regulator: gpio-regulator: doc: Fix wrong key gpio-enable

Wrong description in binding document.
Doc use "gpio-enable", but code use "enable-gpio"

In drivers/regulator/gpio-regulator.c
	config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Documentation/devicetree/bindings/regulator/gpio-regulator.txt

@@ -4,7 +4,7 @@ Required properties:
 - compatible		: Must be "regulator-gpio".
 
 Optional properties:
-- gpio-enable		: GPIO to use to enable/disable the regulator.
+- enable-gpio		: GPIO to use to enable/disable the regulator.
 - gpios			: GPIO group used to control voltage.
 - states		: Selection of available voltages and GPIO configs.
 - startup-delay-us	: Startup time in microseconds.
@@ -23,7 +23,7 @@ Example:
 		regulator-max-microvolt = <2600000>;
 		regulator-boot-on;
 
-		gpio-enable = <&gpio0 23 0x4>;
+		enable-gpio = <&gpio0 23 0x4>;
 		gpios = <&gpio0 24 0x4
 			 &gpio0 25 0x4>;
 		states = <1800000 0x3