Merge branch 'add-ethernet-driver-for-starfive-jh7110-soc'

Samin Guo says:

====================
Add Ethernet driver for StarFive JH7110 SoC

This series adds ethernet support for the StarFive JH7110 RISC-V SoC,
which includes a dwmac-5.20 MAC driver (from Synopsys DesignWare).
This series has been tested and works fine on VisionFive-2 v1.2A and
v1.3B SBC boards.

For more information and support, you can visit RVspace wiki[1].
You can simply review or test the patches at the link [2].
This patchset should be applied after the patchset [3] [4].

[1]: https://wiki.rvspace.org/
[2]: https://github.com/saminGuo/linux/tree/vf2-6.3rc4-gmac-net-next
[3]: https://patchwork.kernel.org/project/linux-riscv/cover/20230401111934.130844-1-hal.feng@starfivetech.com
[4]: https://patchwork.kernel.org/project/linux-riscv/cover/20230315055813.94740-1-william.qiu@starfivetech.com
====================

Link: https://lore.kernel.org/r/20230417100251.11871-1-samin.guo@starfivetech.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -30,6 +30,7 @@ select:
           - snps,dwmac-4.10a
           - snps,dwmac-4.20a
           - snps,dwmac-5.10a
+          - snps,dwmac-5.20
           - snps,dwxgmac
           - snps,dwxgmac-2.10
 
@@ -90,8 +91,10 @@ properties:
         - snps,dwmac-4.10a
         - snps,dwmac-4.20a
         - snps,dwmac-5.10a
+        - snps,dwmac-5.20
         - snps,dwxgmac
         - snps,dwxgmac-2.10
+        - starfive,jh7110-dwmac
 
   reg:
     minItems: 1
@@ -134,12 +137,16 @@ properties:
         - ptp_ref
 
   resets:
-    maxItems: 1
-    description:
-      MAC Reset signal.
+    minItems: 1
+    items:
+      - description: GMAC stmmaceth reset
+      - description: AHB reset
 
   reset-names:
-    const: stmmaceth
+    minItems: 1
+    items:
+      - const: stmmaceth
+      - const: ahb
 
   power-domains:
     maxItems: 1
@@ -579,6 +586,7 @@ allOf:
               - snps,dwmac-3.50a
               - snps,dwmac-4.10a
               - snps,dwmac-4.20a
+              - snps,dwmac-5.20
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac
@@ -636,6 +644,7 @@ allOf:
               - snps,dwmac-4.10a
               - snps,dwmac-4.20a
               - snps,dwmac-5.10a
+              - snps,dwmac-5.20
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac

Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 StarFive Technology Co., Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/starfive,jh7110-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 DWMAC glue layer
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+  - Samin Guo <samin.guo@starfivetech.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - starfive,jh7110-dwmac
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - starfive,jh7110-dwmac
+      - const: snps,dwmac-5.20
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: GMAC main clock
+      - description: GMAC AHB clock
+      - description: PTP clock
+      - description: TX clock
+      - description: GTX clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: pclk
+      - const: ptp_ref
+      - const: tx
+      - const: gtx
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 3
+    maxItems: 3
+
+  resets:
+    items:
+      - description: MAC Reset signal.
+      - description: AHB Reset signal.
+
+  reset-names:
+    items:
+      - const: stmmaceth
+      - const: ahb
+
+  starfive,tx-use-rgmii-clk:
+    description:
+      Tx clock is provided by external rgmii clock.
+    type: boolean
+
+  starfive,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that configures phy mode
+          - description: Offset of phy mode selection
+          - description: Shift of phy mode selection
+    description:
+      A phandle to syscon with two arguments that configure phy mode.
+      The argument one is the offset of phy mode selection, the
+      argument two is the shift of phy mode selection.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@16030000 {
+        compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
+        reg = <0x16030000 0x10000>;
+        clocks = <&clk 3>, <&clk 2>, <&clk 109>,
+                 <&clk 6>, <&clk 111>;
+        clock-names = "stmmaceth", "pclk", "ptp_ref",
+                      "tx", "gtx";
+        resets = <&rst 1>, <&rst 2>;
+        reset-names = "stmmaceth", "ahb";
+        interrupts = <7>, <6>, <5>;
+        interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+        phy-mode = "rgmii-id";
+        snps,multicast-filter-bins = <64>;
+        snps,perfect-filter-entries = <8>;
+        rx-fifo-depth = <2048>;
+        tx-fifo-depth = <2048>;
+        snps,fixed-burst;
+        snps,no-pbl-x8;
+        snps,tso;
+        snps,force_thresh_dma_mode;
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,en-tx-lpi-clockgating;
+        snps,txpbl = <16>;
+        snps,rxpbl = <16>;
+        starfive,syscon = <&aon_syscon 0xc 0x12>;
+        phy-handle = <&phy0>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+
+            phy0: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+
+        stmmac_axi_setup: stmmac-axi-config {
+            snps,lpi_en;
+            snps,wr_osr_lmt = <4>;
+            snps,rd_osr_lmt = <4>;
+            snps,blen = <256 128 64 32 0 0 0>;
+        };
+    };

