Commit e0d8bbf0 authored by Juuso Oikarinen's avatar Juuso Oikarinen Committed by John W. Linville

wl1271: Add rudimentary ad-hoc support

This patch adds rudimentary a-hoc support for the driver. It will allow
setting up ad-hoc, and for other devices to scan and join. The beacon and probe
response template setting is slightly dirty, and need to be properly
implemented with support from mac80211. Also, the SSID is not configured to the
firmware - the FW will not be able to respond to probe requests autonomously.
Signed-off-by: default avatarJuuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: default avatarLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: default avatarLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 26a63f6a
...@@ -1139,11 +1139,15 @@ static int wl1271_op_config_interface(struct ieee80211_hw *hw, ...@@ -1139,11 +1139,15 @@ static int wl1271_op_config_interface(struct ieee80211_hw *hw,
static int wl1271_join_channel(struct wl1271 *wl, int channel) static int wl1271_join_channel(struct wl1271 *wl, int channel)
{ {
int ret; int ret = 0;
/* we need to use a dummy BSSID for now */ /* we need to use a dummy BSSID for now */
static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde, static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde,
0xad, 0xbe, 0xef }; 0xad, 0xbe, 0xef };
/* the dummy join is not required for ad-hoc */
if (wl->bss_type == BSS_TYPE_IBSS)
goto out;
/* disable mac filter, so we hear everything */ /* disable mac filter, so we hear everything */
wl->rx_config &= ~CFG_BSSID_FILTER_EN; wl->rx_config &= ~CFG_BSSID_FILTER_EN;
...@@ -1572,6 +1576,42 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, ...@@ -1572,6 +1576,42 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
wl->joined = true; wl->joined = true;
} }
if (wl->bss_type == BSS_TYPE_IBSS) {
/* FIXME: This implements rudimentary ad-hoc support -
proper templates are on the wish list and notification
on when they change. This patch will update the templates
on every call to this function. Also, the firmware will not
answer to probe-requests as it does not have the proper
SSID set in the JOIN command. The probe-response template
is set nevertheless, as the FW will ASSERT without it */
struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
if (beacon) {
struct ieee80211_hdr *hdr;
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON,
beacon->data,
beacon->len);
if (ret < 0) {
dev_kfree_skb(beacon);
goto out_sleep;
}
hdr = (struct ieee80211_hdr *) beacon->data;
hdr->frame_control = cpu_to_le16(
IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_PROBE_RESP);
ret = wl1271_cmd_template_set(wl,
CMD_TEMPL_PROBE_RESPONSE,
beacon->data,
beacon->len);
dev_kfree_skb(beacon);
if (ret < 0)
goto out_sleep;
}
}
if (changed & BSS_CHANGED_ASSOC) { if (changed & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) { if (bss_conf->assoc) {
wl->aid = bss_conf->aid; wl->aid = bss_conf->aid;
...@@ -1857,7 +1897,8 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) ...@@ -1857,7 +1897,8 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
IEEE80211_HW_BEACON_FILTER | IEEE80211_HW_BEACON_FILTER |
IEEE80211_HW_SUPPORTS_PS; IEEE80211_HW_SUPPORTS_PS;
wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
wl->hw->wiphy->max_scan_ssids = 1; wl->hw->wiphy->max_scan_ssids = 1;
wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz; wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment