Commit df2fec5a authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge kroah.com:/home/greg/linux/BK/bleeding_edge-2.5

into kroah.com:/home/greg/linux/BK/gregkh-2.5
parents 39322528 79c60b51
Parallel link cable for Texas Instruments handhelds
===================================================
Author: Romain Lievin
Homepage: http://lpg.ticalc.org/prj_dev
INTRODUCTION:
This is a driver for the very common home-made parallel link cable, a cable
designed for connecting TI8x/9x graphing calculators (handhelds) to a computer
or workstation (Alpha, Sparc). Given that driver is built on parport, the
parallel port abstraction layer, this driver is independant of the platform.
It can also be used with another device plugged on the same port (such as a
ZIP drive). I have a 100MB ZIP and both of them work fine !
If you need more information, please visit the 'TI drivers' homepage at the URL
above.
WHAT YOU NEED:
A TI calculator of course and a program capable to communicate with your
calculator.
TiLP will work for sure (since I am his developer !). yal92 may be able to use
it by changing tidev for tipar (may require some hacking...).
HOW TO USE IT:
You must have first compiled parport support (CONFIG_PARPORT_DEV): either
compiled in your kernel, either as a module.
This driver supports the new device hierarchy (devfs).
Next, (as root) from your appropriate modules directory (lib/modules/2.5.XX):
modprobe parport
insmod tipar.o
If it is not already there (it usually is), create the device:
mknod /dev/tipar0 c 115 0
mknod /dev/tipar1 c 115 1
mknod /dev/tipar2 c 115 2
You will have to set permissions on this device to allow you to read/write
from it:
chmod 666 /dev/tipar?
Now you are ready to run a linking program such as TiLP. Be sure to configure
it properly (RTFM).
MODULE PARAMETERS:
You can set these with: insmod tipar NAME=VALUE
There is currently no way to set these on a per-cable basis.
NAME: timeout
TYPE: integer
DEFAULT: 15
DESC: Timeout value in tenth of seconds. If no data is available once this
time has expired then the driver will return with a timeout error.
NAME: delay
TYPE: integer
DEFAULT: 10
DESC: Inter-bit delay in micro-seconds. An lower value gives an higher data
rate but makes transmission less reliable.
These parameters can be changed at run time by any program via ioctl(2) calls
as listed in ./include/linux/ticable.h
Rather than write 50 pages describing the ioctl() and so on, it is
perhaps more useful you look at ticables library (dev_link.c) that demonstrates
how to use them, and demonstrates the features of the driver. This is
probably a lot more useful to people interested in writing applications
that will be using this driver.
QUIRKS/BUGS:
None.
HOW TO CONTACT US:
You can email me at roms@lpg.ticalc.org. Please prefix the subject line
with "TIPAR: " so that I am certain to notice your message.
You can also mail JB at jb@jblache.org. He packaged these drivers for Debian.
CREDITS:
The code is based on tidev.c & parport.c.
The driver has been developed independantly of Texas Instruments.
...@@ -284,7 +284,6 @@ tipar_write(struct file *file, const char *buf, size_t count, loff_t * ppos) ...@@ -284,7 +284,6 @@ tipar_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
minor(file->f_dentry->d_inode->i_rdev) - TIPAR_MINOR; minor(file->f_dentry->d_inode->i_rdev) - TIPAR_MINOR;
ssize_t n; ssize_t n;
printk("_write\n");
parport_claim_or_block(table[minor].dev); parport_claim_or_block(table[minor].dev);
for (n = 0; n < count; n++) { for (n = 0; n < count; n++) {
...@@ -321,7 +320,6 @@ tipar_read(struct file *file, char *buf, size_t count, loff_t * ppos) ...@@ -321,7 +320,6 @@ tipar_read(struct file *file, char *buf, size_t count, loff_t * ppos)
if (ppos != &file->f_pos) if (ppos != &file->f_pos)
return -ESPIPE; return -ESPIPE;
printk("_read\n");
parport_claim_or_block(table[minor].dev); parport_claim_or_block(table[minor].dev);
while (n < count) { while (n < count) {
......
...@@ -386,11 +386,11 @@ void cpia_unregister_camera(struct cam_data *cam); ...@@ -386,11 +386,11 @@ void cpia_unregister_camera(struct cam_data *cam);
#define ERROR_FLICKER_BELOW_MIN_EXP 0x01 /*flicker exposure got below minimum exposure */ #define ERROR_FLICKER_BELOW_MIN_EXP 0x01 /*flicker exposure got below minimum exposure */
#define ALOG(fmt,args...) printk(fmt, ##args) #define ALOG(fmt,args...) printk(fmt, ##args)
#define LOG(fmt,args...) ALOG(KERN_INFO __FILE__ ":%s(%d):" fmt, __FUNCTION__, __LINE__, ##args) #define LOG(fmt,args...) ALOG(KERN_INFO __FILE__ ":%s(%d):" fmt, __FUNCTION__ , __LINE__ , ##args)
#ifdef _CPIA_DEBUG_ #ifdef _CPIA_DEBUG_
#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, lineno, ##args) #define ADBG(lineno,fmt,args...) printk(fmt, jiffies, lineno, ##args)
#define DBG(fmt,args...) ADBG((__LINE__),KERN_DEBUG __FILE__"(%ld):"__FUNCTION__"(%d):"fmt,##args) #define DBG(fmt,args...) ADBG((__LINE__), KERN_DEBUG __FILE__" (%ld):" __FUNCTION__ "(%d):" fmt, ##args)
#else #else
#define DBG(fmn,args...) do {} while(0) #define DBG(fmn,args...) do {} while(0)
#endif #endif
......
...@@ -1077,7 +1077,7 @@ static int proc_ioctl (struct dev_state *ps, void *arg) ...@@ -1077,7 +1077,7 @@ static int proc_ioctl (struct dev_state *ps, void *arg)
driver->name, ps->dev->devnum, ctrl.ifno); driver->name, ps->dev->devnum, ctrl.ifno);
usb_device_remove(&ifp->dev); usb_device_remove(&ifp->dev);
} else } else
retval = -EINVAL; retval = -ENODATA;
break; break;
/* let kernel drivers try to (re)bind to the interface */ /* let kernel drivers try to (re)bind to the interface */
......
...@@ -847,7 +847,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) ...@@ -847,7 +847,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
ep &= USB_ENDPOINT_NUMBER_MASK; ep &= USB_ENDPOINT_NUMBER_MASK;
usb_settoggle (dev, ep, out, 0); usb_settoggle (dev, ep, out, 0);
(out ? dev->epmaxpacketout : dev->epmaxpacketin) [ep] (out ? dev->epmaxpacketout : dev->epmaxpacketin) [ep]
= iface_as->endpoint [ep].wMaxPacketSize; = iface_as->endpoint [i].wMaxPacketSize;
} }
return 0; return 0;
......
...@@ -790,6 +790,7 @@ void usb_disconnect(struct usb_device **pdev) ...@@ -790,6 +790,7 @@ void usb_disconnect(struct usb_device **pdev)
usb_disconnect(child); usb_disconnect(child);
} }
dbg ("unregistering interfaces on device %d", dev->devnum);
if (dev->actconfig) { if (dev->actconfig) {
for (i = 0; i < dev->actconfig->bNumInterfaces; i++) { for (i = 0; i < dev->actconfig->bNumInterfaces; i++) {
struct usb_interface *interface = &dev->actconfig->interface[i]; struct usb_interface *interface = &dev->actconfig->interface[i];
...@@ -799,12 +800,13 @@ void usb_disconnect(struct usb_device **pdev) ...@@ -799,12 +800,13 @@ void usb_disconnect(struct usb_device **pdev)
} }
} }
dbg ("unregistering the device %d", dev->devnum);
/* Free the device number and remove the /proc/bus/usb entry */ /* Free the device number and remove the /proc/bus/usb entry */
if (dev->devnum > 0) { if (dev->devnum > 0) {
clear_bit(dev->devnum, dev->bus->devmap.devicemap); clear_bit(dev->devnum, dev->bus->devmap.devicemap);
usbfs_remove_device(dev); usbfs_remove_device(dev);
device_unregister(&dev->dev);
} }
device_unregister(&dev->dev);
/* Decrement the reference count, it'll auto free everything when */ /* Decrement the reference count, it'll auto free everything when */
/* it hits 0 which could very well be now */ /* it hits 0 which could very well be now */
......
