Merge branch 'timecounter-next'

Richard Cochran says:

====================
Fixing the "Time Counter fixes and improvements"

For this series I had only tested the build with ARCH=x86 and arm, but
others like sparc64, microblaze, powerpc, and s390 will fail because
they somehow don't indirectly include clocksource.h for the drivers in
question.

This series fixes the build issues reported by:
 kbuild test robot <fengguang.wu@intel.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/microblaze/kernel/timer.c

@@ -17,6 +17,7 @@
 #include <linux/clockchips.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/timecounter.h>
 #include <asm/cpuinfo.h>
 
 static void __iomem *timer_baseaddr;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -14610,7 +14610,7 @@ static void bnx2x_init_cyclecounter(struct bnx2x *bp)
 {
 	memset(&bp->cyclecounter, 0, sizeof(bp->cyclecounter));
 	bp->cyclecounter.read = bnx2x_cyclecounter_read;
-	bp->cyclecounter.mask = CLOCKSOURCE_MASK(64);
+	bp->cyclecounter.mask = CYCLECOUNTER_MASK(64);
 	bp->cyclecounter.shift = 1;
 	bp->cyclecounter.mult = 1;
 }

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -43,7 +43,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/aer.h>
 #include <linux/prefetch.h>
-#include <linux/clocksource.h>
 
 #include "e1000.h"
 
@@ -4190,7 +4189,7 @@ static int e1000_sw_init(struct e1000_adapter *adapter)
 	/* Setup hardware time stamping cyclecounter */
 	if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
 		adapter->cc.read = e1000e_cyclecounter_read;
-		adapter->cc.mask = CLOCKSOURCE_MASK(64);
+		adapter->cc.mask = CYCLECOUNTER_MASK(64);
 		adapter->cc.mult = 1;
 		/* cc.shift set in e1000e_get_base_tininca() */
 

drivers/net/ethernet/intel/igb/igb_ptp.c

@@ -19,7 +19,6 @@
 #include <linux/device.h>
 #include <linux/pci.h>
 #include <linux/ptp_classify.h>
-#include <linux/clocksource.h>
 
 #include "igb.h"
 
@@ -766,7 +765,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
 		adapter->ptp_caps.settime = igb_ptp_settime_82576;
 		adapter->ptp_caps.enable = igb_ptp_feature_enable;
 		adapter->cc.read = igb_ptp_read_82576;
-		adapter->cc.mask = CLOCKSOURCE_MASK(64);
+		adapter->cc.mask = CYCLECOUNTER_MASK(64);
 		adapter->cc.mult = 1;
 		adapter->cc.shift = IGB_82576_TSYNC_SHIFT;
 		/* Dial the nominal frequency. */
@@ -786,7 +785,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
 		adapter->ptp_caps.settime = igb_ptp_settime_82576;
 		adapter->ptp_caps.enable = igb_ptp_feature_enable;
 		adapter->cc.read = igb_ptp_read_82580;
-		adapter->cc.mask = CLOCKSOURCE_MASK(IGB_NBITS_82580);
+		adapter->cc.mask = CYCLECOUNTER_MASK(IGB_NBITS_82580);
 		adapter->cc.mult = 1;
 		adapter->cc.shift = 0;
 		/* Enable the timer functions by clearing bit 31. */

drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c

@@ -793,7 +793,7 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
 
 	memset(&adapter->cc, 0, sizeof(adapter->cc));
 	adapter->cc.read = ixgbe_ptp_read;
-	adapter->cc.mask = CLOCKSOURCE_MASK(64);
+	adapter->cc.mask = CYCLECOUNTER_MASK(64);
 	adapter->cc.shift = shift;
 	adapter->cc.mult = 1;
 

drivers/net/ethernet/mellanox/mlx4/en_clock.c

@@ -32,6 +32,7 @@
  */
 
 #include <linux/mlx4/device.h>
+#include <linux/clocksource.h>
 
 #include "mlx4_en.h"
 

include/linux/timecounter.h

@@ -19,6 +19,9 @@
 
 #include <linux/types.h>
 
+/* simplify initialization of mask field */
+#define CYCLECOUNTER_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1)
+
 /**
  * struct cyclecounter - hardware abstraction for a free running counter
  *	Provides completely state-free accessors to the underlying hardware.
@@ -29,7 +32,7 @@
  * @read:		returns the current cycle value
  * @mask:		bitmask for two's complement
  *			subtraction of non 64 bit counters,
- *			see CLOCKSOURCE_MASK() helper macro
+ *			see CYCLECOUNTER_MASK() helper macro
  * @mult:		cycle to nanosecond multiplier
  * @shift:		cycle to nanosecond divisor (power of two)
  */