Commit e017fb66 authored by Xiaojian Du's avatar Xiaojian Du Committed by Alex Deucher

drm/amd/pm: modify the fine grain tuning function for Renoir

This patch is to modify the fine grain tuning function for Renoir.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together.
It is risky to add two new flags to common smu struct, so
this patch uses the existing flag to make these two sysfs nodes works
separately. Only when power_dpm_force_perfomance_level is changed
to "manual" mode, the fine grain function will be started.
In other profile modes, including "auto", "high", "low", "profile_peak",
"profile_standard", "profile_min_sclk", "profile_min_mclk",
the fine grain tuning function will be shut down and the frequency range
of gfx will be restored the default value.
Signed-off-by: default avatarXiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: default avatarHuang Rui <ray.huang@amd.com>
Reviewed-by: default avatarKevin Wang <kevin1.wang@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 51e3ca7a
......@@ -2221,7 +2221,7 @@ static int default_attr_update(struct amdgpu_device *adev, struct amdgpu_device_
} else if (DEVICE_ATTR_IS(pp_od_clk_voltage)) {
*states = ATTR_STATE_UNSUPPORTED;
if ((is_support_sw_smu(adev) && adev->smu.od_enabled) ||
(is_support_sw_smu(adev) && adev->smu.fine_grain_enabled) ||
(is_support_sw_smu(adev) && adev->smu.is_apu) ||
(!is_support_sw_smu(adev) && hwmgr->od_enabled))
*states = ATTR_STATE_SUPPORTED;
} else if (DEVICE_ATTR_IS(mem_busy_percent)) {
......
......@@ -466,9 +466,6 @@ struct smu_context
uint32_t gfx_actual_hard_min_freq;
uint32_t gfx_actual_soft_max_freq;
bool fine_grain_enabled;
bool fine_grain_started;
uint32_t cpu_default_soft_min_freq;
uint32_t cpu_default_soft_max_freq;
uint32_t cpu_actual_soft_min_freq;
......
......@@ -416,10 +416,6 @@ static int smu_set_funcs(struct amdgpu_device *adev)
break;
case CHIP_RENOIR:
renoir_set_ppt_funcs(smu);
/* enable the fine grain tuning function by default */
smu->fine_grain_enabled = true;
/* close the fine grain tuning function by default */
smu->fine_grain_started = false;
break;
case CHIP_VANGOGH:
vangogh_set_ppt_funcs(smu);
......
......@@ -349,17 +349,13 @@ static int renoir_od_edit_dpm_table(struct smu_context *smu,
long input[], uint32_t size)
{
int ret = 0;
struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm);
if (!smu->fine_grain_enabled) {
if (!(smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL)) {
dev_warn(smu->adev->dev, "Fine grain is not enabled!\n");
return -EINVAL;
}
if (!smu->fine_grain_started) {
dev_warn(smu->adev->dev, "Fine grain is enabled but not started!\n");
return -EINVAL;
}
switch (type) {
case PP_OD_EDIT_SCLK_VDDC_TABLE:
if (size != 2) {
......@@ -482,6 +478,7 @@ static int renoir_print_clk_levels(struct smu_context *smu,
int i, size = 0, ret = 0;
uint32_t cur_value = 0, value = 0, count = 0, min = 0, max = 0;
SmuMetrics_t metrics;
struct smu_dpm_context *smu_dpm_ctx = &(smu->smu_dpm);
bool cur_value_match_level = false;
memset(&metrics, 0, sizeof(metrics));
......@@ -492,7 +489,7 @@ static int renoir_print_clk_levels(struct smu_context *smu,
switch (clk_type) {
case SMU_OD_RANGE:
if (smu->fine_grain_enabled) {
if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL) {
ret = smu_cmn_send_smc_msg_with_param(smu,
SMU_MSG_GetMinGfxclkFrequency,
0, &min);
......@@ -507,7 +504,7 @@ static int renoir_print_clk_levels(struct smu_context *smu,
}
break;
case SMU_OD_SCLK:
if (smu->fine_grain_enabled) {
if (smu_dpm_ctx->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL) {
min = (smu->gfx_actual_hard_min_freq > 0) ? smu->gfx_actual_hard_min_freq : smu->gfx_default_hard_min_freq;
max = (smu->gfx_actual_soft_max_freq > 0) ? smu->gfx_actual_soft_max_freq : smu->gfx_default_soft_max_freq;
size += sprintf(buf + size, "OD_SCLK\n");
......@@ -897,28 +894,24 @@ static int renoir_set_performance_level(struct smu_context *smu,
switch (level) {
case AMD_DPM_FORCED_LEVEL_HIGH:
smu->fine_grain_started = 0;
smu->gfx_actual_hard_min_freq = smu->gfx_default_hard_min_freq;
smu->gfx_actual_soft_max_freq = smu->gfx_default_soft_max_freq;
ret = renoir_force_dpm_limit_value(smu, true);
break;
case AMD_DPM_FORCED_LEVEL_LOW:
smu->fine_grain_started = 0;
smu->gfx_actual_hard_min_freq = smu->gfx_default_hard_min_freq;
smu->gfx_actual_soft_max_freq = smu->gfx_default_soft_max_freq;
ret = renoir_force_dpm_limit_value(smu, false);
break;
case AMD_DPM_FORCED_LEVEL_AUTO:
smu->fine_grain_started = 0;
smu->gfx_actual_hard_min_freq = smu->gfx_default_hard_min_freq;
smu->gfx_actual_soft_max_freq = smu->gfx_default_soft_max_freq;
ret = renoir_unforce_dpm_levels(smu);
break;
case AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD:
smu->fine_grain_started = 0;
smu->gfx_actual_hard_min_freq = smu->gfx_default_hard_min_freq;
smu->gfx_actual_soft_max_freq = smu->gfx_default_soft_max_freq;
......@@ -974,7 +967,6 @@ static int renoir_set_performance_level(struct smu_context *smu,
break;
case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK:
case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK:
smu->fine_grain_started = 0;
smu->gfx_actual_hard_min_freq = smu->gfx_default_hard_min_freq;
smu->gfx_actual_soft_max_freq = smu->gfx_default_soft_max_freq;
......@@ -989,14 +981,12 @@ static int renoir_set_performance_level(struct smu_context *smu,
renoir_force_clk_levels(smu, SMU_SOCCLK, 1 << soc_mask);
break;
case AMD_DPM_FORCED_LEVEL_PROFILE_PEAK:
smu->fine_grain_started = 0;
smu->gfx_actual_hard_min_freq = smu->gfx_default_hard_min_freq;
smu->gfx_actual_soft_max_freq = smu->gfx_default_soft_max_freq;
ret = renoir_set_peak_clock_by_device(smu);
break;
case AMD_DPM_FORCED_LEVEL_MANUAL:
smu->fine_grain_started = 1;
case AMD_DPM_FORCED_LEVEL_PROFILE_EXIT:
default:
break;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment