omap: Move omap1 USB platform init code into mach-omap1/usb.c

Move omap1 FS USB platform init code into mach-omap1/usb.c
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/Makefile

@@ -23,6 +23,9 @@ obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
 
 led-y := leds.o
 
+usb-fs-$(CONFIG_USB)			:= usb.o
+obj-y					+= $(usb-fs-m) $(usb-fs-y)
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o

arch/arm/mach-omap1/board-ams-delta.c

@@ -235,7 +235,7 @@ static void __init ams_delta_init(void)
 	/* Clear latch2 (NAND, LCD, modem enable) */
 	ams_delta_latch2_write(~0, 0);
 
-	omap_usb_init(&ams_delta_usb_config);
+	omap1_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
 #ifdef CONFIG_AMS_DELTA_FIQ

arch/arm/mach-omap1/board-generic.c

@@ -72,12 +72,12 @@ static void __init omap_generic_init(void)
 		omap_cfg_reg(UART3_TX);
 		omap_cfg_reg(UART3_RX);
 
-		omap_usb_init(&generic1510_usb_config);
+		omap1_usb_init(&generic1510_usb_config);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (!cpu_is_omap1510()) {
-		omap_usb_init(&generic1610_usb_config);
+		omap1_usb_init(&generic1610_usb_config);
 	}
 #endif
 

arch/arm/mach-omap1/board-h2.c

@@ -452,7 +452,7 @@ static void __init h2_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
 			      ARRAY_SIZE(h2_i2c_board_info));
-	omap_usb_init(&h2_usb_config);
+	omap1_usb_init(&h2_usb_config);
 	h2_mmc_init();
 }
 

arch/arm/mach-omap1/board-h3.c

@@ -405,7 +405,7 @@ static void __init h3_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
 			      ARRAY_SIZE(h3_i2c_board_info));
-	omap_usb_init(&h3_usb_config);
+	omap1_usb_init(&h3_usb_config);
 	h3_mmc_init();
 }
 

arch/arm/mach-omap1/board-htcherald.c

@@ -287,7 +287,7 @@ static void __init htcherald_init(void)
 	htcherald_disable_watchdog();
 
 	htcherald_usb_enable();
-	omap_usb_init(&htcherald_usb_config);
+	omap1_usb_init(&htcherald_usb_config);
 }
 
 static void __init htcherald_init_irq(void)

arch/arm/mach-omap1/board-innovator.c

@@ -422,13 +422,13 @@ static void __init innovator_init(void)
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
-		omap_usb_init(&innovator1510_usb_config);
+		omap1_usb_init(&innovator1510_usb_config);
 		innovator_config[1].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
-		omap_usb_init(&h2_usb_config);
+		omap1_usb_init(&h2_usb_config);
 		innovator_config[1].data = &innovator1610_lcd_config;
 	}
 #endif

arch/arm/mach-omap1/board-nokia770.c

@@ -386,7 +386,7 @@ static void __init omap_nokia770_init(void)
 	hwa742_dev_init();
 	ads7846_dev_init();
 	mipid_dev_init();
-	omap_usb_init(&nokia770_usb_config);
+	omap1_usb_init(&nokia770_usb_config);
 	nokia770_mmc_init();
 }
 

arch/arm/mach-omap1/board-osk.c

@@ -560,7 +560,7 @@ static void __init osk_init(void)
 	l |= (3 << 1);
 	omap_writel(l, USB_TRANSCEIVER_CTRL);
 
-	omap_usb_init(&osk_usb_config);
+	omap1_usb_init(&osk_usb_config);
 
 	/* irq for tps65010 chip */
 	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */

arch/arm/mach-omap1/board-palmte.c

@@ -359,7 +359,7 @@ static void __init omap_palmte_init(void)
 	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
 	palmte_misc_gpio_setup();
 	omap_serial_init();
-	omap_usb_init(&palmte_usb_config);
+	omap1_usb_init(&palmte_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 

arch/arm/mach-omap1/board-palmtt.c

@@ -307,7 +307,7 @@ static void __init omap_palmtt_init(void)
 
 	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
 	omap_serial_init();
-	omap_usb_init(&palmtt_usb_config);
+	omap1_usb_init(&palmtt_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 

arch/arm/mach-omap1/board-palmz71.c

@@ -325,7 +325,7 @@ omap_palmz71_init(void)
 
 	spi_register_board_info(palmz71_boardinfo,
 				ARRAY_SIZE(palmz71_boardinfo));
-	omap_usb_init(&palmz71_usb_config);
+	omap1_usb_init(&palmz71_usb_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	palmz71_gpio_setup(0);

arch/arm/mach-omap1/board-sx1.c

@@ -392,7 +392,7 @@ static void __init omap_sx1_init(void)
 	omap_board_config_size = ARRAY_SIZE(sx1_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
-	omap_usb_init(&sx1_usb_config);
+	omap1_usb_init(&sx1_usb_config);
 	sx1_mmc_init();
 
 	/* turn on USB power */

arch/arm/mach-omap1/board-voiceblue.c

@@ -198,7 +198,7 @@ static void __init voiceblue_init(void)
 	omap_board_config = voiceblue_config;
 	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
 	omap_serial_init();
-	omap_usb_init(&voiceblue_usb_config);
+	omap1_usb_init(&voiceblue_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
 	/* There is a good chance board is going up, so enable power LED

arch/arm/plat-omap/include/plat/usb.h

@@ -81,8 +81,28 @@ extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
 
 #endif
 
+
+/*
+ * FIXME correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#ifdef	CONFIG_USB_GADGET_OMAP
+#define	is_usb0_device(config)	1
+#else
+#define	is_usb0_device(config)	0
+#endif
+
 void omap_otg_init(struct omap_usb_config *config);
-void omap_usb_init(struct omap_usb_config *pdata);
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
 void omap2_usbfs_init(struct omap_usb_config *pdata);
 #else
 static inline omap2_usbfs_init(struct omap_usb_config *pdata)
@@ -199,4 +219,24 @@ static inline omap2_usbfs_init(struct omap_usb_config *pdata)
 #	define	USB0PUENACTLOI		(1 << 16)
 #	define	USBSTANDBYCTRL		(1 << 15)
 
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
+u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
+u32 omap1_usb1_init(unsigned nwires);
+u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
+#else
+static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
+{
+	return 0;
+}
+static inline u32 omap1_usb1_init(unsigned nwires)
+{
+	return 0;
+
+}
+static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+	return 0;
+}
+#endif
+
 #endif	/* __ASM_ARCH_OMAP_USB_H */