata_std_ports(&probe_ent->port[0]);
probe_ent2->port[0].cmd_addr = 0x170;
probe_ent2->port[0].altstatus_addr =
probe_ent2->port[0].ctl_addr = 0x376;
probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8;
probe_ent2->n_ports = 1;
......@@ -3173,11 +3185,13 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
} else {
probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0);
ata_std_ports(&probe_ent->port[0]);
probe_ent->port[0].altstatus_addr =
probe_ent->port[0].ctl_addr =
pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2);
ata_std_ports(&probe_ent->port[1]);
probe_ent->port[1].altstatus_addr =
probe_ent->port[1].ctl_addr =
pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
probe_ent->port[1].bmdma_addr = pci_resource_start(pdev, 4) + 8;
......@@ -3367,4 +3381,4 @@ EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_error);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_release);
EXPORT_SYMBOL_GPL(ata_host_intr);
drivers/scsi/sata_promise.c
View file @ dc22246b
......@@ -1172,13 +1172,16 @@ static void pdc_sata_setup_port(struct ata_ioports *port, unsigned long base)
{
port->cmd_addr = base;
port->data_addr = base;
port->feature_addr =
port->error_addr = base + 0x4;
port->nsect_addr = base + 0x8;
port->lbal_addr = base + 0xc;
port->lbam_addr = base + 0x10;
port->lbah_addr = base + 0x14;
port->device_addr = base + 0x18;
port->cmdstat_addr = base + 0x1c;
port->command_addr =
port->status_addr = base + 0x1c;
port->altstatus_addr =
port->ctl_addr = base + 0x38;
}
......
drivers/scsi/sata_sil.c
View file @ dc22246b
......@@ -360,12 +360,14 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
base = (unsigned long) mmio_base;
probe_ent->port[0].cmd_addr = base + SIL_IDE0_TF;
probe_ent->port[0].altstatus_addr =
probe_ent->port[0].ctl_addr = base + SIL_IDE0_CTL;
probe_ent->port[0].bmdma_addr = base + SIL_IDE0_BMDMA;
probe_ent->port[0].scr_addr = base + SIL_IDE0_SCR;
ata_std_ports(&probe_ent->port[0]);
probe_ent->port[1].cmd_addr = base + SIL_IDE1_TF;
probe_ent->port[1].altstatus_addr =
probe_ent->port[1].ctl_addr = base + SIL_IDE1_CTL;
probe_ent->port[1].bmdma_addr = base + SIL_IDE1_BMDMA;
probe_ent->port[1].scr_addr = base + SIL_IDE1_SCR;
......@@ -373,12 +375,14 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (ent->driver_data == sil_3114) {
probe_ent->port[2].cmd_addr = base + SIL_IDE2_TF;
probe_ent->port[2].altstatus_addr =
probe_ent->port[2].ctl_addr = base + SIL_IDE2_CTL;
probe_ent->port[2].bmdma_addr = base + SIL_IDE2_BMDMA;
probe_ent->port[2].scr_addr = base + SIL_IDE2_SCR;
ata_std_ports(&probe_ent->port[2]);
probe_ent->port[3].cmd_addr = base + SIL_IDE3_TF;
probe_ent->port[3].altstatus_addr =
probe_ent->port[3].ctl_addr = base + SIL_IDE3_CTL;
probe_ent->port[3].bmdma_addr = base + SIL_IDE3_BMDMA;
probe_ent->port[3].scr_addr = base + SIL_IDE3_SCR;
......
drivers/scsi/sata_svw.c
View file @ dc22246b
......@@ -103,13 +103,13 @@ static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
ata_wait_idle(ap);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->error_addr);
writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
} else if (is_addr) {
writew(tf->feature, ioaddr->error_addr);
writew(tf->feature, ioaddr->feature_addr);
writew(tf->nsect, ioaddr->nsect_addr);
writew(tf->lbal, ioaddr->lbal_addr);
writew(tf->lbam, ioaddr->lbam_addr);
......@@ -146,7 +146,7 @@ static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
static u8 k2_stat_check_status(struct ata_port *ap)
{
return readl((void *) ap->ioaddr.cmdstat_addr);
return readl((void *) ap->ioaddr.status_addr);
}
static void k2_sata_set_piomode (struct ata_port *ap, struct ata_device *adev,
......@@ -261,13 +261,16 @@ static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
{
port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET;
port->data_addr = base + K2_SATA_TF_DATA_OFFSET;
port->feature_addr =
port->error_addr = base + K2_SATA_TF_ERROR_OFFSET;
port->nsect_addr = base + K2_SATA_TF_NSECT_OFFSET;
port->lbal_addr = base + K2_SATA_TF_LBAL_OFFSET;
port->lbam_addr = base + K2_SATA_TF_LBAM_OFFSET;
port->lbah_addr = base + K2_SATA_TF_LBAH_OFFSET;
port->device_addr = base + K2_SATA_TF_DEVICE_OFFSET;
port->cmdstat_addr = base + K2_SATA_TF_CMDSTAT_OFFSET;
port->command_addr =
port->status_addr = base + K2_SATA_TF_CMDSTAT_OFFSET;
port->altstatus_addr =
port->ctl_addr = base + K2_SATA_TF_CTL_OFFSET;
port->bmdma_addr = base + K2_SATA_DMA_CMD_OFFSET;
port->scr_addr = base + K2_SATA_SCR_STATUS_OFFSET;
......
drivers/scsi/sata_vsc.c 0 → 100644
View file @ dc22246b
/*
* sata_vsc.c - Vitesse VSC7174 4 port DPA SATA
*
* Copyright 2004 SGI
*
* Bits from Jeff Garzik, Copyright RedHat, Inc.
*
* The contents of this file are subject to the Open
* Software License version 1.1 that can be found at
* http://www.opensource.org/licenses/osl-1.1.txt and is included herein
* by reference.
*
* Alternatively, the contents of this file may be used under the terms
* of the GNU General Public License version 2 (the "GPL") as distributed
* in the kernel source COPYING file, in which case the provisions of
* the GPL are applicable instead of the above. If you wish to allow
* the use of your version of this file only under the terms of the
* GPL and not to allow others to use your version of this file under
* the OSL, indicate your decision by deleting the provisions above and
* replace them with the notice and other provisions required by the GPL.
* If you do not delete the provisions above, a recipient may use your
* version of this file under either the OSL or the GPL.
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "scsi.h"
#include "hosts.h"
#include <linux/libata.h>
#define DRV_NAME "sata_vsc"
#define DRV_VERSION "0.01"
/* Interrupt register offsets (from chip base address) */
#define VSC_SATA_INT_STAT_OFFSET 0x00
#define VSC_SATA_INT_MASK_OFFSET 0x04
/* Taskfile registers offsets */
#define VSC_SATA_TF_CMD_OFFSET 0x00
#define VSC_SATA_TF_DATA_OFFSET 0x00
#define VSC_SATA_TF_ERROR_OFFSET 0x04
#define VSC_SATA_TF_FEATURE_OFFSET 0x06
#define VSC_SATA_TF_NSECT_OFFSET 0x08
#define VSC_SATA_TF_LBAL_OFFSET 0x0c
#define VSC_SATA_TF_LBAM_OFFSET 0x10
#define VSC_SATA_TF_LBAH_OFFSET 0x14
#define VSC_SATA_TF_DEVICE_OFFSET 0x18
#define VSC_SATA_TF_STATUS_OFFSET 0x1c
#define VSC_SATA_TF_COMMAND_OFFSET 0x1d
#define VSC_SATA_TF_ALTSTATUS_OFFSET 0x28
#define VSC_SATA_TF_CTL_OFFSET 0x29
/* DMA base */
#define VSC_SATA_DMA_CMD_OFFSET 0x70
/* SCRs base */
#define VSC_SATA_SCR_STATUS_OFFSET 0x100
#define VSC_SATA_SCR_ERROR_OFFSET 0x104
#define VSC_SATA_SCR_CONTROL_OFFSET 0x108
/* Port stride */
#define VSC_SATA_PORT_OFFSET 0x200
static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
u32 val)
{
if (sc_reg > SCR_CONTROL)
return;
writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
{
unsigned long mask_addr;
u8 mask;
mask_addr = (unsigned long) ap->host_set->mmio_base +
VSC_SATA_INT_MASK_OFFSET + ap->port_no;
mask = readb(mask_addr);
if (ctl & ATA_NIEN)
mask |= 0x80;
else
mask &= 0x7F;
writeb(mask, mask_addr);
}
static void vsc_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
/*
* The only thing the ctl register is used for is SRST.
* That is not enabled or disabled via tf_load.
* However, if ATA_NIEN is changed, then we need to change the interrupt register.
*/
if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
ap->last_ctl = tf->ctl;
vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
} else if (is_addr) {
writew(tf->feature, ioaddr->feature_addr);
writew(tf->nsect, ioaddr->nsect_addr);
writew(tf->lbal, ioaddr->lbal_addr);
writew(tf->lbam, ioaddr->lbam_addr);
writew(tf->lbah, ioaddr->lbah_addr);
}
if (tf->flags & ATA_TFLAG_DEVICE)
writeb(tf->device, ioaddr->device_addr);
ata_wait_idle(ap);
}
static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
u16 nsect, lbal, lbam, lbah;
nsect = tf->nsect = readw(ioaddr->nsect_addr);
lbal = tf->lbal = readw(ioaddr->lbal_addr);
lbam = tf->lbam = readw(ioaddr->lbam_addr);
lbah = tf->lbah = readw(ioaddr->lbah_addr);
tf->device = readw(ioaddr->device_addr);
if (tf->flags & ATA_TFLAG_LBA48) {
tf->hob_feature = readb(ioaddr->error_addr);
tf->hob_nsect = nsect >> 8;
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
tf->hob_lbah = lbah >> 8;
}
}
static void vsc_sata_set_piomode (struct ata_port *ap, struct ata_device *adev,
unsigned int pio)
{
/* We need empty implementation, the core doesn't test for NULL
* function pointer
*/
}
static void vsc_sata_set_udmamode (struct ata_port *ap, struct ata_device *adev,
unsigned int udma)
{
/* We need empty implementation, the core doesn't test for NULL
* function pointer
*/
}
/*
* vsc_sata_interrupt
*
* Read the interrupt register and process for the devices that have them pending.
*/
irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
{
struct ata_host_set *host_set = dev_instance;
unsigned int i;
unsigned int handled = 0;
u32 int_status;
spin_lock(&host_set->lock);
int_status = readl(host_set->mmio_base + VSC_SATA_INT_STAT_OFFSET);
for (i = 0; i < host_set->n_ports; i++) {
if (int_status & ((u32) 0xFF << (8 * i))) {
struct ata_port *ap;
ap = host_set->ports[i];
if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc && ((qc->flags & ATA_QCFLAG_POLL) == 0))
handled += ata_host_intr(ap, qc);
}
}
}
spin_unlock(&host_set->lock);
return IRQ_RETVAL(handled);
}
static Scsi_Host_Template vsc_sata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.queuecommand = ata_scsi_queuecmd,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
};
static struct ata_port_operations vsc_sata_ops = {
.port_disable = ata_port_disable,
.set_piomode = vsc_sata_set_piomode,
.set_udmamode = vsc_sata_set_udmamode,
.tf_load = vsc_sata_tf_load,
.tf_read = vsc_sata_tf_read,
.exec_command = ata_exec_command_mmio,
.check_status = ata_check_status_mmio,
.phy_reset = sata_phy_reset,
.phy_config = pata_phy_config, /* not a typo */
.bmdma_start = ata_bmdma_start_mmio,
.fill_sg = ata_fill_sg,
.eng_timeout = ata_eng_timeout,
.irq_handler = vsc_sata_interrupt,
.scr_read = vsc_sata_scr_read,
.scr_write = vsc_sata_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
};
static void vsc_sata_setup_port(struct ata_ioports *port, unsigned long base)
{
port->cmd_addr = base + VSC_SATA_TF_CMD_OFFSET;
port->data_addr = base + VSC_SATA_TF_DATA_OFFSET;
port->error_addr = base + VSC_SATA_TF_ERROR_OFFSET;
port->feature_addr = base + VSC_SATA_TF_FEATURE_OFFSET;
port->nsect_addr = base + VSC_SATA_TF_NSECT_OFFSET;
port->lbal_addr = base + VSC_SATA_TF_LBAL_OFFSET;
port->lbam_addr = base + VSC_SATA_TF_LBAM_OFFSET;
port->lbah_addr = base + VSC_SATA_TF_LBAH_OFFSET;
port->device_addr = base + VSC_SATA_TF_DEVICE_OFFSET;
port->status_addr = base + VSC_SATA_TF_STATUS_OFFSET;
port->command_addr = base + VSC_SATA_TF_COMMAND_OFFSET;
port->altstatus_addr = base + VSC_SATA_TF_ALTSTATUS_OFFSET;
port->ctl_addr = base + VSC_SATA_TF_CTL_OFFSET;
port->bmdma_addr = base + VSC_SATA_DMA_CMD_OFFSET;
port->scr_addr = base + VSC_SATA_SCR_STATUS_OFFSET;
}
static int vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
struct ata_probe_ent *probe_ent = NULL;
unsigned long base;
void *mmio_base;
int rc;
if (!printed_version++)
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
return rc;
/*
* Check if we have needed resource mapped.
*/
if (pci_resource_len(pdev, 0) == 0) {
rc = -ENODEV;
goto err_out;
}
rc = pci_request_regions(pdev, DRV_NAME);
if (rc)
goto err_out;
/*
* Use 32 bit DMA mask, because 64 bit address support is poor.
*/
rc = pci_set_dma_mask(pdev, 0xFFFFFFFF);
if (rc)
goto err_out_regions;
rc = pci_set_consistent_dma_mask(pdev, 0xFFFFFFFF);
if (rc)
goto err_out_regions;
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
if (probe_ent == NULL) {
rc = -ENOMEM;
goto err_out_regions;
}
memset(probe_ent, 0, sizeof(*probe_ent));
probe_ent->pdev = pdev;
INIT_LIST_HEAD(&probe_ent->node);
mmio_base = ioremap(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
if (mmio_base == NULL) {
rc = -ENOMEM;
goto err_out_free_ent;
}
base = (unsigned long) mmio_base;
/*
* Due to a bug in the chip, the default cache line size can't be used
*/
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
probe_ent->sht = &vsc_sata_sht;
probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_SATA_RESET;
probe_ent->port_ops = &vsc_sata_ops;
probe_ent->n_ports = 4;
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = SA_SHIRQ;
probe_ent->mmio_base = mmio_base;
/* We don't care much about the PIO/UDMA masks, but the core won't like us
* if we don't fill these
*/
probe_ent->pio_mask = 0x1f;
probe_ent->udma_mask = 0x3f;
/* We have 4 ports per PCI function */
vsc_sata_setup_port(&probe_ent->port[0], base + 1 * VSC_SATA_PORT_OFFSET);
vsc_sata_setup_port(&probe_ent->port[1], base + 2 * VSC_SATA_PORT_OFFSET);
vsc_sata_setup_port(&probe_ent->port[2], base + 3 * VSC_SATA_PORT_OFFSET);
vsc_sata_setup_port(&probe_ent->port[3], base + 4 * VSC_SATA_PORT_OFFSET);
pci_set_master(pdev);
/* FIXME: check ata_device_add return value */
ata_device_add(probe_ent);
kfree(probe_ent);
return 0;
err_out_free_ent:
kfree(probe_ent);
err_out_regions:
pci_release_regions(pdev);
err_out:
pci_disable_device(pdev);
return rc;
}
static struct pci_device_id vsc_sata_pci_tbl[] = {
{ 0x1725, 0x7174, PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
{ 0x8086, 0x3200, PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
{ }
};
static struct pci_driver vsc_sata_pci_driver = {
.name = DRV_NAME,
.id_table = vsc_sata_pci_tbl,
.probe = vsc_sata_init_one,
.remove = ata_pci_remove_one,
};
static int __init vsc_sata_init(void)
{
int rc;
rc = pci_module_init(&vsc_sata_pci_driver);
if (rc)
return rc;
return 0;
}
static void __exit vsc_sata_exit(void)
{
pci_unregister_driver(&vsc_sata_pci_driver);
}
MODULE_AUTHOR("Jeremy Higdon");
MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
module_init(vsc_sata_init);
module_exit(vsc_sata_exit);
include/linux/libata.h
View file @ dc22246b
......@@ -183,12 +183,15 @@ struct ata_ioports {
unsigned long cmd_addr;
unsigned long data_addr;
unsigned long error_addr;
unsigned long feature_addr;
unsigned long nsect_addr;
unsigned long lbal_addr;
unsigned long lbam_addr;
unsigned long lbah_addr;
unsigned long device_addr;
unsigned long cmdstat_addr;
unsigned long status_addr;
unsigned long command_addr;
unsigned long altstatus_addr;
unsigned long ctl_addr;
unsigned long bmdma_addr;
unsigned long scr_addr;
......@@ -408,6 +411,7 @@ extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn
extern int ata_scsi_error(struct Scsi_Host *host);
extern int ata_scsi_release(struct Scsi_Host *host);
extern int ata_scsi_slave_config(struct scsi_device *sdev);
extern inline unsigned int ata_host_intr (struct ata_port *ap, struct ata_queued_cmd *qc);
/*
* Default driver ops implementations
*/
......@@ -465,8 +469,8 @@ static inline u8 ata_chk_status(struct ata_port *ap)
static inline u8 ata_altstatus(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO)
return readb(ap->ioaddr.ctl_addr);
return inb(ap->ioaddr.ctl_addr);
return readb(ap->ioaddr.altstatus_addr);
return inb(ap->ioaddr.altstatus_addr);
}
static inline void ata_pause(struct ata_port *ap)
......@@ -494,7 +498,7 @@ static inline u8 ata_wait_idle(struct ata_port *ap)
u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
if (status & (ATA_BUSY | ATA_DRQ)) {
unsigned long l = ap->ioaddr.cmdstat_addr;
unsigned long l = ap->ioaddr.status_addr;
printk(KERN_WARNING
"ATA: abnormal status 0x%X on port 0x%lX\n",
status, l);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7