ARM: kirkwood: refactor dtsi to largest common nodes

Some kirkwood variants (for instance present in the prestera SoCs) do
not have all the peripherals whose nodes are declared in
kirkwood.dtsi. These missing peripherals are SATA, SDIO, and RTC.

As discussed in [1], to avoid that these missing peripherals get
initialized which could result in system hangs when accessing
undocumented/not present HW registers, their corresponding OF nodes
should not get declared at all for some kirkwood variants.

The corresponding OF nodes of these peripherals thus are moved from
kirkwood.dtsi to the kirkwood-628x.dtsi files so that they still are
initialized for these variants where they are present.

[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-May/167154.htmlSigned-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/kirkwood-6281.dtsi

@@ -40,5 +40,33 @@ pmx_sdio: pmx-sdio {
 				marvell,function = "sdio";
 			};
 		};
+
+		rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			status = "disabled";
+		};
+
+		mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/kirkwood-6282.dtsi

@@ -49,6 +49,34 @@ pmx_sdio: pmx-sdio {
 			};
 		};
 
+		rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			status = "disabled";
+		};
+
+		mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+
 		thermal@10078 {
 			compatible = "marvell,kirkwood-thermal";
 			reg = <0x10078 0x4>;

arch/arm/boot/dts/kirkwood-nsa310.dts

 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "ZyXEL NSA310";

arch/arm/boot/dts/kirkwood.dtsi

@@ -71,13 +71,6 @@ serial@12100 {
 			status = "disabled";
 		};
 
-		rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
 		spi@10600 {
 			compatible = "marvell,orion-spi";
 			#address-cells = <1>;
@@ -151,15 +144,6 @@ ehci@50000 {
 			status = "okay";
 		};
 
-		sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			status = "disabled";
-		};
-
 		nand@3000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -194,17 +178,5 @@ crypto@30000 {
 			clocks = <&gate_clk 17>;
 			status = "okay";
 		};
-
-		mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
 	};
 };