Skip to content

L
linux
Commit ddcce057 authored by Mika Westerberg's avatar Mika Westerberg Committed by Lee Jones
Browse files
Options

platform/x86: intel_pmc_ipc: Start using SCU IPC 

SCU IPC is pretty much the same IPC implemented in the intel_pmc_ipc
driver so drop the duplicate implementation and call directly the SCU
IPC.
Signed-off-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 7e18c89d
Hide whitespace changes
Inline Side-by-side
Showing with 40 additions and 264 deletions
drivers/platform/x86/Kconfig
View file @ ddcce057
......@@ -1330,6 +1330,7 @@ config INTEL_PMC_CORE
config INTEL_PMC_IPC
tristate "Intel PMC IPC Driver"
depends on ACPI && PCI
select INTEL_SCU_IPC
---help---
This driver provides support for PMC control on some Intel platforms.
The PMC is an ARC processor which defines IPC commands for communication
......
drivers/platform/x86/intel_pmc_ipc.c
View file @ ddcce057
......@@ -21,28 +21,10 @@
#include <linux/platform_device.h>
#include <asm/intel_pmc_ipc.h>
#include <asm/intel_scu_ipc.h>
#include <linux/platform_data/itco_wdt.h>
/*
* IPC registers
* The IA write to IPC_CMD command register triggers an interrupt to the ARC,
* The ARC handles the interrupt and services it, writing optional data to
* the IPC1 registers, updates the IPC_STS response register with the status.
*/
#define IPC_CMD 0x00
#define IPC_CMD_MSI BIT(8)
#define IPC_CMD_SIZE 16
#define IPC_CMD_SUBCMD 12
#define IPC_STATUS 0x04
#define IPC_STATUS_IRQ BIT(2)
#define IPC_STATUS_ERR BIT(1)
#define IPC_STATUS_BUSY BIT(0)
#define IPC_SPTR 0x08
#define IPC_DPTR 0x0C
#define IPC_WRITE_BUFFER 0x80
#define IPC_READ_BUFFER 0x90
/* Residency with clock rate at 19.2MHz to usecs */
#define S0IX_RESIDENCY_IN_USECS(d, s) \
({ \
......@@ -51,16 +33,6 @@
result; \
})
/*
* 16-byte buffer for sending data associated with IPC command.
*/
#define IPC_DATA_BUFFER_SIZE 16
#define IPC_LOOP_CNT 3000000
#define IPC_MAX_SEC 3
#define IPC_TRIGGER_MODE_IRQ true
/* exported resources from IFWI */
#define PLAT_RESOURCE_IPC_INDEX 0
#define PLAT_RESOURCE_IPC_SIZE 0x1000
......@@ -103,11 +75,6 @@
static struct intel_pmc_ipc_dev {
struct device *dev;
void __iomem *ipc_base;
bool irq_mode;
int irq;
int cmd;
struct completion cmd_complete;
/* The following PMC BARs share the same ACPI device with the IPC */
resource_size_t acpi_io_base;
......@@ -132,53 +99,6 @@ static struct intel_pmc_ipc_dev {
struct platform_device *telemetry_dev;
} ipcdev;
static char *ipc_err_sources[] = {
[IPC_ERR_NONE] =
"no error",
[IPC_ERR_CMD_NOT_SUPPORTED] =
"command not supported",
[IPC_ERR_CMD_NOT_SERVICED] =
"command not serviced",
[IPC_ERR_UNABLE_TO_SERVICE] =
"unable to service",
[IPC_ERR_CMD_INVALID] =
"command invalid",
[IPC_ERR_CMD_FAILED] =
"command failed",
[IPC_ERR_EMSECURITY] =
"Invalid Battery",
[IPC_ERR_UNSIGNEDKERNEL] =
"Unsigned kernel",
};
/* Prevent concurrent calls to the PMC */
static DEFINE_MUTEX(ipclock);
static inline void ipc_send_command(u32 cmd)
{
ipcdev.cmd = cmd;
if (ipcdev.irq_mode) {
reinit_completion(&ipcdev.cmd_complete);
cmd |= IPC_CMD_MSI;
}
writel(cmd, ipcdev.ipc_base + IPC_CMD);
}
static inline u32 ipc_read_status(void)
{
return readl(ipcdev.ipc_base + IPC_STATUS);
}
static inline void ipc_data_writel(u32 data, u32 offset)
{
writel(data, ipcdev.ipc_base + IPC_WRITE_BUFFER + offset);
}
static inline u32 ipc_data_readl(u32 offset)
{
return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
}
static inline u64 gcr_data_readq(u32 offset)
{
return readq(ipcdev.gcr_mem_base + offset);
......@@ -274,127 +194,6 @@ static int update_no_reboot_bit(void *priv, bool set)
PMC_CFG_NO_REBOOT_MASK, value);
}
static int intel_pmc_ipc_check_status(void)
{
int status;
int ret = 0;
if (ipcdev.irq_mode) {
if (0 == wait_for_completion_timeout(
&ipcdev.cmd_complete, IPC_MAX_SEC * HZ))
ret = -ETIMEDOUT;
} else {
int loop_count = IPC_LOOP_CNT;
while ((ipc_read_status() & IPC_STATUS_BUSY) && --loop_count)
udelay(1);
if (loop_count == 0)
ret = -ETIMEDOUT;
}
status = ipc_read_status();
if (ret == -ETIMEDOUT) {
dev_err(ipcdev.dev,
"IPC timed out, TS=0x%x, CMD=0x%x\n",
status, ipcdev.cmd);
return ret;
}
if (status & IPC_STATUS_ERR) {
int i;
ret = -EIO;
i = (status >> IPC_CMD_SIZE) & 0xFF;
if (i < ARRAY_SIZE(ipc_err_sources))
dev_err(ipcdev.dev,
"IPC failed: %s, STS=0x%x, CMD=0x%x\n",
ipc_err_sources[i], status, ipcdev.cmd);
else
dev_err(ipcdev.dev,
"IPC failed: unknown, STS=0x%x, CMD=0x%x\n",
status, ipcdev.cmd);
if ((i == IPC_ERR_UNSIGNEDKERNEL) || (i == IPC_ERR_EMSECURITY))
ret = -EACCES;
}
return ret;
}
/**
* intel_pmc_ipc_simple_command() - Simple IPC command
* @cmd: IPC command code.
* @sub: IPC command sub type.
*
* Send a simple IPC command to PMC when don't need to specify
* input/output data and source/dest pointers.
*
* Return: an IPC error code or 0 on success.
*/
static int intel_pmc_ipc_simple_command(int cmd, int sub)
{
int ret;
mutex_lock(&ipclock);
if (ipcdev.dev == NULL) {
mutex_unlock(&ipclock);
return -ENODEV;
}
ipc_send_command(sub << IPC_CMD_SUBCMD | cmd);
ret = intel_pmc_ipc_check_status();
mutex_unlock(&ipclock);
return ret;
}
/**
* intel_pmc_ipc_raw_cmd() - IPC command with data and pointers
* @cmd: IPC command code.
* @sub: IPC command sub type.
* @in: input data of this IPC command.
* @inlen: input data length in bytes.
* @out: output data of this IPC command.
* @outlen: output data length in dwords.
* @sptr: data writing to SPTR register.
* @dptr: data writing to DPTR register.
*
* Send an IPC command to PMC with input/output data and source/dest pointers.
*
* Return: an IPC error code or 0 on success.
*/
static int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen, u32 *out,
u32 outlen, u32 dptr, u32 sptr)
{
u32 wbuf[4] = { 0 };
int ret;
int i;
if (inlen > IPC_DATA_BUFFER_SIZE || outlen > IPC_DATA_BUFFER_SIZE / 4)
return -EINVAL;
mutex_lock(&ipclock);
if (ipcdev.dev == NULL) {
mutex_unlock(&ipclock);
return -ENODEV;
}
memcpy(wbuf, in, inlen);
writel(dptr, ipcdev.ipc_base + IPC_DPTR);
writel(sptr, ipcdev.ipc_base + IPC_SPTR);
/* The input data register is 32bit register and inlen is in Byte */
for (i = 0; i < ((inlen + 3) / 4); i++)
ipc_data_writel(wbuf[i], 4 * i);
ipc_send_command((inlen << IPC_CMD_SIZE) |
(sub << IPC_CMD_SUBCMD) | cmd);
ret = intel_pmc_ipc_check_status();
if (!ret) {
/* out is read from 32bit register and outlen is in 32bit */
for (i = 0; i < outlen; i++)
*out++ = ipc_data_readl(4 * i);
}
mutex_unlock(&ipclock);
return ret;
}
/**
* intel_pmc_ipc_command() - IPC command with input/output data
* @cmd: IPC command code.
......@@ -411,54 +210,32 @@ static int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen, u32 *out,
int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
u32 *out, u32 outlen)
{
return intel_pmc_ipc_raw_cmd(cmd, sub, in, inlen, out, outlen, 0, 0);
return intel_scu_ipc_dev_command(NULL, cmd, sub, in, inlen, out, outlen);
}
EXPORT_SYMBOL_GPL(intel_pmc_ipc_command);
static irqreturn_t ioc(int irq, void *dev_id)
{
int status;
if (ipcdev.irq_mode) {
status = ipc_read_status();
writel(status | IPC_STATUS_IRQ, ipcdev.ipc_base + IPC_STATUS);
}
complete(&ipcdev.cmd_complete);
return IRQ_HANDLED;
}
static int ipc_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct intel_pmc_ipc_dev *pmc = &ipcdev;
struct intel_scu_ipc_data scu_data = {};
struct intel_scu_ipc_dev *scu;
int ret;
/* Only one PMC is supported */
if (pmc->dev)
return -EBUSY;
pmc->irq_mode = IPC_TRIGGER_MODE_IRQ;
spin_lock_init(&ipcdev.gcr_lock);
ret = pcim_enable_device(pdev);
if (ret)
return ret;
ret = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
if (ret)
return ret;
init_completion(&pmc->cmd_complete);
pmc->ipc_base = pcim_iomap_table(pdev)[0];
scu_data.mem = pdev->resource[0];
ret = devm_request_irq(&pdev->dev, pdev->irq, ioc, 0, "intel_pmc_ipc",
pmc);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq\n");
return ret;
}
scu = devm_intel_scu_ipc_register(&pdev->dev, &scu_data);
if (IS_ERR(scu))
return PTR_ERR(scu);
pmc->dev = &pdev->dev;
......@@ -485,6 +262,7 @@ static ssize_t intel_pmc_ipc_simple_cmd_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct intel_scu_ipc_dev *scu = dev_get_drvdata(dev);
int subcmd;
int cmd;
int ret;
......@@ -495,7 +273,7 @@ static ssize_t intel_pmc_ipc_simple_cmd_store(struct device *dev,
return -EINVAL;
}
ret = intel_pmc_ipc_simple_command(cmd, subcmd);
ret = intel_scu_ipc_dev_simple_command(scu, cmd, subcmd);
if (ret) {
dev_err(dev, "command %d error with %d\n", cmd, ret);
return ret;
......@@ -508,6 +286,7 @@ static ssize_t intel_pmc_ipc_northpeak_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct intel_scu_ipc_dev *scu = dev_get_drvdata(dev);
unsigned long val;
int subcmd;
int ret;
......@@ -520,7 +299,7 @@ static ssize_t intel_pmc_ipc_northpeak_store(struct device *dev,
subcmd = 1;
else
subcmd = 0;
ret = intel_pmc_ipc_simple_command(PMC_IPC_NORTHPEAK_CTRL, subcmd);
ret = intel_scu_ipc_dev_simple_command(scu, PMC_IPC_NORTHPEAK_CTRL, subcmd);
if (ret) {
dev_err(dev, "command north %d error with %d\n", subcmd, ret);
return ret;
......@@ -714,9 +493,11 @@ static int ipc_create_pmc_devices(void)
return ret;
}
static int ipc_plat_get_res(struct platform_device *pdev)
static int ipc_plat_get_res(struct platform_device *pdev,
struct intel_scu_ipc_data *scu_data)
{
struct resource *res, *punit_res = punit_res_array;
resource_size_t start;
void __iomem *addr;
int size;
......@@ -785,23 +566,30 @@ static int ipc_plat_get_res(struct platform_device *pdev)
dev_info(&pdev->dev, "punit GTD interface res: %pR\n", res);
}
scu_data->irq = platform_get_irq(pdev, 0);
res = platform_get_resource(pdev, IORESOURCE_MEM,
PLAT_RESOURCE_IPC_INDEX);
if (!res) {
dev_err(&pdev->dev, "Failed to get ipc resource\n");
return -ENXIO;
}
size = PLAT_RESOURCE_IPC_SIZE + PLAT_RESOURCE_GCR_SIZE;
res->end = res->start + size - 1;
dev_info(&pdev->dev, "ipc res: %pR\n", res);
addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(addr))
return PTR_ERR(addr);
scu_data->mem.flags = res->flags;
scu_data->mem.start = res->start;
scu_data->mem.end = res->start + PLAT_RESOURCE_IPC_SIZE - 1;
ipcdev.ipc_base = addr;
start = res->start + PLAT_RESOURCE_GCR_OFFSET;
if (!devm_request_mem_region(&pdev->dev, start, PLAT_RESOURCE_GCR_SIZE,
"pmc_ipc_plat"))
return -EBUSY;
ipcdev.gcr_mem_base = addr + PLAT_RESOURCE_GCR_OFFSET;
dev_info(&pdev->dev, "ipc res: %pR\n", res);
addr = devm_ioremap(&pdev->dev, start, PLAT_RESOURCE_GCR_SIZE);
if (!addr)
return -ENOMEM;
ipcdev.gcr_mem_base = addr;
ipcdev.telem_res_inval = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM,
......@@ -854,51 +642,38 @@ MODULE_DEVICE_TABLE(acpi, ipc_acpi_ids);
static int ipc_plat_probe(struct platform_device *pdev)
{
struct intel_scu_ipc_data scu_data = {};
struct intel_scu_ipc_dev *scu;
int ret;
ipcdev.dev = &pdev->dev;
ipcdev.irq_mode = IPC_TRIGGER_MODE_IRQ;
init_completion(&ipcdev.cmd_complete);
spin_lock_init(&ipcdev.gcr_lock);
ipcdev.irq = platform_get_irq(pdev, 0);
if (ipcdev.irq < 0)
return -EINVAL;
ret = ipc_plat_get_res(pdev);
ret = ipc_plat_get_res(pdev, &scu_data);
if (ret) {
dev_err(&pdev->dev, "Failed to request resource\n");
return ret;
}
scu = devm_intel_scu_ipc_register(&pdev->dev, &scu_data);
if (IS_ERR(scu))
return PTR_ERR(scu);
platform_set_drvdata(pdev, scu);
ret = ipc_create_pmc_devices();
if (ret) {
dev_err(&pdev->dev, "Failed to create pmc devices\n");
return ret;
}
if (devm_request_irq(&pdev->dev, ipcdev.irq, ioc, IRQF_NO_SUSPEND,
"intel_pmc_ipc", &ipcdev)) {
dev_err(&pdev->dev, "Failed to request irq\n");
ret = -EBUSY;
goto err_irq;
}
ipcdev.has_gcr_regs = true;
return 0;
err_irq:
platform_device_unregister(ipcdev.tco_dev);
platform_device_unregister(ipcdev.punit_dev);
platform_device_unregister(ipcdev.telemetry_dev);
return ret;
}
static int ipc_plat_remove(struct platform_device *pdev)
{
devm_free_irq(&pdev->dev, ipcdev.irq, &ipcdev);
platform_device_unregister(ipcdev.tco_dev);
platform_device_unregister(ipcdev.punit_dev);
platform_device_unregister(ipcdev.telemetry_dev);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7