docs: fix ext4 documentation table formatting problems

It turns out that the latex table formatters lay out table columns with
the exact proportional widths given in the table metadata, even if text
overflows outside the box.  This was not caught during the initial
import because the HTML renderers are smart enough to fudge the table.

Fix the table column width formatting problems in the data structures
and algorithms documentation so that we don't have squashed columns.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Documentation/filesystems/ext4/ondisk/attributes.rst

@@ -30,7 +30,7 @@ Extended attributes, when stored after the inode, have a header
 ``ext4_xattr_ibody_header`` that is 4 bytes long:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -47,7 +47,7 @@ The beginning of an extended attribute block is in
 ``struct ext4_xattr_header``, which is 32 bytes long:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -92,7 +92,7 @@ entries must be stored in sorted order. The sort order is
 Attributes stored inside an inode do not need be stored in sorted order.
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -157,7 +157,7 @@ attribute name index field is set, and matching string is removed from
 the key name. Here is a map of name index values to key prefixes:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Name Index

Documentation/filesystems/ext4/ondisk/checksums.rst

@@ -28,7 +28,7 @@ of checksum. The checksum function is whatever the superblock describes
 (crc32c as of October 2013) unless noted otherwise.
 
 .. list-table::
-   :widths: 1 1 4
+   :widths: 20 8 50
    :header-rows: 1
 
    * - Metadata

Documentation/filesystems/ext4/ondisk/directory.rst

@@ -34,7 +34,7 @@ is at most 263 bytes long, though on disk you'll need to reference
 ``dirent.rec_len`` to know for sure.
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -66,7 +66,7 @@ tree traversal. This format is ``ext4_dir_entry_2``, which is at most
 ``dirent.rec_len`` to know for sure.
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -99,7 +99,7 @@ tree traversal. This format is ``ext4_dir_entry_2``, which is at most
 The directory file type is one of the following values:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -130,7 +130,7 @@ in the place where the name normally goes. The structure is
 ``struct ext4_dir_entry_tail``:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -212,7 +212,7 @@ The root of the htree is in ``struct dx_root``, which is the full length
 of a data block:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -305,7 +305,7 @@ of a data block:
 The directory hash is one of the following values:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -327,7 +327,7 @@ Interior nodes of an htree are recorded as ``struct dx_node``, which is
 also the full length of a data block:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -375,7 +375,7 @@ The hash maps that exist in both ``struct dx_root`` and
 long:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -405,7 +405,7 @@ directory index (which will ensure that there's space for the checksum.
 The dx\_tail structure is 8 bytes long and looks like this:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset

Documentation/filesystems/ext4/ondisk/group_descr.rst

@@ -43,7 +43,7 @@ entire bitmap.
 The block group descriptor is laid out in ``struct ext4_group_desc``.
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -157,7 +157,7 @@ The block group descriptor is laid out in ``struct ext4_group_desc``.
 Block group flags can be any combination of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value

Documentation/filesystems/ext4/ondisk/ifork.rst

@@ -68,7 +68,7 @@ The extent tree header is recorded in ``struct ext4_extent_header``,
 which is 12 bytes long:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -104,7 +104,7 @@ Internal nodes of the extent tree, also known as index nodes, are
 recorded as ``struct ext4_extent_idx``, and are 12 bytes long:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -134,7 +134,7 @@ Leaf nodes of the extent tree are recorded as ``struct ext4_extent``,
 and are also 12 bytes long:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -174,7 +174,7 @@ including) the checksum itself.
 ``struct ext4_extent_tail`` is 4 bytes long:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset

Documentation/filesystems/ext4/ondisk/inodes.rst

@@ -29,8 +29,9 @@ and the inode structure itself.
 The inode table entry is laid out in ``struct ext4_inode``.
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
+   :class: longtable
 
    * - Offset
      - Size
@@ -176,7 +177,7 @@ The inode table entry is laid out in ``struct ext4_inode``.
 The ``i_mode`` value is a combination of the following flags:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -227,7 +228,7 @@ The ``i_mode`` value is a combination of the following flags:
 The ``i_flags`` field is a combination of these values:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -314,7 +315,7 @@ The ``osd1`` field has multiple meanings depending on the creator:
 Linux:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -331,7 +332,7 @@ Linux:
 Hurd:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -346,7 +347,7 @@ Hurd:
 Masix:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -365,7 +366,7 @@ The ``osd2`` field has multiple meanings depending on the filesystem creator:
 Linux:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -402,7 +403,7 @@ Linux:
 Hurd:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -433,7 +434,7 @@ Hurd:
 Masix:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset

Documentation/filesystems/ext4/ondisk/journal.rst

@@ -48,7 +48,7 @@ Layout
 Generally speaking, the journal has this format:
 
 .. list-table::
-   :widths: 1 1 78
+   :widths: 16 48 16
    :header-rows: 1
 
    * - Superblock
@@ -76,7 +76,7 @@ The journal superblock will be in the next full block after the
 superblock.
 