...@@ -34,17 +34,6 @@ static void inline lprintk(char *buf) ...@@ -34,17 +34,6 @@ static void inline lprintk(char *buf)
} }
} }
static int inline uhci_is_skeleton_td(struct uhci_hcd *uhci, struct uhci_td *td)
{
int i;
for (i = 0; i < UHCI_NUM_SKELTD; i++)
if (td == uhci->skeltd[i])
return 1;
return 0;
}
static int inline uhci_is_skeleton_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) static int inline uhci_is_skeleton_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
{ {
int i; int i;
...@@ -285,13 +274,14 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space) ...@@ -285,13 +274,14 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space)
return out - buf; return out - buf;
} }
static const char *td_names[] = {"skel_int1_td", "skel_int2_td", static const char *qh_names[] = {
"skel_int4_td", "skel_int8_td", "skel_int128_qh", "skel_int64_qh",
"skel_int16_td", "skel_int32_td", "skel_int32_qh", "skel_int16_qh",
"skel_int64_td", "skel_int128_td", "skel_int8_qh", "skel_int4_qh",
"skel_int256_td", "skel_term_td" }; "skel_int2_qh", "skel_int1_qh",
static const char *qh_names[] = { "skel_ls_control_qh", "skel_hs_control_qh", "skel_ls_control_qh", "skel_hs_control_qh",
"skel_bulk_qh", "skel_term_qh" }; "skel_bulk_qh", "skel_term_qh"
};
#define show_frame_num() \ #define show_frame_num() \
if (!shown) { \ if (!shown) { \
...@@ -299,26 +289,141 @@ static const char *qh_names[] = { "skel_ls_control_qh", "skel_hs_control_qh", ...@@ -299,26 +289,141 @@ static const char *qh_names[] = { "skel_ls_control_qh", "skel_hs_control_qh",
out += sprintf(out, "- Frame %d\n", i); \ out += sprintf(out, "- Frame %d\n", i); \
} }
#define show_td_name() \
if (!shown) { \
shown = 1; \
out += sprintf(out, "- %s\n", td_names[i]); \
}
#define show_qh_name() \ #define show_qh_name() \
if (!shown) { \ if (!shown) { \
shown = 1; \ shown = 1; \
out += sprintf(out, "- %s\n", qh_names[i]); \ out += sprintf(out, "- %s\n", qh_names[i]); \
} }
static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, char *buf, int len)
{
struct list_head *tmp;
char *out = buf;
int count = 0;
if (len < 200)
return 0;
out += sprintf(out, "urb_priv [%p] ", urbp);
out += sprintf(out, "urb [%p] ", urbp->urb);
out += sprintf(out, "qh [%p] ", urbp->qh);
out += sprintf(out, "Dev=%d ", usb_pipedevice(urbp->urb->pipe));
out += sprintf(out, "EP=%x(%s) ", usb_pipeendpoint(urbp->urb->pipe), (usb_pipein(urbp->urb->pipe) ? "IN" : "OUT"));
switch (usb_pipetype(urbp->urb->pipe)) {
case PIPE_ISOCHRONOUS: out += sprintf(out, "ISO "); break;
case PIPE_INTERRUPT: out += sprintf(out, "INT "); break;
case PIPE_BULK: out += sprintf(out, "BLK "); break;
case PIPE_CONTROL: out += sprintf(out, "CTL "); break;
}
out += sprintf(out, "%s", (urbp->fsbr ? "FSBR " : ""));
out += sprintf(out, "%s", (urbp->fsbr_timeout ? "FSBR_TO " : ""));
if (urbp->status != -EINPROGRESS)
out += sprintf(out, "Status=%d ", urbp->status);
//out += sprintf(out, "Inserttime=%lx ",urbp->inserttime);
//out += sprintf(out, "FSBRtime=%lx ",urbp->fsbrtime);
spin_lock(&urbp->urb->lock);
count = 0;
list_for_each(tmp, &urbp->td_list)
count++;
spin_unlock(&urbp->urb->lock);
out += sprintf(out, "TDs=%d ",count);
if (urbp->queued)
out += sprintf(out, "queued\n");
else {
spin_lock(&uhci->frame_list_lock);
count = 0;
list_for_each(tmp, &urbp->queue_list)
count++;
spin_unlock(&uhci->frame_list_lock);
out += sprintf(out, "queued URBs=%d\n", count);
}
return out - buf;
}
static int uhci_show_lists(struct uhci_hcd *uhci, char *buf, int len)
{
char *out = buf;
unsigned long flags;
struct list_head *head, *tmp;
int count;
out += sprintf(out, "Main list URBs:");
spin_lock_irqsave(&uhci->urb_list_lock, flags);
if (list_empty(&uhci->urb_list))
out += sprintf(out, " Empty\n");
else {
out += sprintf(out, "\n");
count = 0;
head = &uhci->urb_list;
tmp = head->next;
while (tmp != head) {
struct urb_priv *urbp = list_entry(tmp, struct urb_priv, urb_list);
out += sprintf(out, " %d: ", ++count);
out += uhci_show_urbp(uhci, urbp, out, len - (out - buf));
tmp = tmp->next;
}
}
spin_unlock_irqrestore(&uhci->urb_list_lock, flags);
out += sprintf(out, "Remove list URBs:");
spin_lock_irqsave(&uhci->urb_remove_list_lock, flags);
if (list_empty(&uhci->urb_remove_list))
out += sprintf(out, " Empty\n");
else {
out += sprintf(out, "\n");
count = 0;
head = &uhci->urb_remove_list;
tmp = head->next;
while (tmp != head) {
struct urb_priv *urbp = list_entry(tmp, struct urb_priv, urb_list);
out += sprintf(out, " %d: ", ++count);
out += uhci_show_urbp(uhci, urbp, out, len - (out - buf));
tmp = tmp->next;
}
}
spin_unlock_irqrestore(&uhci->urb_remove_list_lock, flags);
out += sprintf(out, "Complete list URBs:");
spin_lock_irqsave(&uhci->complete_list_lock, flags);
if (list_empty(&uhci->complete_list))
out += sprintf(out, " Empty\n");
else {
out += sprintf(out, "\n");
count = 0;
head = &uhci->complete_list;
tmp = head->next;
while (tmp != head) {
struct urb_priv *urbp = list_entry(tmp, struct urb_priv, complete_list);
out += sprintf(out, " %d: ", ++count);
out += uhci_show_urbp(uhci, urbp, out, len - (out - buf));
tmp = tmp->next;
}
}
spin_unlock_irqrestore(&uhci->complete_list_lock, flags);
return out - buf;
}
static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
{ {
unsigned long flags;
char *out = buf; char *out = buf;
int i; int i;
struct uhci_qh *qh; struct uhci_qh *qh;
struct uhci_td *td; struct uhci_td *td;
struct list_head *tmp, *head; struct list_head *tmp, *head;
spin_lock_irqsave(&uhci->frame_list_lock, flags);
out += sprintf(out, "HC status\n"); out += sprintf(out, "HC status\n");
out += uhci_show_status(uhci, out, len - (out - buf)); out += uhci_show_status(uhci, out, len - (out - buf));
...@@ -333,8 +438,6 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) ...@@ -333,8 +438,6 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
show_frame_num(); show_frame_num();
out += sprintf(out, " frame list does not match td->dma_handle!\n"); out += sprintf(out, " frame list does not match td->dma_handle!\n");
} }
if (uhci_is_skeleton_td(uhci, td))
continue;
show_frame_num(); show_frame_num();
head = &td->fl_list; head = &td->fl_list;
...@@ -346,67 +449,6 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) ...@@ -346,67 +449,6 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
} while (tmp != head); } while (tmp != head);
} }
out += sprintf(out, "Skeleton TD's\n");
for (i = UHCI_NUM_SKELTD - 1; i >= 0; i--) {
int shown = 0;
td = uhci->skeltd[i];
if (debug > 1) {
show_td_name();
out += uhci_show_td(td, out, len - (out - buf), 4);
}
if (list_empty(&td->fl_list)) {
/* TD 0 is the int1 TD and links to control_ls_qh */
if (!i) {
if (td->link !=
(cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH)) {
show_td_name();
out += sprintf(out, " skeleton TD not linked to ls_control QH!\n");
}
} else if (i < 9) {
if (td->link != cpu_to_le32(uhci->skeltd[i - 1]->dma_handle)) {
show_td_name();
out += sprintf(out, " skeleton TD not linked to next skeleton TD!\n");
}
} else {
show_td_name();
if (td->link != cpu_to_le32(td->dma_handle))
out += sprintf(out, " skel_term_td does not link to self\n");
/* Don't show it twice */
if (debug <= 1)
out += uhci_show_td(td, out, len - (out - buf), 4);
}
continue;
}
show_td_name();
head = &td->fl_list;
tmp = head->next;
while (tmp != head) {
td = list_entry(tmp, struct uhci_td, fl_list);
tmp = tmp->next;
out += uhci_show_td(td, out, len - (out - buf), 4);
}
if (!i) {
if (td->link !=
(cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH))
out += sprintf(out, " last TD not linked to ls_control QH!\n");
} else if (i < 9) {
if (td->link != cpu_to_le32(uhci->skeltd[i - 1]->dma_handle))
out += sprintf(out, " last TD not linked to next skeleton!\n");
}
}
out += sprintf(out, "Skeleton QH's\n"); out += sprintf(out, "Skeleton QH's\n");
for (i = 0; i < UHCI_NUM_SKELQH; ++i) { for (i = 0; i < UHCI_NUM_SKELQH; ++i) {
...@@ -419,21 +461,19 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) ...@@ -419,21 +461,19 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
out += uhci_show_qh(qh, out, len - (out - buf), 4); out += uhci_show_qh(qh, out, len - (out - buf), 4);
} }
/* QH 3 is the Terminating QH, it's different */ /* Last QH is the Terminating QH, it's different */
if (i == 3) { if (i == UHCI_NUM_SKELQH - 1) {
if (qh->link != UHCI_PTR_TERM) { if (qh->link != UHCI_PTR_TERM)
show_qh_name();
out += sprintf(out, " bandwidth reclamation on!\n"); out += sprintf(out, " bandwidth reclamation on!\n");
}
if (qh->element != cpu_to_le32(uhci->skel_term_td->dma_handle)) { if (qh->element != cpu_to_le32(uhci->term_td->dma_handle))
show_qh_name(); out += sprintf(out, " skel_term_qh element is not set to term_td!\n");
out += sprintf(out, " skel_term_qh element is not set to skel_term_td\n");
} continue;
} }
if (list_empty(&qh->list)) { if (list_empty(&qh->list)) {
if (i < 3) { if (i < UHCI_NUM_SKELQH - 1) {
if (qh->link != if (qh->link !=
(cpu_to_le32(uhci->skelqh[i + 1]->dma_handle) | UHCI_PTR_QH)) { (cpu_to_le32(uhci->skelqh[i + 1]->dma_handle) | UHCI_PTR_QH)) {
show_qh_name(); show_qh_name();
...@@ -457,18 +497,23 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) ...@@ -457,18 +497,23 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
out += uhci_show_qh(qh, out, len - (out - buf), 4); out += uhci_show_qh(qh, out, len - (out - buf), 4);
} }
if (i < 3) { if (i < UHCI_NUM_SKELQH - 1) {
if (qh->link != if (qh->link !=
(cpu_to_le32(uhci->skelqh[i + 1]->dma_handle) | UHCI_PTR_QH)) (cpu_to_le32(uhci->skelqh[i + 1]->dma_handle) | UHCI_PTR_QH))
out += sprintf(out, " last QH not linked to next skeleton!\n"); out += sprintf(out, " last QH not linked to next skeleton!\n");
} }
} }
spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
if (debug > 2)
out += uhci_show_lists(uhci, out, len - (out - buf));
return out - buf; return out - buf;
} }
#ifdef CONFIG_PROC_FS #ifdef CONFIG_PROC_FS
#define MAX_OUTPUT (PAGE_SIZE * 8) #define MAX_OUTPUT (PAGE_SIZE * 16)
static struct proc_dir_entry *uhci_proc_root = NULL; static struct proc_dir_entry *uhci_proc_root = NULL;
...@@ -483,7 +528,6 @@ static int uhci_proc_open(struct inode *inode, struct file *file) ...@@ -483,7 +528,6 @@ static int uhci_proc_open(struct inode *inode, struct file *file)
const struct proc_dir_entry *dp = PDE(inode); const struct proc_dir_entry *dp = PDE(inode);
struct uhci_hcd *uhci = dp->data; struct uhci_hcd *uhci = dp->data;
struct uhci_proc *up; struct uhci_proc *up;
unsigned long flags;
int ret = -ENOMEM; int ret = -ENOMEM;
lock_kernel(); lock_kernel();
...@@ -497,9 +541,7 @@ static int uhci_proc_open(struct inode *inode, struct file *file) ...@@ -497,9 +541,7 @@ static int uhci_proc_open(struct inode *inode, struct file *file)
goto out; goto out;
} }
spin_lock_irqsave(&uhci->frame_list_lock, flags);
up->size = uhci_sprint_schedule(uhci, up->data, MAX_OUTPUT); up->size = uhci_sprint_schedule(uhci, up->data, MAX_OUTPUT);
spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
file->private_data = up; file->private_data = up;
......
...@@ -69,7 +69,7 @@ ...@@ -69,7 +69,7 @@
* debug = 0, no debugging messages * debug = 0, no debugging messages
* debug = 1, dump failed URB's except for stalls * debug = 1, dump failed URB's except for stalls
* debug = 2, dump all failed URB's (including stalls) * debug = 2, dump all failed URB's (including stalls)
* show all queues in /proc/uhci/hc* * show all queues in /proc/driver/uhci/[pci_addr]
* debug = 3, show all TD's in URB's when dumping * debug = 3, show all TD's in URB's when dumping
*/ */
#ifdef DEBUG #ifdef DEBUG
...@@ -118,7 +118,7 @@ static inline void uhci_set_next_interrupt(struct uhci_hcd *uhci) ...@@ -118,7 +118,7 @@ static inline void uhci_set_next_interrupt(struct uhci_hcd *uhci)
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&uhci->frame_list_lock, flags); spin_lock_irqsave(&uhci->frame_list_lock, flags);
uhci->skel_term_td->status |= cpu_to_le32(TD_CTRL_IOC); uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC);
spin_unlock_irqrestore(&uhci->frame_list_lock, flags); spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
} }
...@@ -127,7 +127,7 @@ static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci) ...@@ -127,7 +127,7 @@ static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci)
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&uhci->frame_list_lock, flags); spin_lock_irqsave(&uhci->frame_list_lock, flags);
uhci->skel_term_td->status &= ~cpu_to_le32(TD_CTRL_IOC); uhci->term_td->status &= ~cpu_to_le32(TD_CTRL_IOC);
spin_unlock_irqrestore(&uhci->frame_list_lock, flags); spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
} }
...@@ -174,30 +174,8 @@ static void inline uhci_fill_td(struct uhci_td *td, __u32 status, ...@@ -174,30 +174,8 @@ static void inline uhci_fill_td(struct uhci_td *td, __u32 status,
td->buffer = cpu_to_le32(buffer); td->buffer = cpu_to_le32(buffer);
} }
static void uhci_insert_td(struct uhci_hcd *uhci, struct uhci_td *skeltd, struct uhci_td *td)
{
unsigned long flags;
struct uhci_td *ltd;
spin_lock_irqsave(&uhci->frame_list_lock, flags);
ltd = list_entry(skeltd->fl_list.prev, struct uhci_td, fl_list);
td->link = ltd->link;
mb();
ltd->link = cpu_to_le32(td->dma_handle);
list_add_tail(&td->fl_list, &skeltd->fl_list);
spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
}
/* /*
* We insert Isochronous transfers directly into the frame list at the * We insert Isochronous URB's directly into the frame list at the beginning
* beginning
* The layout looks as follows:
* frame list pointer -> iso td's (if any) ->
* periodic interrupt td (if frame 0) -> irq td's -> control qh -> bulk qh
*/ */
static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, unsigned framenum) static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, unsigned framenum)
{ {
...@@ -374,8 +352,9 @@ static void _uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struc ...@@ -374,8 +352,9 @@ static void _uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struc
/* Grab the last QH */ /* Grab the last QH */
lqh = list_entry(skelqh->list.prev, struct uhci_qh, list); lqh = list_entry(skelqh->list.prev, struct uhci_qh, list);
/* Patch this endpoint's URBs' QHs to point to the next skelQH: /*
* SkelQH --> ... lqh --> NewQH --> NextSkelQH * Patch this endpoint's URB's QHs to point to the next skelqh:
* skelqh --> ... lqh --> newqh --> next skelqh
* Do this first, so the HC always sees the right QH after this one. * Do this first, so the HC always sees the right QH after this one.
*/ */
list_for_each (tmp, &urbp->queue_list) { list_for_each (tmp, &urbp->queue_list) {
...@@ -387,15 +366,16 @@ static void _uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struc ...@@ -387,15 +366,16 @@ static void _uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struc
urbp->qh->link = lqh->link; urbp->qh->link = lqh->link;
wmb(); /* Ordering is important */ wmb(); /* Ordering is important */
/* Patch QHs for previous endpoint's queued URBs? HC goes /*
* here next, not to the NextSkelQH it now points to. * Patch QHs for previous endpoint's queued URBs? HC goes
* here next, not to the next skelqh it now points to.
* *
* lqh --> td ... --> qh ... --> td --> qh ... --> td * lqh --> td ... --> qh ... --> td --> qh ... --> td
* | | | * | | |
* v v v * v v v
* +<----------------+-----------------+ * +<----------------+-----------------+
* v * v
* NewQH --> td ... --> td * newqh --> td ... --> td
* | * |
* v * v
* ... * ...
...@@ -424,7 +404,8 @@ static void uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struct ...@@ -424,7 +404,8 @@ static void uhci_insert_qh(struct uhci_hcd *uhci, struct uhci_qh *skelqh, struct
spin_unlock_irqrestore(&uhci->frame_list_lock, flags); spin_unlock_irqrestore(&uhci->frame_list_lock, flags);
} }
/* start removal of qh from schedule; it finishes next frame. /*
* Start removal of QH from schedule; it finishes next frame.
* TDs should be unlinked before this is called. * TDs should be unlinked before this is called.
*/ */
static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
...@@ -437,7 +418,12 @@ static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) ...@@ -437,7 +418,12 @@ static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
qh->urbp = NULL; qh->urbp = NULL;
/* Only go through the hoops if it's actually linked in */ /*
* Only go through the hoops if it's actually linked in
* Queued QHs are removed in uhci_delete_queued_urb,
* since (for queued URBs) the pqh is pointed to the next
* QH in the queue, not the next endpoint's QH.
*/
spin_lock_irqsave(&uhci->frame_list_lock, flags); spin_lock_irqsave(&uhci->frame_list_lock, flags);
if (!list_empty(&qh->list)) { if (!list_empty(&qh->list)) {
pqh = list_entry(qh->list.prev, struct uhci_qh, list); pqh = list_entry(qh->list.prev, struct uhci_qh, list);
...@@ -459,7 +445,9 @@ static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) ...@@ -459,7 +445,9 @@ static void uhci_remove_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
pqh->link = qh->link; pqh->link = qh->link;
mb(); mb();
qh->element = qh->link = UHCI_PTR_TERM; /* Leave qh->link in case the HC is on the QH now, it will */
/* continue the rest of the schedule */
qh->element = UHCI_PTR_TERM;
list_del_init(&qh->list); list_del_init(&qh->list);
} }
...@@ -502,8 +490,7 @@ static int uhci_fixup_toggle(struct urb *urb, unsigned int toggle) ...@@ -502,8 +490,7 @@ static int uhci_fixup_toggle(struct urb *urb, unsigned int toggle)
} }
/* This function will append one URB's QH to another URB's QH. This is for */ /* This function will append one URB's QH to another URB's QH. This is for */
/* queuing bulk transfers and soon implicitily for */ /* queuing interrupt, control or bulk transfers */
/* control transfers */
static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, struct urb *urb) static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, struct urb *urb)
{ {
struct urb_priv *eurbp, *urbp, *furbp, *lurbp; struct urb_priv *eurbp, *urbp, *furbp, *lurbp;
...@@ -545,7 +532,7 @@ static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, stru ...@@ -545,7 +532,7 @@ static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, stru
urbp->qh->link = eurbp->qh->link; urbp->qh->link = eurbp->qh->link;
mb(); /* Make sure we flush everything */ mb(); /* Make sure we flush everything */
/* Only support bulk right now, so no depth */
lltd->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH; lltd->link = cpu_to_le32(urbp->qh->dma_handle) | UHCI_PTR_QH;
list_add_tail(&urbp->queue_list, &furbp->queue_list); list_add_tail(&urbp->queue_list, &furbp->queue_list);
...@@ -575,7 +562,7 @@ static void uhci_delete_queued_urb(struct uhci_hcd *uhci, struct urb *urb) ...@@ -575,7 +562,7 @@ static void uhci_delete_queued_urb(struct uhci_hcd *uhci, struct urb *urb)
/* Fix up the toggle for the next URB's */ /* Fix up the toggle for the next URB's */
if (!urbp->queued) if (!urbp->queued)
/* We set the toggle when we unlink */ /* We just set the toggle in uhci_unlink_generic */
toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
else { else {
/* If we're in the middle of the queue, grab the toggle */ /* If we're in the middle of the queue, grab the toggle */
...@@ -607,9 +594,35 @@ static void uhci_delete_queued_urb(struct uhci_hcd *uhci, struct urb *urb) ...@@ -607,9 +594,35 @@ static void uhci_delete_queued_urb(struct uhci_hcd *uhci, struct urb *urb)
usb_pipeout(urb->pipe), toggle); usb_pipeout(urb->pipe), toggle);
if (!urbp->queued) { if (!urbp->queued) {
struct uhci_qh *pqh;
nurbp->queued = 0; nurbp->queued = 0;
_uhci_insert_qh(uhci, uhci->skel_bulk_qh, nurbp->urb); /*
* Fixup the previous QH's queue to link to the new head
* of this queue.
*/
pqh = list_entry(urbp->qh->list.prev, struct uhci_qh, list);
if (pqh->urbp) {
struct list_head *head, *tmp;
head = &pqh->urbp->queue_list;
tmp = head->next;
while (head != tmp) {
struct urb_priv *turbp =
list_entry(tmp, struct urb_priv, queue_list);
tmp = tmp->next;
turbp->qh->link = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH;
}
}
pqh->link = cpu_to_le32(nurbp->qh->dma_handle) | UHCI_PTR_QH;
list_add_tail(&nurbp->qh->list, &urbp->qh->list);
list_del_init(&urbp->qh->list);
} else { } else {
/* We're somewhere in the middle (or end). A bit trickier */ /* We're somewhere in the middle (or end). A bit trickier */
/* than the head scenario */ /* than the head scenario */
...@@ -786,11 +799,11 @@ static int uhci_map_status(int status, int dir_out) ...@@ -786,11 +799,11 @@ static int uhci_map_status(int status, int dir_out)
/* /*
* Control transfers * Control transfers
*/ */
static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb) static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
{ {
struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
struct uhci_td *td; struct uhci_td *td;
struct uhci_qh *qh; struct uhci_qh *qh, *skelqh;
unsigned long destination, status; unsigned long destination, status;
int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
int len = urb->transfer_buffer_length; int len = urb->transfer_buffer_length;
...@@ -880,19 +893,32 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb) ...@@ -880,19 +893,32 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb)
urbp->qh = qh; urbp->qh = qh;
qh->urbp = urbp; qh->urbp = urbp;
uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
/* Low speed transfers get a different queue, and won't hog the bus */ /* Low speed transfers get a different queue, and won't hog the bus */
if (urb->dev->speed == USB_SPEED_LOW) { if (urb->dev->speed == USB_SPEED_LOW)
uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_DEPTH); skelqh = uhci->skel_ls_control_qh;
uhci_insert_qh(uhci, uhci->skel_ls_control_qh, urb); else {
} else { skelqh = uhci->skel_hs_control_qh;
uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
uhci_insert_qh(uhci, uhci->skel_hs_control_qh, urb);
uhci_inc_fsbr(uhci, urb); uhci_inc_fsbr(uhci, urb);
} }
if (eurb)
uhci_append_queued_urb(uhci, eurb, urb);
else
uhci_insert_qh(uhci, skelqh, urb);
return -EINPROGRESS; return -EINPROGRESS;
} }
/*
* If control was short, then end status packet wasn't sent, so this
* reorganize s so it's sent to finish the transfer. The original QH is
* removed from the skel and discarded; all TDs except the last (status)
* are deleted; the last (status) TD is put on a new QH which is reinserted
* into the skel. Since the last TD and urb_priv are reused, the TD->link
* and urb_priv maintain any queued QHs.
*/
static int usb_control_retrigger_status(struct uhci_hcd *uhci, struct urb *urb) static int usb_control_retrigger_status(struct uhci_hcd *uhci, struct urb *urb)
{ {
struct list_head *tmp, *head; struct list_head *tmp, *head;
...@@ -1047,46 +1073,109 @@ static int uhci_result_control(struct uhci_hcd *uhci, struct urb *urb) ...@@ -1047,46 +1073,109 @@ static int uhci_result_control(struct uhci_hcd *uhci, struct urb *urb)
} }
/* /*
* Interrupt transfers * Common submit for bulk and interrupt
*/ */
static int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb) static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb, struct uhci_qh *skelqh)
{ {
struct uhci_td *td; struct uhci_td *td;
struct uhci_qh *qh;
unsigned long destination, status; unsigned long destination, status;
int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
int len = urb->transfer_buffer_length;
struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
dma_addr_t data = urb->transfer_dma;
if (urb->transfer_buffer_length > usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) if (len < 0)
return -EINVAL; return -EINVAL;
/* The "pipe" thing contains the destination in bits 8--18 */ /* The "pipe" thing contains the destination in bits 8--18 */
destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
status = TD_CTRL_ACTIVE | TD_CTRL_IOC; status = uhci_maxerr(3) | TD_CTRL_ACTIVE;
if (urb->dev->speed == USB_SPEED_LOW) if (urb->dev->speed == USB_SPEED_LOW)
status |= TD_CTRL_LS; status |= TD_CTRL_LS;
if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
status |= TD_CTRL_SPD;
td = uhci_alloc_td(uhci, urb->dev); /*
if (!td) * Build the DATA TD's
return -ENOMEM; */
do { /* Allow zero length packets */
int pktsze = len;
destination |= (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT); if (pktsze > maxsze)
destination |= uhci_explen(urb->transfer_buffer_length - 1); pktsze = maxsze;
usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); td = uhci_alloc_td(uhci, urb->dev);
if (!td)
return -ENOMEM;
uhci_add_td_to_urb(urb, td); uhci_add_td_to_urb(urb, td);
uhci_fill_td(td, status, destination, urb->transfer_dma); uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1) |
(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
data);
data += pktsze;
len -= maxsze;
usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe));
} while (len > 0);
/*
* USB_ZERO_PACKET means adding a 0-length packet, if direction
* is OUT and the transfer_length was an exact multiple of maxsze,
* hence (len = transfer_length - N * maxsze) == 0
* however, if transfer_length == 0, the zero packet was already
* prepared above.
*/
if (usb_pipeout(urb->pipe) && (urb->transfer_flags & USB_ZERO_PACKET) &&
!len && urb->transfer_buffer_length) {
td = uhci_alloc_td(uhci, urb->dev);
if (!td)
return -ENOMEM;
uhci_add_td_to_urb(urb, td);
uhci_fill_td(td, status, destination | uhci_explen(UHCI_NULL_DATA_SIZE) |
(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
data);
usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe));
}
/* Set the flag on the last packet */
td->status |= cpu_to_le32(TD_CTRL_IOC);
uhci_insert_td(uhci, uhci->skeltd[__interval_to_skel(urb->interval)], td); qh = uhci_alloc_qh(uhci, urb->dev);
if (!qh)
return -ENOMEM;
urbp->qh = qh;
qh->urbp = urbp;
/* Always breadth first */
uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
if (eurb)
uhci_append_queued_urb(uhci, eurb, urb);
else
uhci_insert_qh(uhci, skelqh, urb);
return -EINPROGRESS; return -EINPROGRESS;
} }
static int uhci_result_interrupt(struct uhci_hcd *uhci, struct urb *urb) /*
* Common result for bulk and interrupt
*/
static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb)
{ {
struct list_head *tmp, *head; struct list_head *tmp, *head;
struct urb_priv *urbp = urb->hcpriv; struct urb_priv *urbp = urb->hcpriv;
struct uhci_td *td; struct uhci_td *td;
unsigned int status; unsigned int status = 0;
int ret = 0; int ret = 0;
urb->actual_length = 0; urb->actual_length = 0;
...@@ -1128,15 +1217,11 @@ static int uhci_result_interrupt(struct uhci_hcd *uhci, struct urb *urb) ...@@ -1128,15 +1217,11 @@ static int uhci_result_interrupt(struct uhci_hcd *uhci, struct urb *urb)
err: err:
if ((debug == 1 && ret != -EPIPE) || debug > 1) { if ((debug == 1 && ret != -EPIPE) || debug > 1) {
/* Some debugging code */ /* Some debugging code */
dbg("uhci_result_interrupt/bulk() failed with status %x", dbg("uhci_result_common() failed with status %x", status);
status);
if (errbuf) { if (errbuf) {
/* Print the chain for debugging purposes */ /* Print the chain for debugging purposes */
if (urbp->qh) uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0);
uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0);
else
uhci_show_td(td, errbuf, ERRBUF_LEN, 0);
lprintk(errbuf); lprintk(errbuf);
} }
...@@ -1145,129 +1230,35 @@ static int uhci_result_interrupt(struct uhci_hcd *uhci, struct urb *urb) ...@@ -1145,129 +1230,35 @@ static int uhci_result_interrupt(struct uhci_hcd *uhci, struct urb *urb)
return ret; return ret;
} }
static void uhci_reset_interrupt(struct uhci_hcd *uhci, struct urb *urb) static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
{ {
struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; int ret;
struct uhci_td *td;
unsigned long flags;
spin_lock_irqsave(&urb->lock, flags);
td = list_entry(urbp->td_list.next, struct uhci_td, list);
td->status = (td->status & cpu_to_le32(0x2F000000)) | cpu_to_le32(TD_CTRL_ACTIVE | TD_CTRL_IOC);
td->token &= ~cpu_to_le32(TD_TOKEN_TOGGLE);
td->token |= cpu_to_le32(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT);
usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
urb->status = -EINPROGRESS;
spin_unlock_irqrestore(&urb->lock, flags);
}
/*
* Bulk transfers
*/
static int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
{
struct uhci_td *td;
struct uhci_qh *qh;
unsigned long destination, status;
int maxsze = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
int len = urb->transfer_buffer_length;
struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
dma_addr_t data = urb->transfer_dma;
if (len < 0)
return -EINVAL;
/* Can't have low speed bulk transfers */ /* Can't have low speed bulk transfers */
if (urb->dev->speed == USB_SPEED_LOW) if (urb->dev->speed == USB_SPEED_LOW)
return -EINVAL; return -EINVAL;
/* The "pipe" thing contains the destination in bits 8--18 */ ret = uhci_submit_common(uhci, urb, eurb, uhci->skel_bulk_qh);
destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe); if (ret == -EINPROGRESS)
uhci_inc_fsbr(uhci, urb);
/* 3 errors */
status = TD_CTRL_ACTIVE | uhci_maxerr(3);
if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
status |= TD_CTRL_SPD;
/*
* Build the DATA TD's
*/
do { /* Allow zero length packets */
int pktsze = len;
if (pktsze > maxsze)
pktsze = maxsze;
td = uhci_alloc_td(uhci, urb->dev);
if (!td)
return -ENOMEM;
uhci_add_td_to_urb(urb, td);
uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1) |
(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
data);
data += pktsze;
len -= maxsze;
usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe));
} while (len > 0);
/*
* USB_ZERO_PACKET means adding a 0-length packet, if
* direction is OUT and the transfer_length was an
* exact multiple of maxsze, hence
* (len = transfer_length - N * maxsze) == 0
* however, if transfer_length == 0, the zero packet
* was already prepared above.
*/
if (usb_pipeout(urb->pipe) && (urb->transfer_flags & USB_ZERO_PACKET) &&
!len && urb->transfer_buffer_length) {
td = uhci_alloc_td(uhci, urb->dev);
if (!td)
return -ENOMEM;
uhci_add_td_to_urb(urb, td);
uhci_fill_td(td, status, destination | uhci_explen(UHCI_NULL_DATA_SIZE) |
(usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT),
data);
usb_dotoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe));
}
/* Set the flag on the last packet */
td->status |= cpu_to_le32(TD_CTRL_IOC);
qh = uhci_alloc_qh(uhci, urb->dev);
if (!qh)
return -ENOMEM;
urbp->qh = qh;
qh->urbp = urbp;
/* Always breadth first */
uhci_insert_tds_in_qh(qh, urb, UHCI_PTR_BREADTH);
if (eurb) return ret;
uhci_append_queued_urb(uhci, eurb, urb); }
else
uhci_insert_qh(uhci, uhci->skel_bulk_qh, urb);
uhci_inc_fsbr(uhci, urb); static inline int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb, struct urb *eurb)
{
/* Interrupt-IN can't be more than 1 packet */
if (usb_pipein(urb->pipe) && urb->transfer_buffer_length > usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))
return -EINVAL;
return -EINPROGRESS; return uhci_submit_common(uhci, urb, eurb, uhci->skelqh[__interval_to_skel(urb->interval)]);
} }
/* We can use the result interrupt since they're identical */ /*
#define uhci_result_bulk uhci_result_interrupt * Bulk and interrupt use common result
*/
#define uhci_result_bulk uhci_result_common
#define uhci_result_interrupt uhci_result_common
/* /*
* Isochronous transfers * Isochronous transfers
...@@ -1457,51 +1448,52 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, int mem_flags) ...@@ -1457,51 +1448,52 @@ static int uhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, int mem_flags)
switch (usb_pipetype(urb->pipe)) { switch (usb_pipetype(urb->pipe)) {
case PIPE_CONTROL: case PIPE_CONTROL:
if (eurb) ret = uhci_submit_control(uhci, urb, eurb);
ret = -ENXIO; /* no control queueing yet */
else
ret = uhci_submit_control(uhci, urb);
break; break;
case PIPE_INTERRUPT: case PIPE_INTERRUPT:
if (eurb) if (!eurb) {
ret = -ENXIO; /* no interrupt queueing yet */
else if (urb->bandwidth == 0) { /* not yet checked/allocated */
bustime = usb_check_bandwidth(urb->dev, urb); bustime = usb_check_bandwidth(urb->dev, urb);
if (bustime < 0) if (bustime < 0)
ret = bustime; ret = bustime;
else { else {
ret = uhci_submit_interrupt(uhci, urb); ret = uhci_submit_interrupt(uhci, urb, eurb);
if (ret == -EINPROGRESS) if (ret == -EINPROGRESS)
usb_claim_bandwidth(urb->dev, urb, bustime, 0); usb_claim_bandwidth(urb->dev, urb, bustime, 0);
} }
} else /* bandwidth is already set */ } else { /* inherit from parent */
ret = uhci_submit_interrupt(uhci, urb); urb->bandwidth = eurb->bandwidth;
ret = uhci_submit_interrupt(uhci, urb, eurb);
}
break; break;
case PIPE_BULK: case PIPE_BULK:
ret = uhci_submit_bulk(uhci, urb, eurb); ret = uhci_submit_bulk(uhci, urb, eurb);
break; break;
case PIPE_ISOCHRONOUS: case PIPE_ISOCHRONOUS:
if (urb->bandwidth == 0) { /* not yet checked/allocated */ bustime = usb_check_bandwidth(urb->dev, urb);
bustime = usb_check_bandwidth(urb->dev, urb); if (bustime < 0) {
if (bustime < 0) { ret = bustime;
ret = bustime; break;
break; }
}
ret = uhci_submit_isochronous(uhci, urb); ret = uhci_submit_isochronous(uhci, urb);
if (ret == -EINPROGRESS) if (ret == -EINPROGRESS)
usb_claim_bandwidth(urb->dev, urb, bustime, 1); usb_claim_bandwidth(urb->dev, urb, bustime, 1);
} else /* bandwidth is already set */
ret = uhci_submit_isochronous(uhci, urb);
break; break;
} }
spin_unlock_irqrestore(&uhci->urb_list_lock, flags);
if (ret != -EINPROGRESS) { if (ret != -EINPROGRESS) {
/* Submit failed, so delete it from the urb_list */
struct urb_priv *urbp = urb->hcpriv;
list_del_init(&urbp->urb_list);
spin_unlock_irqrestore(&uhci->urb_list_lock, flags);
uhci_destroy_urb_priv (uhci, urb); uhci_destroy_urb_priv (uhci, urb);
return ret; return ret;
} }
spin_unlock_irqrestore(&uhci->urb_list_lock, flags);
return 0; return 0;
} }
...@@ -1556,14 +1548,17 @@ static void uhci_transfer_result(struct uhci_hcd *uhci, struct urb *urb) ...@@ -1556,14 +1548,17 @@ static void uhci_transfer_result(struct uhci_hcd *uhci, struct urb *urb)
uhci_unlink_generic(uhci, urb); uhci_unlink_generic(uhci, urb);
break; break;
case PIPE_INTERRUPT: case PIPE_INTERRUPT:
/* Interrupts are an exception */
if (urb->interval)
goto out_complete;
/* Release bandwidth for Interrupt or Isoc. transfers */ /* Release bandwidth for Interrupt or Isoc. transfers */
/* Make sure we don't release if we have a queued URB */
spin_lock(&uhci->frame_list_lock);
/* Spinlock needed ? */ /* Spinlock needed ? */
if (urb->bandwidth) if (list_empty(&urbp->queue_list) && urb->bandwidth)
usb_release_bandwidth(urb->dev, urb, 0); usb_release_bandwidth(urb->dev, urb, 0);
else
/* bandwidth was passed on to queued URB, */
/* so don't let usb_unlink_urb() release it */
urb->bandwidth = 0;
spin_unlock(&uhci->frame_list_lock);
uhci_unlink_generic(uhci, urb); uhci_unlink_generic(uhci, urb);
break; break;
default: default:
...@@ -1574,7 +1569,6 @@ static void uhci_transfer_result(struct uhci_hcd *uhci, struct urb *urb) ...@@ -1574,7 +1569,6 @@ static void uhci_transfer_result(struct uhci_hcd *uhci, struct urb *urb)
/* Remove it from uhci->urb_list */ /* Remove it from uhci->urb_list */
list_del_init(&urbp->urb_list); list_del_init(&urbp->urb_list);
out_complete:
uhci_add_complete(uhci, urb); uhci_add_complete(uhci, urb);
out: out:
...@@ -1643,6 +1637,13 @@ static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) ...@@ -1643,6 +1637,13 @@ static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
unsigned long flags; unsigned long flags;
struct urb_priv *urbp = urb->hcpriv; struct urb_priv *urbp = urb->hcpriv;
/* If this is an interrupt URB that is being killed in urb->complete, */
/* then just set its status and return */
if (!urbp) {
urb->status = -ECONNRESET;
return 0;
}
spin_lock_irqsave(&uhci->urb_list_lock, flags); spin_lock_irqsave(&uhci->urb_list_lock, flags);
list_del_init(&urbp->urb_list); list_del_init(&urbp->urb_list);
...@@ -1805,38 +1806,42 @@ static void uhci_finish_urb(struct usb_hcd *hcd, struct urb *urb) ...@@ -1805,38 +1806,42 @@ static void uhci_finish_urb(struct usb_hcd *hcd, struct urb *urb)
struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
struct usb_device *dev = urb->dev; struct usb_device *dev = urb->dev;
struct uhci_hcd *uhci = hcd_to_uhci(hcd); struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int killed, resubmit_interrupt, status; int killed, resubmit_interrupt, status, ret;
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&urb->lock, flags); spin_lock_irqsave(&urb->lock, flags);
killed = (urb->status == -ENOENT || urb->status == -ECONNRESET); killed = (urb->status == -ENOENT || urb->status == -ECONNRESET);
resubmit_interrupt = (usb_pipetype(urb->pipe) == PIPE_INTERRUPT && resubmit_interrupt = (usb_pipetype(urb->pipe) == PIPE_INTERRUPT &&
urb->interval); urb->interval && !killed);
status = urbp->status; status = urbp->status;
if (!resubmit_interrupt || killed) uhci_destroy_urb_priv(uhci, urb);
/* We don't need urb_priv anymore */
uhci_destroy_urb_priv(uhci, urb);
if (!killed) if (!killed)
urb->status = status; urb->status = status;
spin_unlock_irqrestore(&urb->lock, flags); spin_unlock_irqrestore(&urb->lock, flags);
if (resubmit_interrupt) if (resubmit_interrupt) {
urb->complete(urb); urb->complete(urb);
else
usb_hcd_giveback_urb(hcd, urb);
if (resubmit_interrupt)
/* Recheck the status. The completion handler may have */ /* Recheck the status. The completion handler may have */
/* unlinked the resubmitting interrupt URB */ /* unlinked the resubmitting interrupt URB */
killed = (urb->status == -ENOENT || urb->status == -ECONNRESET); /* Note that this doesn't do what usb_hcd_giveback_urb() */
/* normally does, so that doesn't ever get done. */
if (urb->status == -ECONNRESET) {
usb_put_urb(urb);
return;
}
if (resubmit_interrupt && !killed) {
urb->dev = dev; urb->dev = dev;
uhci_reset_interrupt(uhci, urb); urb->status = -EINPROGRESS;
} urb->actual_length = 0;
urb->bandwidth = 0;
if ((ret = uhci_urb_enqueue(&uhci->hcd, urb, 0)))
printk(KERN_ERR __FILE__ ": could not resubmit interrupt URB : %d\n", ret);
} else
usb_hcd_giveback_urb(hcd, urb);
} }
static void uhci_finish_completion(struct usb_hcd *hcd) static void uhci_finish_completion(struct usb_hcd *hcd)
...@@ -2041,11 +2046,10 @@ static void release_uhci(struct uhci_hcd *uhci) ...@@ -2041,11 +2046,10 @@ static void release_uhci(struct uhci_hcd *uhci)
uhci->skelqh[i] = NULL; uhci->skelqh[i] = NULL;
} }
for (i = 0; i < UHCI_NUM_SKELTD; i++) if (uhci->term_td) {
if (uhci->skeltd[i]) { uhci_free_td(uhci, uhci->term_td);
uhci_free_td(uhci, uhci->skeltd[i]); uhci->term_td = NULL;
uhci->skeltd[i] = NULL; }
}
if (uhci->qh_pool) { if (uhci->qh_pool) {
pci_pool_destroy(uhci->qh_pool); pci_pool_destroy(uhci->qh_pool);
...@@ -2193,34 +2197,10 @@ static int __devinit uhci_start(struct usb_hcd *hcd) ...@@ -2193,34 +2197,10 @@ static int __devinit uhci_start(struct usb_hcd *hcd)
goto err_alloc_root_hub; goto err_alloc_root_hub;
} }
uhci->skeltd[0] = uhci_alloc_td(uhci, udev); uhci->term_td = uhci_alloc_td(uhci, udev);
if (!uhci->skeltd[0]) { if (!uhci->term_td) {
err("unable to allocate TD 0"); err("unable to allocate terminating TD");
goto err_alloc_skeltd; goto err_alloc_term_td;
}
/*
* 9 Interrupt queues; link int2 to int1, int4 to int2, etc
* then link int1 to control and control to bulk
*/
for (i = 1; i < 9; i++) {
struct uhci_td *td;
td = uhci->skeltd[i] = uhci_alloc_td(uhci, udev);
if (!td) {
err("unable to allocate TD %d", i);
goto err_alloc_skeltd;
}
uhci_fill_td(td, 0, uhci_explen(UHCI_NULL_DATA_SIZE) |
(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
td->link = cpu_to_le32(uhci->skeltd[i - 1]->dma_handle);
}
uhci->skel_term_td = uhci_alloc_td(uhci, udev);
if (!uhci->skel_term_td) {
err("unable to allocate skel TD term");
goto err_alloc_skeltd;
} }
for (i = 0; i < UHCI_NUM_SKELQH; i++) { for (i = 0; i < UHCI_NUM_SKELQH; i++) {
...@@ -2231,26 +2211,30 @@ static int __devinit uhci_start(struct usb_hcd *hcd) ...@@ -2231,26 +2211,30 @@ static int __devinit uhci_start(struct usb_hcd *hcd)
} }
} }
uhci_fill_td(uhci->skel_int1_td, 0, (UHCI_NULL_DATA_SIZE << 21) | /*
(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0); * 8 Interrupt queues; link int2 to int1, int4 to int2, etc
uhci->skel_int1_td->link = cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH; * then link int1 to control and control to bulk
*/
uhci->skel_int128_qh->link = cpu_to_le32(uhci->skel_int64_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_int64_qh->link = cpu_to_le32(uhci->skel_int32_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_int32_qh->link = cpu_to_le32(uhci->skel_int16_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_int16_qh->link = cpu_to_le32(uhci->skel_int8_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_int8_qh->link = cpu_to_le32(uhci->skel_int4_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_int4_qh->link = cpu_to_le32(uhci->skel_int2_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_int2_qh->link = cpu_to_le32(uhci->skel_int1_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_int1_qh->link = cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_ls_control_qh->link = cpu_to_le32(uhci->skel_hs_control_qh->dma_handle) | UHCI_PTR_QH; uhci->skel_ls_control_qh->link = cpu_to_le32(uhci->skel_hs_control_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_ls_control_qh->element = UHCI_PTR_TERM;
uhci->skel_hs_control_qh->link = cpu_to_le32(uhci->skel_bulk_qh->dma_handle) | UHCI_PTR_QH; uhci->skel_hs_control_qh->link = cpu_to_le32(uhci->skel_bulk_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_hs_control_qh->element = UHCI_PTR_TERM;
uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH; uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH;
uhci->skel_bulk_qh->element = UHCI_PTR_TERM;
/* This dummy TD is to work around a bug in Intel PIIX controllers */ /* This dummy TD is to work around a bug in Intel PIIX controllers */
uhci_fill_td(uhci->skel_term_td, 0, (UHCI_NULL_DATA_SIZE << 21) | uhci_fill_td(uhci->term_td, 0, (UHCI_NULL_DATA_SIZE << 21) |
(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0); (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
uhci->skel_term_td->link = cpu_to_le32(uhci->skel_term_td->dma_handle); uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
uhci->skel_term_qh->link = UHCI_PTR_TERM; uhci->skel_term_qh->link = UHCI_PTR_TERM;
uhci->skel_term_qh->element = cpu_to_le32(uhci->skel_term_td->dma_handle); uhci->skel_term_qh->element = cpu_to_le32(uhci->term_td->dma_handle);
/* /*
* Fill the frame list: make all entries point to * Fill the frame list: make all entries point to
...@@ -2285,7 +2269,7 @@ static int __devinit uhci_start(struct usb_hcd *hcd) ...@@ -2285,7 +2269,7 @@ static int __devinit uhci_start(struct usb_hcd *hcd)
} }
/* Only place we don't use the frame list routines */ /* Only place we don't use the frame list routines */
uhci->fl->frame[i] = cpu_to_le32(uhci->skeltd[irq]->dma_handle); uhci->fl->frame[i] = cpu_to_le32(uhci->skelqh[7 - irq]->dma_handle);
} }
start_hc(uhci); start_hc(uhci);
...@@ -2314,20 +2298,17 @@ static int __devinit uhci_start(struct usb_hcd *hcd) ...@@ -2314,20 +2298,17 @@ static int __devinit uhci_start(struct usb_hcd *hcd)
del_timer_sync(&uhci->stall_timer); del_timer_sync(&uhci->stall_timer);
err_alloc_skelqh:
for (i = 0; i < UHCI_NUM_SKELQH; i++) for (i = 0; i < UHCI_NUM_SKELQH; i++)
if (uhci->skelqh[i]) { if (uhci->skelqh[i]) {
uhci_free_qh(uhci, uhci->skelqh[i]); uhci_free_qh(uhci, uhci->skelqh[i]);
uhci->skelqh[i] = NULL; uhci->skelqh[i] = NULL;
} }
err_alloc_skelqh: uhci_free_td(uhci, uhci->term_td);
for (i = 0; i < UHCI_NUM_SKELTD; i++) uhci->term_td = NULL;
if (uhci->skeltd[i]) {
uhci_free_td(uhci, uhci->skeltd[i]);
uhci->skeltd[i] = NULL;
}
err_alloc_skeltd: err_alloc_term_td:
usb_free_dev(udev); usb_free_dev(udev);
hcd->self.root_hub = NULL; hcd->self.root_hub = NULL;
...@@ -2517,7 +2498,7 @@ static int __init uhci_hcd_init(void) ...@@ -2517,7 +2498,7 @@ static int __init uhci_hcd_init(void)
up_failed: up_failed:
#ifdef CONFIG_PROC_FS #ifdef CONFIG_PROC_FS
remove_proc_entry("uhci", 0); remove_proc_entry("driver/uhci", 0);
proc_failed: proc_failed:
#endif #endif
...@@ -2537,7 +2518,7 @@ static void __exit uhci_hcd_cleanup(void) ...@@ -2537,7 +2518,7 @@ static void __exit uhci_hcd_cleanup(void)
printk(KERN_INFO "uhci: not all urb_priv's were freed\n"); printk(KERN_INFO "uhci: not all urb_priv's were freed\n");
#ifdef CONFIG_PROC_FS #ifdef CONFIG_PROC_FS
remove_proc_entry("uhci", 0); remove_proc_entry("driver/uhci", 0);
#endif #endif
if (errbuf) if (errbuf)
......
...@@ -81,7 +81,8 @@ struct uhci_frame_list { ...@@ -81,7 +81,8 @@ struct uhci_frame_list {
struct urb_priv; struct urb_priv;
/* One role of a QH is to hold a queue of TDs for some endpoint. Each QH is /*
* One role of a QH is to hold a queue of TDs for some endpoint. Each QH is
* used with one URB, and qh->element (updated by the HC) is either: * used with one URB, and qh->element (updated by the HC) is either:
* - the next unprocessed TD for the URB, or * - the next unprocessed TD for the URB, or
* - UHCI_PTR_TERM (when there's no more traffic for this endpoint), or * - UHCI_PTR_TERM (when there's no more traffic for this endpoint), or
...@@ -194,85 +195,63 @@ struct uhci_td { ...@@ -194,85 +195,63 @@ struct uhci_td {
} __attribute__((aligned(16))); } __attribute__((aligned(16)));
/* /*
* There are various standard queues. We set up several different * The UHCI driver places Interrupt, Control and Bulk into QH's both
* queues for each of the three basic queue types: interrupt, * to group together TD's for one transfer, and also to faciliate queuing
* control, and bulk. * of URB's. To make it easy to insert entries into the schedule, we have
* * a skeleton of QH's for each predefined Interrupt latency, low speed
* - There are various different interrupt latencies: ranging from * control, high speed control and terminating QH (see explanation for
* every other USB frame (2 ms apart) to every 256 USB frames (ie * the terminating QH below).
* 256 ms apart). Make your choice according to how obnoxious you
* want to be on the wire, vs how critical latency is for you.
* - The control list is done every frame.
* - There are 4 bulk lists, so that up to four devices can have a
* bulk list of their own and when run concurrently all four lists
* will be be serviced.
*
* This is a bit misleading, there are various interrupt latencies, but they
* vary a bit, interrupt2 isn't exactly 2ms, it can vary up to 4ms since the
* other queues can "override" it. interrupt4 can vary up to 8ms, etc. Minor
* problem
*
* In the case of the root hub, these QH's are just head's of qh's. Don't
* be scared, it kinda makes sense. Look at this wonderful picture care of
* Linus:
* *
* generic- -> dev1- -> generic- -> dev1- -> control- -> bulk- -> ... * When we want to add a new QH, we add it to the end of the list for the
* iso-QH iso-QH irq-QH irq-QH QH QH * skeleton QH.
* | | | | | |
* End dev1-iso-TD1 End dev1-irq-TD1 ... ...
* |
* dev1-iso-TD2
* |
* ....
* *
* This may vary a bit (the UHCI docs don't explicitly say you can put iso * For instance, the queue can look like this:
* transfers in QH's and all of their pictures don't have that either) but
* other than that, that is what we're doing now
* *
* And now we don't put Iso transfers in QH's, so we don't waste one on it * skel int128 QH
* --jerdfelt * dev 1 interrupt QH
* dev 5 interrupt QH
* skel int64 QH
* skel int32 QH
* ...
* skel int1 QH
* skel low speed control QH
* dev 5 control QH
* skel high speed control QH
* skel bulk QH
* dev 1 bulk QH
* dev 2 bulk QH
* skel terminating QH
* *
* To keep with Linus' nomenclature, this is called the QH skeleton. These * The terminating QH is used for 2 reasons:
* labels (below) are only signficant to the root hub's QH's * - To place a terminating TD which is used to workaround a PIIX bug
* (see Intel errata for explanation)
* - To loop back to the high speed control queue for full speed bandwidth
* reclamation
* *
* * Isochronous transfers are stored before the start of the skeleton
* NOTE: That ASCII art doesn't match the current (August 2002) code, in * schedule and don't use QH's. While the UHCI spec doesn't forbid the
* more ways than just not using QHs for ISO. * use of QH's for Isochronous, it doesn't use them either. Since we don't
* * need to use them either, we follow the spec diagrams in hope that it'll
* NOTE: Another way to look at the UHCI schedules is to compare them to what * be more compatible with future UHCI implementations.
* other host controller interfaces use. EHCI, OHCI, and UHCI all have tables
* of transfers that the controller scans, frame by frame, and which hold the
* scheduled periodic transfers. The key differences are that UHCI
*
* (a) puts control and bulk transfers into that same table; the others
* have separate data structures for non-periodic transfers.
* (b) lets QHs be linked from TDs, not just other QHs, since they don't
* hold endpoint data. this driver chooses to use one QH per URB.
* (c) needs more TDs, since it uses one per packet. the data toggle
* is stored in those TDs, along with all other endpoint state.
*/ */
#define UHCI_NUM_SKELTD 10 #define UHCI_NUM_SKELQH 12
#define skel_int1_td skeltd[0] #define skel_int128_qh skelqh[0]
#define skel_int2_td skeltd[1] #define skel_int64_qh skelqh[1]
#define skel_int4_td skeltd[2] #define skel_int32_qh skelqh[2]
#define skel_int8_td skeltd[3] #define skel_int16_qh skelqh[3]
#define skel_int16_td skeltd[4] #define skel_int8_qh skelqh[4]
#define skel_int32_td skeltd[5] #define skel_int4_qh skelqh[5]
#define skel_int64_td skeltd[6] #define skel_int2_qh skelqh[6]
#define skel_int128_td skeltd[7] #define skel_int1_qh skelqh[7]
#define skel_int256_td skeltd[8] #define skel_ls_control_qh skelqh[8]
#define skel_term_td skeltd[9] /* To work around PIIX UHCI bug */ #define skel_hs_control_qh skelqh[9]
#define skel_bulk_qh skelqh[10]
#define UHCI_NUM_SKELQH 4 #define skel_term_qh skelqh[11]
#define skel_ls_control_qh skelqh[0]
#define skel_hs_control_qh skelqh[1]
#define skel_bulk_qh skelqh[2]
#define skel_term_qh skelqh[3]
/* /*
* Search tree for determining where <interval> fits in the * Search tree for determining where <interval> fits in the skelqh[]
* skelqh[] skeleton. * skeleton.
* *
* An interrupt request should be placed into the slowest skelqh[] * An interrupt request should be placed into the slowest skelqh[]
* which meets the interval/period/frequency requirement. * which meets the interval/period/frequency requirement.
...@@ -280,32 +259,27 @@ struct uhci_td { ...@@ -280,32 +259,27 @@ struct uhci_td {
* *
* For a given <interval>, this function returns the appropriate/matching * For a given <interval>, this function returns the appropriate/matching
* skelqh[] index value. * skelqh[] index value.
*
* NOTE: For UHCI, we don't really need int256_qh since the maximum interval
* is 255 ms. However, we do need an int1_qh since 1 is a valid interval
* and we should meet that frequency when requested to do so.
* This will require some change(s) to the UHCI skeleton.
*/ */
static inline int __interval_to_skel(int interval) static inline int __interval_to_skel(int interval)
{ {
if (interval < 16) { if (interval < 16) {
if (interval < 4) { if (interval < 4) {
if (interval < 2) if (interval < 2)
return 0; /* int1 for 0-1 ms */ return 7; /* int1 for 0-1 ms */
return 1; /* int2 for 2-3 ms */ return 6; /* int2 for 2-3 ms */
} }
if (interval < 8) if (interval < 8)
return 2; /* int4 for 4-7 ms */ return 5; /* int4 for 4-7 ms */
return 3; /* int8 for 8-15 ms */ return 4; /* int8 for 8-15 ms */
} }
if (interval < 64) { if (interval < 64) {
if (interval < 32) if (interval < 32)
return 4; /* int16 for 16-31 ms */ return 3; /* int16 for 16-31 ms */
return 5; /* int32 for 32-63 ms */ return 2; /* int32 for 32-63 ms */
} }
if (interval < 128) if (interval < 128)
return 6; /* int64 for 64-127 ms */ return 1; /* int64 for 64-127 ms */
return 7; /* int128 for 128-255 ms (Max.) */ return 0; /* int128 for 128-255 ms (Max.) */
} }
#define hcd_to_uhci(hcd_ptr) container_of(hcd_ptr, struct uhci_hcd, hcd) #define hcd_to_uhci(hcd_ptr) container_of(hcd_ptr, struct uhci_hcd, hcd)
...@@ -332,7 +306,7 @@ struct uhci_hcd { ...@@ -332,7 +306,7 @@ struct uhci_hcd {
struct usb_bus *bus; struct usb_bus *bus;
struct uhci_td *skeltd[UHCI_NUM_SKELTD]; /* Skeleton TD's */ struct uhci_td *term_td; /* Terminating TD, see UHCI bug */
struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */ struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */
spinlock_t frame_list_lock; spinlock_t frame_list_lock;
......
...@@ -63,7 +63,8 @@ CONFIG_USB_KBD ...@@ -63,7 +63,8 @@ CONFIG_USB_KBD
to use the generic HID driver for your USB keyboard and prefer to use the generic HID driver for your USB keyboard and prefer
to use the keyboard in its limited Boot Protocol mode instead. to use the keyboard in its limited Boot Protocol mode instead.
This is almost certainly not what you want. This is almost certainly not what you want. This is mostly
useful for embedded applications or simple keyboards.
This code is also available as a module ( = code which can be This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want). inserted in and removed from the running kernel whenever you want).
...@@ -77,7 +78,8 @@ CONFIG_USB_MOUSE ...@@ -77,7 +78,8 @@ CONFIG_USB_MOUSE
to use the generic HID driver for your USB keyboard and prefer to use the generic HID driver for your USB keyboard and prefer
to use the keyboard in its limited Boot Protocol mode instead. to use the keyboard in its limited Boot Protocol mode instead.
This is almost certainly not what you want. This is almost certainly not what you want. This is mostly
useful for embedded applications or simple mice.
This code is also available as a module ( = code which can be This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want). inserted in and removed from the running kernel whenever you want).
......
...@@ -15,8 +15,11 @@ dep_mbool ' Logitech WingMan *3D support' CONFIG_LOGITECH_FF $CONFIG_USB_ ...@@ -15,8 +15,11 @@ dep_mbool ' Logitech WingMan *3D support' CONFIG_LOGITECH_FF $CONFIG_USB_
dep_mbool ' /dev/hiddev raw HID device support' CONFIG_USB_HIDDEV $CONFIG_USB_HID dep_mbool ' /dev/hiddev raw HID device support' CONFIG_USB_HIDDEV $CONFIG_USB_HID
if [ "$CONFIG_USB_HID" != "y" ]; then if [ "$CONFIG_USB_HID" != "y" ]; then
dep_tristate ' USB HIDBP Keyboard (basic) support' CONFIG_USB_KBD $CONFIG_USB $CONFIG_INPUT mainmenu_option next_comment
dep_tristate ' USB HIDBP Mouse (basic) support' CONFIG_USB_MOUSE $CONFIG_USB $CONFIG_INPUT comment 'USB HID Boot Protocol drivers'
dep_tristate ' USB HIDBP Keyboard (simple Boot) support' CONFIG_USB_KBD $CONFIG_USB $CONFIG_INPUT
dep_tristate ' USB HIDBP Mouse (simple Boot) support' CONFIG_USB_MOUSE $CONFIG_USB $CONFIG_INPUT
endmenu
fi fi
dep_tristate ' Aiptek 6000U/8000U tablet support' CONFIG_USB_AIPTEK $CONFIG_USB $CONFIG_INPUT dep_tristate ' Aiptek 6000U/8000U tablet support' CONFIG_USB_AIPTEK $CONFIG_USB $CONFIG_INPUT
......
...@@ -109,7 +109,7 @@ static struct urb *simple_alloc_urb ( ...@@ -109,7 +109,7 @@ static struct urb *simple_alloc_urb (
usb_fill_bulk_urb (urb, udev, pipe, 0, bytes, simple_callback, 0); usb_fill_bulk_urb (urb, udev, pipe, 0, bytes, simple_callback, 0);
urb->interval = (udev->speed == USB_SPEED_HIGH) urb->interval = (udev->speed == USB_SPEED_HIGH)
? (INTERRUPT_RATE << 3) ? (INTERRUPT_RATE << 3)
: INTERRUPT_RATE, : INTERRUPT_RATE;
urb->transfer_flags = URB_NO_DMA_MAP; urb->transfer_flags = URB_NO_DMA_MAP;
if (usb_pipein (pipe)) if (usb_pipein (pipe))
urb->transfer_flags |= URB_SHORT_NOT_OK; urb->transfer_flags |= URB_SHORT_NOT_OK;
...@@ -142,7 +142,7 @@ static int simple_io ( ...@@ -142,7 +142,7 @@ static int simple_io (
int retval = 0; int retval = 0;
urb->context = &completion; urb->context = &completion;
while (iterations-- > 0 && retval == 0) { while (retval == 0 && iterations-- > 0) {
init_completion (&completion); init_completion (&completion);
if ((retval = usb_submit_urb (urb, SLAB_KERNEL)) != 0) if ((retval = usb_submit_urb (urb, SLAB_KERNEL)) != 0)
break; break;
...@@ -155,7 +155,7 @@ static int simple_io ( ...@@ -155,7 +155,7 @@ static int simple_io (
if (vary) { if (vary) {
int len = urb->transfer_buffer_length; int len = urb->transfer_buffer_length;
len += max; len += vary;
len %= max; len %= max;
if (len == 0) if (len == 0)
len = (vary < max) ? vary : max; len = (vary < max) ? vary : max;
...@@ -347,7 +347,7 @@ static int set_altsetting (struct usbtest_dev *dev, int alternate) ...@@ -347,7 +347,7 @@ static int set_altsetting (struct usbtest_dev *dev, int alternate)
ep &= USB_ENDPOINT_NUMBER_MASK; ep &= USB_ENDPOINT_NUMBER_MASK;
usb_settoggle (udev, ep, out, 0); usb_settoggle (udev, ep, out, 0);
(out ? udev->epmaxpacketout : udev->epmaxpacketin ) [ep] (out ? udev->epmaxpacketout : udev->epmaxpacketin ) [ep]
= iface_as->endpoint [ep].wMaxPacketSize; = iface_as->endpoint [i].wMaxPacketSize;
} }
return 0; return 0;
...@@ -659,7 +659,7 @@ static int usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *b ...@@ -659,7 +659,7 @@ static int usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *b
break; break;
dbg ("%s TEST 4: read/%d 0..%d bytes %u times", dev->id, dbg ("%s TEST 4: read/%d 0..%d bytes %u times", dev->id,
param->vary, param->length, param->iterations); param->vary, param->length, param->iterations);
urb = simple_alloc_urb (udev, dev->out_pipe, param->length); urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
if (!urb) { if (!urb) {
retval = -ENOMEM; retval = -ENOMEM;
break; break;
...@@ -907,6 +907,14 @@ static struct usbtest_info ez2_info = { ...@@ -907,6 +907,14 @@ static struct usbtest_info ez2_info = {
.alt = 1, .alt = 1,
}; };
/* ezusb family device with dedicated usb test firmware*/
static struct usbtest_info fw_info = {
.name = "usb test device",
.ep_in = 2,
.ep_out = 2,
.alt = 0,
};
#ifdef IBOT2 #ifdef IBOT2
/* this is a nice source of high speed bulk data; /* this is a nice source of high speed bulk data;
* uses an FX2, with firmware provided in the device * uses an FX2, with firmware provided in the device
...@@ -962,6 +970,11 @@ static struct usb_device_id id_table [] = { ...@@ -962,6 +970,11 @@ static struct usb_device_id id_table [] = {
.driver_info = (unsigned long) &ez2_info, .driver_info = (unsigned long) &ez2_info,
}, },
/* re-enumerated usb test device firmware */
{ USB_DEVICE (0xfff0, 0xfff0),
.driver_info = (unsigned long) &fw_info,
},
#ifdef KEYSPAN_19Qi #ifdef KEYSPAN_19Qi
/* Keyspan 19qi uses an21xx (original EZ-USB) */ /* Keyspan 19qi uses an21xx (original EZ-USB) */
// this does not coexist with the real Keyspan 19qi driver! // this does not coexist with the real Keyspan 19qi driver!
......
...@@ -135,6 +135,7 @@ struct usb_eth_dev { ...@@ -135,6 +135,7 @@ struct usb_eth_dev {
#define VENDOR_SMC 0x0707 #define VENDOR_SMC 0x0707
#define VENDOR_SOHOWARE 0x15e8 #define VENDOR_SOHOWARE 0x15e8
#define VENDOR_SIEMENS 0x067c #define VENDOR_SIEMENS 0x067c
#define VENDOR_JTEC 0x11ad
#else /* PEGASUS_DEV */ #else /* PEGASUS_DEV */
...@@ -257,6 +258,8 @@ PEGASUS_DEV( "SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110, ...@@ -257,6 +258,8 @@ PEGASUS_DEV( "SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
DEFAULT_GPIO_RESET | PEGASUS_II ) DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001, PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
DEFAULT_GPIO_RESET | PEGASUS_II ) DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "FA8101 USB To ETHERNET", VENDOR_JTEC, 0x8101,
DEFAULT_GPIO_RESET | PEGASUS_II )
#endif /* PEGASUS_DEV */ #endif /* PEGASUS_DEV */
...@@ -647,6 +647,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, ...@@ -647,6 +647,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
/* no error code, so we must have transferred some data, /* no error code, so we must have transferred some data,
* just not all of it */ * just not all of it */
US_DEBUGP("-- transferred only %d bytes\n", partial);
return USB_STOR_XFER_SHORT; return USB_STOR_XFER_SHORT;
} }
...@@ -654,15 +655,15 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, ...@@ -654,15 +655,15 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
* Transfer an entire SCSI command's worth of data payload over the bulk * Transfer an entire SCSI command's worth of data payload over the bulk
* pipe. * pipe.
* *
* Note that this uses usb_stor_transfer_buf to achieve its goals -- this * Note that this uses usb_stor_bulk_transfer_buf to achieve its goals --
* function simply determines if we're going to use scatter-gather or not, * this function simply determines if we're going to use scatter-gather or not,
* and acts appropriately. For now, it also re-interprets the error codes. * and acts appropriately.
*/ */
int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe, int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe,
char *buf, unsigned int length_left, int use_sg, int *residual) char *buf, unsigned int length_left, int use_sg, int *residual)
{ {
int i; int i;
int result = -1; int result = USB_STOR_XFER_ERROR;
struct scatterlist *sg; struct scatterlist *sg;
unsigned int amount; unsigned int amount;
unsigned int partial; unsigned int partial;
...@@ -1046,9 +1047,11 @@ int usb_stor_CBI_transport(Scsi_Cmnd *srb, struct us_data *us) ...@@ -1046,9 +1047,11 @@ int usb_stor_CBI_transport(Scsi_Cmnd *srb, struct us_data *us)
/* DATA STAGE */ /* DATA STAGE */
/* transfer the data payload for this command, if one exists*/ /* transfer the data payload for this command, if one exists*/
if (transfer_length > 0) { if (transfer_length) {
result = usb_stor_bulk_transfer_srb(us, us->send_bulk_pipe, unsigned int pipe = srb->sc_data_direction == SCSI_DATA_READ ?
srb, transfer_length); us->recv_bulk_pipe : us->send_bulk_pipe;
result = usb_stor_bulk_transfer_srb(us, pipe, srb,
transfer_length);
US_DEBUGP("CBI data stage result is 0x%x\n", result); US_DEBUGP("CBI data stage result is 0x%x\n", result);
/* report any errors */ /* report any errors */
...@@ -1140,6 +1143,7 @@ int usb_stor_CB_transport(Scsi_Cmnd *srb, struct us_data *us) ...@@ -1140,6 +1143,7 @@ int usb_stor_CB_transport(Scsi_Cmnd *srb, struct us_data *us)
if (atomic_read(&us->sm_state) == US_STATE_ABORTING) { if (atomic_read(&us->sm_state) == US_STATE_ABORTING) {
US_DEBUGP("usb_stor_CB_transport(): transfer aborted\n"); US_DEBUGP("usb_stor_CB_transport(): transfer aborted\n");
return USB_STOR_TRANSPORT_ABORTED; return USB_STOR_TRANSPORT_ABORTED;
}
if (result != USB_STOR_XFER_GOOD) { if (result != USB_STOR_XFER_GOOD) {
/* Uh oh... serious problem here */ /* Uh oh... serious problem here */
...@@ -1148,9 +1152,11 @@ int usb_stor_CB_transport(Scsi_Cmnd *srb, struct us_data *us) ...@@ -1148,9 +1152,11 @@ int usb_stor_CB_transport(Scsi_Cmnd *srb, struct us_data *us)
/* DATA STAGE */ /* DATA STAGE */
/* transfer the data payload for this command, if one exists*/ /* transfer the data payload for this command, if one exists*/
if (transfer_length) if (transfer_length) {
result = usb_stor_bulk_transfer_srb(us, us->send_bulk_pipe, unsigned int pipe = srb->sc_data_direction == SCSI_DATA_READ ?
srb, transfer_length); us->recv_bulk_pipe : us->send_bulk_pipe;
result = usb_stor_bulk_transfer_srb(us, pipe, srb,
transfer_length);
US_DEBUGP("CB data stage result is 0x%x\n", result); US_DEBUGP("CB data stage result is 0x%x\n", result);
/* report any errors */ /* report any errors */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment