drm/i915: preserve the PBC bits of TRANS_CHICKEN2

Bits 30 and 24:0 are PBC, so don't zero them. Some of the other bits
are being zeroed, but I couldn't find a reason for this, so leave them
as they are for now to avoid regressions.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Delete the redudant #define that Imre spotted in his review.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -3959,8 +3959,11 @@
 #define _TRANSA_CHICKEN2	 0xf0064
 #define _TRANSB_CHICKEN2	 0xf1064
 #define TRANS_CHICKEN2(pipe) _PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2)
-#define  TRANS_CHICKEN2_TIMING_OVERRIDE		(1<<31)
-#define  TRANS_CHICKEN2_FDI_POLARITY_REVERSED	(1<<29)
+#define  TRANS_CHICKEN2_TIMING_OVERRIDE			(1<<31)
+#define  TRANS_CHICKEN2_FDI_POLARITY_REVERSED		(1<<29)
+#define  TRANS_CHICKEN2_FRAME_START_DELAY_MASK		(3<<27)
+#define  TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER	(1<<26)
+#define  TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH	(1<<25)
 
 #define SOUTH_CHICKEN1		0xc2000
 #define  FDIA_PHASE_SYNC_SHIFT_OVR	19

drivers/gpu/drm/i915/intel_pm.c

@@ -3604,9 +3604,14 @@ static void cpt_init_clock_gating(struct drm_device *dev)
 	 * downward, on (only) LVDS of some HP laptops with IVY.
 	 */
 	for_each_pipe(pipe) {
-		val = TRANS_CHICKEN2_TIMING_OVERRIDE;
+		val = I915_READ(TRANS_CHICKEN2(pipe));
+		val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
+		val &= ~TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
 		if (dev_priv->fdi_rx_polarity_inverted)
 			val |= TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
+		val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
+		val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER;
+		val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH;
 		I915_WRITE(TRANS_CHICKEN2(pipe), val);
 	}
 	/* WADP0ClockGatingDisable */