Merge tag 'for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - Add Spreadtrum SC2731 charger driver

 - bq25890-charger: Add BQ25896 support

 - bq27xxx-battery: Add support for BQ27411

 - qcom-pon: Add pms405 pon support

 - cros-charger: add support for dedicated port

 - misc fixes

* tag 'for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: max8925: mark expected switch fall-through
  power: supply: fix spelling mistake "Gauage" -> "Gauge"
  power: reset: qcom-pon: Add pms405 pon support
  power: supply: bq27xxx: Add support for BQ27411
  power: supply: Add Spreadtrum SC2731 charger support
  dt-bindings: power: Add Spreadtrum SC2731 charger documentation
  power: supply: twl4030_charger: disable eoc interrupt on linear charge
  power: supply: twl4030_charger: fix charging current out-of-bounds
  power: supply: bq25890_charger: fix semicolon.cocci warnings
  power: supply: max8998-charger: Fix platform data retrieval
  power: supply: cros: add support for dedicated port
  mfd: cros: add charger port count command definition
  power: reset: at91-poweroff: do not procede if at91_shdwc is allocated
  power: reset: at91-poweroff: rename at91_shdwc_base member of struct shdwc
  power: reset: at91-poweroff: make sclk part of struct shdwc
  power: reset: at91-poweroff: make mpddrc_base part of struct shdwc
  power: reset: at91-poweroff: use only one poweroff function
  power: reset: at91-poweroff: switch to slow clock before shutdown
  power: reset: convert to SPDX identifiers
  power: supply: ab8500_fg: silence uninitialized variable warnings
  ...

Documentation/devicetree/bindings/power/reset/qcom,pon.txt

@@ -6,7 +6,10 @@ and resin along with the Android reboot-mode.
 This DT node has pwrkey and resin as sub nodes.
 
 Required Properties:
--compatible: "qcom,pm8916-pon"
+-compatible: Must be one of:
+	"qcom,pm8916-pon"
+	"qcom,pms405-pon"
+
 -reg: Specifies the physical address of the pon register
 
 Optional subnode:

Documentation/devicetree/bindings/power/supply/bq25890.txt

 Binding for TI bq25890 Li-Ion Charger
 
+This driver will support the bq25896 and the bq25890. There are other ICs
+in the same family but those have not been tested.
+
 Required properties:
 - compatible: Should contain one of the following:
     * "ti,bq25890"

Documentation/devicetree/bindings/power/supply/bq27xxx.txt

@@ -23,6 +23,7 @@ Required properties:
  * "ti,bq27546" - BQ27546
  * "ti,bq27742" - BQ27742
  * "ti,bq27545" - BQ27545
+ * "ti,bq27411" - BQ27411
  * "ti,bq27421" - BQ27421
  * "ti,bq27425" - BQ27425
  * "ti,bq27426" - BQ27426

Documentation/devicetree/bindings/power/supply/sc2731_charger.txt

+Spreadtrum SC2731 PMIC battery charger binding
+
+Required properties:
+ - compatible: Should be "sprd,sc2731-charger".
+ - reg: Address offset of charger register.
+ - phys: Contains a phandle to the USB phy.
+
+Optional Properties:
+- monitored-battery: phandle of battery characteristics devicetree node.
+  The charger uses the following battery properties:
+- charge-term-current-microamp: current for charge termination phase.
+- constant-charge-voltage-max-microvolt: maximum constant input voltage.
+  See Documentation/devicetree/bindings/power/supply/battery.txt
+
+Example:
+
+	bat: battery {
+		compatible = "simple-battery";
+		charge-term-current-microamp = <120000>;
+		constant-charge-voltage-max-microvolt = <4350000>;
+		......
+	};
+
+	sc2731_pmic: pmic@0 {
+		compatible = "sprd,sc2731";
+		reg = <0>;
+		spi-max-frequency = <26000000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		charger@0 {
+			compatible = "sprd,sc2731-charger";
+			reg = <0x0>;
+			phys = <&ssphy>;
+			monitored-battery = <&bat>;
+		};
+	};

arch/arm/mach-at91/pm_suspend.S

@@ -149,6 +149,14 @@ exit_suspend:
 ENDPROC(at91_pm_suspend_in_sram)
 
 ENTRY(at91_backup_mode)
+	/* Switch the master clock source to slow clock. */
+	ldr	pmc, .pmc_base
+	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
 	/*BUMEN*/
 	ldr	r0, .sfr
 	mov	tmp1, #0x1

drivers/power/reset/at91-sama5d2_shdwc.c

@@ -19,6 +19,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/clk/at91_pmc.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -69,7 +70,10 @@ struct shdwc_config {
 
 struct shdwc {
 	const struct shdwc_config *cfg;
-	void __iomem *at91_shdwc_base;
+	struct clk *sclk;
+	void __iomem *shdwc_base;
+	void __iomem *mpddrc_base;
+	void __iomem *pmc_base;
 };
 
 /*
@@ -77,8 +81,6 @@ struct shdwc {
  * since pm_power_off itself is global.
  */
 static struct shdwc *at91_shdwc;
-static struct clk *sclk;
-static void __iomem *mpddrc_base;
 
 static const unsigned long long sdwc_dbc_period[] = {
 	0, 3, 32, 512, 4096, 32768,
@@ -90,7 +92,7 @@ static void __init at91_wakeup_status(struct platform_device *pdev)
 	u32 reg;
 	char *reason = "unknown";
 
-	reg = readl(shdw->at91_shdwc_base + AT91_SHDW_SR);
+	reg = readl(shdw->shdwc_base + AT91_SHDW_SR);
 
 	dev_dbg(&pdev->dev, "%s: status = %#x\n", __func__, reg);
 
@@ -107,12 +109,6 @@ static void __init at91_wakeup_status(struct platform_device *pdev)
 }
 
 static void at91_poweroff(void)
-{
-	writel(AT91_SHDW_KEY | AT91_SHDW_SHDW,
-	       at91_shdwc->at91_shdwc_base + AT91_SHDW_CR);
-}
-
-static void at91_lpddr_poweroff(void)
 {
 	asm volatile(
 		/* Align to cache lines */
@@ -122,16 +118,29 @@ static void at91_lpddr_poweroff(void)
 		"	ldr	r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
 
 		/* Power down SDRAM0 */
+		"	tst	%0, #0\n\t"
+		"	beq	1f\n\t"
 		"	str	%1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
+
+		/* Switch the master clock source to slow clock. */
+		"1:	ldr	r6, [%4, #" __stringify(AT91_PMC_MCKR) "]\n\t"
+		"	bic	r6, r6,  #" __stringify(AT91_PMC_CSS) "\n\t"
+		"	str	r6, [%4, #" __stringify(AT91_PMC_MCKR) "]\n\t"
+		/* Wait for clock switch. */
+		"2:	ldr	r6, [%4, #" __stringify(AT91_PMC_SR) "]\n\t"
+		"	tst	r6, #"	    __stringify(AT91_PMC_MCKRDY) "\n\t"
+		"	beq	2b\n\t"
+
 		/* Shutdown CPU */
 		"	str	%3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
 
 		"	b	.\n\t"
 		:
-		: "r" (mpddrc_base),
+		: "r" (at91_shdwc->mpddrc_base),
 		  "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
-		  "r" (at91_shdwc->at91_shdwc_base),
-		  "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW)
+		  "r" (at91_shdwc->shdwc_base),
+		  "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW),
+		  "r" (at91_shdwc->pmc_base)
 		: "r6");
 }
 
@@ -213,10 +222,10 @@ static void at91_shdwc_dt_configure(struct platform_device *pdev)
 		mode |= SHDW_RTCWKEN(shdw->cfg);
 
 	dev_dbg(&pdev->dev, "%s: mode = %#x\n", __func__, mode);
-	writel(mode, shdw->at91_shdwc_base + AT91_SHDW_MR);
+	writel(mode, shdw->shdwc_base + AT91_SHDW_MR);
 
 	input = at91_shdwc_get_wakeup_input(pdev, np);
-	writel(input, shdw->at91_shdwc_base + AT91_SHDW_WUIR);
+	writel(input, shdw->shdwc_base + AT91_SHDW_WUIR);
 }
 
 static const struct shdwc_config sama5d2_shdwc_config = {
@@ -246,6 +255,9 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 	if (!pdev->dev.of_node)
 		return -ENODEV;
 
+	if (at91_shdwc)
+		return -EBUSY;
+
 	at91_shdwc = devm_kzalloc(&pdev->dev, sizeof(*at91_shdwc), GFP_KERNEL);
 	if (!at91_shdwc)
 		return -ENOMEM;
@@ -253,20 +265,20 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, at91_shdwc);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	at91_shdwc->at91_shdwc_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(at91_shdwc->at91_shdwc_base)) {
+	at91_shdwc->shdwc_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(at91_shdwc->shdwc_base)) {
 		dev_err(&pdev->dev, "Could not map reset controller address\n");
-		return PTR_ERR(at91_shdwc->at91_shdwc_base);
+		return PTR_ERR(at91_shdwc->shdwc_base);
 	}
 
 	match = of_match_node(at91_shdwc_of_match, pdev->dev.of_node);
 	at91_shdwc->cfg = match->data;
 
-	sclk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(sclk))
-		return PTR_ERR(sclk);
+	at91_shdwc->sclk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(at91_shdwc->sclk))
+		return PTR_ERR(at91_shdwc->sclk);
 
-	ret = clk_prepare_enable(sclk);
+	ret = clk_prepare_enable(at91_shdwc->sclk);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not enable slow clock\n");
 		return ret;
@@ -276,41 +288,70 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 
 	at91_shdwc_dt_configure(pdev);
 
-	pm_power_off = at91_poweroff;
+	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-pmc");
+	if (!np) {
+		ret = -ENODEV;
+		goto clk_disable;
+	}
+
+	at91_shdwc->pmc_base = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!at91_shdwc->pmc_base) {
+		ret = -ENOMEM;
+		goto clk_disable;
+	}
 
 	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
-	if (!np)
-		return 0;
+	if (!np) {
+		ret = -ENODEV;
+		goto unmap;
+	}
 
-	mpddrc_base = of_iomap(np, 0);
+	at91_shdwc->mpddrc_base = of_iomap(np, 0);
 	of_node_put(np);
 
-	if (!mpddrc_base)
-		return 0;
+	if (!at91_shdwc->mpddrc_base) {
+		ret = -ENOMEM;
+		goto unmap;
+	}
+
+	pm_power_off = at91_poweroff;
 
-	ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) & AT91_DDRSDRC_MD;
-	if ((ddr_type == AT91_DDRSDRC_MD_LPDDR2) ||
-	    (ddr_type == AT91_DDRSDRC_MD_LPDDR3))
-		pm_power_off = at91_lpddr_poweroff;
-	else
-		iounmap(mpddrc_base);
+	ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
+			 AT91_DDRSDRC_MD;
+	if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
+	    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
+		iounmap(at91_shdwc->mpddrc_base);
+		at91_shdwc->mpddrc_base = NULL;
+	}
 
 	return 0;
+
+unmap:
+	iounmap(at91_shdwc->pmc_base);
+clk_disable:
+	clk_disable_unprepare(at91_shdwc->sclk);
+
+	return ret;
 }
 
 static int __exit at91_shdwc_remove(struct platform_device *pdev)
 {
 	struct shdwc *shdw = platform_get_drvdata(pdev);
 
