Commit e0b7a795 authored by Ezequiel Garcia's avatar Ezequiel Garcia Committed by Stephen Boyd

clk: pistachio: Lock the PLL when enabled upon rate change

Currently, when the rate is changed, the driver makes sure the
PLL is enabled before doing so. This is done because the PLL
cannot be locked while disabled. Once locked, the drivers
returns the PLL to its previous enable/disable state.

This is a bit cumbersome, and can be simplified.

This commit reworks the .set_rate() functions for the integer
and fractional PLLs. Upon rate change, the PLL is now locked
only if it's already enabled.

Also, the driver locks the PLL on .enable(). This makes sure
the PLL is locked when enabled, and not locked when disabled.
Signed-off-by: default avatarAndrew Bresticker <abrestic@chromium.org>
Signed-off-by: default avatarEzequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent 4f4adfbf
......@@ -130,6 +130,8 @@ static int pll_gf40lp_frac_enable(struct clk_hw *hw)
val &= ~PLL_FRAC_CTRL4_BYPASS;
pll_writel(pll, val, PLL_CTRL4);
pll_lock(pll);
return 0;
}
......@@ -155,17 +157,13 @@ static int pll_gf40lp_frac_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct pistachio_clk_pll *pll = to_pistachio_pll(hw);
struct pistachio_pll_rate_table *params;
bool was_enabled;
int enabled = pll_gf40lp_frac_is_enabled(hw);
u32 val;
params = pll_get_params(pll, parent_rate, rate);
if (!params)
return -EINVAL;
was_enabled = pll_gf40lp_frac_is_enabled(hw);
if (!was_enabled)
pll_gf40lp_frac_enable(hw);
val = pll_readl(pll, PLL_CTRL1);
val &= ~((PLL_CTRL1_REFDIV_MASK << PLL_CTRL1_REFDIV_SHIFT) |
(PLL_CTRL1_FBDIV_MASK << PLL_CTRL1_FBDIV_SHIFT));
......@@ -184,11 +182,9 @@ static int pll_gf40lp_frac_set_rate(struct clk_hw *hw, unsigned long rate,
(params->postdiv2 << PLL_FRAC_CTRL2_POSTDIV2_SHIFT);
pll_writel(pll, val, PLL_CTRL2);
if (enabled)
pll_lock(pll);
if (!was_enabled)
pll_gf40lp_frac_disable(hw);
return 0;
}
......@@ -246,6 +242,8 @@ static int pll_gf40lp_laint_enable(struct clk_hw *hw)
val &= ~PLL_INT_CTRL2_BYPASS;
pll_writel(pll, val, PLL_CTRL2);
pll_lock(pll);
return 0;
}
......@@ -271,17 +269,13 @@ static int pll_gf40lp_laint_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct pistachio_clk_pll *pll = to_pistachio_pll(hw);
struct pistachio_pll_rate_table *params;
bool was_enabled;
int enabled = pll_gf40lp_laint_is_enabled(hw);
u32 val;
params = pll_get_params(pll, parent_rate, rate);
if (!params)
return -EINVAL;
was_enabled = pll_gf40lp_laint_is_enabled(hw);
if (!was_enabled)
pll_gf40lp_laint_enable(hw);
val = pll_readl(pll, PLL_CTRL1);
val &= ~((PLL_CTRL1_REFDIV_MASK << PLL_CTRL1_REFDIV_SHIFT) |
(PLL_CTRL1_FBDIV_MASK << PLL_CTRL1_FBDIV_SHIFT) |
......@@ -293,11 +287,9 @@ static int pll_gf40lp_laint_set_rate(struct clk_hw *hw, unsigned long rate,
(params->postdiv2 << PLL_INT_CTRL1_POSTDIV2_SHIFT);
pll_writel(pll, val, PLL_CTRL1);
if (enabled)
pll_lock(pll);
if (!was_enabled)
pll_gf40lp_laint_disable(hw);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment