ALSA: fireface: perform sequence replay for media clock recovery

This commit takes ALSA fireface driver to perform sequence replay for
media clock recovery.

The protocol specific to RME Fireface series is not compliant to
IEC 61883-1/6 since it has no CIP header, therefore presentation time
is not used for media clock recovery. The sequence of the number of data
blocks per packet is important.

I note that the device skips an isochronous cycle corresponding to an
empty packet or a NODATA packet in blocking transmission method of
IEC 61883-1/6. For sequence replay, the cycle is handled as receiving an
empty packet. Furthermore, it doesn't start packet transmission till
receiving any packet.

The sequence replay is tested with below models:

* Fireface 400
* Fireface 800
* Fireface 802

I note that it is better to initialize Fireface 400 in advance by
initialization transaction implemented in snd-fireface-ctl-service of
snd-firewire-ctl-services project. You can see whether initialized or
not by HOST LED on the device. Unless, the device often stops packet
transmission even if session starts.

I guess the sequence replay also works well with below models:

* Fireface UFX
* Fireface UCX
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210531025103.17880-7-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

sound/firewire/fireface/amdtp-ff.c

@@ -168,6 +168,6 @@ int amdtp_ff_init(struct amdtp_stream *s, struct fw_unit *unit,
 	else
 		process_ctx_payloads = process_it_ctx_payloads;
 
-	return amdtp_stream_init(s, unit, dir, CIP_NO_HEADER, 0,
+	return amdtp_stream_init(s, unit, dir, CIP_BLOCKING | CIP_UNAWARE_SYT | CIP_NO_HEADER, 0,
 				 process_ctx_payloads, sizeof(struct amdtp_ff));
 }

sound/firewire/fireface/ff-stream.c

@@ -199,7 +199,11 @@ int snd_ff_stream_start_duplex(struct snd_ff *ff, unsigned int rate)
 		if (err < 0)
 			goto error;
 
-		err = amdtp_domain_start(&ff->domain, 0, false, false);
+		// NOTE: The device doesn't transfer packets unless receiving any packet. The
+		// sequence of tx packets includes cycle skip corresponding to empty packet or
+		// NODATA packet in IEC 61883-1/6. The sequence of the number of data blocks per
+		// packet is important for media clock recovery.
+		err = amdtp_domain_start(&ff->domain, 0, true, true);
 		if (err < 0)
 			goto error;