 .. list-table::
-   :widths: 1 1 1 1 76
+   :widths: 12 12 12 32 12
    :header-rows: 1
 
    * - 1024 bytes of padding
@@ -98,7 +98,7 @@ Every block in the journal starts with a common 12-byte header
 ``struct journal_header_s``:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -124,7 +124,7 @@ Every block in the journal starts with a common 12-byte header
 The journal block type can be any one of:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -154,7 +154,7 @@ The journal superblock is recorded as ``struct journal_superblock_s``,
 which is 1024 bytes long:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -264,7 +264,7 @@ which is 1024 bytes long:
 The journal compat features are any combination of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -278,7 +278,7 @@ The journal compat features are any combination of the following:
 The journal incompat features are any combination of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -306,7 +306,7 @@ Journal checksum type codes are one of the following.  crc32 or crc32c are the
 most likely choices.
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -330,7 +330,7 @@ described by a data structure, but here is the block structure anyway.
 Descriptor blocks consume at least 36 bytes, but use a full block:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -355,7 +355,7 @@ defined as ``struct journal_block_tag3_s``, which looks like the
 following. The size is 16 or 32 bytes.
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -400,7 +400,7 @@ following. The size is 16 or 32 bytes.
 The journal tag flags are any combination of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -421,7 +421,7 @@ is defined as ``struct journal_block_tag_s``, which looks like the
 following. The size is 8, 12, 24, or 28 bytes:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -471,7 +471,7 @@ JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a
 ``struct jbd2_journal_block_tail``, which looks like this:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -513,7 +513,7 @@ Revocation blocks are described in
 length, but use a full block:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -543,7 +543,7 @@ JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the revocation
 block is a ``struct jbd2_journal_revoke_tail``, which has this format:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -567,7 +567,7 @@ The commit block is described by ``struct commit_header``, which is 32
 bytes long (but uses a full block):
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset

Documentation/filesystems/ext4/ondisk/mmp.rst

@@ -32,7 +32,7 @@ The checksum is calculated against the FS UUID and the MMP structure.
 The MMP structure (``struct mmp_struct``) is as follows:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 12 20 40
    :header-rows: 1
 
    * - Offset

Documentation/filesystems/ext4/ondisk/special_inodes.rst

@@ -6,7 +6,7 @@ Special inodes
 ext4 reserves some inode for special features, as follows:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 6 70
    :header-rows: 1
 
    * - inode Number

Documentation/filesystems/ext4/ondisk/super.rst

@@ -19,7 +19,7 @@ The ext4 superblock is laid out as follows in
 ``struct ext4_super_block``:
 
 .. list-table::
-   :widths: 1 1 1 77
+   :widths: 8 8 24 40
    :header-rows: 1
 
    * - Offset
@@ -483,7 +483,7 @@ The ext4 superblock is laid out as follows in
 The superblock state is some combination of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 8 72
    :header-rows: 1
 
    * - Value
@@ -500,7 +500,7 @@ The superblock state is some combination of the following:
 The superblock error policy is one of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 8 72
    :header-rows: 1
 
    * - Value
@@ -517,7 +517,7 @@ The superblock error policy is one of the following:
 The filesystem creator is one of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 8 72
    :header-rows: 1
 
    * - Value
@@ -538,7 +538,7 @@ The filesystem creator is one of the following:
 The superblock revision is one of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 8 72
    :header-rows: 1
 
    * - Value
@@ -556,7 +556,7 @@ The superblock compatible features field is a combination of any of the
 following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -595,7 +595,7 @@ The superblock incompatible features field is a combination of any of the
 following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -647,7 +647,7 @@ The superblock read-only compatible features field is a combination of any of
 the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 16 64
    :header-rows: 1
 
    * - Value
@@ -702,7 +702,7 @@ the following:
 The ``s_def_hash_version`` field is one of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 8 72
    :header-rows: 1
 
    * - Value
@@ -725,7 +725,7 @@ The ``s_def_hash_version`` field is one of the following:
 The ``s_default_mount_opts`` field is any combination of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 8 72
    :header-rows: 1
 
    * - Value
@@ -767,7 +767,7 @@ The ``s_default_mount_opts`` field is any combination of the following:
 The ``s_flags`` field is any combination of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 8 72
    :header-rows: 1
 
    * - Value
@@ -784,7 +784,7 @@ The ``s_flags`` field is any combination of the following:
 The ``s_encrypt_algos`` list can contain any of the following:
 
 .. list-table::
-   :widths: 1 79
+   :widths: 8 72
    :header-rows: 1
 
    * - Value