MAINTAINERS

@@ -19928,6 +19928,13 @@ M:	Emil Renner Berthing <kernel@esmil.dk>
 S:	Maintained
 F:	arch/riscv/boot/dts/starfive/
 
+STARFIVE DWMAC GLUE LAYER
+M:	Emil Renner Berthing <kernel@esmil.dk>
+M:	Samin Guo <samin.guo@starfivetech.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
+F:	drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
+
 STARFIVE JH7100 CLOCK DRIVERS
 M:	Emil Renner Berthing <kernel@esmil.dk>
 S:	Maintained

drivers/net/ethernet/stmicro/stmmac/Kconfig

@@ -165,6 +165,18 @@ config DWMAC_SOCFPGA
 	  for the stmmac device driver. This driver is used for
 	  arria5 and cyclone5 FPGA SoCs.
 
+config DWMAC_STARFIVE
+	tristate "StarFive dwmac support"
+	depends on OF && (ARCH_STARFIVE || COMPILE_TEST)
+	select MFD_SYSCON
+	default m if ARCH_STARFIVE
+	help
+	  Support for ethernet controllers on StarFive RISC-V SoCs
+
+	  This selects the StarFive platform specific glue layer support for
+	  the stmmac device driver. This driver is used for StarFive JH7110
+	  ethernet controller.
+
 config DWMAC_STI
 	tristate "STi GMAC support"
 	default ARCH_STI

drivers/net/ethernet/stmicro/stmmac/Makefile

@@ -23,6 +23,7 @@ obj-$(CONFIG_DWMAC_OXNAS)	+= dwmac-oxnas.o
 obj-$(CONFIG_DWMAC_QCOM_ETHQOS)	+= dwmac-qcom-ethqos.o
 obj-$(CONFIG_DWMAC_ROCKCHIP)	+= dwmac-rk.o
 obj-$(CONFIG_DWMAC_SOCFPGA)	+= dwmac-altr-socfpga.o
+obj-$(CONFIG_DWMAC_STARFIVE)	+= dwmac-starfive.o
 obj-$(CONFIG_DWMAC_STI)		+= dwmac-sti.o
 obj-$(CONFIG_DWMAC_STM32)	+= dwmac-stm32.o
 obj-$(CONFIG_DWMAC_SUNXI)	+= dwmac-sunxi.o

drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive DWMAC platform driver
+ *
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ *
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include "stmmac_platform.h"
+
+#define STARFIVE_DWMAC_PHY_INFT_RGMII	0x1
+#define STARFIVE_DWMAC_PHY_INFT_RMII	0x4
+#define STARFIVE_DWMAC_PHY_INFT_FIELD	0x7U
+
+struct starfive_dwmac {
+	struct device *dev;
+	struct clk *clk_tx;
+};
+
+static void starfive_dwmac_fix_mac_speed(void *priv, unsigned int speed)
+{
+	struct starfive_dwmac *dwmac = priv;
+	unsigned long rate;
+	int err;
+
+	rate = clk_get_rate(dwmac->clk_tx);
+
+	switch (speed) {
+	case SPEED_1000:
+		rate = 125000000;
+		break;
+	case SPEED_100:
+		rate = 25000000;
+		break;
+	case SPEED_10:
+		rate = 2500000;
+		break;
+	default:
+		dev_err(dwmac->dev, "invalid speed %u\n", speed);
+		break;
+	}
+
+	err = clk_set_rate(dwmac->clk_tx, rate);
+	if (err)
+		dev_err(dwmac->dev, "failed to set tx rate %lu\n", rate);
+}
+
+static int starfive_dwmac_set_mode(struct plat_stmmacenet_data *plat_dat)
+{
+	struct starfive_dwmac *dwmac = plat_dat->bsp_priv;
+	struct regmap *regmap;
+	unsigned int args[2];
+	unsigned int mode;
+	int err;
+
+	switch (plat_dat->interface) {
+	case PHY_INTERFACE_MODE_RMII:
+		mode = STARFIVE_DWMAC_PHY_INFT_RMII;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+		mode = STARFIVE_DWMAC_PHY_INFT_RGMII;
+		break;
+
+	default:
+		dev_err(dwmac->dev, "unsupported interface %d\n",
+			plat_dat->interface);
+		return -EINVAL;
+	}
+
+	regmap = syscon_regmap_lookup_by_phandle_args(dwmac->dev->of_node,
+						      "starfive,syscon",
+						      2, args);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dwmac->dev, PTR_ERR(regmap), "getting the regmap failed\n");
+
+	/* args[0]:offset  args[1]: shift */
+	err = regmap_update_bits(regmap, args[0],
+				 STARFIVE_DWMAC_PHY_INFT_FIELD << args[1],
+				 mode << args[1]);
+	if (err)
+		return dev_err_probe(dwmac->dev, err, "error setting phy mode\n");
+
+	return 0;
+}
+
+static int starfive_dwmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct starfive_dwmac *dwmac;
+	struct clk *clk_gtx;
+	int err;
+
+	err = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (err)
+		return dev_err_probe(&pdev->dev, err,
+				     "failed to get resources\n");
+
+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return dev_err_probe(&pdev->dev, PTR_ERR(plat_dat),
+				     "dt configuration failed\n");
+
+	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
+	if (!dwmac)
+		return -ENOMEM;
+
+	dwmac->clk_tx = devm_clk_get_enabled(&pdev->dev, "tx");
+	if (IS_ERR(dwmac->clk_tx))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->clk_tx),
+				     "error getting tx clock\n");
+
+	clk_gtx = devm_clk_get_enabled(&pdev->dev, "gtx");
+	if (IS_ERR(clk_gtx))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk_gtx),
+				     "error getting gtx clock\n");
+
+	/* Generally, the rgmii_tx clock is provided by the internal clock,
+	 * which needs to match the corresponding clock frequency according
+	 * to different speeds. If the rgmii_tx clock is provided by the
+	 * external rgmii_rxin, there is no need to configure the clock
+	 * internally, because rgmii_rxin will be adaptively adjusted.
+	 */
+	if (!device_property_read_bool(&pdev->dev, "starfive,tx-use-rgmii-clk"))
+		plat_dat->fix_mac_speed = starfive_dwmac_fix_mac_speed;
+
+	dwmac->dev = &pdev->dev;
+	plat_dat->bsp_priv = dwmac;
+	plat_dat->dma_cfg->dche = true;
+
+	err = starfive_dwmac_set_mode(plat_dat);
+	if (err)
+		return err;
+
+	err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	if (err) {
+		stmmac_remove_config_dt(pdev, plat_dat);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id starfive_dwmac_match[] = {
+	{ .compatible = "starfive,jh7110-dwmac"	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, starfive_dwmac_match);
+
+static struct platform_driver starfive_dwmac_driver = {
+	.probe  = starfive_dwmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name = "starfive-dwmac",
+		.pm = &stmmac_pltfr_pm_ops,
+		.of_match_table = starfive_dwmac_match,
+	},
+};
+module_platform_driver(starfive_dwmac_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("StarFive DWMAC platform driver");
+MODULE_AUTHOR("Emil Renner Berthing <kernel@esmil.dk>");
+MODULE_AUTHOR("Samin Guo <samin.guo@starfivetech.com>");

drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c

@@ -519,7 +519,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 	if (of_device_is_compatible(np, "snps,dwmac-4.00") ||
 	    of_device_is_compatible(np, "snps,dwmac-4.10a") ||
 	    of_device_is_compatible(np, "snps,dwmac-4.20a") ||
-	    of_device_is_compatible(np, "snps,dwmac-5.10a")) {
+	    of_device_is_compatible(np, "snps,dwmac-5.10a") ||
+	    of_device_is_compatible(np, "snps,dwmac-5.20")) {
 		plat->has_gmac4 = 1;
 		plat->has_gmac = 0;
 		plat->pmt = 1;