Merge tag 'fbdev-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev changes from Tomi Valkeinen:

 - omapdss: add DRA7xxx SoC support

 - fbdev: support DMT (Display Monitor Timing) calculation

* tag 'fbdev-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (40 commits)
  omapfb: Return error code when applying overlay settings fails
  OMAPDSS: DPI: DRA7xx support
  OMAPDSS: HDMI: Add DRA7xx support
  OMAPDSS: DISPC: program dispc polarities to control module
  OMAPDSS: DISPC: Add DRA7xx support
  OMAPDSS: Add Video PLLs for DRA7xx
  OMAPDSS: Add functions for external control of PLL
  OMAPDSS: DSS: Add DRA7xx base support
  Doc/DT: Add DT binding doc for DRA7xx DSS
  OMAPDSS: add define for DRA7xx HW version
  OMAPDSS: encoder-tpd12s015: Fix race issue with LS_OE
  OMAPDSS: OMAP5: fix digit output's allowed mgrs
  OMAPDSS: constify port arrays
  OMAPDSS: PLL: add dss_pll_wait_reset_done()
  OMAPDSS: Add enum dss_pll_id
  video: fbdev: fix sys_copyarea
  video/mmpfb: allow modular build
  fb: via: turn gpiolib and i2c selects into dependencies
  fbdev: ssd1307fb: return proper error code if write command fails
  fbdev: fix CVT vertical front and back porch values
  ...

Documentation/devicetree/bindings/video/ti,dra7-dss.txt

+Texas Instruments DRA7x Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,dra7-dss"
+- reg: address and length of the register spaces for 'dss'
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+- syscon: phandle to control module core syscon node
+
+Optional properties:
+
+Some DRA7xx SoCs have one dedicated video PLL, some have two. These properties
+can be used to describe the video PLLs:
+
+- reg: address and length of the register spaces for 'pll1_clkctrl',
+  'pll1', 'pll2_clkctrl', 'pll2'
+- clocks: handle to video1 pll clock and video2 pll clock
+- clock-names: "video1_clk" and "video2_clk"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,dra7-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,dra7-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)

Documentation/devicetree/bindings/video/ti,opa362.txt

+OPA362 analog video amplifier
+
+Required properties:
+- compatible: "ti,opa362"
+- enable-gpios: enable/disable output gpio
+
+Required node:
+- Video port 0 for opa362 input
+- Video port 1 for opa362 output
+
+Example:
+
+tv_amp: opa362 {
+	compatible = "ti,opa362";
+	enable-gpios = <&gpio1 23 0>;  /* GPIO to enable video out amplifier */
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			opa_in: endpoint@0 {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			opa_out: endpoint@0 {
+				remote-endpoint = <&tv_connector_in>;
+			};
+		};
+	};
+};
+
+
+

drivers/video/console/Kconfig

@@ -77,18 +77,22 @@ config DUMMY_CONSOLE
 
 config DUMMY_CONSOLE_COLUMNS
         int "Initial number of console screen columns"
-        depends on PARISC && DUMMY_CONSOLE
-        default "160"
+        depends on DUMMY_CONSOLE && !ARM
+        default 160 if PARISC
+        default 80
         help
-          The default value is 160, which should fit a 1280x1024 monitor.
+          On PA-RISC, the default value is 160, which should fit a 1280x1024
+          monitor.
           Select 80 if you use a 640x480 resolution by default.
 
 config DUMMY_CONSOLE_ROWS
         int "Initial number of console screen rows"
-        depends on PARISC && DUMMY_CONSOLE
-        default "64"
+        depends on DUMMY_CONSOLE && !ARM
+        default 64 if PARISC
+        default 25
         help
-          The default value is 64, which should fit a 1280x1024 monitor.
+          On PA-RISC, the default value is 64, which should fit a 1280x1024
+          monitor.
           Select 25 if you use a 640x480 resolution by default.
 
 config FRAMEBUFFER_CONSOLE

drivers/video/console/dummycon.c

@@ -20,13 +20,10 @@
 #if defined(__arm__)
 #define DUMMY_COLUMNS	screen_info.orig_video_cols
 #define DUMMY_ROWS	screen_info.orig_video_lines
-#elif defined(__hppa__)
+#else
 /* set by Kconfig. Use 80x25 for 640x480 and 160x64 for 1280x1024 */
 #define DUMMY_COLUMNS	CONFIG_DUMMY_CONSOLE_COLUMNS
 #define DUMMY_ROWS	CONFIG_DUMMY_CONSOLE_ROWS
-#else
-#define DUMMY_COLUMNS	80
-#define DUMMY_ROWS	25
 #endif
 
 static const char *dummycon_startup(void)

drivers/video/console/fbcon.c

@@ -146,9 +146,6 @@ static const struct consw fb_con;
 
 static int fbcon_set_origin(struct vc_data *);
 
-#define CURSOR_DRAW_DELAY		(1)
-
-static int vbl_cursor_cnt;
 static int fbcon_cursor_noblink;
 
 #define divides(a, b)	((!(a) || (b)%(a)) ? 0 : 1)
@@ -1329,7 +1326,6 @@ static void fbcon_cursor(struct vc_data *vc, int mode)
 
 	ops->cursor(vc, info, mode, y, get_color(vc, info, c, 1),
 		    get_color(vc, info, c, 0));
-	vbl_cursor_cnt = CURSOR_DRAW_DELAY;
 }
 
 static int scrollback_phys_max = 0;

drivers/video/fbdev/Kconfig

@@ -1530,13 +1530,11 @@ config FB_SIS_315
 
 config FB_VIA
        tristate "VIA UniChrome (Pro) and Chrome9 display support"
-       depends on FB && PCI && X86
+       depends on FB && PCI && X86 && GPIOLIB && I2C
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        select I2C_ALGOBIT
-       select I2C
-       select GPIOLIB
        help
 	  This is the frame buffer device driver for Graphics chips of VIA
 	  UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
@@ -2151,7 +2149,6 @@ config FB_PS3
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT
 	select FB_SYS_FOPS
-	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
 	---help---
 	  Include support for the virtual frame buffer in the PS3 platform.
 

drivers/video/fbdev/aty/atyfb_base.c

@@ -3948,7 +3948,7 @@ static struct notifier_block atyfb_reboot_notifier = {
 	.notifier_call = atyfb_reboot_notify,
 };
 
-static const struct dmi_system_id atyfb_reboot_ids[] = {
+static const struct dmi_system_id atyfb_reboot_ids[] __initconst = {
 	{
 		.ident = "HP OmniBook 500",
 		.matches = {
@@ -3960,6 +3960,7 @@ static const struct dmi_system_id atyfb_reboot_ids[] = {
 
 	{ }
 };
+static bool registered_notifier = false;
 
 static int __init atyfb_init(void)
 {
@@ -3982,15 +3983,17 @@ static int __init atyfb_init(void)
 	if (err1 && err2)
 		return -ENODEV;
 
-	if (dmi_check_system(atyfb_reboot_ids))
+	if (dmi_check_system(atyfb_reboot_ids)) {
 		register_reboot_notifier(&atyfb_reboot_notifier);
+		registered_notifier = true;
+	}
 
 	return 0;
 }
 
 static void __exit atyfb_exit(void)
 {
-	if (dmi_check_system(atyfb_reboot_ids))
+	if (registered_notifier)
 		unregister_reboot_notifier(&atyfb_reboot_notifier);
 
 #ifdef CONFIG_PCI

drivers/video/fbdev/core/fbcvt.c

@@ -369,9 +369,9 @@ int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb)
 	cvt.h_back_porch = cvt.hblank/2 + cvt.h_margin;
 	cvt.h_front_porch = cvt.hblank - cvt.hsync - cvt.h_back_porch +
 		2 * cvt.h_margin;
-	cvt.v_back_porch = 3 + cvt.v_margin;
-	cvt.v_front_porch = cvt.vtotal - cvt.yres/cvt.interlace -
-	    cvt.v_back_porch - cvt.vsync;
+	cvt.v_front_porch = 3 + cvt.v_margin;
+	cvt.v_back_porch = cvt.vtotal - cvt.yres/cvt.interlace -
+	    cvt.v_front_porch - cvt.vsync;
 	fb_cvt_print_name(&cvt);
 	fb_cvt_convert_to_mode(&cvt, mode);
 

drivers/video/fbdev/core/fbmon.c

@@ -496,9 +496,24 @@ static int get_est_timing(unsigned char *block, struct fb_videomode *mode)
 }
 
 static int get_std_timing(unsigned char *block, struct fb_videomode *mode,
-		int ver, int rev)
+			  int ver, int rev, const struct fb_monspecs *specs)
 {
-	int xres, yres = 0, refresh, ratio, i;
+	int i;
+
+	for (i = 0; i < DMT_SIZE; i++) {
+		u32 std_2byte_code = block[0] << 8 | block[1];
+		if (std_2byte_code == dmt_modes[i].std_2byte_code)
+			break;
+	}
+
+	if (i < DMT_SIZE && dmt_modes[i].mode) {
+		/* DMT mode found */
+		*mode = *dmt_modes[i].mode;
+		mode->flag |= FB_MODE_IS_STANDARD;
+		DPRINTK("        DMT id=%d\n", dmt_modes[i].dmt_id);
+
+	} else {
+		int xres, yres = 0, refresh, ratio;
 
 		xres = (block[0] + 31) * 8;
 		if (xres <= 256)
@@ -524,28 +539,28 @@ static int get_std_timing(unsigned char *block, struct fb_videomode *mode,
 			break;
 		}
 		refresh = (block[1] & 0x3f) + 60;
-
 		DPRINTK("      %dx%d@%dHz\n", xres, yres, refresh);
-	for (i = 0; i < VESA_MODEDB_SIZE; i++) {
-		if (vesa_modes[i].xres == xres &&
-		    vesa_modes[i].yres == yres &&
-		    vesa_modes[i].refresh == refresh) {
-			*mode = vesa_modes[i];
-			mode->flag |= FB_MODE_IS_STANDARD;
-			return 1;
+
+		calc_mode_timings(xres, yres, refresh, mode);
 	}
+
+	/* Check the mode we got is within valid spec of the monitor */
+	if (specs && specs->dclkmax
+	    && PICOS2KHZ(mode->pixclock) * 1000 > specs->dclkmax) {
+		DPRINTK("        mode exceed max DCLK\n");
+		return 0;
 	}
-	calc_mode_timings(xres, yres, refresh, mode);
+
 	return 1;
 }
 
