Skip to content

L
linux
Commit dcfc827d authored by Alexandre Belloni's avatar Alexandre Belloni
Browse files
Options

ARM: dts: at91: sama5d4: switch to new clock bindings 

Switch sama5d4 boards to the new PMC clock bindings.
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
parent 4ab7ca09
Show whitespace changes
Inline Side-by-side
Showing with 49 additions and 488 deletions
arch/arm/boot/dts/at91-sama5d4ek.dts
View file @ dcfc827d
......@@ -115,7 +115,7 @@ i2c0: i2c@f8014000 {
wm8904: codec@1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
clocks = <&pck2>;
clocks = <&pmc PMC_TYPE_SYSTEM 10>;
clock-names = "mclk";
};
......
arch/arm/boot/dts/sama5d4.dtsi
View file @ dcfc827d
......@@ -137,7 +137,7 @@ usb0: gadget@400000 {
reg = <0x00400000 0x100000
0xfc02c000 0x4000>;
interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udphs_clk>, <&utmi>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk";
status = "disabled";
......@@ -264,7 +264,7 @@ usb1: ohci@500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
......@@ -273,7 +273,7 @@ usb2: ehci@600000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&utmi>, <&uhphs_clk>;
clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 46>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
......@@ -297,7 +297,7 @@ ebi: ebi@10000000 {
0x1 0x0 0x60000000 0x10000000
0x2 0x0 0x70000000 0x10000000
0x3 0x0 0x80000000 0x8000000>;
clocks = <&mck>;
clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
......@@ -327,7 +327,7 @@ hlcdc: hlcdc@f0000000 {
compatible = "atmel,sama5d4-hlcdc";
reg = <0xf0000000 0x4000>;
interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
......@@ -356,7 +356,7 @@ dma1: dma-controller@f0004000 {
reg = <0xf0004000 0x200>;
interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
clocks = <&dma1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 50>;
clock-names = "dma_clk";
};
......@@ -366,7 +366,7 @@ isi: isi@f0008000 {
interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isi_data_0_7>;
clocks = <&isi_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
clock-names = "isi_clk";
status = "disabled";
port {
......@@ -378,7 +378,7 @@ port {
ramc0: ramc@f0010000 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xf0010000 0x200>;
clocks = <&ddrck>, <&mpddr_clk>;
clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "ddrck", "mpddr";
};
......@@ -387,7 +387,7 @@ dma0: dma-controller@f0014000 {
reg = <0xf0014000 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
clocks = <&dma0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "dma_clk";
};
......@@ -395,448 +395,9 @@ pmc: pmc@f0018000 {
compatible = "atmel,sama5d4-pmc", "syscon";
reg = <0xf0018000 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
main_rc_osc: main_rc_osc {
compatible = "atmel,at91sam9x5-clk-main-rc-osc";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MOSCRCS>;
clock-frequency = <12000000>;
clock-accuracy = <100000000>;
};
main_osc: main_osc {
compatible = "atmel,at91rm9200-clk-main-osc";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MOSCS>;
clocks = <&main_xtal>;
};
main: mainck {
compatible = "atmel,at91sam9x5-clk-main";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MOSCSELS>;
clocks = <&main_rc_osc &main_osc>;
};
plla: pllack {
compatible = "atmel,sama5d3-clk-pll";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_LOCKA>;
clocks = <&main>;
reg = <0>;
atmel,clk-input-range = <12000000 12000000>;
#atmel,pll-clk-output-range-cells = <4>;
atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
};
plladiv: plladivck {
compatible = "atmel,at91sam9x5-clk-plldiv";
#clock-cells = <0>;
clocks = <&plla>;
};
utmi: utmick {
compatible = "atmel,at91sam9x5-clk-utmi";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_LOCKU>;
clocks = <&main>;
};
mck: masterck {
compatible = "atmel,at91sam9x5-clk-master";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MCKRDY>;
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
atmel,clk-output-range = <125000000 200000000>;
atmel,clk-divisors = <1 2 4 3>;
};
h32ck: h32mxck {
#clock-cells = <0>;
compatible = "atmel,sama5d4-clk-h32mx";
clocks = <&mck>;
};
usb: usbck {
compatible = "atmel,at91sam9x5-clk-usb";
#clock-cells = <0>;
clocks = <&plladiv>, <&utmi>;
};
prog: progck {
compatible = "atmel,at91sam9x5-clk-programmable";
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
prog0: prog0 {
#clock-cells = <0>;
reg = <0>;
interrupts = <AT91_PMC_PCKRDY(0)>;
};
prog1: prog1 {
#clock-cells = <0>;
reg = <1>;
interrupts = <AT91_PMC_PCKRDY(1)>;
};
prog2: prog2 {
#clock-cells = <0>;
reg = <2>;
interrupts = <AT91_PMC_PCKRDY(2)>;
};
};
smd: smdclk {
compatible = "atmel,at91sam9x5-clk-smd";
#clock-cells = <0>;
clocks = <&plladiv>, <&utmi>;
};
systemck {
compatible = "atmel,at91rm9200-clk-system";
#address-cells = <1>;
#size-cells = <0>;
ddrck: ddrck {
#clock-cells = <0>;
reg = <2>;
clocks = <&mck>;
};
lcdck: lcdck {
#clock-cells = <0>;
reg = <3>;
clocks = <&mck>;
};
smdck: smdck {
#clock-cells = <0>;
reg = <4>;
clocks = <&smd>;
};
uhpck: uhpck {
#clock-cells = <0>;
reg = <6>;
clocks = <&usb>;
};
udpck: udpck {
#clock-cells = <0>;
reg = <7>;
clocks = <&usb>;
};
pck0: pck0 {
#clock-cells = <0>;
reg = <8>;
clocks = <&prog0>;
};
pck1: pck1 {
#clock-cells = <0>;
reg = <9>;
clocks = <&prog1>;
};
pck2: pck2 {
#clock-cells = <0>;
reg = <10>;
clocks = <&prog2>;
};
};
periph32ck {
compatible = "atmel,at91sam9x5-clk-peripheral";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&h32ck>;
pioD_clk: pioD_clk {
#clock-cells = <0>;
reg = <5>;
};
usart0_clk: usart0_clk {
#clock-cells = <0>;
reg = <6>;
};
usart1_clk: usart1_clk {
#clock-cells = <0>;
reg = <7>;
};
icm_clk: icm_clk {
#clock-cells = <0>;
reg = <9>;
};
aes_clk: aes_clk {
#clock-cells = <0>;
reg = <12>;
};
tdes_clk: tdes_clk {
#clock-cells = <0>;
reg = <14>;
};
sha_clk: sha_clk {
#clock-cells = <0>;
reg = <15>;
};
matrix1_clk: matrix1_clk {
#clock-cells = <0>;
reg = <17>;
};
hsmc_clk: hsmc_clk {
#clock-cells = <0>;
reg = <22>;
};
pioA_clk: pioA_clk {
#clock-cells = <0>;
reg = <23>;
};
pioB_clk: pioB_clk {
#clock-cells = <0>;
reg = <24>;
};
pioC_clk: pioC_clk {
#clock-cells = <0>;
reg = <25>;
};
pioE_clk: pioE_clk {
#clock-cells = <0>;
reg = <26>;
};
uart0_clk: uart0_clk {
#clock-cells = <0>;
reg = <27>;
};
uart1_clk: uart1_clk {
#clock-cells = <0>;
reg = <28>;
};
usart2_clk: usart2_clk {
#clock-cells = <0>;
reg = <29>;
};
usart3_clk: usart3_clk {
#clock-cells = <0>;
reg = <30>;
};
usart4_clk: usart4_clk {
#clock-cells = <0>;
reg = <31>;
};
twi0_clk: twi0_clk {
reg = <32>;
#clock-cells = <0>;
};
twi1_clk: twi1_clk {
#clock-cells = <0>;
reg = <33>;
};
twi2_clk: twi2_clk {
#clock-cells = <0>;
reg = <34>;
};
mci0_clk: mci0_clk {
#clock-cells = <0>;
reg = <35>;
};
mci1_clk: mci1_clk {
#clock-cells = <0>;
reg = <36>;
};
spi0_clk: spi0_clk {
#clock-cells = <0>;
reg = <37>;
};
spi1_clk: spi1_clk {
#clock-cells = <0>;
reg = <38>;
};
spi2_clk: spi2_clk {
#clock-cells = <0>;
reg = <39>;
};
tcb0_clk: tcb0_clk {
#clock-cells = <0>;
reg = <40>;
};
tcb1_clk: tcb1_clk {
#clock-cells = <0>;
reg = <41>;
};
tcb2_clk: tcb2_clk {
#clock-cells = <0>;
reg = <42>;
};
pwm_clk: pwm_clk {
#clock-cells = <0>;
reg = <43>;
};
adc_clk: adc_clk {
#clock-cells = <0>;
reg = <44>;
};
dbgu_clk: dbgu_clk {
#clock-cells = <0>;
reg = <45>;
};
uhphs_clk: uhphs_clk {
#clock-cells = <0>;
reg = <46>;
};
udphs_clk: udphs_clk {
#clock-cells = <0>;
reg = <47>;
};
ssc0_clk: ssc0_clk {
#clock-cells = <0>;
reg = <48>;
};
ssc1_clk: ssc1_clk {
#clock-cells = <0>;
reg = <49>;
};
trng_clk: trng_clk {
#clock-cells = <0>;
reg = <53>;
};
macb0_clk: macb0_clk {
#clock-cells = <0>;
reg = <54>;
};
macb1_clk: macb1_clk {
#clock-cells = <0>;
reg = <55>;
};
fuse_clk: fuse_clk {
#clock-cells = <0>;
reg = <57>;
};
securam_clk: securam_clk {
#clock-cells = <0>;
reg = <59>;
};
smd_clk: smd_clk {
#clock-cells = <0>;
reg = <61>;
};
twi3_clk: twi3_clk {
#clock-cells = <0>;
reg = <62>;
};
catb_clk: catb_clk {
#clock-cells = <0>;
reg = <63>;
};
};
periph64ck {
compatible = "atmel,at91sam9x5-clk-peripheral";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mck>;
dma0_clk: dma0_clk {
#clock-cells = <0>;
reg = <8>;
};
cpkcc_clk: cpkcc_clk {
#clock-cells = <0>;
reg = <10>;
};
aesb_clk: aesb_clk {
#clock-cells = <0>;
reg = <13>;
};
mpddr_clk: mpddr_clk {
#clock-cells = <0>;
reg = <16>;
};
matrix0_clk: matrix0_clk {
#clock-cells = <0>;
reg = <18>;
};
vdec_clk: vdec_clk {
#clock-cells = <0>;
reg = <19>;
};
dma1_clk: dma1_clk {
#clock-cells = <0>;
reg = <50>;
};
lcdc_clk: lcdc_clk {
#clock-cells = <0>;
reg = <51>;
};
isi_clk: isi_clk {
#clock-cells = <0>;
reg = <52>;
};
};
#clock-cells = <2>;
clocks = <&clk32k>, <&main_xtal>;
clock-names = "slow_clk", "main_xtal";
};
mmc0: mmc@f8000000 {
......@@ -852,7 +413,7 @@ mmc0: mmc@f8000000 {
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mci0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
clock-names = "mci_clk";
};
......@@ -869,7 +430,7 @@ uart0: serial@f8004000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&uart0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
clock-names = "usart";
status = "disabled";
};
......@@ -887,7 +448,7 @@ ssc0: ssc@f8008000 {
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(27))>;
dma-names = "tx", "rx";
clocks = <&ssc0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
clock-names = "pclk";
status = "disabled";
};
......@@ -897,7 +458,7 @@ pwm0: pwm@f800c000 {
reg = <0xf800c000 0x300>;
interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
clocks = <&pwm_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
status = "disabled";
};
......@@ -916,7 +477,7 @@ spi0: spi@f8010000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
clocks = <&spi0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
clock-names = "spi_clk";
status = "disabled";
};
......@@ -936,7 +497,7 @@ i2c0: i2c@f8014000 {
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
status = "disabled";
};
......@@ -955,7 +516,7 @@ i2c1: i2c@f8018000 {
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
status = "disabled";
};
......@@ -965,7 +526,7 @@ tcb0: timer@f801c000 {
#size-cells = <0>;
reg = <0xf801c000 0x100>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb0_clk>, <&clk32k>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 40>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
......@@ -977,7 +538,7 @@ macb0: ethernet@f8020000 {
pinctrl-0 = <&pinctrl_macb0_rmii>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&macb0_clk>, <&macb0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_PERIPHERAL 54>;
clock-names = "hclk", "pclk";
status = "disabled";
};
......@@ -997,7 +558,7 @@ i2c2: i2c@f8024000 {
pinctrl-0 = <&pinctrl_i2c2>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi2_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
status = "disabled";
};
......@@ -1019,7 +580,7 @@ usart0: serial@f802c000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
clocks = <&usart0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "usart";
status = "disabled";
};
......@@ -1037,7 +598,7 @@ usart1: serial@f8030000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
clocks = <&usart1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
......@@ -1055,7 +616,7 @@ mmc1: mmc@fc000000 {
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mci1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
clock-names = "mci_clk";
};
......@@ -1072,7 +633,7 @@ uart1: serial@fc004000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&uart1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
clock-names = "usart";
status = "disabled";
};
......@@ -1090,7 +651,7 @@ usart2: serial@fc008000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
clocks = <&usart2_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
clock-names = "usart";
status = "disabled";
};
......@@ -1108,7 +669,7 @@ usart3: serial@fc00c000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
clocks = <&usart3_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
clock-names = "usart";
status = "disabled";
};
......@@ -1126,7 +687,7 @@ usart4: serial@fc010000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart4>;
clocks = <&usart4_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
clock-names = "usart";
status = "disabled";
};
......@@ -1144,7 +705,7 @@ ssc1: ssc@fc014000 {
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(29))>;
dma-names = "tx", "rx";
clocks = <&ssc1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
clock-names = "pclk";
status = "disabled";
};
......@@ -1164,7 +725,7 @@ spi1: spi@fc018000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
clocks = <&spi1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
clock-names = "spi_clk";
status = "disabled";
};
......@@ -1184,7 +745,7 @@ spi2: spi@fc01c000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
clocks = <&spi2_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
clock-names = "spi_clk";
status = "disabled";
};
......@@ -1195,7 +756,7 @@ tcb1: timer@fc020000 {
#size-cells = <0>;
reg = <0xfc020000 0x100>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb1_clk>, <&clk32k>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
......@@ -1205,7 +766,7 @@ tcb2: timer@fc024000 {
#size-cells = <0>;
reg = <0xfc024000 0x100>;
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb2_clk>, <&clk32k>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
......@@ -1217,7 +778,7 @@ macb1: ethernet@fc028000 {
pinctrl-0 = <&pinctrl_macb1_rmii>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&macb1_clk>, <&macb1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_PERIPHERAL 55>;
clock-names = "hclk", "pclk";
status = "disabled";
};
......@@ -1226,14 +787,14 @@ trng@fc030000 {
compatible = "atmel,at91sam9g45-trng";
reg = <0xfc030000 0x100>;
interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&trng_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
};
adc0: adc@fc034000 {
compatible = "atmel,at91sam9x5-adc";
reg = <0xfc034000 0x100>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&adc_clk>,
clocks = <&pmc PMC_TYPE_PERIPHERAL 44>,
<&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channels-used = <0x01f>;
......@@ -1276,7 +837,7 @@ aes@fc044000 {
<&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(40))>;
dma-names = "tx", "rx";
clocks = <&aes_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "aes_clk";
status = "okay";
};
......@@ -1290,7 +851,7 @@ tdes@fc04c000 {
<&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(43))>;
dma-names = "tx", "rx";
clocks = <&tdes_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "tdes_clk";
status = "okay";
};
......@@ -1302,7 +863,7 @@ sha@fc050000 {
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(44))>;
dma-names = "tx";
clocks = <&sha_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "sha_clk";
status = "okay";
};
......@@ -1311,7 +872,7 @@ hsmc: smc@fc05c000 {
compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
reg = <0xfc05c000 0x1000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
clocks = <&hsmc_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
......@@ -1339,7 +900,7 @@ pit: timer@fc068630 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfc068630 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&h32ck>;
clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
};
watchdog: watchdog@fc068640 {
......@@ -1370,7 +931,7 @@ dbgu: serial@fc069000 {
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
clocks = <&dbgu_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
clock-names = "usart";
status = "disabled";
};
......@@ -1400,7 +961,7 @@ pioA: gpio@fc06a000 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioA_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
};
pioB: gpio@fc06b000 {
......@@ -1411,7 +972,7 @@ pioB: gpio@fc06b000 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioB_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
};
pioC: gpio@fc06c000 {
......@@ -1422,7 +983,7 @@ pioC: gpio@fc06c000 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioC_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
};
pioD: gpio@fc068000 {
......@@ -1433,7 +994,7 @@ pioD: gpio@fc068000 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioD_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
};
pioE: gpio@fc06d000 {
......@@ -1444,7 +1005,7 @@ pioE: gpio@fc06d000 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioE_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
};
/* pinctrl pin settings */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7