-	if (pm_power_off == at91_poweroff ||
-	    pm_power_off == at91_lpddr_poweroff)
+	if (pm_power_off == at91_poweroff)
 		pm_power_off = NULL;
 
 	/* Reset values to disable wake-up features  */
-	writel(0, shdw->at91_shdwc_base + AT91_SHDW_MR);
-	writel(0, shdw->at91_shdwc_base + AT91_SHDW_WUIR);
+	writel(0, shdw->shdwc_base + AT91_SHDW_MR);
+	writel(0, shdw->shdwc_base + AT91_SHDW_WUIR);
+
+	if (shdw->mpddrc_base)
+		iounmap(shdw->mpddrc_base);
+	iounmap(shdw->pmc_base);
 
-	clk_disable_unprepare(sclk);
+	clk_disable_unprepare(shdw->sclk);
 
 	return 0;
 }

drivers/power/reset/qcom-pon.c

@@ -74,6 +74,7 @@ static int pm8916_pon_probe(struct platform_device *pdev)
 
 static const struct of_device_id pm8916_pon_id_table[] = {
 	{ .compatible = "qcom,pm8916-pon" },
+	{ .compatible = "qcom,pms405-pon" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);

drivers/power/reset/rmobile-reset.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Renesas R-Mobile Reset Driver
  *
  * Copyright (C) 2014 Glider bvba
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
  */
 
 #include <linux/io.h>

drivers/power/supply/Kconfig

@@ -645,4 +645,11 @@ config CHARGER_CROS_USBPD
 	  what is connected to USB PD ports from the EC and converts
 	  that into power_supply properties.
 
+config CHARGER_SC2731
+	tristate "Spreadtrum SC2731 charger driver"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	help
+	 Say Y here to enable support for battery charging with SC2731
+	 PMIC chips.
+
 endif # POWER_SUPPLY

drivers/power/supply/Makefile

@@ -85,3 +85,4 @@ obj-$(CONFIG_CHARGER_TPS65217)	+= tps65217_charger.o
 obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
 obj-$(CONFIG_AXP288_CHARGER)	+= axp288_charger.o
 obj-$(CONFIG_CHARGER_CROS_USBPD)	+= cros_usbpd-charger.o
+obj-$(CONFIG_CHARGER_SC2731)	+= sc2731_charger.o

drivers/power/supply/ab8500_fg.c

@@ -2433,17 +2433,14 @@ static ssize_t charge_full_store(struct ab8500_fg *di, const char *buf,
 				 size_t count)
 {
 	unsigned long charge_full;
-	ssize_t ret;
+	int ret;
 
 	ret = kstrtoul(buf, 10, &charge_full);
+	if (ret)
+		return ret;
 
-	dev_dbg(di->dev, "Ret %zd charge_full %lu", ret, charge_full);
-
-	if (!ret) {
 	di->bat_cap.max_mah = (int) charge_full;
-		ret = count;
-	}
-	return ret;
+	return count;
 }
 
 static ssize_t charge_now_show(struct ab8500_fg *di, char *buf)
@@ -2455,20 +2452,16 @@ static ssize_t charge_now_store(struct ab8500_fg *di, const char *buf,
 				 size_t count)
 {
 	unsigned long charge_now;
-	ssize_t ret;
+	int ret;
 
 	ret = kstrtoul(buf, 10, &charge_now);
+	if (ret)
+		return ret;
 
-	dev_dbg(di->dev, "Ret %zd charge_now %lu was %d",
-		ret, charge_now, di->bat_cap.prev_mah);
-
-	if (!ret) {
 	di->bat_cap.user_mah = (int) charge_now;
 	di->flags.user_cap = true;
-		ret = count;
 	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
-	}
-	return ret;
+	return count;
 }
 
 static struct ab8500_fg_sysfs_entry charge_full_attr =
@@ -2582,11 +2575,12 @@ static ssize_t ab8505_powercut_flagtime_write(struct device *dev,
 				  const char *buf, size_t count)
 {
 	int ret;
-	long unsigned reg_value;
+	int reg_value;
 	struct power_supply *psy = dev_get_drvdata(dev);
 	struct ab8500_fg *di = power_supply_get_drvdata(psy);
 
-	reg_value = simple_strtoul(buf, NULL, 10);
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
 
 	if (reg_value > 0x7F) {
 		dev_err(dev, "Incorrect parameter, echo 0 (1.98s) - 127 (15.625ms) for flagtime\n");
@@ -2636,7 +2630,9 @@ static ssize_t ab8505_powercut_maxtime_write(struct device *dev,
 	struct power_supply *psy = dev_get_drvdata(dev);
 	struct ab8500_fg *di = power_supply_get_drvdata(psy);
 
-	reg_value = simple_strtoul(buf, NULL, 10);
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
 	if (reg_value > 0x7F) {
 		dev_err(dev, "Incorrect parameter, echo 0 (0.0s) - 127 (1.98s) for maxtime\n");
 		goto fail;
@@ -2684,7 +2680,9 @@ static ssize_t ab8505_powercut_restart_write(struct device *dev,
 	struct power_supply *psy = dev_get_drvdata(dev);
 	struct ab8500_fg *di = power_supply_get_drvdata(psy);
 
-	reg_value = simple_strtoul(buf, NULL, 10);
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
 	if (reg_value > 0xF) {
 		dev_err(dev, "Incorrect parameter, echo 0 - 15 for number of restart\n");
 		goto fail;
@@ -2777,7 +2775,9 @@ static ssize_t ab8505_powercut_write(struct device *dev,
 	struct power_supply *psy = dev_get_drvdata(dev);
 	struct ab8500_fg *di = power_supply_get_drvdata(psy);
 
-	reg_value = simple_strtoul(buf, NULL, 10);
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
 	if (reg_value > 0x1) {
 		dev_err(dev, "Incorrect parameter, echo 0/1 to disable/enable Pcut feature\n");
 		goto fail;
@@ -2849,7 +2849,9 @@ static ssize_t ab8505_powercut_debounce_write(struct device *dev,
 	struct power_supply *psy = dev_get_drvdata(dev);
 	struct ab8500_fg *di = power_supply_get_drvdata(psy);
 
-	reg_value = simple_strtoul(buf, NULL, 10);
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
 	if (reg_value > 0x7) {
 		dev_err(dev, "Incorrect parameter, echo 0 to 7 for debounce setting\n");
 		goto fail;

drivers/power/supply/bq25890_charger.c

@@ -32,6 +32,7 @@
 #define BQ25890_IRQ_PIN			"bq25890_irq"
 
 #define BQ25890_ID			3
+#define BQ25896_ID			0
 
 enum bq25890_fields {
 	F_EN_HIZ, F_EN_ILIM, F_IILIM,				     /* Reg00 */
@@ -153,8 +154,8 @@ static const struct reg_field bq25890_reg_fields[] = {
 	[F_CONV_RATE]		= REG_FIELD(0x02, 6, 6),
 	[F_BOOSTF]		= REG_FIELD(0x02, 5, 5),
 	[F_ICO_EN]		= REG_FIELD(0x02, 4, 4),
-	[F_HVDCP_EN]		= REG_FIELD(0x02, 3, 3),
-	[F_MAXC_EN]		= REG_FIELD(0x02, 2, 2),
+	[F_HVDCP_EN]		= REG_FIELD(0x02, 3, 3),  // reserved on BQ25896
+	[F_MAXC_EN]		= REG_FIELD(0x02, 2, 2),  // reserved on BQ25896
 	[F_FORCE_DPM]		= REG_FIELD(0x02, 1, 1),
 	[F_AUTO_DPDM_EN]	= REG_FIELD(0x02, 0, 0),
 	/* REG03 */
@@ -163,6 +164,7 @@ static const struct reg_field bq25890_reg_fields[] = {
 	[F_OTG_CFG]		= REG_FIELD(0x03, 5, 5),
 	[F_CHG_CFG]		= REG_FIELD(0x03, 4, 4),
 	[F_SYSVMIN]		= REG_FIELD(0x03, 1, 3),
+	/* MIN_VBAT_SEL on BQ25896 */
 	/* REG04 */
 	[F_PUMPX_EN]		= REG_FIELD(0x04, 7, 7),
 	[F_ICHG]		= REG_FIELD(0x04, 0, 6),
@@ -181,7 +183,7 @@ static const struct reg_field bq25890_reg_fields[] = {
 	[F_CHG_TMR]		= REG_FIELD(0x07, 1, 2),
 	[F_JEITA_ISET]		= REG_FIELD(0x07, 0, 0),
 	/* REG08 */
-	[F_BATCMP]		= REG_FIELD(0x08, 6, 7),
+	[F_BATCMP]		= REG_FIELD(0x08, 6, 7), // 5-7 on BQ25896
 	[F_VCLAMP]		= REG_FIELD(0x08, 2, 4),
 	[F_TREG]		= REG_FIELD(0x08, 0, 1),
 	/* REG09 */
@@ -195,12 +197,13 @@ static const struct reg_field bq25890_reg_fields[] = {
 	[F_PUMPX_DN]		= REG_FIELD(0x09, 0, 0),
 	/* REG0A */
 	[F_BOOSTV]		= REG_FIELD(0x0A, 4, 7),
+	/* PFM_OTG_DIS 3 on BQ25896 */
 	[F_BOOSTI]		= REG_FIELD(0x0A, 0, 2),
 	/* REG0B */
 	[F_VBUS_STAT]		= REG_FIELD(0x0B, 5, 7),
 	[F_CHG_STAT]		= REG_FIELD(0x0B, 3, 4),
 	[F_PG_STAT]		= REG_FIELD(0x0B, 2, 2),
-	[F_SDP_STAT]		= REG_FIELD(0x0B, 1, 1),
+	[F_SDP_STAT]		= REG_FIELD(0x0B, 1, 1), // reserved on BQ25896
 	[F_VSYS_STAT]		= REG_FIELD(0x0B, 0, 0),
 	/* REG0C */
 	[F_WD_FAULT]		= REG_FIELD(0x0C, 7, 7),
@@ -244,10 +247,7 @@ enum bq25890_table_ids {
 	/* range tables */
 	TBL_ICHG,
 	TBL_ITERM,
-	TBL_IPRECHG,
 	TBL_VREG,
-	TBL_BATCMP,
-	TBL_VCLAMP,
 	TBL_BOOSTV,
 	TBL_SYSVMIN,
 
@@ -287,8 +287,6 @@ static const union {
 	[TBL_ICHG] =	{ .rt = {0,	  5056000, 64000} },	 /* uA */
 	[TBL_ITERM] =	{ .rt = {64000,   1024000, 64000} },	 /* uA */
 	[TBL_VREG] =	{ .rt = {3840000, 4608000, 16000} },	 /* uV */
-	[TBL_BATCMP] =	{ .rt = {0,	  140,     20} },	 /* mOhm */
-	[TBL_VCLAMP] =	{ .rt = {0,	  224000,  32000} },	 /* uV */
 	[TBL_BOOSTV] =	{ .rt = {4550000, 5510000, 64000} },	 /* uV */
 	[TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} },	 /* uV */
 
@@ -401,6 +399,16 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
 		val->strval = BQ25890_MANUFACTURER;
 		break;
 
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		if (bq->chip_id == BQ25890_ID)
+			val->strval = "BQ25890";
+		else if (bq->chip_id == BQ25896_ID)
+			val->strval = "BQ25896";
+		else
+			val->strval = "UNKNOWN";
+
+		break;
+
 	case POWER_SUPPLY_PROP_ONLINE:
 		val->intval = state.online;
 		break;
@@ -453,6 +461,15 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
 		val->intval = bq25890_find_val(bq->init_data.iterm, TBL_ITERM);
 		break;
 
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = bq25890_field_read(bq, F_SYSV); /* read measured value */
+		if (ret < 0)
+			return ret;
+
+		/* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
+		val->intval = 2304000 + ret * 20000;
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -608,30 +625,40 @@ static int bq25890_hw_init(struct bq25890_device *bq)
 	};
 
 	ret = bq25890_chip_reset(bq);
-	if (ret < 0)
+	if (ret < 0) {
+		dev_dbg(bq->dev, "Reset failed %d\n", ret);
 		return ret;
+	}
 
 	/* disable watchdog */
 	ret = bq25890_field_write(bq, F_WD, 0);
-	if (ret < 0)
+	if (ret < 0) {
+		dev_dbg(bq->dev, "Disabling watchdog failed %d\n", ret);
 		return ret;
+	}
 
 	/* initialize currents/voltages and other parameters */
 	for (i = 0; i < ARRAY_SIZE(init_data); i++) {
 		ret = bq25890_field_write(bq, init_data[i].id,
 					  init_data[i].value);
-		if (ret < 0)
+		if (ret < 0) {
+			dev_dbg(bq->dev, "Writing init data failed %d\n", ret);
 			return ret;
 		}
+	}
 
 	/* Configure ADC for continuous conversions. This does not enable it. */
 	ret = bq25890_field_write(bq, F_CONV_RATE, 1);
-	if (ret < 0)
+	if (ret < 0) {
+		dev_dbg(bq->dev, "Config ADC failed %d\n", ret);
 		return ret;
+	}
 
 	ret = bq25890_get_chip_state(bq, &state);
-	if (ret < 0)
+	if (ret < 0) {
+		dev_dbg(bq->dev, "Get state failed %d\n", ret);
 		return ret;
+	}
 
 	mutex_lock(&bq->lock);
 	bq->state = state;
@@ -642,6 +669,7 @@ static int bq25890_hw_init(struct bq25890_device *bq)
 
 static enum power_supply_property bq25890_power_supply_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_MODEL_NAME,
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_HEALTH,
@@ -650,6 +678,7 @@ static enum power_supply_property bq25890_power_supply_props[] = {
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 };
 
 static char *bq25890_charger_supplied_to[] = {
@@ -767,6 +796,9 @@ static int bq25890_fw_read_u32_props(struct bq25890_device *bq)
 			if (props[i].optional)
 				continue;
 
+			dev_err(bq->dev, "Unable to read property %d %s\n", ret,
+				props[i].name);
+
 			return ret;
 		}
 
@@ -840,7 +872,7 @@ static int bq25890_probe(struct i2c_client *client,
 		return bq->chip_id;
 	}
 
-	if (bq->chip_id != BQ25890_ID) {
+	if ((bq->chip_id != BQ25890_ID) && (bq->chip_id != BQ25896_ID)) {
 		dev_err(dev, "Chip with ID=%d, not supported!\n", bq->chip_id);
 		return -ENODEV;
 	}

drivers/power/supply/bq27xxx_battery.c

@@ -432,6 +432,7 @@ static u8
 		[BQ27XXX_REG_AP] = 0x18,
 		BQ27XXX_DM_REG_ROWS,
 	};
+#define bq27411_regs bq27421_regs
 #define bq27425_regs bq27421_regs
 #define bq27426_regs bq27421_regs
 #define bq27441_regs bq27421_regs
@@ -665,6 +666,7 @@ static enum power_supply_property bq27421_props[] = {
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
+#define bq27411_props bq27421_props
 #define bq27425_props bq27421_props
 #define bq27426_props bq27421_props
 #define bq27441_props bq27421_props
@@ -725,6 +727,12 @@ static struct bq27xxx_dm_reg bq27545_dm_regs[] = {
 #define bq27545_dm_regs 0
 #endif
 
+static struct bq27xxx_dm_reg bq27411_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 82, 10, 2,    0, 32767 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { 82, 12, 2,    0, 32767 },
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 16, 2, 2800,  3700 },
+};
+
 static struct bq27xxx_dm_reg bq27421_dm_regs[] = {
 	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 82, 10, 2,    0,  8000 },
 	[BQ27XXX_DM_DESIGN_ENERGY]     = { 82, 12, 2,    0, 32767 },
@@ -802,6 +810,7 @@ static struct {
 	[BQ27546]   = BQ27XXX_DATA(bq27546,   0         , BQ27XXX_O_OTDC),
 	[BQ27742]   = BQ27XXX_DATA(bq27742,   0         , BQ27XXX_O_OTDC),
 	[BQ27545]   = BQ27XXX_DATA(bq27545,   0x04143672, BQ27XXX_O_OTDC),
+	[BQ27411]   = BQ27XXX_DATA(bq27411,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
 	[BQ27421]   = BQ27XXX_DATA(bq27421,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
 	[BQ27425]   = BQ27XXX_DATA(bq27425,   0x04143672, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP),
 	[BQ27426]   = BQ27XXX_DATA(bq27426,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),

drivers/power/supply/bq27xxx_battery_i2c.c

@@ -247,6 +247,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27546", BQ27546 },
 	{ "bq27742", BQ27742 },
 	{ "bq27545", BQ27545 },
+	{ "bq27411", BQ27411 },
 	{ "bq27421", BQ27421 },
 	{ "bq27425", BQ27425 },
 	{ "bq27426", BQ27426 },
@@ -279,6 +280,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27546" },
 	{ .compatible = "ti,bq27742" },
 	{ .compatible = "ti,bq27545" },
+	{ .compatible = "ti,bq27411" },
 	{ .compatible = "ti,bq27421" },
 	{ .compatible = "ti,bq27425" },
 	{ .compatible = "ti,bq27426" },

drivers/power/supply/cros_usbpd-charger.c

@@ -12,8 +12,12 @@
 #include <linux/power_supply.h>
 #include <linux/slab.h>
 
-#define CHARGER_DIR_NAME			"CROS_USBPD_CHARGER%d"
-#define CHARGER_DIR_NAME_LENGTH			sizeof(CHARGER_DIR_NAME)
+#define CHARGER_USBPD_DIR_NAME			"CROS_USBPD_CHARGER%d"
+#define CHARGER_DEDICATED_DIR_NAME		"CROS_DEDICATED_CHARGER"
+#define CHARGER_DIR_NAME_LENGTH		(sizeof(CHARGER_USBPD_DIR_NAME) >= \
+					 sizeof(CHARGER_DEDICATED_DIR_NAME) ? \
+					 sizeof(CHARGER_USBPD_DIR_NAME) : \
+					 sizeof(CHARGER_DEDICATED_DIR_NAME))
 #define CHARGER_CACHE_UPDATE_DELAY		msecs_to_jiffies(500)
 #define CHARGER_MANUFACTURER_MODEL_LENGTH	32
 
@@ -42,6 +46,7 @@ struct charger_data {
 	struct cros_ec_dev *ec_dev;
 	struct cros_ec_device *ec_device;
 	int num_charger_ports;
+	int num_usbpd_ports;
 	int num_registered_psy;
 	struct port_data *ports[EC_USB_PD_MAX_PORTS];
 	struct notifier_block notifier;
@@ -58,6 +63,12 @@ static enum power_supply_property cros_usbpd_charger_props[] = {
 	POWER_SUPPLY_PROP_USB_TYPE
 };
 
+static enum power_supply_property cros_usbpd_dedicated_charger_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
 static enum power_supply_usb_type cros_usbpd_charger_usb_types[] = {
 	POWER_SUPPLY_USB_TYPE_UNKNOWN,
 	POWER_SUPPLY_USB_TYPE_SDP,
@@ -69,6 +80,11 @@ static enum power_supply_usb_type cros_usbpd_charger_usb_types[] = {
 	POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID
 };
 
+static bool cros_usbpd_charger_port_is_dedicated(struct port_data *port)
+{
+	return port->port_number >= port->charger->num_usbpd_ports;
+}
+
 static int cros_usbpd_charger_ec_command(struct charger_data *charger,
 					 unsigned int version,
 					 unsigned int command,
@@ -102,6 +118,23 @@ static int cros_usbpd_charger_ec_command(struct charger_data *charger,
 }
 
 static int cros_usbpd_charger_get_num_ports(struct charger_data *charger)
+{
+	struct ec_response_charge_port_count resp;
+	int ret;
+
+	ret = cros_usbpd_charger_ec_command(charger, 0,
+					    EC_CMD_CHARGE_PORT_COUNT,
+					    NULL, 0, &resp, sizeof(resp));
+	if (ret < 0) {
+		dev_err(charger->dev,
+			"Unable to get the number of ports (err:0x%x)\n", ret);
+		return ret;
+	}
+
+	return resp.port_count;
+}
+
+static int cros_usbpd_charger_get_usbpd_num_ports(struct charger_data *charger)
 {
 	struct ec_response_usb_pd_ports resp;
 	int ret;
@@ -246,6 +279,9 @@ static int cros_usbpd_charger_get_power_info(struct port_data *port)
 		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
 	}
 
+	if (cros_usbpd_charger_port_is_dedicated(port))
+		port->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
+	else
 		port->psy_desc.type = POWER_SUPPLY_TYPE_USB;
 
 	dev_dbg(dev,
@@ -281,6 +317,7 @@ static int cros_usbpd_charger_get_port_status(struct port_data *port,
 	if (ret < 0)
 		return ret;
 
+	if (!cros_usbpd_charger_port_is_dedicated(port))
 		ret = cros_usbpd_charger_get_discovery_info(port);
 	port->last_update = jiffies;
 
@@ -378,12 +415,10 @@ static int cros_usbpd_charger_ec_event(struct notifier_block *nb,
 {
 	struct cros_ec_device *ec_device;
 	struct charger_data *charger;
-	struct device *dev;
 	u32 host_event;
 
 	charger = container_of(nb, struct charger_data, notifier);
 	ec_device = charger->ec_device;
-	dev = charger->dev;
 
 	host_event = cros_ec_get_host_event(ec_device);
 	if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU)) {
@@ -426,17 +461,56 @@ static int cros_usbpd_charger_probe(struct platform_device *pd)
 
 	platform_set_drvdata(pd, charger);
 
+	/*
+	 * We need to know the number of USB PD ports in order to know whether
+	 * there is a dedicated port. The dedicated port will always be
+	 * after the USB PD ports, and there should be only one.
+	 */
+	charger->num_usbpd_ports =
+		cros_usbpd_charger_get_usbpd_num_ports(charger);
+	if (charger->num_usbpd_ports <= 0) {
+		/*
+		 * This can happen on a system that doesn't support USB PD.
+		 * Log a message, but no need to warn.
+		 */
+		dev_info(dev, "No USB PD charging ports found\n");
+	}
+
 	charger->num_charger_ports = cros_usbpd_charger_get_num_ports(charger);
-	if (charger->num_charger_ports <= 0) {
+	if (charger->num_charger_ports < 0) {
 		/*
 		 * This can happen on a system that doesn't support USB PD.
 		 * Log a message, but no need to warn.
+		 * Older ECs do not support the above command, in that case
+		 * let's set up the number of charger ports equal to the number
+		 * of USB PD ports
+		 */
+		dev_info(dev, "Could not get charger port count\n");
+		charger->num_charger_ports = charger->num_usbpd_ports;
+	}
+
+	if (charger->num_charger_ports <= 0) {
+		/*
+		 * This can happen on a system that doesn't support USB PD and
+		 * doesn't have a dedicated port.
+		 * Log a message, but no need to warn.
 		 */
 		dev_info(dev, "No charging ports found\n");
 		ret = -ENODEV;
 		goto fail_nowarn;
 	}
 
+	/*
+	 * Sanity checks on the number of ports:
+	 *  there should be at most 1 dedicated port
+	 */
+	if (charger->num_charger_ports < charger->num_usbpd_ports ||
+	    charger->num_charger_ports > (charger->num_usbpd_ports + 1)) {
+		dev_err(dev, "Unexpected number of charge port count\n");
+		ret = -EPROTO;
+		goto fail_nowarn;
+	}
+
 	for (i = 0; i < charger->num_charger_ports; i++) {
 		struct power_supply_config psy_cfg = {};
 
@@ -448,21 +522,32 @@ static int cros_usbpd_charger_probe(struct platform_device *pd)
 
 		port->charger = charger;
 		port->port_number = i;
-		sprintf(port->name, CHARGER_DIR_NAME, i);
 
 		psy_desc = &port->psy_desc;
-		psy_desc->name = port->name;
-		psy_desc->type = POWER_SUPPLY_TYPE_USB;
 		psy_desc->get_property = cros_usbpd_charger_get_prop;
 		psy_desc->external_power_changed =
 					cros_usbpd_charger_power_changed;
+		psy_cfg.drv_data = port;
+
+		if (cros_usbpd_charger_port_is_dedicated(port)) {
+			sprintf(port->name, CHARGER_DEDICATED_DIR_NAME);
+			psy_desc->type = POWER_SUPPLY_TYPE_MAINS;
+			psy_desc->properties =
+				cros_usbpd_dedicated_charger_props;
+			psy_desc->num_properties =
+				ARRAY_SIZE(cros_usbpd_dedicated_charger_props);
+		} else {
+			sprintf(port->name, CHARGER_USBPD_DIR_NAME, i);
+			psy_desc->type = POWER_SUPPLY_TYPE_USB;
 			psy_desc->properties = cros_usbpd_charger_props;
 			psy_desc->num_properties =
 				ARRAY_SIZE(cros_usbpd_charger_props);
 			psy_desc->usb_types = cros_usbpd_charger_usb_types;
 			psy_desc->num_usb_types =
 				ARRAY_SIZE(cros_usbpd_charger_usb_types);
-		psy_cfg.drv_data = port;
+		}
+
+		psy_desc->name = port->name;
 
 		psy = devm_power_supply_register_no_ws(dev, psy_desc,
 						       &psy_cfg);

drivers/power/supply/ds2780_battery.c

@@ -829,5 +829,5 @@ module_platform_driver(ds2780_battery_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>");
-MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauage IC driver");
+MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC driver");
 MODULE_ALIAS("platform:ds2780-battery");

drivers/power/supply/ds2781_battery.c

@@ -829,6 +829,6 @@ module_platform_driver(ds2781_battery_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>");
-MODULE_DESCRIPTION("Maxim/Dallas DS2781 Stand-Alone Fuel Gauage IC driver");
+MODULE_DESCRIPTION("Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC driver");
 MODULE_ALIAS("platform:ds2781-battery");
 

drivers/power/supply/ds2782_battery.c

@@ -471,5 +471,5 @@ static struct i2c_driver ds278x_battery_driver = {
 module_i2c_driver(ds278x_battery_driver);
 
 MODULE_AUTHOR("Ryan Mallon");
-MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
+MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC driver");
 MODULE_LICENSE("GPL");

drivers/power/supply/max14577_charger.c

-/*
- * max14577_charger.c - Battery charger driver for the Maxim 14577/77836
- *
- * Copyright (C) 2013,2014 Samsung Electronics
- * Krzysztof Kozlowski <krzk@kernel.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max14577_charger.c - Battery charger driver for the Maxim 14577/77836
+//
+// Copyright (C) 2013,2014 Samsung Electronics
+// Krzysztof Kozlowski <krzk@kernel.org>
 
 #include <linux/module.h>
 #include <linux/platform_device.h>

drivers/power/supply/max17040_battery.c

-/*
- *  max17040_battery.c
- *  fuel-gauge systems for lithium-ion (Li+) batteries
- *
- *  Copyright (C) 2009 Samsung Electronics
- *  Minkyu Kang <mk7.kang@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+//  max17040_battery.c
+//  fuel-gauge systems for lithium-ion (Li+) batteries
+//
+//  Copyright (C) 2009 Samsung Electronics
+//  Minkyu Kang <mk7.kang@samsung.com>
 
 #include <linux/module.h>
 #include <linux/init.h>

drivers/power/supply/max17042_battery.c

-/*
- * Fuel gauge driver for Maxim 17042 / 8966 / 8997
- *  Note that Maxim 8966 and 8997 are mfd and this is its subdevice.
- *
- * Copyright (C) 2011 Samsung Electronics
- * MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * This driver is based on max17040_battery.c
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Fuel gauge driver for Maxim 17042 / 8966 / 8997
+//  Note that Maxim 8966 and 8997 are mfd and this is its subdevice.
+//
+// Copyright (C) 2011 Samsung Electronics
+// MyungJoo Ham <myungjoo.ham@samsung.com>
+//
+// This driver is based on max17040_battery.c
 
 #include <linux/acpi.h>
 #include <linux/init.h>

drivers/power/supply/max77693_charger.c

-/*
- * max77693_charger.c - Battery charger driver for the Maxim 77693
- *
- * Copyright (C) 2014 Samsung Electronics
- * Krzysztof Kozlowski <krzk@kernel.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max77693_charger.c - Battery charger driver for the Maxim 77693
+//
+// Copyright (C) 2014 Samsung Electronics
+// Krzysztof Kozlowski <krzk@kernel.org>
 
 #include <linux/module.h>
 #include <linux/platform_device.h>

drivers/power/supply/max8925_power.c

@@ -124,6 +124,7 @@ static irqreturn_t max8925_charger_handler(int irq, void *data)
 	case MAX8925_IRQ_VCHG_THM_OK_F:
 		/* Battery is not ready yet */
 		dev_dbg(chip->dev, "Battery temperature is out of range\n");
+		/* Fall through */
 	case MAX8925_IRQ_VCHG_DC_OVP:
 		dev_dbg(chip->dev, "Error detection\n");
 		__set_charger(info, 0);

drivers/power/supply/max8997_charger.c

-/*
- * max8997_charger.c - Power supply consumer driver for the Maxim 8997/8966
- *
- *  Copyright (C) 2011 Samsung Electronics
- *  MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max8997_charger.c - Power supply consumer driver for the Maxim 8997/8966
+//
+//  Copyright (C) 2011 Samsung Electronics
+//  MyungJoo Ham <myungjoo.ham@samsung.com>
 
 #include <linux/err.h>
 #include <linux/module.h>

drivers/power/supply/max8998_charger.c

-/*
- * max8998_charger.c - Power supply consumer driver for the Maxim 8998/LP3974
- *
- *  Copyright (C) 2009-2010 Samsung Electronics
- *  MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max8998_charger.c - Power supply consumer driver for the Maxim 8998/LP3974
+//
+//  Copyright (C) 2009-2010 Samsung Electronics
+//  MyungJoo Ham <myungjoo.ham@samsung.com>
 
 #include <linux/err.h>
 #include <linux/module.h>
@@ -86,7 +72,7 @@ static const struct power_supply_desc max8998_battery_desc = {
 static int max8998_battery_probe(struct platform_device *pdev)
 {
 	struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct max8998_platform_data *pdata = iodev->pdata;
 	struct power_supply_config psy_cfg = {};
 	struct max8998_battery_data *max8998;
 	struct i2c_client *i2c;

drivers/power/supply/power_supply_sysfs.c

@@ -131,7 +131,8 @@ static ssize_t power_supply_show_property(struct device *dev,
 				dev_dbg(dev, "driver has no data for `%s' property\n",
 					attr->attr.name);
 			else if (ret != -ENODEV && ret != -EAGAIN)
-				dev_err(dev, "driver failed to report `%s' property: %zd\n",
+				dev_err_ratelimited(dev,
+					"driver failed to report `%s' property: %zd\n",
 					attr->attr.name, ret);
 			return ret;
 		}

drivers/power/supply/twl4030_charger.c

@@ -420,6 +420,7 @@ static void twl4030_current_worker(struct work_struct *data)
 
 	if (v < USB_MIN_VOLT) {
 		/* Back up and stop adjusting. */
+		if (bci->usb_cur >= USB_CUR_STEP)
 			bci->usb_cur -= USB_CUR_STEP;
 		bci->usb_cur_target = bci->usb_cur;
 	} else if (bci->usb_cur >= bci->usb_cur_target ||
@@ -439,6 +440,7 @@ static void twl4030_current_worker(struct work_struct *data)
 static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 {
 	int ret;
+	u32 reg;
 
 	if (bci->usb_mode == CHARGE_OFF)
 		enable = false;
@@ -452,14 +454,38 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 			bci->usb_enabled = 1;
 		}
 
-		if (bci->usb_mode == CHARGE_AUTO)
+		if (bci->usb_mode == CHARGE_AUTO) {
+			/* Enable interrupts now. */
+			reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC |
+					TWL4030_TBATOR2 | TWL4030_TBATOR1 |
+					TWL4030_BATSTS);
+			ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+				       TWL4030_INTERRUPTS_BCIIMR1A);
+			if (ret < 0) {
+				dev_err(bci->dev,
+					"failed to unmask interrupts: %d\n",
+					ret);
+				return ret;
+			}
 			/* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
 			ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB);
+		}
 
 		/* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */
 		ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0,
 			TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4);
 		if (bci->usb_mode == CHARGE_LINEAR) {
+			/* Enable interrupts now. */
+			reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_TBATOR2 |
+					TWL4030_TBATOR1 | TWL4030_BATSTS);
+			ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+				       TWL4030_INTERRUPTS_BCIIMR1A);
+			if (ret < 0) {
+				dev_err(bci->dev,
+					"failed to unmask interrupts: %d\n",
+					ret);
+				return ret;
+			}
 			twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0);
 			/* Watch dog key: WOVF acknowledge */
 			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33,

include/linux/mfd/cros_ec_commands.h

@@ -3103,6 +3103,16 @@ struct ec_params_usb_pd_info_request {
 	uint8_t port;
 } __packed;
 
+/*
+ * This command will return the number of USB PD charge port + the number
+ * of dedicated port present.
+ * EC_CMD_USB_PD_PORTS does NOT include the dedicated ports
+ */
+#define EC_CMD_CHARGE_PORT_COUNT 0x0105
+struct ec_response_charge_port_count {
+	uint8_t port_count;
+} __packed;
+
 /* Read USB-PD Device discovery info */
 #define EC_CMD_USB_PD_DISCOVERY 0x0113
 struct ec_params_usb_pd_discovery_entry {

include/linux/power/bq27xxx_battery.h

@@ -24,6 +24,7 @@ enum bq27xxx_chip {
 	BQ27546,
 	BQ27742,
 	BQ27545, /* bq27545 */
+	BQ27411,
 	BQ27421, /* bq27421, bq27441, bq27621 */
 	BQ27425,
 	BQ27426,