-static int get_dst_timing(unsigned char *block,
-			  struct fb_videomode *mode, int ver, int rev)
+static int get_dst_timing(unsigned char *block, struct fb_videomode *mode,
+			  int ver, int rev, const struct fb_monspecs *specs)
 {
 	int j, num = 0;
 
 	for (j = 0; j < 6; j++, block += STD_TIMING_DESCRIPTION_SIZE)
-		num += get_std_timing(block, &mode[num], ver, rev);
+		num += get_std_timing(block, &mode[num], ver, rev, specs);
 
 	return num;
 }
@@ -601,7 +616,8 @@ static void get_detailed_timing(unsigned char *block,
  * This function builds a mode database using the contents of the EDID
  * data
  */
-static struct fb_videomode *fb_create_modedb(unsigned char *edid, int *dbsize)
+static struct fb_videomode *fb_create_modedb(unsigned char *edid, int *dbsize,
+					     const struct fb_monspecs *specs)
 {
 	struct fb_videomode *mode, *m;
 	unsigned char *block;
@@ -643,12 +659,13 @@ static struct fb_videomode *fb_create_modedb(unsigned char *edid, int *dbsize)
 	DPRINTK("   Standard Timings\n");
 	block = edid + STD_TIMING_DESCRIPTIONS_START;
 	for (i = 0; i < STD_TIMING; i++, block += STD_TIMING_DESCRIPTION_SIZE)
-		num += get_std_timing(block, &mode[num], ver, rev);
+		num += get_std_timing(block, &mode[num], ver, rev, specs);
 
 	block = edid + DETAILED_TIMING_DESCRIPTIONS_START;
 	for (i = 0; i < 4; i++, block+= DETAILED_TIMING_DESCRIPTION_SIZE) {
 		if (block[0] == 0x00 && block[1] == 0x00 && block[3] == 0xfa)
-			num += get_dst_timing(block + 5, &mode[num], ver, rev);
+			num += get_dst_timing(block + 5, &mode[num],
+					      ver, rev, specs);
 	}
 
 	/* Yikes, EDID data is totally useless */
@@ -707,7 +724,7 @@ static int fb_get_monitor_limits(unsigned char *edid, struct fb_monspecs *specs)
 		int num_modes, hz, hscan, pixclock;
 		int vtotal, htotal;
 
-		modes = fb_create_modedb(edid, &num_modes);
+		modes = fb_create_modedb(edid, &num_modes, specs);
 		if (!modes) {
 			DPRINTK("None Available\n");
 			return 1;
@@ -964,7 +981,7 @@ void fb_edid_to_monspecs(unsigned char *edid, struct fb_monspecs *specs)
 	DPRINTK("   Display Characteristics:\n");
 	get_monspecs(edid, specs);
 
-	specs->modedb = fb_create_modedb(edid, &specs->modedb_len);
+	specs->modedb = fb_create_modedb(edid, &specs->modedb_len, specs);
 
 	/*
 	 * Workaround for buggy EDIDs that sets that the first

drivers/video/fbdev/core/modedb.c

@@ -468,8 +468,119 @@ const struct fb_videomode vesa_modes[] = {
 	/* 33 1920x1440-75 VESA */
 	{ NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3,
 	  FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 34 1920x1200-60 RB VESA */
+	{ NULL, 60, 1920, 1200, 6493, 80, 48, 26, 3, 32, 6,
+	  FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 35 1920x1200-60 VESA */
+	{ NULL, 60, 1920, 1200, 5174, 336, 136, 36, 3, 200, 6,
+	  FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 36 1920x1200-75 VESA */
+	{ NULL, 75, 1920, 1200, 4077, 344, 136, 46, 3, 208, 6,
+	  FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 37 1920x1200-85 VESA */
+	{ NULL, 85, 1920, 1200, 3555, 352, 144, 53, 3, 208, 6,
+	  FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 38 2560x1600-60 RB VESA */
+	{ NULL, 60, 2560, 1600, 3724, 80, 48, 37, 3, 32, 6,
+	  FB_SYNC_HOR_HIGH_ACT, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 39 2560x1600-60 VESA */
+	{ NULL, 60, 2560, 1600, 2869, 472, 192, 49, 3, 280, 6,
+	  FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 40 2560x1600-75 VESA */
+	{ NULL, 75, 2560, 1600, 2256, 488, 208, 63, 3, 280, 6,
+	  FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 41 2560x1600-85 VESA */
+	{ NULL, 85, 2560, 1600, 1979, 488, 208, 73, 3, 280, 6,
+	  FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 42 2560x1600-120 RB VESA */
+	{ NULL, 120, 2560, 1600, 1809, 80, 48, 85, 3, 32, 6,
+	  FB_SYNC_HOR_HIGH_ACT, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
 };
 EXPORT_SYMBOL(vesa_modes);
+
+const struct dmt_videomode dmt_modes[DMT_SIZE] = {
+	{ 0x01, 0x0000, 0x000000, &vesa_modes[0] },
+	{ 0x02, 0x3119, 0x000000, &vesa_modes[1] },
+	{ 0x03, 0x0000, 0x000000, &vesa_modes[2] },
+	{ 0x04, 0x3140, 0x000000, &vesa_modes[3] },
+	{ 0x05, 0x314c, 0x000000, &vesa_modes[4] },
+	{ 0x06, 0x314f, 0x000000, &vesa_modes[5] },
+	{ 0x07, 0x3159, 0x000000, &vesa_modes[6] },
+	{ 0x08, 0x0000, 0x000000, &vesa_modes[7] },
+	{ 0x09, 0x4540, 0x000000, &vesa_modes[8] },
+	{ 0x0a, 0x454c, 0x000000, &vesa_modes[9] },
+	{ 0x0b, 0x454f, 0x000000, &vesa_modes[10] },
+	{ 0x0c, 0x4559, 0x000000, &vesa_modes[11] },
+	{ 0x0d, 0x0000, 0x000000, NULL },
+	{ 0x0e, 0x0000, 0x000000, NULL },
+	{ 0x0f, 0x0000, 0x000000, &vesa_modes[12] },
+	{ 0x10, 0x6140, 0x000000, &vesa_modes[13] },
+	{ 0x11, 0x614a, 0x000000, &vesa_modes[14] },
+	{ 0x12, 0x614f, 0x000000, &vesa_modes[15] },
+	{ 0x13, 0x6159, 0x000000, &vesa_modes[16] },
+	{ 0x14, 0x0000, 0x000000, NULL },
+	{ 0x15, 0x714f, 0x000000, &vesa_modes[17] },
+	{ 0x16, 0x0000, 0x7f1c21, NULL },
+	{ 0x17, 0x0000, 0x7f1c28, NULL },
+	{ 0x18, 0x0000, 0x7f1c44, NULL },
+	{ 0x19, 0x0000, 0x7f1c62, NULL },
+	{ 0x1a, 0x0000, 0x000000, NULL },
+	{ 0x1b, 0x0000, 0x8f1821, NULL },
+	{ 0x1c, 0x8100, 0x8f1828, NULL },
+	{ 0x1d, 0x810f, 0x8f1844, NULL },
+	{ 0x1e, 0x8119, 0x8f1862, NULL },
+	{ 0x1f, 0x0000, 0x000000, NULL },
+	{ 0x20, 0x8140, 0x000000, &vesa_modes[18] },
+	{ 0x21, 0x8159, 0x000000, &vesa_modes[19] },
+	{ 0x22, 0x0000, 0x000000, NULL },
+	{ 0x23, 0x8180, 0x000000, &vesa_modes[20] },
+	{ 0x24, 0x818f, 0x000000, &vesa_modes[21] },
+	{ 0x25, 0x8199, 0x000000, &vesa_modes[22] },
+	{ 0x26, 0x0000, 0x000000, NULL },
+	{ 0x27, 0x0000, 0x000000, NULL },
+	{ 0x28, 0x0000, 0x000000, NULL },
+	{ 0x29, 0x0000, 0x0c2021, NULL },
+	{ 0x2a, 0x9040, 0x0c2028, NULL },
+	{ 0x2b, 0x904f, 0x0c2044, NULL },
+	{ 0x2c, 0x9059, 0x0c2062, NULL },
+	{ 0x2d, 0x0000, 0x000000, NULL },
+	{ 0x2e, 0x9500, 0xc11821, NULL },
+	{ 0x2f, 0x9500, 0xc11828, NULL },
+	{ 0x30, 0x950f, 0xc11844, NULL },
+	{ 0x31, 0x9519, 0xc11868, NULL },
+	{ 0x32, 0x0000, 0x000000, NULL },
+	{ 0x33, 0xa940, 0x000000, &vesa_modes[23] },
+	{ 0x34, 0xa945, 0x000000, &vesa_modes[24] },
+	{ 0x35, 0xa94a, 0x000000, &vesa_modes[25] },
+	{ 0x36, 0xa94f, 0x000000, &vesa_modes[26] },
+	{ 0x37, 0xa959, 0x000000, &vesa_modes[27] },
+	{ 0x38, 0x0000, 0x000000, NULL },
+	{ 0x39, 0x0000, 0x0c2821, NULL },
+	{ 0x3a, 0xb300, 0x0c2828, NULL },
+	{ 0x3b, 0xb30f, 0x0c2844, NULL },
+	{ 0x3c, 0xb319, 0x0c2868, NULL },
+	{ 0x3d, 0x0000, 0x000000, NULL },
+	{ 0x3e, 0xc140, 0x000000, &vesa_modes[28] },
+	{ 0x3f, 0xc14f, 0x000000, &vesa_modes[29] },
+	{ 0x40, 0x0000, 0x000000, NULL},
+	{ 0x41, 0xc940, 0x000000, &vesa_modes[30] },
+	{ 0x42, 0xc94f, 0x000000, &vesa_modes[31] },
+	{ 0x43, 0x0000, 0x000000, NULL },
+	{ 0x44, 0x0000, 0x572821, &vesa_modes[34] },
+	{ 0x45, 0xd100, 0x572828, &vesa_modes[35] },
+	{ 0x46, 0xd10f, 0x572844, &vesa_modes[36] },
+	{ 0x47, 0xd119, 0x572862, &vesa_modes[37] },
+	{ 0x48, 0x0000, 0x000000, NULL },
+	{ 0x49, 0xd140, 0x000000, &vesa_modes[32] },
+	{ 0x4a, 0xd14f, 0x000000, &vesa_modes[33] },
+	{ 0x4b, 0x0000, 0x000000, NULL },
+	{ 0x4c, 0x0000, 0x1f3821, &vesa_modes[38] },
+	{ 0x4d, 0x0000, 0x1f3828, &vesa_modes[39] },
+	{ 0x4e, 0x0000, 0x1f3844, &vesa_modes[40] },
+	{ 0x4f, 0x0000, 0x1f3862, &vesa_modes[41] },
+	{ 0x50, 0x0000, 0x000000, &vesa_modes[42] },
+};
+EXPORT_SYMBOL(dmt_modes);
 #endif /* CONFIG_FB_MODE_HELPERS */
 
 /**

drivers/video/fbdev/core/syscopyarea.c

@@ -25,8 +25,8 @@
      */
 
 static void
-bitcpy(struct fb_info *p, unsigned long *dst, int dst_idx,
-		const unsigned long *src, int src_idx, int bits, unsigned n)
+bitcpy(struct fb_info *p, unsigned long *dst, unsigned dst_idx,
+	const unsigned long *src, unsigned src_idx, int bits, unsigned n)
 {
 	unsigned long first, last;
 	int const shift = dst_idx-src_idx;
@@ -86,15 +86,15 @@ bitcpy(struct fb_info *p, unsigned long *dst, int dst_idx,
 				first &= last;
 			if (shift > 0) {
 				/* Single source word */
-				*dst = comp(*src >> right, *dst, first);
+				*dst = comp(*src << left, *dst, first);
 			} else if (src_idx+n <= bits) {
 				/* Single source word */
-				*dst = comp(*src << left, *dst, first);
+				*dst = comp(*src >> right, *dst, first);
 			} else {
 				/* 2 source words */
 				d0 = *src++;
 				d1 = *src;
-				*dst = comp(d0 << left | d1 >> right, *dst,
+				*dst = comp(d0 >> right | d1 << left, *dst,
 					    first);
 			}
 		} else {
@@ -109,13 +109,14 @@ bitcpy(struct fb_info *p, unsigned long *dst, int dst_idx,
 			/* Leading bits */
 			if (shift > 0) {
 				/* Single source word */
-				*dst = comp(d0 >> right, *dst, first);
+				*dst = comp(d0 << left, *dst, first);
 				dst++;
 				n -= bits - dst_idx;
 			} else {
 				/* 2 source words */
 				d1 = *src++;
-				*dst = comp(d0 << left | *dst >> right, *dst, first);
+				*dst = comp(d0 >> right | d1 << left, *dst,
+					    first);
 				d0 = d1;
 				dst++;
 				n -= bits - dst_idx;
@@ -126,36 +127,36 @@ bitcpy(struct fb_info *p, unsigned long *dst, int dst_idx,
 			n /= bits;
 			while (n >= 4) {
 				d1 = *src++;
-				*dst++ = d0 << left | d1 >> right;
+				*dst++ = d0 >> right | d1 << left;
 				d0 = d1;
 				d1 = *src++;
-				*dst++ = d0 << left | d1 >> right;
+				*dst++ = d0 >> right | d1 << left;
 				d0 = d1;
 				d1 = *src++;
-				*dst++ = d0 << left | d1 >> right;
+				*dst++ = d0 >> right | d1 << left;
 				d0 = d1;
 				d1 = *src++;
-				*dst++ = d0 << left | d1 >> right;
+				*dst++ = d0 >> right | d1 << left;
 				d0 = d1;
 				n -= 4;
 			}
 			while (n--) {
 				d1 = *src++;
-				*dst++ = d0 << left | d1 >> right;
+				*dst++ = d0 >> right | d1 << left;
 				d0 = d1;
 			}
 
 			/* Trailing bits */
-			if (last) {
-				if (m <= right) {
+			if (m) {
+				if (m <= bits - right) {
 					/* Single source word */
-					*dst = comp(d0 << left, *dst, last);
+					d0 >>= right;
 				} else {
 					/* 2 source words */
  					d1 = *src;
-					*dst = comp(d0 << left | d1 >> right,
-						    *dst, last);
+					d0 = d0 >> right | d1 << left;
 				}
+				*dst = comp(d0, *dst, last);
 			}
 		}
 	}
@@ -166,40 +167,35 @@ bitcpy(struct fb_info *p, unsigned long *dst, int dst_idx,
      */
 
 static void
-bitcpy_rev(struct fb_info *p, unsigned long *dst, int dst_idx,
-		const unsigned long *src, int src_idx, int bits, unsigned n)
+bitcpy_rev(struct fb_info *p, unsigned long *dst, unsigned dst_idx,
+	   const unsigned long *src, unsigned src_idx, unsigned bits,
+	   unsigned n)
 {
 	unsigned long first, last;
 	int shift;
 
-	dst += (n-1)/bits;
-	src += (n-1)/bits;
-	if ((n-1) % bits) {
-		dst_idx += (n-1) % bits;
-		dst += dst_idx >> (ffs(bits) - 1);
-		dst_idx &= bits - 1;
-		src_idx += (n-1) % bits;
-		src += src_idx >> (ffs(bits) - 1);
-		src_idx &= bits - 1;
-	}
+	dst += (dst_idx + n - 1) / bits;
+	src += (src_idx + n - 1) / bits;
+	dst_idx = (dst_idx + n - 1) % bits;
+	src_idx = (src_idx + n - 1) % bits;
 
 	shift = dst_idx-src_idx;
 
-	first = FB_SHIFT_LOW(p, ~0UL, bits - 1 - dst_idx);
-	last = ~(FB_SHIFT_LOW(p, ~0UL, bits - 1 - ((dst_idx-n) % bits)));
+	first = ~FB_SHIFT_HIGH(p, ~0UL, (dst_idx + 1) % bits);
+	last = FB_SHIFT_HIGH(p, ~0UL, (bits + dst_idx + 1 - n) % bits);
 
 	if (!shift) {
 		/* Same alignment for source and dest */
 		if ((unsigned long)dst_idx+1 >= n) {
 			/* Single word */
-			if (last)
-				first &= last;
-			*dst = comp(*src, *dst, first);
+			if (first)
+				last &= first;
+			*dst = comp(*src, *dst, last);
 		} else {
 			/* Multiple destination words */
 
 			/* Leading bits */
-			if (first != ~0UL) {
+			if (first) {
 				*dst = comp(*src, *dst, first);
 				dst--;
 				src--;
@@ -222,29 +218,29 @@ bitcpy_rev(struct fb_info *p, unsigned long *dst, int dst_idx,
 			while (n--)
 				*dst-- = *src--;
 			/* Trailing bits */
-			if (last)
+			if (last != -1UL)
 				*dst = comp(*src, *dst, last);
 		}
 	} else {
 		/* Different alignment for source and dest */
 
-		int const left = -shift & (bits-1);
-		int const right = shift & (bits-1);
+		int const left = shift & (bits-1);
+		int const right = -shift & (bits-1);
 
 		if ((unsigned long)dst_idx+1 >= n) {
 			/* Single destination word */
-			if (last)
-				first &= last;
+			if (first)
+				last &= first;
 			if (shift < 0) {
 				/* Single source word */
-				*dst = comp(*src << left, *dst, first);
+				*dst = comp(*src >> right, *dst, last);
 			} else if (1+(unsigned long)src_idx >= n) {
 				/* Single source word */
-				*dst = comp(*src >> right, *dst, first);
+				*dst = comp(*src << left, *dst, last);
 			} else {
 				/* 2 source words */
-				*dst = comp(*src >> right | *(src-1) << left,
-					    *dst, first);
+				*dst = comp(*src << left | *(src-1) >> right,
+					    *dst, last);
 			}
 		} else {
 			/* Multiple destination words */
@@ -261,14 +257,18 @@ bitcpy_rev(struct fb_info *p, unsigned long *dst, int dst_idx,
 			/* Leading bits */
 			if (shift < 0) {
 				/* Single source word */
-				*dst = comp(d0 << left, *dst, first);
+				d1 = d0;
+				d0 >>= right;
 			} else {
 				/* 2 source words */
 				d1 = *src--;
-				*dst = comp(d0 >> right | d1 << left, *dst,
-					    first);
-				d0 = d1;
+				d0 = d0 << left | d1 >> right;
 			}
+			if (!first)
+				*dst = d0;
+			else
+				*dst = comp(d0, *dst, first);
+			d0 = d1;
 			dst--;
 			n -= dst_idx+1;
 
@@ -277,36 +277,36 @@ bitcpy_rev(struct fb_info *p, unsigned long *dst, int dst_idx,
 			n /= bits;
 			while (n >= 4) {
 				d1 = *src--;
-				*dst-- = d0 >> right | d1 << left;
+				*dst-- = d0 << left | d1 >> right;
 				d0 = d1;
 				d1 = *src--;
-				*dst-- = d0 >> right | d1 << left;
+				*dst-- = d0 << left | d1 >> right;
 				d0 = d1;
 				d1 = *src--;
-				*dst-- = d0 >> right | d1 << left;
+				*dst-- = d0 << left | d1 >> right;
 				d0 = d1;
 				d1 = *src--;
-				*dst-- = d0 >> right | d1 << left;
+				*dst-- = d0 << left | d1 >> right;
 				d0 = d1;
 				n -= 4;
 			}
 			while (n--) {
 				d1 = *src--;
-				*dst-- = d0 >> right | d1 << left;
+				*dst-- = d0 << left | d1 >> right;
 				d0 = d1;
 			}
 
 			/* Trailing bits */
-			if (last) {
-				if (m <= left) {
+			if (m) {
+				if (m <= bits - left) {
 					/* Single source word */
-					*dst = comp(d0 >> right, *dst, last);
+					d0 <<= left;
 				} else {
 					/* 2 source words */
 					d1 = *src;
-					*dst = comp(d0 >> right | d1 << left,
-						    *dst, last);
+					d0 = d0 << left | d1 >> right;
 				}
+				*dst = comp(d0, *dst, last);
 			}
 		}
 	}
@@ -317,9 +317,9 @@ void sys_copyarea(struct fb_info *p, const struct fb_copyarea *area)
 	u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy;
 	u32 height = area->height, width = area->width;
 	unsigned long const bits_per_line = p->fix.line_length*8u;
-	unsigned long *dst = NULL, *src = NULL;
+	unsigned long *base = NULL;
 	int bits = BITS_PER_LONG, bytes = bits >> 3;
-	int dst_idx = 0, src_idx = 0, rev_copy = 0;
+	unsigned dst_idx = 0, src_idx = 0, rev_copy = 0;
 
 	if (p->state != FBINFO_STATE_RUNNING)
 		return;
@@ -334,8 +334,7 @@ void sys_copyarea(struct fb_info *p, const struct fb_copyarea *area)
 
 	/* split the base of the framebuffer into a long-aligned address and
 	   the index of the first bit */
-	dst = src = (unsigned long *)((unsigned long)p->screen_base &
-				      ~(bytes-1));
+	base = (unsigned long *)((unsigned long)p->screen_base & ~(bytes-1));
 	dst_idx = src_idx = 8*((unsigned long)p->screen_base & (bytes-1));
 	/* add offset of source and target area */
 	dst_idx += dy*bits_per_line + dx*p->var.bits_per_pixel;
@@ -348,20 +347,14 @@ void sys_copyarea(struct fb_info *p, const struct fb_copyarea *area)
 		while (height--) {
 			dst_idx -= bits_per_line;
 			src_idx -= bits_per_line;
-			dst += dst_idx >> (ffs(bits) - 1);
-			dst_idx &= (bytes - 1);
-			src += src_idx >> (ffs(bits) - 1);
-			src_idx &= (bytes - 1);
-			bitcpy_rev(p, dst, dst_idx, src, src_idx, bits,
+			bitcpy_rev(p, base + (dst_idx / bits), dst_idx % bits,
+				base + (src_idx / bits), src_idx % bits, bits,
 				width*p->var.bits_per_pixel);
 		}
 	} else {
 		while (height--) {
-			dst += dst_idx >> (ffs(bits) - 1);
-			dst_idx &= (bytes - 1);
-			src += src_idx >> (ffs(bits) - 1);
-			src_idx &= (bytes - 1);
-			bitcpy(p, dst, dst_idx, src, src_idx, bits,
+			bitcpy(p, base + (dst_idx / bits), dst_idx % bits,
+				base + (src_idx / bits), src_idx % bits, bits,
 				width*p->var.bits_per_pixel);
 			dst_idx += bits_per_line;
 			src_idx += bits_per_line;

drivers/video/fbdev/geode/gx1fb_core.c

@@ -374,10 +374,8 @@ static int gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		release_mem_region(gx1_gx_base() + 0x8300, 0x100);
 	}
 
-	if (info) {
 	fb_dealloc_cmap(&info->cmap);
 	framebuffer_release(info);
-	}
 
 	return ret;
 }

drivers/video/fbdev/geode/gxfb_core.c

@@ -444,10 +444,8 @@ static int gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		pci_release_region(pdev, 1);
 	}
 
-	if (info) {
 	fb_dealloc_cmap(&info->cmap);
 	framebuffer_release(info);
-	}
 	return ret;
 }
 

drivers/video/fbdev/geode/lxfb_core.c

@@ -577,10 +577,8 @@ static int lxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		pci_release_region(pdev, 3);
 	}
 
-	if (info) {
 	fb_dealloc_cmap(&info->cmap);
 	framebuffer_release(info);
-	}
 
 	return ret;
 }

drivers/video/fbdev/hgafb.c

@@ -417,8 +417,7 @@ static int hgafb_pan_display(struct fb_var_screeninfo *var,
 			     struct fb_info *info)
 {
 	if (var->vmode & FB_VMODE_YWRAP) {
-		if (var->yoffset < 0 || 
-		    var->yoffset >= info->var.yres_virtual ||
+		if (var->yoffset >= info->var.yres_virtual ||
 		    var->xoffset)
 			return -EINVAL;
 	} else {

drivers/video/fbdev/mmp/Makefile

-obj-y += core.o hw/ panel/ fb/
+obj-$(CONFIG_MMP_DISP) += mmp_disp.o hw/ panel/ fb/
+
+mmp_disp-y		+= core.o

drivers/video/fbdev/mmp/fb/Kconfig

 if MMP_DISP
 
 config MMP_FB
-	bool "fb driver for Marvell MMP Display Subsystem"
+	tristate "fb driver for Marvell MMP Display Subsystem"
 	depends on FB
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA

drivers/video/fbdev/ocfb.c

@@ -61,7 +61,7 @@ struct ocfb_dev {
 	/* flag indicating whether the regs are little endian accessed */
 	int little_endian;
 	/* Physical and virtual addresses of framebuffer */
-	phys_addr_t fb_phys;
+	dma_addr_t fb_phys;
 	void __iomem *fb_virt;
 	u32 pseudo_palette[PALETTE_SIZE];
 };

drivers/video/fbdev/omap2/displays-new/Kconfig

 menu "OMAP Display Device Drivers (new device model)"
         depends on OMAP2_DSS
 
+config DISPLAY_ENCODER_OPA362
+	tristate "OPA362 external analog amplifier"
+	help
+	  Driver for OPA362 external analog TV amplifier controlled
+	  through a GPIO.
+
 config DISPLAY_ENCODER_TFP410
         tristate "TFP410 DPI to DVI Encoder"
 	help

drivers/video/fbdev/omap2/displays-new/Makefile

+obj-$(CONFIG_DISPLAY_ENCODER_OPA362) += encoder-opa362.o
 obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
 obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
 obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o

drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c

@@ -208,7 +208,7 @@ static int tvc_probe_pdata(struct platform_device *pdev)
 	ddata->in = in;
 
 	ddata->connector_type = pdata->connector_type;
-	ddata->invert_polarity = ddata->invert_polarity;
+	ddata->invert_polarity = pdata->invert_polarity;
 
 	dssdev = &ddata->dssdev;
 	dssdev->name = pdata->name;

drivers/video/fbdev/omap2/displays-new/encoder-opa362.c

+/*
+ * OPA362 analog video amplifier with output/power control
+ *
+ * Copyright (C) 2014 Golden Delicious Computers
+ * Author: H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * based on encoder-tfp410
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct gpio_desc *enable_gpio;
+
+	struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int opa362_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(dssdev->dev, "connect\n");
+
+	if (omapdss_device_is_connected(dssdev))
+		return -EBUSY;
+
+	r = in->ops.atv->connect(in, dssdev);
+	if (r)
+		return r;
+
+	dst->src = dssdev;
+	dssdev->dst = dst;
+
+	return 0;
+}
+
+static void opa362_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "disconnect\n");
+
+	WARN_ON(!omapdss_device_is_connected(dssdev));
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	WARN_ON(dst != dssdev->dst);
+	if (dst != dssdev->dst)
+		return;
+
+	dst->src = NULL;
+	dssdev->dst = NULL;
+
+	in->ops.atv->disconnect(in, &ddata->dssdev);
+}
+
+static int opa362_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(dssdev->dev, "enable\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.atv->set_timings(in, &ddata->timings);
+
+	r = in->ops.atv->enable(in);
+	if (r)
+		return r;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void opa362_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "disable\n");
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
+
+	in->ops.atv->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void opa362_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "set_timings\n");
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.atv->set_timings(in, timings);
+}
+
+static void opa362_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	dev_dbg(dssdev->dev, "get_timings\n");
+
+	*timings = ddata->timings;
+}
+
+static int opa362_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "check_timings\n");
+
+	return in->ops.atv->check_timings(in, timings);
+}
+
+static void opa362_set_type(struct omap_dss_device *dssdev,
+		enum omap_dss_venc_type type)
+{
+	/* we can only drive a COMPOSITE output */
+	WARN_ON(type != OMAP_DSS_VENC_TYPE_COMPOSITE);
+
+}
+
+static const struct omapdss_atv_ops opa362_atv_ops = {
+	.connect	= opa362_connect,
+	.disconnect	= opa362_disconnect,
+
+	.enable		= opa362_enable,
+	.disable	= opa362_disable,
+
+	.check_timings	= opa362_check_timings,
+	.set_timings	= opa362_set_timings,
+	.get_timings	= opa362_get_timings,
+
+	.set_type	= opa362_set_type,
+};
+
+static int opa362_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev, *in;
+	struct gpio_desc *gpio;
+	int r;
+
+	dev_dbg(&pdev->dev, "probe\n");
+
+	if (node == NULL) {
+		dev_err(&pdev->dev, "Unable to find device tree\n");
+		return -EINVAL;
+	}
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	gpio = devm_gpiod_get(&pdev->dev, "enable");
+	if (IS_ERR(gpio)) {
+		if (PTR_ERR(gpio) != -ENOENT)
+			return PTR_ERR(gpio);
+
+		gpio = NULL;
+	} else {
+		gpiod_direction_output(gpio, 0);
+	}
+
+	ddata->enable_gpio = gpio;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->ops.atv = &opa362_atv_ops;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->output_type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->owner = THIS_MODULE;
+
+	r = omapdss_register_output(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register output\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit opa362_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_output(&ddata->dssdev);
+
+	WARN_ON(omapdss_device_is_enabled(dssdev));
+	if (omapdss_device_is_enabled(dssdev))
+		opa362_disable(dssdev);
+
+	WARN_ON(omapdss_device_is_connected(dssdev));
+	if (omapdss_device_is_connected(dssdev))
+		opa362_disconnect(dssdev, dssdev->dst);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id opa362_of_match[] = {
+	{ .compatible = "omapdss,ti,opa362", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, opa362_of_match);
+
+static struct platform_driver opa362_driver = {
+	.probe	= opa362_probe,
+	.remove	= __exit_p(opa362_remove),
+	.driver	= {
+		.name	= "amplifier-opa362",
+		.owner	= THIS_MODULE,
+		.of_match_table = opa362_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(opa362_driver);
+
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
+MODULE_DESCRIPTION("OPA362 analog video amplifier with output/power control");
+MODULE_LICENSE("GPL v2");

drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c

@@ -29,33 +29,10 @@ struct panel_drv_data {
 	int hpd_gpio;
 
 	struct omap_video_timings timings;
-
-	struct completion hpd_completion;
 };
 
 #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
 
-static irqreturn_t tpd_hpd_irq_handler(int irq, void *data)
-{
-	struct panel_drv_data *ddata = data;
-	bool hpd;
-
-	hpd = gpio_get_value_cansleep(ddata->hpd_gpio);
-
-	dev_dbg(ddata->dssdev.dev, "hpd %d\n", hpd);
-
-	if (gpio_is_valid(ddata->ls_oe_gpio)) {
-		if (hpd)
-			gpio_set_value_cansleep(ddata->ls_oe_gpio, 1);
-		else
-			gpio_set_value_cansleep(ddata->ls_oe_gpio, 0);
-	}
-
-	complete_all(&ddata->hpd_completion);
-
-	return IRQ_HANDLED;
-}
-
 static int tpd_connect(struct omap_dss_device *dssdev,
 		struct omap_dss_device *dst)
 {
@@ -70,23 +47,10 @@ static int tpd_connect(struct omap_dss_device *dssdev,
 	dst->src = dssdev;
 	dssdev->dst = dst;
 
-	reinit_completion(&ddata->hpd_completion);
-
 	gpio_set_value_cansleep(ddata->ct_cp_hpd_gpio, 1);
 	/* DC-DC converter needs at max 300us to get to 90% of 5V */
 	udelay(300);
 
-	/*
-	 * If there's a cable connected, wait for the hpd irq to trigger,
-	 * which turns on the level shifters.
-	 */
-	if (gpio_get_value_cansleep(ddata->hpd_gpio)) {
-		unsigned long to;
-		to = wait_for_completion_timeout(&ddata->hpd_completion,
-				msecs_to_jiffies(250));
-		WARN_ON_ONCE(to == 0);
-	}
-
 	return 0;
 }
 
@@ -179,11 +143,20 @@ static int tpd_read_edid(struct omap_dss_device *dssdev,
 {
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
 	struct omap_dss_device *in = ddata->in;
+	int r;
 
 	if (!gpio_get_value_cansleep(ddata->hpd_gpio))
 		return -ENODEV;
 
-	return in->ops.hdmi->read_edid(in, edid, len);
+	if (gpio_is_valid(ddata->ls_oe_gpio))
+		gpio_set_value_cansleep(ddata->ls_oe_gpio, 1);
+
+	r = in->ops.hdmi->read_edid(in, edid, len);
+
+	if (gpio_is_valid(ddata->ls_oe_gpio))
+		gpio_set_value_cansleep(ddata->ls_oe_gpio, 0);
+
+	return r;
 }
 
 static bool tpd_detect(struct omap_dss_device *dssdev)
@@ -309,8 +282,6 @@ static int tpd_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ddata);
 
-	init_completion(&ddata->hpd_completion);
-
 	if (dev_get_platdata(&pdev->dev)) {
 		r = tpd_probe_pdata(pdev);
 		if (r)
@@ -340,13 +311,6 @@ static int tpd_probe(struct platform_device *pdev)
 	if (r)
 		goto err_gpio;
 
-	r = devm_request_threaded_irq(&pdev->dev, gpio_to_irq(ddata->hpd_gpio),
-				 NULL, tpd_hpd_irq_handler,
-				 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-				 IRQF_ONESHOT, "hpd", ddata);
-	if (r)
-		goto err_irq;
-
 	dssdev = &ddata->dssdev;
 	dssdev->ops.hdmi = &tpd_hdmi_ops;
 	dssdev->dev = &pdev->dev;
@@ -365,7 +329,6 @@ static int tpd_probe(struct platform_device *pdev)
 
 	return 0;
 err_reg:
-err_irq:
 err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;

drivers/video/fbdev/omap2/dss/Makefile

@@ -2,7 +2,7 @@ obj-$(CONFIG_OMAP2_DSS_INIT) += omapdss-boot-init.o
 obj-$(CONFIG_OMAP2_DSS) += omapdss.o
 # Core DSS files
 omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
-	output.o dss-of.o pll.o
+	output.o dss-of.o pll.o video-pll.o
 # DSS compat layer files
 omapdss-y += manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o \
 	dispc-compat.o display-sysfs.o

drivers/video/fbdev/omap2/dss/dispc.c

@@ -36,6 +36,9 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/sizes.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
 
 #include <video/omapdss.h>
 
@@ -117,6 +120,9 @@ static struct {
 	const struct dispc_features *feat;
 
 	bool is_enabled;
+
+	struct regmap *syscon_pol;
+	u32 syscon_pol_offset;
 } dispc;
 
 enum omap_color_component {
@@ -2958,6 +2964,25 @@ static void _dispc_mgr_set_lcd_timings(enum omap_channel channel, int hsw,
 		FLD_VAL(vsync_level, 12, 12);
 
 	dispc_write_reg(DISPC_POL_FREQ(channel), l);
+
+	if (dispc.syscon_pol) {
+		const int shifts[] = {
+			[OMAP_DSS_CHANNEL_LCD] = 0,
+			[OMAP_DSS_CHANNEL_LCD2] = 1,
+			[OMAP_DSS_CHANNEL_LCD3] = 2,
+		};
+
+		u32 mask, val;
+
+		mask = (1 << 0) | (1 << 3) | (1 << 6);
+		val = (rf << 0) | (ipc << 3) | (onoff << 6);
+
+		mask <<= 16 + shifts[channel];
+		val <<= 16 + shifts[channel];
+
+		regmap_update_bits(dispc.syscon_pol, dispc.syscon_pol_offset,
+			mask, val);
+	}
 }
 
 /* change name to mode? */
@@ -3037,10 +3062,16 @@ unsigned long dispc_fclk_rate(void)
 		break;
 	case OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC:
 		pll = dss_pll_find("dsi0");
+		if (!pll)
+			pll = dss_pll_find("video0");
+
 		r = pll->cinfo.clkout[0];
 		break;
 	case OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC:
 		pll = dss_pll_find("dsi1");
+		if (!pll)
+			pll = dss_pll_find("video1");
+
 		r = pll->cinfo.clkout[0];
 		break;
 	default:
@@ -3069,10 +3100,16 @@ unsigned long dispc_mgr_lclk_rate(enum omap_channel channel)
 			break;
 		case OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC:
 			pll = dss_pll_find("dsi0");
+			if (!pll)
+				pll = dss_pll_find("video0");
+
 			r = pll->cinfo.clkout[0];
 			break;
 		case OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC:
 			pll = dss_pll_find("dsi1");
+			if (!pll)
+				pll = dss_pll_find("video1");
+
 			r = pll->cinfo.clkout[0];
 			break;
 		default:
@@ -3668,6 +3705,7 @@ static int __init dispc_init_features(struct platform_device *pdev)
 		break;
 
 	case OMAPDSS_VER_OMAP5:
+	case OMAPDSS_VER_DRA7xx:
 		src = &omap54xx_dispc_feats;
 		break;
 
@@ -3728,6 +3766,7 @@ static int __init omap_dispchw_probe(struct platform_device *pdev)
 	u32 rev;
 	int r = 0;
 	struct resource *dispc_mem;
+	struct device_node *np = pdev->dev.of_node;
 
 	dispc.pdev = pdev;
 
@@ -3754,6 +3793,20 @@ static int __init omap_dispchw_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	if (np && of_property_read_bool(np, "syscon-pol")) {
+		dispc.syscon_pol = syscon_regmap_lookup_by_phandle(np, "syscon-pol");
+		if (IS_ERR(dispc.syscon_pol)) {
+			dev_err(&pdev->dev, "failed to get syscon-pol regmap\n");
+			return PTR_ERR(dispc.syscon_pol);
+		}
+
+		if (of_property_read_u32_index(np, "syscon-pol", 1,
+				&dispc.syscon_pol_offset)) {
+			dev_err(&pdev->dev, "failed to get syscon-pol offset\n");
+			return -EINVAL;
+		}
+	}
+
 	pm_runtime_enable(&pdev->dev);
 
 	r = dispc_runtime_get();
@@ -3832,6 +3885,7 @@ static const struct of_device_id dispc_of_match[] = {
 	{ .compatible = "ti,omap3-dispc", },
 	{ .compatible = "ti,omap4-dispc", },
 	{ .compatible = "ti,omap5-dispc", },
+	{ .compatible = "ti,dra7-dispc", },
 	{},
 };
 

drivers/video/fbdev/omap2/dss/dpi.c

@@ -106,6 +106,17 @@ static struct dss_pll *dpi_get_pll(enum omap_channel channel)
 			return NULL;
 		}
 
+	case OMAPDSS_VER_DRA7xx:
+		switch (channel) {
+		case OMAP_DSS_CHANNEL_LCD:
+		case OMAP_DSS_CHANNEL_LCD2:
+			return dss_pll_find("video0");
+		case OMAP_DSS_CHANNEL_LCD3:
+			return dss_pll_find("video1");
+		default:
+			return NULL;
+		}
+
 	default:
 		return NULL;
 	}
@@ -590,6 +601,10 @@ static void dpi_init_pll(struct dpi_data *dpi)
 	if (!pll)
 		return;
 
+	/* On DRA7 we need to set a mux to use the PLL */
+	if (omapdss_get_version() == OMAPDSS_VER_DRA7xx)
+		dss_ctrl_pll_set_control_mux(pll->id, dpi->output.dispc_channel);
+
 	if (dpi_verify_dsi_pll(pll)) {
 		DSSWARN("DSI PLL not operational\n");
 		return;
@@ -615,6 +630,17 @@ static enum omap_channel dpi_get_channel(int port_num)
 	case OMAPDSS_VER_AM43xx:
 		return OMAP_DSS_CHANNEL_LCD;
 
+	case OMAPDSS_VER_DRA7xx:
+		switch (port_num) {
+		case 2:
+			return OMAP_DSS_CHANNEL_LCD3;
+		case 1:
+			return OMAP_DSS_CHANNEL_LCD2;
+		case 0:
+		default:
+			return OMAP_DSS_CHANNEL_LCD;
+		}
+
 	case OMAPDSS_VER_OMAP4430_ES1:
 	case OMAPDSS_VER_OMAP4430_ES2:
 	case OMAPDSS_VER_OMAP4:

drivers/video/fbdev/omap2/dss/dsi.c

@@ -5238,6 +5238,7 @@ static int dsi_init_pll_data(struct platform_device *dsidev)
 	}
 
 	pll->name = dsi->module_id == 0 ? "dsi0" : "dsi1";
+	pll->id = dsi->module_id == 0 ? DSS_PLL_DSI1 : DSS_PLL_DSI2;
 	pll->clkin = clk;
 	pll->base = dsi->pll_base;
 

drivers/video/fbdev/omap2/dss/dss.c

@@ -34,7 +34,10 @@
 #include <linux/pm_runtime.h>
 #include <linux/gfp.h>
 #include <linux/sizes.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 #include <linux/of.h>
+#include <linux/regulator/consumer.h>
 
 #include <video/omapdss.h>
 
@@ -63,14 +66,11 @@ struct dss_reg {
 #define REG_FLD_MOD(idx, val, start, end) \
 	dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end))
 
-static int dss_runtime_get(void);
-static void dss_runtime_put(void);
-
 struct dss_features {
 	u8 fck_div_max;
 	u8 dss_fck_multiplier;
 	const char *parent_clk_name;
-	enum omap_display_type *ports;
+	const enum omap_display_type *ports;
 	int num_ports;
 	int (*dpi_select_source)(int port, enum omap_channel channel);
 };
@@ -78,6 +78,8 @@ struct dss_features {
 static struct {
 	struct platform_device *pdev;
 	void __iomem    *base;
+	struct regmap	*syscon_pll_ctrl;
+	u32		syscon_pll_ctrl_offset;
 
 	struct clk	*parent_clk;
 	struct clk	*dss_clk;
@@ -95,6 +97,9 @@ static struct {
 	u32		ctx[DSS_SZ_REGS / sizeof(u32)];
 
 	const struct dss_features *feat;
+
+	struct dss_pll	*video1_pll;
+	struct dss_pll	*video2_pll;
 } dss;
 
 static const char * const dss_generic_clk_source_names[] = {
@@ -158,6 +163,99 @@ static void dss_restore_context(void)
 #undef SR
 #undef RR
 
+void dss_ctrl_pll_enable(enum dss_pll_id pll_id, bool enable)
+{
+	unsigned shift;
+	unsigned val;
+
+	if (!dss.syscon_pll_ctrl)
+		return;
+
+	val = !enable;
+
+	switch (pll_id) {
+	case DSS_PLL_VIDEO1:
+		shift = 0;
+		break;
+	case DSS_PLL_VIDEO2:
+		shift = 1;
+		break;
+	case DSS_PLL_HDMI:
+		shift = 2;
+		break;
+	default:
+		DSSERR("illegal DSS PLL ID %d\n", pll_id);
+		return;
+	}
+
+	regmap_update_bits(dss.syscon_pll_ctrl, dss.syscon_pll_ctrl_offset,
+		1 << shift, val << shift);
+}
+
+void dss_ctrl_pll_set_control_mux(enum dss_pll_id pll_id,
+	enum omap_channel channel)
+{
+	unsigned shift, val;
+
+	if (!dss.syscon_pll_ctrl)
+		return;
+
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		shift = 3;
+
+		switch (pll_id) {
+		case DSS_PLL_VIDEO1:
+			val = 0; break;
+		case DSS_PLL_HDMI:
+			val = 1; break;
+		default:
+			DSSERR("error in PLL mux config for LCD\n");
+			return;
+		}
+
+		break;
+	case OMAP_DSS_CHANNEL_LCD2:
+		shift = 5;
+
+		switch (pll_id) {
+		case DSS_PLL_VIDEO1:
+			val = 0; break;
+		case DSS_PLL_VIDEO2:
+			val = 1; break;
+		case DSS_PLL_HDMI:
+			val = 2; break;
+		default:
+			DSSERR("error in PLL mux config for LCD2\n");
+			return;
+		}
+
+		break;
+	case OMAP_DSS_CHANNEL_LCD3:
+		shift = 7;
+
+		switch (pll_id) {
+		case DSS_PLL_VIDEO1:
+			val = 1; break;
+		case DSS_PLL_VIDEO2:
+			val = 0; break;
+		case DSS_PLL_HDMI:
+			val = 2; break;
+		default:
+			DSSERR("error in PLL mux config for LCD3\n");
+			return;
+		}
+
+		break;
+	default:
+		DSSERR("error in PLL mux config\n");
+		return;
+	}
+
+	regmap_update_bits(dss.syscon_pll_ctrl, dss.syscon_pll_ctrl_offset,
+		0x3 << shift, val << shift);
+}
+
 void dss_sdi_init(int datapairs)
 {
 	u32 l;
@@ -605,6 +703,26 @@ static int dss_dpi_select_source_omap5(int port, enum omap_channel channel)
 	return 0;
 }
 
+static int dss_dpi_select_source_dra7xx(int port, enum omap_channel channel)
+{
+	switch (port) {
+	case 0:
+		return dss_dpi_select_source_omap5(port, channel);
+	case 1:
+		if (channel != OMAP_DSS_CHANNEL_LCD2)
+			return -EINVAL;
+		break;
+	case 2:
+		if (channel != OMAP_DSS_CHANNEL_LCD3)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 int dss_dpi_select_source(int port, enum omap_channel channel)
 {
 	return dss.feat->dpi_select_source(port, channel);
@@ -643,7 +761,7 @@ static void dss_put_clocks(void)
 		clk_put(dss.parent_clk);
 }
 
-static int dss_runtime_get(void)
+int dss_runtime_get(void)
 {
 	int r;
 
@@ -654,7 +772,7 @@ static int dss_runtime_get(void)
 	return r < 0 ? r : 0;
 }
 
-static void dss_runtime_put(void)
+void dss_runtime_put(void)
 {
 	int r;
 
@@ -677,15 +795,21 @@ void dss_debug_dump_clocks(struct seq_file *s)
 #endif
 
 
-static enum omap_display_type omap2plus_ports[] = {
+static const enum omap_display_type omap2plus_ports[] = {
 	OMAP_DISPLAY_TYPE_DPI,
 };
 
-static enum omap_display_type omap34xx_ports[] = {
+static const enum omap_display_type omap34xx_ports[] = {
 	OMAP_DISPLAY_TYPE_DPI,
 	OMAP_DISPLAY_TYPE_SDI,
 };
 
+static const enum omap_display_type dra7xx_ports[] = {
+	OMAP_DISPLAY_TYPE_DPI,
+	OMAP_DISPLAY_TYPE_DPI,
+	OMAP_DISPLAY_TYPE_DPI,
+};
+
 static const struct dss_features omap24xx_dss_feats __initconst = {
 	/*
 	 * fck div max is really 16, but the divider range has gaps. The range
@@ -744,6 +868,15 @@ static const struct dss_features am43xx_dss_feats __initconst = {
 	.num_ports		=	ARRAY_SIZE(omap2plus_ports),
 };
 
+static const struct dss_features dra7xx_dss_feats __initconst = {
+	.fck_div_max		=	64,
+	.dss_fck_multiplier	=	1,
+	.parent_clk_name	=	"dpll_per_x2_ck",
+	.dpi_select_source	=	&dss_dpi_select_source_dra7xx,
+	.ports			=	dra7xx_ports,
+	.num_ports		=	ARRAY_SIZE(dra7xx_ports),
+};
+
 static int __init dss_init_features(struct platform_device *pdev)
 {
 	const struct dss_features *src;
@@ -784,6 +917,10 @@ static int __init dss_init_features(struct platform_device *pdev)
 		src = &am43xx_dss_feats;
 		break;
 
+	case OMAPDSS_VER_DRA7xx:
+		src = &dra7xx_dss_feats;
+		break;
+
 	default:
 		return -ENODEV;
 	}
@@ -884,8 +1021,10 @@ static void __exit dss_uninit_ports(struct platform_device *pdev)
 static int __init omap_dsshw_probe(struct platform_device *pdev)
 {
 	struct resource *dss_mem;
+	struct device_node *np = pdev->dev.of_node;
 	u32 rev;
 	int r;
+	struct regulator *pll_regulator;
 
 	dss.pdev = pdev;
 
@@ -940,6 +1079,57 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
 
 	dss_init_ports(pdev);
 
+	if (np && of_property_read_bool(np, "syscon-pll-ctrl")) {
+		dss.syscon_pll_ctrl = syscon_regmap_lookup_by_phandle(np,
+			"syscon-pll-ctrl");
+		if (IS_ERR(dss.syscon_pll_ctrl)) {
+			dev_err(&pdev->dev,
+				"failed to get syscon-pll-ctrl regmap\n");
+			return PTR_ERR(dss.syscon_pll_ctrl);
+		}
+
+		if (of_property_read_u32_index(np, "syscon-pll-ctrl", 1,
+				&dss.syscon_pll_ctrl_offset)) {
+			dev_err(&pdev->dev,
+				"failed to get syscon-pll-ctrl offset\n");
+			return -EINVAL;
+		}
+	}
+
+	pll_regulator = devm_regulator_get(&pdev->dev, "vdda_video");
+	if (IS_ERR(pll_regulator)) {
+		r = PTR_ERR(pll_regulator);
+
+		switch (r) {
+		case -ENOENT:
+			pll_regulator = NULL;
+			break;
+
+		case -EPROBE_DEFER:
+			return -EPROBE_DEFER;
+
+		default:
+			DSSERR("can't get DPLL VDDA regulator\n");
+			return r;
+		}
+	}
+
+	if (of_property_match_string(np, "reg-names", "pll1") >= 0) {
+		dss.video1_pll = dss_video_pll_init(pdev, 0, pll_regulator);
+		if (IS_ERR(dss.video1_pll)) {
+			r = PTR_ERR(dss.video1_pll);
+			goto err_pll_init;
+		}
+	}
+
+	if (of_property_match_string(np, "reg-names", "pll2") >= 0) {
+		dss.video2_pll = dss_video_pll_init(pdev, 1, pll_regulator);
+		if (IS_ERR(dss.video2_pll)) {
+			r = PTR_ERR(dss.video2_pll);
+			goto err_pll_init;
+		}
+	}
+
 	rev = dss_read_reg(DSS_REVISION);
 	printk(KERN_INFO "OMAP DSS rev %d.%d\n",
 			FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
@@ -950,6 +1140,12 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_pll_init:
+	if (dss.video1_pll)
+		dss_video_pll_uninit(dss.video1_pll);
+
+	if (dss.video2_pll)
+		dss_video_pll_uninit(dss.video2_pll);
 err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
 err_setup_clocks:
@@ -959,6 +1155,12 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
 
 static int __exit omap_dsshw_remove(struct platform_device *pdev)
 {
+	if (dss.video1_pll)
+		dss_video_pll_uninit(dss.video1_pll);
+
+	if (dss.video2_pll)
+		dss_video_pll_uninit(dss.video2_pll);
+
 	dss_uninit_ports(pdev);
 
 	pm_runtime_disable(&pdev->dev);
@@ -1003,6 +1205,7 @@ static const struct of_device_id dss_of_match[] = {
 	{ .compatible = "ti,omap3-dss", },
 	{ .compatible = "ti,omap4-dss", },
 	{ .compatible = "ti,omap5-dss", },
+	{ .compatible = "ti,dra7-dss", },
 	{},
 };
 

drivers/video/fbdev/omap2/dss/dss.h

@@ -100,6 +100,14 @@ enum dss_writeback_channel {
 	DSS_WB_LCD3_MGR =	7,
 };
 
+enum dss_pll_id {
+	DSS_PLL_DSI1,
+	DSS_PLL_DSI2,
+	DSS_PLL_HDMI,
+	DSS_PLL_VIDEO1,
+	DSS_PLL_VIDEO2,
+};
+
 struct dss_pll;
 
 #define DSS_PLL_MAX_HSDIVS 4
@@ -150,6 +158,7 @@ struct dss_pll_hw {
 
 struct dss_pll {
 	const char *name;
+	enum dss_pll_id id;
 
 	struct clk *clkin;
 	struct regulator *regulator;
@@ -250,6 +259,9 @@ void dss_overlay_kobj_uninit(struct omap_overlay *ovl);
 int dss_init_platform_driver(void) __init;
 void dss_uninit_platform_driver(void);
 
+int dss_runtime_get(void);
+void dss_runtime_put(void);
+
 unsigned long dss_get_dispc_clk_rate(void);
 int dss_dpi_select_source(int port, enum omap_channel channel);
 void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select);
@@ -257,6 +269,11 @@ enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void);
 const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src);
 void dss_dump_clocks(struct seq_file *s);
 
+/* DSS VIDEO PLL */
+struct dss_pll *dss_video_pll_init(struct platform_device *pdev, int id,
+	struct regulator *regulator);
+void dss_video_pll_uninit(struct dss_pll *pll);
+
 /* dss-of */
 struct device_node *dss_of_port_get_parent_device(struct device_node *port);
 u32 dss_of_port_get_port_number(struct device_node *port);
@@ -265,6 +282,10 @@ u32 dss_of_port_get_port_number(struct device_node *port);
 void dss_debug_dump_clocks(struct seq_file *s);
 #endif
 
+void dss_ctrl_pll_enable(enum dss_pll_id pll_id, bool enable);
+void dss_ctrl_pll_set_control_mux(enum dss_pll_id pll_id,
+	enum omap_channel channel);
+
 void dss_sdi_init(int datapairs);
 int dss_sdi_enable(void);
 void dss_sdi_disable(void);
@@ -446,5 +467,6 @@ int dss_pll_write_config_type_a(struct dss_pll *pll,
 		const struct dss_pll_clock_info *cinfo);
 int dss_pll_write_config_type_b(struct dss_pll *pll,
 		const struct dss_pll_clock_info *cinfo);
+int dss_pll_wait_reset_done(struct dss_pll *pll);
 
 #endif

drivers/video/fbdev/omap2/dss/dss_features.c

@@ -223,7 +223,7 @@ static const enum omap_dss_output_id omap5_dss_supported_outputs[] = {
 	OMAP_DSS_OUTPUT_DSI1 | OMAP_DSS_OUTPUT_DSI2,
 
 	/* OMAP_DSS_CHANNEL_DIGIT */
-	OMAP_DSS_OUTPUT_HDMI | OMAP_DSS_OUTPUT_DPI,
+	OMAP_DSS_OUTPUT_HDMI,
 
 	/* OMAP_DSS_CHANNEL_LCD2 */
 	OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
@@ -943,6 +943,7 @@ void dss_features_init(enum omapdss_version version)
 		break;
 
 	case OMAPDSS_VER_OMAP5:
+	case OMAPDSS_VER_DRA7xx:
 		omap_current_dss_features = &omap5_dss_features;
 		break;
 

drivers/video/fbdev/omap2/dss/hdmi5.c

@@ -787,6 +787,7 @@ static const struct dev_pm_ops hdmi_pm_ops = {
 
 static const struct of_device_id hdmi_of_match[] = {
 	{ .compatible = "ti,omap5-hdmi", },
+	{ .compatible = "ti,dra7-hdmi", },
 	{},
 };
 

drivers/video/fbdev/omap2/dss/hdmi_phy.c

@@ -208,6 +208,7 @@ static int hdmi_phy_init_features(struct platform_device *pdev)
 		break;
 
 	case OMAPDSS_VER_OMAP5:
+	case OMAPDSS_VER_DRA7xx:
 		src = &omap54xx_phy_feats;
 		break;
 

drivers/video/fbdev/omap2/dss/hdmi_pll.c

@@ -104,6 +104,8 @@ static int hdmi_pll_enable(struct dss_pll *dsspll)
 	struct hdmi_wp_data *wp = pll->wp;
 	u16 r = 0;
 
+	dss_ctrl_pll_enable(DSS_PLL_HDMI, true);
+
 	r = hdmi_wp_set_pll_pwr(wp, HDMI_PLLPWRCMD_BOTHON_ALLCLKS);
 	if (r)
 		return r;
@@ -117,6 +119,8 @@ static void hdmi_pll_disable(struct dss_pll *dsspll)
 	struct hdmi_wp_data *wp = pll->wp;
 
 	hdmi_wp_set_pll_pwr(wp, HDMI_PLLPWRCMD_ALLOFF);
+
+	dss_ctrl_pll_enable(DSS_PLL_HDMI, false);
 }
 
 static const struct dss_pll_ops dsi_pll_ops = {
@@ -185,6 +189,7 @@ static int dsi_init_pll_data(struct platform_device *pdev, struct hdmi_pll_data
 	}
 
 	pll->name = "hdmi";
+	pll->id = DSS_PLL_HDMI;
 	pll->base = hpll->base;
 	pll->clkin = clk;
 
@@ -196,6 +201,7 @@ static int dsi_init_pll_data(struct platform_device *pdev, struct hdmi_pll_data
 		break;
 
 	case OMAPDSS_VER_OMAP5:
+	case OMAPDSS_VER_DRA7xx:
 		pll->hw = &dss_omap5_hdmi_pll_hw;
 		break;
 

drivers/video/fbdev/omap2/dss/omapdss-boot-init.c

@@ -186,6 +186,7 @@ static const struct of_device_id omapdss_of_match[] __initconst = {
 	{ .compatible = "ti,omap3-dss", },
 	{ .compatible = "ti,omap4-dss", },
 	{ .compatible = "ti,omap5-dss", },
+	{ .compatible = "ti,dra7-dss", },
 	{},
 };
 

drivers/video/fbdev/omap2/dss/pll.c

@@ -222,6 +222,16 @@ static int wait_for_bit_change(void __iomem *reg, int bitnum, int value)
 	return !value;
 }
 
+int dss_pll_wait_reset_done(struct dss_pll *pll)
+{
+	void __iomem *base = pll->base;
+
+	if (wait_for_bit_change(base + PLL_STATUS, 0, 1) != 1)
+		return -ETIMEDOUT;
+	else
+		return 0;
+}
+
 static int dss_wait_hsdiv_ack(struct dss_pll *pll, u32 hsdiv_ack_mask)
 {
 	int t = 100;

drivers/video/fbdev/omap2/dss/video-pll.c

+/*
+* Copyright (C) 2014 Texas Instruments Ltd
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License version 2 as published by
+* the Free Software Foundation.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+#include "dss_features.h"
+
+struct dss_video_pll {
+	struct dss_pll pll;
+
+	struct device *dev;
+
+	void __iomem *clkctrl_base;
+};
+
+#define REG_MOD(reg, val, start, end) \
+	writel_relaxed(FLD_MOD(readl_relaxed(reg), val, start, end), reg)
+
+static void dss_dpll_enable_scp_clk(struct dss_video_pll *vpll)
+{
+	REG_MOD(vpll->clkctrl_base, 1, 14, 14); /* CIO_CLK_ICG */
+}
+
+static void dss_dpll_disable_scp_clk(struct dss_video_pll *vpll)
+{
+	REG_MOD(vpll->clkctrl_base, 0, 14, 14); /* CIO_CLK_ICG */
+}
+
+static void dss_dpll_power_enable(struct dss_video_pll *vpll)
+{
+	REG_MOD(vpll->clkctrl_base, 2, 31, 30); /* PLL_POWER_ON_ALL */
+
+	/*
+	 * DRA7x PLL CTRL's PLL_PWR_STATUS seems to always return 0,
+	 * so we have to use fixed delay here.
+	 */
+	msleep(1);
+}
+
+static void dss_dpll_power_disable(struct dss_video_pll *vpll)
+{
+	REG_MOD(vpll->clkctrl_base, 0, 31, 30);	/* PLL_POWER_OFF */
+}
+
+static int dss_video_pll_enable(struct dss_pll *pll)
+{
+	struct dss_video_pll *vpll = container_of(pll, struct dss_video_pll, pll);
+	int r;
+
+	r = dss_runtime_get();
+	if (r)
+		return r;
+
+	dss_ctrl_pll_enable(pll->id, true);
+
+	dss_dpll_enable_scp_clk(vpll);
+
+	r = dss_pll_wait_reset_done(pll);
+	if (r)
+		goto err_reset;
+
+	dss_dpll_power_enable(vpll);
+
+	return 0;
+
+err_reset:
+	dss_dpll_disable_scp_clk(vpll);
+	dss_ctrl_pll_enable(pll->id, false);
+	dss_runtime_put();
+
+	return r;
+}
+
+static void dss_video_pll_disable(struct dss_pll *pll)
+{
+	struct dss_video_pll *vpll = container_of(pll, struct dss_video_pll, pll);
+
+	dss_dpll_power_disable(vpll);
+
+	dss_dpll_disable_scp_clk(vpll);
+
+	dss_ctrl_pll_enable(pll->id, false);
+
+	dss_runtime_put();
+}
+
+static const struct dss_pll_ops dss_pll_ops = {
+	.enable = dss_video_pll_enable,
+	.disable = dss_video_pll_disable,
+	.set_config = dss_pll_write_config_type_a,
+};
+
+static const struct dss_pll_hw dss_dra7_video_pll_hw = {
+	.n_max = (1 << 8) - 1,
+	.m_max = (1 << 12) - 1,
+	.mX_max = (1 << 5) - 1,
+	.fint_min = 500000,
+	.fint_max = 2500000,
+	.clkdco_max = 1800000000,
+
+	.n_msb = 8,
+	.n_lsb = 1,
+	.m_msb = 20,
+	.m_lsb = 9,
+
+	.mX_msb[0] = 25,
+	.mX_lsb[0] = 21,
+	.mX_msb[1] = 30,
+	.mX_lsb[1] = 26,
+
+	.has_refsel = true,
+};
+
+struct dss_pll *dss_video_pll_init(struct platform_device *pdev, int id,
+	struct regulator *regulator)
+{
+	const char * const reg_name[] = { "pll1", "pll2" };
+	const char * const clkctrl_name[] = { "pll1_clkctrl", "pll2_clkctrl" };
+	const char * const clkin_name[] = { "video1_clk", "video2_clk" };
+
+	struct resource *res;
+	struct dss_video_pll *vpll;
+	void __iomem *pll_base, *clkctrl_base;
+	struct clk *clk;
+	struct dss_pll *pll;
+	int r;
+
+	/* PLL CONTROL */
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, reg_name[id]);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"missing platform resource data for pll%d\n", id);
+		return ERR_PTR(-ENODEV);
+	}
+
+	pll_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pll_base)) {
+		dev_err(&pdev->dev, "failed to ioremap pll%d reg_name\n", id);
+		return ERR_CAST(pll_base);
+	}
+
+	/* CLOCK CONTROL */
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+		clkctrl_name[id]);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"missing platform resource data for pll%d\n", id);
+		return ERR_PTR(-ENODEV);
+	}
+
+	clkctrl_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(clkctrl_base)) {
+		dev_err(&pdev->dev, "failed to ioremap pll%d clkctrl\n", id);
+		return ERR_CAST(clkctrl_base);
+	}
+
+	/* CLKIN */
+
+	clk = devm_clk_get(&pdev->dev, clkin_name[id]);
+	if (IS_ERR(clk)) {
+		DSSERR("can't get video pll clkin\n");
+		return ERR_CAST(clk);
+	}
+
+	vpll = devm_kzalloc(&pdev->dev, sizeof(*vpll), GFP_KERNEL);
+	if (!vpll)
+		return ERR_PTR(-ENOMEM);
+
+	vpll->dev = &pdev->dev;
+	vpll->clkctrl_base = clkctrl_base;
+
+	pll = &vpll->pll;
+
+	pll->name = id == 0 ? "video0" : "video1";
+	pll->id = id == 0 ? DSS_PLL_VIDEO1 : DSS_PLL_VIDEO2;
+	pll->clkin = clk;
+	pll->regulator = regulator;
+	pll->base = pll_base;
+	pll->hw = &dss_dra7_video_pll_hw;
+	pll->ops = &dss_pll_ops;
+
+	r = dss_pll_register(pll);
+	if (r)
+		return ERR_PTR(r);
+
+	return pll;
+}
+
+void dss_video_pll_uninit(struct dss_pll *pll)
+{
+	dss_pll_unregister(pll);
+}

drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c

@@ -137,8 +137,11 @@ static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 			goto undo;
 	}
 
-	if (ovl->manager)
-		ovl->manager->apply(ovl->manager);
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			goto undo;
+	}
 
 	if (pi->enabled) {
 		r = ovl->enable(ovl);

drivers/video/fbdev/savage/savagefb.h

@@ -351,32 +351,26 @@ static inline void VGAwSEQ(u8 index, u8 val, struct savagefb_par *par)
 
 static inline void VGAenablePalette(struct savagefb_par *par)
 {
-	u8 tmp;
-
-	tmp = vga_in8(0x3da, par);
+	vga_in8(0x3da, par);
 	vga_out8(0x3c0, 0x00, par);
 	par->paletteEnabled = 1;
 }
 
 static inline void VGAdisablePalette(struct savagefb_par *par)
 {
-	u8 tmp;
-
-	tmp = vga_in8(0x3da, par);
+	vga_in8(0x3da, par);
 	vga_out8(0x3c0, 0x20, par);
 	par->paletteEnabled = 0;
 }
 
 static inline void VGAwATTR(u8 index, u8 value, struct savagefb_par *par)
 {
-	u8 tmp;
-
 	if (par->paletteEnabled)
 		index &= ~0x20;
 	else
 		index |= 0x20;
 
-	tmp = vga_in8(0x3da, par);
+	vga_in8(0x3da, par);
 	vga_out8(0x3c0, index, par);
 	vga_out8 (0x3c0, value, par);
 }

drivers/video/fbdev/ssd1307fb.c

@@ -122,23 +122,6 @@ static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
 	return ret;
 }
 
-static inline int ssd1307fb_write_data(struct i2c_client *client, u8 data)
-{
-	struct ssd1307fb_array *array;
-	int ret;
-
-	array = ssd1307fb_alloc_array(1, SSD1307FB_DATA);
-	if (!array)
-		return -ENOMEM;
-
-	array->data[0] = data;
-
-	ret = ssd1307fb_write_array(client, array, 1);
-	kfree(array);
-
-	return ret;
-}
-
 static void ssd1307fb_update_display(struct ssd1307fb_par *par)
 {
 	struct ssd1307fb_array *array;
@@ -320,7 +303,10 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 
 	/* Set initial contrast */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x7f);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x7f);
 	if (ret < 0)
 		return ret;
 
@@ -336,62 +322,98 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 
 	/* Set multiplex ratio value */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO);
-	ret = ret & ssd1307fb_write_cmd(par->client, par->height - 1);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, par->height - 1);
 	if (ret < 0)
 		return ret;
 
 	/* set display offset value */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET);
+	if (ret < 0)
+		return ret;
+
 	ret = ssd1307fb_write_cmd(par->client, 0x20);
 	if (ret < 0)
 		return ret;
 
 	/* Set clock frequency */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0xf0);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0xf0);
 	if (ret < 0)
 		return ret;
 
 	/* Set precharge period in number of ticks from the internal clock */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x22);
 	if (ret < 0)
 		return ret;
 
 	/* Set COM pins configuration */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x22);
 	if (ret < 0)
 		return ret;
 
 	/* Set VCOMH */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x49);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x49);
 	if (ret < 0)
 		return ret;
 
 	/* Turn on the DC-DC Charge Pump */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x14);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x14);
 	if (ret < 0)
 		return ret;
 
 	/* Switch to horizontal addressing mode */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE);
-	ret = ret & ssd1307fb_write_cmd(par->client,
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client,
 				  SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
 	if (ret < 0)
 		return ret;
 
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
-	ret = ret & ssd1307fb_write_cmd(par->client, par->width - 1);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, par->width - 1);
 	if (ret < 0)
 		return ret;
 
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
-	ret = ret & ssd1307fb_write_cmd(par->client,
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client,
 				  par->page_offset + (par->height / 8) - 1);
 	if (ret < 0)
 		return ret;
@@ -460,7 +482,7 @@ static int ssd1307fb_probe(struct i2c_client *client,
 		par->width = 96;
 
 	if (of_property_read_u32(node, "solomon,height", &par->height))
-		par->width = 16;
+		par->height = 16;
 
 	if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset))
 		par->page_offset = 1;

drivers/video/fbdev/vt8500lcdfb.c

@@ -113,10 +113,8 @@ static int vt8500lcd_set_par(struct fb_info *info)
 	}
 
 	for (i = 0; i < 8; i++) {
-		if (bpp_values[i] == info->var.bits_per_pixel) {
+		if (bpp_values[i] == info->var.bits_per_pixel)
 			reg_bpp = i;
-			continue;
-		}
 	}
 
 	control0 = readl(fbi->regbase) & ~0xf;

include/linux/fb.h

@@ -726,7 +726,9 @@ extern int fb_videomode_from_videomode(const struct videomode *vm,
 				       struct fb_videomode *fbmode);
 
 /* drivers/video/modedb.c */
-#define VESA_MODEDB_SIZE 34
+#define VESA_MODEDB_SIZE 43
+#define DMT_SIZE 0x50
+
 extern void fb_var_to_videomode(struct fb_videomode *mode,
 				const struct fb_var_screeninfo *var);
 extern void fb_videomode_to_var(struct fb_var_screeninfo *var,
@@ -777,9 +779,17 @@ struct fb_videomode {
 	u32 flag;
 };
 
+struct dmt_videomode {
+	u32 dmt_id;
+	u32 std_2byte_code;
+	u32 cvt_3byte_code;
+	const struct fb_videomode *mode;
+};
+
 extern const char *fb_mode_option;
 extern const struct fb_videomode vesa_modes[];
 extern const struct fb_videomode cea_modes[64];
+extern const struct dmt_videomode dmt_modes[];
 
 struct fb_modelist {
 	struct list_head list;

include/video/omapdss.h

@@ -314,6 +314,7 @@ enum omapdss_version {
 	OMAPDSS_VER_OMAP4,		/* All other OMAP4s */
 	OMAPDSS_VER_OMAP5,
 	OMAPDSS_VER_AM43xx,
+	OMAPDSS_VER_DRA7xx,
 };
 
 /* Board specific data */