Commit df7e131f authored by Sergei Shtylyov's avatar Sergei Shtylyov Committed by Tejun Heo

sata_rcar: clear STOP bit in bmdma_start() method

Iff bmdma_setup() has to stop a DMA transfer before starting a new
one, then the STOP bit in the ATAPI_CONTROL1 register will remain set
(it's only cleared when setting the START bit to 1) and then
bmdma_start() method will set both START and STOP bits simultaneously
which should abort the transfer being just started.  Avoid that by
explicitly clearing the STOP bit in bmdma_start() method (in this case
it will be ignored on write).
Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
parent e771451c
...@@ -549,6 +549,7 @@ static void sata_rcar_bmdma_start(struct ata_queued_cmd *qc) ...@@ -549,6 +549,7 @@ static void sata_rcar_bmdma_start(struct ata_queued_cmd *qc)
/* start host DMA transaction */ /* start host DMA transaction */
dmactl = ioread32(priv->base + ATAPI_CONTROL1_REG); dmactl = ioread32(priv->base + ATAPI_CONTROL1_REG);
dmactl &= ~ATAPI_CONTROL1_STOP;
dmactl |= ATAPI_CONTROL1_START; dmactl |= ATAPI_CONTROL1_START;
iowrite32(dmactl, priv->base + ATAPI_CONTROL1_REG); iowrite32(dmactl, priv->base + ATAPI_CONTROL1_REG);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment