Skip to content

L
linux
Commit e0da7430 authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch 'PHY-subsystem-kernel-doc' 

Andrew Lunn says:

====================
PHY subsystem kernel doc

The first patches fix existing warnings in the kerneldoc for the PHY
subsystem, and then the 2nd extend the kernel documentation for the
major structures and functions in the PHY subsystem.

v2:
Drop the other fixes which have already been merged.
s/phy/PHY/g
TBI
TypOs
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 3fc826f1 4069a572
Show whitespace changes
Inline Side-by-side
Showing with 404 additions and 135 deletions
Documentation/networking/kapi.rst
View file @ e0da7430
......@@ -134,6 +134,15 @@ PHY Support
.. kernel-doc:: drivers/net/phy/phy.c
:internal:
.. kernel-doc:: drivers/net/phy/phy-core.c
:export:
.. kernel-doc:: drivers/net/phy/phy-c45.c
:export:
.. kernel-doc:: include/linux/phy.h
:internal:
.. kernel-doc:: drivers/net/phy/phy_device.c
:export:
......
drivers/net/phy/phy-core.c
View file @ e0da7430
......@@ -6,6 +6,11 @@
#include <linux/phy.h>
#include <linux/of.h>
/**
* phy_speed_to_str - Return a string representing the PHY link speed
*
* @speed: Speed of the link
*/
const char *phy_speed_to_str(int speed)
{
BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 92,
......@@ -52,6 +57,11 @@ const char *phy_speed_to_str(int speed)
}
EXPORT_SYMBOL_GPL(phy_speed_to_str);
/**
* phy_duplex_to_str - Return string describing the duplex
*
* @duplex: Duplex setting to describe
*/
const char *phy_duplex_to_str(unsigned int duplex)
{
if (duplex == DUPLEX_HALF)
......@@ -252,6 +262,16 @@ static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
return __set_linkmode_max_speed(max_speed, phydev->supported);
}
/**
* phy_set_max_speed - Set the maximum speed the PHY should support
*
* @phydev: The phy_device struct
* @max_speed: Maximum speed
*
* The PHY might be more capable than the MAC. For example a Fast Ethernet
* is connected to a 1G PHY. This function allows the MAC to indicate its
* maximum speed, and so limit what the PHY will advertise.
*/
int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
{
int err;
......@@ -308,6 +328,16 @@ void of_set_phy_eee_broken(struct phy_device *phydev)
phydev->eee_broken_modes = broken;
}
/**
* phy_resolve_aneg_pause - Determine pause autoneg results
*
* @phydev: The phy_device struct
*
* Once autoneg has completed the local pause settings can be
* resolved. Determine if pause and asymmetric pause should be used
* by the MAC.
*/
void phy_resolve_aneg_pause(struct phy_device *phydev)
{
if (phydev->duplex == DUPLEX_FULL) {
......@@ -321,7 +351,7 @@ void phy_resolve_aneg_pause(struct phy_device *phydev)
EXPORT_SYMBOL_GPL(phy_resolve_aneg_pause);
/**
* phy_resolve_aneg_linkmode - resolve the advertisements into phy settings
* phy_resolve_aneg_linkmode - resolve the advertisements into PHY settings
* @phydev: The phy_device struct
*
* Resolve our and the link partner advertisements into their corresponding
......
drivers/net/phy/phy.c
View file @ e0da7430
......@@ -456,7 +456,16 @@ int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
}
EXPORT_SYMBOL(phy_do_ioctl);
/* same as phy_do_ioctl, but ensures that net_device is running */
/**
* phy_do_ioctl_running - generic ndo_do_ioctl implementation but test first
*
* @dev: the net_device struct
* @ifr: &struct ifreq for socket ioctl's
* @cmd: ioctl cmd to execute
*
* Same as phy_do_ioctl, but ensures that net_device is running before
* handling the ioctl.
*/
int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd)
{
if (!netif_running(dev))
......@@ -466,6 +475,12 @@ int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd)
}
EXPORT_SYMBOL(phy_do_ioctl_running);
/**
* phy_queue_state_machine - Trigger the state machine to run soon
*
* @phydev: the phy_device struct
* @jiffies: Run the state machine after these jiffies
*/
void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies)
{
mod_delayed_work(system_power_efficient_wq, &phydev->state_queue,
......@@ -473,6 +488,11 @@ void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies)
}
EXPORT_SYMBOL(phy_queue_state_machine);
/**
* phy_queue_state_machine - Trigger the state machine to run now
*
* @phydev: the phy_device struct
*/
static void phy_trigger_machine(struct phy_device *phydev)
{
phy_queue_state_machine(phydev, 0);
......@@ -489,6 +509,12 @@ static void phy_abort_cable_test(struct phy_device *phydev)
phydev_err(phydev, "Error while aborting cable test");
}
/**
* phy_ethtool_get_strings - Get the statistic counter names
*
* @phydev: the phy_device struct
* @data: Where to put the strings
*/
int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
{
if (!phydev->drv)
......@@ -502,6 +528,11 @@ int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
}
EXPORT_SYMBOL(phy_ethtool_get_strings);
/**
* phy_ethtool_get_sset_count - Get the number of statistic counters
*
* @phydev: the phy_device struct
*/
int phy_ethtool_get_sset_count(struct phy_device *phydev)
{
int ret;
......@@ -523,6 +554,13 @@ int phy_ethtool_get_sset_count(struct phy_device *phydev)
}
EXPORT_SYMBOL(phy_ethtool_get_sset_count);
/**
* phy_ethtool_get_stats - Get the statistic counters
*
* @phydev: the phy_device struct
* @stats: What counters to get
* @data: Where to store the counters
*/
int phy_ethtool_get_stats(struct phy_device *phydev,
struct ethtool_stats *stats, u64 *data)
{
......@@ -537,6 +575,12 @@ int phy_ethtool_get_stats(struct phy_device *phydev,
}
EXPORT_SYMBOL(phy_ethtool_get_stats);
/**
* phy_start_cable_test - Start a cable test
*
* @phydev: the phy_device struct
* @extack: extack for reporting useful error messages
*/
int phy_start_cable_test(struct phy_device *phydev,
struct netlink_ext_ack *extack)
{
......@@ -600,6 +644,13 @@ int phy_start_cable_test(struct phy_device *phydev,
}
EXPORT_SYMBOL(phy_start_cable_test);
/**
* phy_start_cable_test_tdr - Start a raw TDR cable test
*
* @phydev: the phy_device struct
* @extack: extack for reporting useful error messages
* @config: Configuration of the test to run
*/
int phy_start_cable_test_tdr(struct phy_device *phydev,
struct netlink_ext_ack *extack,
const struct phy_tdr_config *config)
......@@ -1363,6 +1414,12 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
}
EXPORT_SYMBOL(phy_ethtool_set_eee);
/**
* phy_ethtool_set_wol - Configure Wake On LAN
*
* @phydev: target phy_device struct
* @wol: Configuration requested
*/
int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
if (phydev->drv && phydev->drv->set_wol)
......@@ -1372,6 +1429,12 @@ int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
}
EXPORT_SYMBOL(phy_ethtool_set_wol);
/**
* phy_ethtool_get_wol - Get the current Wake On LAN configuration
*
* @phydev: target phy_device struct
* @wol: Store the current configuration here
*/
void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
if (phydev->drv && phydev->drv->get_wol)
......@@ -1405,6 +1468,10 @@ int phy_ethtool_set_link_ksettings(struct net_device *ndev,
}
EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);
/**
* phy_ethtool_nway_reset - Restart auto negotiation
* @ndev: Network device to restart autoneg for
*/
int phy_ethtool_nway_reset(struct net_device *ndev)
{
struct phy_device *phydev = ndev->phydev;
......
include/linux/mdio.h
View file @ e0da7430
......@@ -306,7 +306,7 @@ static inline u32 linkmode_adv_to_mii_10gbt_adv_t(unsigned long *advertising)
/**
* mii_10gbt_stat_mod_linkmode_lpa_t
* @advertising: target the linkmode advertisement settings
* @adv: value of the C45 10GBASE-T AN STATUS register
* @lpa: value of the C45 10GBASE-T AN STATUS register
*
* A small helper function that translates C45 10GBASE-T AN STATUS register bits
* to linkmode advertisement settings. Other bits in advertising aren't changed.
......@@ -371,6 +371,7 @@ struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr);
/**
* mdio_module_driver() - Helper macro for registering mdio drivers
* @_mdio_driver: driver to register
*
* Helper macro for MDIO drivers which do not do anything special in module
* init/exit. Each module may only use this macro once, and calling it
......
include/linux/phy.h
View file @ e0da7430
......@@ -82,7 +82,39 @@ extern const int phy_10gbit_features_array[1];
#define PHY_POLL_CABLE_TEST 0x00000004
#define MDIO_DEVICE_IS_PHY 0x80000000
/* Interface Mode definitions */
/**
* enum phy_interface_t - Interface Mode definitions
*
* @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch
* @PHY_INTERFACE_MODE_INTERNAL: No interface, MAC and PHY combined
* @PHY_INTERFACE_MODE_MII: Median-independent interface
* @PHY_INTERFACE_MODE_GMII: Gigabit median-independent interface
* @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface
* @PHY_INTERFACE_MODE_TBI: Ten Bit Interface
* @PHY_INTERFACE_MODE_REVMII: Reverse Media Independent Interface
* @PHY_INTERFACE_MODE_RMII: Reduced Media Independent Interface
* @PHY_INTERFACE_MODE_RGMII: Reduced gigabit media-independent interface
* @PHY_INTERFACE_MODE_RGMII_ID: RGMII with Internal RX+TX delay
* @PHY_INTERFACE_MODE_RGMII_RXID: RGMII with Internal RX delay
* @PHY_INTERFACE_MODE_RGMII_TXID: RGMII with Internal RX delay
* @PHY_INTERFACE_MODE_RTBI: Reduced TBI
* @PHY_INTERFACE_MODE_SMII: ??? MII
* @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface
* @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface
* @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax
* @PHY_INTERFACE_MODE_QSGMII: Quad SGMII
* @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII
* @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX
* @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX
* @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI
* @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface
* @PHY_INTERFACE_MODE_10GBASER: 10G BaseR
* @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII
* @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN
* @PHY_INTERFACE_MODE_MAX: Book keeping
*
* Describes the interface between the MAC and PHY.
*/
typedef enum {
PHY_INTERFACE_MODE_NA,
PHY_INTERFACE_MODE_INTERNAL,
......@@ -116,8 +148,8 @@ typedef enum {
} phy_interface_t;
/**
* phy_supported_speeds - return all speeds currently supported by a phy device
* @phy: The phy device to return supported speeds of.
* phy_supported_speeds - return all speeds currently supported by a PHY device
* @phy: The PHY device to return supported speeds of.
* @speeds: buffer to store supported speeds in.
* @size: size of speeds buffer.
*
......@@ -134,9 +166,9 @@ unsigned int phy_supported_speeds(struct phy_device *phy,
* phy_modes - map phy_interface_t enum to device tree binding of phy-mode
* @interface: enum phy_interface_t value
*
* Description: maps 'enum phy_interface_t' defined in this file
* Description: maps enum &phy_interface_t defined in this file
* into the device tree binding of 'phy-mode', so that Ethernet
* device driver can get phy interface from device tree.
* device driver can get PHY interface from device tree.
*/
static inline const char *phy_modes(phy_interface_t interface)
{
......@@ -215,6 +247,14 @@ struct sfp_bus;
struct sfp_upstream_ops;
struct sk_buff;
/**
* struct mdio_bus_stats - Statistics counters for MDIO busses
* @transfers: Total number of transfers, i.e. @writes + @reads
* @errors: Number of MDIO transfers that returned an error
* @writes: Number of write transfers
* @reads: Number of read transfers
* @syncp: Synchronisation for incrementing statistics
*/
struct mdio_bus_stats {
u64_stats_t transfers;
u64_stats_t errors;
......@@ -224,7 +264,15 @@ struct mdio_bus_stats {
struct u64_stats_sync syncp;
};
/* Represents a shared structure between different phydev's in the same
/**
* struct phy_package_shared - Shared information in PHY packages
* @addr: Common PHY address used to combine PHYs in one package
* @refcnt: Number of PHYs connected to this shared data
* @flags: Initialization of PHY package
* @priv_size: Size of the shared private data @priv
* @priv: Driver private data shared across a PHY package
*
* Represents a shared structure between different phydev's in the same
* package, for example a quad PHY. See phy_package_join() and
* phy_package_leave().
*/
......@@ -247,7 +295,14 @@ struct phy_package_shared {
#define PHY_SHARED_F_INIT_DONE 0
#define PHY_SHARED_F_PROBE_DONE 1
/*
/**
* struct mii_bus - Represents an MDIO bus
*
* @owner: Who owns this device
* @name: User friendly name for this MDIO device, or driver name
* @id: Unique identifier for this bus, typical from bus hierarchy
* @priv: Driver private data
*
* The Bus class for PHYs. Devices which provide access to
* PHYs should register using this structure
*/
......@@ -256,49 +311,58 @@ struct mii_bus {
const char *name;
char id[MII_BUS_ID_SIZE];
void *priv;
/** @read: Perform a read transfer on the bus */
int (*read)(struct mii_bus *bus, int addr, int regnum);
/** @write: Perform a write transfer on the bus */
int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val);
/** @reset: Perform a reset of the bus */
int (*reset)(struct mii_bus *bus);
/** @stats: Statistic counters per device on the bus */
struct mdio_bus_stats stats[PHY_MAX_ADDR];
/*
* A lock to ensure that only one thing can read/write
/**
* @mdio_lock: A lock to ensure that only one thing can read/write
* the MDIO bus at a time
*/
struct mutex mdio_lock;
/** @parent: Parent device of this bus */
struct device *parent;
/** @state: State of bus structure */
enum {
MDIOBUS_ALLOCATED = 1,
MDIOBUS_REGISTERED,
MDIOBUS_UNREGISTERED,
MDIOBUS_RELEASED,
} state;
/** @dev: Kernel device representation */
struct device dev;
/* list of all PHYs on bus */
/** @mdio_map: list of all MDIO devices on bus */
struct mdio_device *mdio_map[PHY_MAX_ADDR];
/* PHY addresses to be ignored when probing */
/** @phy_mask: PHY addresses to be ignored when probing */
u32 phy_mask;
/* PHY addresses to ignore the TA/read failure */
/** @phy_ignore_ta_mask: PHY addresses to ignore the TA/read failure */
u32 phy_ignore_ta_mask;
/*
* An array of interrupts, each PHY's interrupt at the index
/**
* @irq: An array of interrupts, each PHY's interrupt at the index
* matching its address
*/
int irq[PHY_MAX_ADDR];
/* GPIO reset pulse width in microseconds */
/** @reset_delay_us: GPIO reset pulse width in microseconds */
int reset_delay_us;
/* GPIO reset deassert delay in microseconds */
/** @reset_post_delay_us: GPIO reset deassert delay in microseconds */
int reset_post_delay_us;
/* RESET GPIO descriptor pointer */
/** @reset_gpiod: Reset GPIO descriptor pointer */
struct gpio_desc *reset_gpiod;
/* bus capabilities, used for probing */
/** @probe_capabilities: bus capabilities, used for probing */
enum {
MDIOBUS_NO_CAP = 0,
MDIOBUS_C22,
......@@ -306,15 +370,22 @@ struct mii_bus {
MDIOBUS_C22_C45,
} probe_capabilities;
/* protect access to the shared element */
/** @shared_lock: protect access to the shared element */
struct mutex shared_lock;
/* shared state across different PHYs */
/** @shared: shared state across different PHYs */
struct phy_package_shared *shared[PHY_MAX_ADDR];
};
#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
struct mii_bus *mdiobus_alloc_size(size_t);
struct mii_bus *mdiobus_alloc_size(size_t size);
/**
* mdiobus_alloc - Allocate an MDIO bus structure
*
* The internal state of the MDIO bus will be set of MDIOBUS_ALLOCATED ready
* for the driver to register the bus.
*/
static inline struct mii_bus *mdiobus_alloc(void)
{
return mdiobus_alloc_size(0);
......@@ -341,40 +412,41 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
#define PHY_INTERRUPT_DISABLED false
#define PHY_INTERRUPT_ENABLED true
/* PHY state machine states:
/**
* enum phy_state - PHY state machine states:
*
* DOWN: PHY device and driver are not ready for anything. probe
* @PHY_DOWN: PHY device and driver are not ready for anything. probe
* should be called if and only if the PHY is in this state,
* given that the PHY device exists.
* - PHY driver probe function will set the state to READY
* - PHY driver probe function will set the state to @PHY_READY
*
* READY: PHY is ready to send and receive packets, but the
* @PHY_READY: PHY is ready to send and receive packets, but the
* controller is not. By default, PHYs which do not implement
* probe will be set to this state by phy_probe().
* - start will set the state to UP
*
* UP: The PHY and attached device are ready to do work.
* @PHY_UP: The PHY and attached device are ready to do work.
* Interrupts should be started here.
* - timer moves to NOLINK or RUNNING
* - timer moves to @PHY_NOLINK or @PHY_RUNNING
*
* NOLINK: PHY is up, but not currently plugged in.
* - irq or timer will set RUNNING if link comes back
* - phy_stop moves to HALTED
* @PHY_NOLINK: PHY is up, but not currently plugged in.
* - irq or timer will set @PHY_RUNNING if link comes back
* - phy_stop moves to @PHY_HALTED
*
* RUNNING: PHY is currently up, running, and possibly sending
* @PHY_RUNNING: PHY is currently up, running, and possibly sending
* and/or receiving packets
* - irq or timer will set NOLINK if link goes down
* - phy_stop moves to HALTED
* - irq or timer will set @PHY_NOLINK if link goes down
* - phy_stop moves to @PHY_HALTED
*
* CABLETEST: PHY is performing a cable test. Packet reception/sending
* @PHY_CABLETEST: PHY is performing a cable test. Packet reception/sending
* is not expected to work, carrier will be indicated as down. PHY will be
* poll once per second, or on interrupt for it current state.
* Once complete, move to UP to restart the PHY.
* - phy_stop aborts the running test and moves to HALTED
* - phy_stop aborts the running test and moves to @PHY_HALTED
*
* HALTED: PHY is up, but no polling or interrupts are done. Or
* @PHY_HALTED: PHY is up, but no polling or interrupts are done. Or
* PHY is in an error state.
* - phy_start moves to UP
* - phy_start moves to @PHY_UP
*/
enum phy_state {
PHY_DOWN = 0,
......@@ -403,34 +475,67 @@ struct phy_c45_device_ids {
struct macsec_context;
struct macsec_ops;
/* phy_device: An instance of a PHY
/**
* struct phy_device - An instance of a PHY
*
* drv: Pointer to the driver for this PHY instance
* phy_id: UID for this device found during discovery
* c45_ids: 802.3-c45 Device Identifers if is_c45.
* is_c45: Set to true if this phy uses clause 45 addressing.
* is_internal: Set to true if this phy is internal to a MAC.
* is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc.
* is_gigabit_capable: Set to true if PHY supports 1000Mbps
* has_fixups: Set to true if this phy has fixups/quirks.
* suspended: Set to true if this phy has been suspended successfully.
* suspended_by_mdio_bus: Set to true if this phy was suspended by MDIO bus.
* sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal.
* loopback_enabled: Set true if this phy has been loopbacked successfully.
* downshifted_rate: Set true if link speed has been downshifted.
* state: state of the PHY for management purposes
* dev_flags: Device-specific flags used by the PHY driver.
* irq: IRQ number of the PHY's interrupt (-1 if none)
* phy_timer: The timer for handling the state machine
* sfp_bus_attached: flag indicating whether the SFP bus has been attached
* sfp_bus: SFP bus attached to this PHY's fiber port
* attached_dev: The attached enet driver's device instance ptr
* adjust_link: Callback for the enet controller to respond to
* changes in the link state.
* macsec_ops: MACsec offloading ops.
* @mdio: MDIO bus this PHY is on
* @drv: Pointer to the driver for this PHY instance
* @phy_id: UID for this device found during discovery
* @c45_ids: 802.3-c45 Device Identifiers if is_c45.
* @is_c45: Set to true if this PHY uses clause 45 addressing.
* @is_internal: Set to true if this PHY is internal to a MAC.
* @is_pseudo_fixed_link: Set to true if this PHY is an Ethernet switch, etc.
* @is_gigabit_capable: Set to true if PHY supports 1000Mbps
* @has_fixups: Set to true if this PHY has fixups/quirks.
* @suspended: Set to true if this PHY has been suspended successfully.
* @suspended_by_mdio_bus: Set to true if this PHY was suspended by MDIO bus.
* @sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal.
* @loopback_enabled: Set true if this PHY has been loopbacked successfully.
* @downshifted_rate: Set true if link speed has been downshifted.
* @state: State of the PHY for management purposes
* @dev_flags: Device-specific flags used by the PHY driver.
* @irq: IRQ number of the PHY's interrupt (-1 if none)
* @phy_timer: The timer for handling the state machine
* @phylink: Pointer to phylink instance for this PHY
* @sfp_bus_attached: Flag indicating whether the SFP bus has been attached
* @sfp_bus: SFP bus attached to this PHY's fiber port
* @attached_dev: The attached enet driver's device instance ptr
* @adjust_link: Callback for the enet controller to respond to changes: in the
* link state.
* @phy_link_change: Callback for phylink for notification of link change
* @macsec_ops: MACsec offloading ops.
*
* speed, duplex, pause, supported, advertising, lp_advertising,
* and autoneg are used like in mii_if_info
* @speed: Current link speed
* @duplex: Current duplex
* @pause: Current pause
* @asym_pause: Current asymmetric pause
* @supported: Combined MAC/PHY supported linkmodes
* @advertising: Currently advertised linkmodes
* @adv_old: Saved advertised while power saving for WoL
* @lp_advertising: Current link partner advertised linkmodes
* @eee_broken_modes: Energy efficient ethernet modes which should be prohibited
* @autoneg: Flag autoneg being used
* @link: Current link state
* @autoneg_complete: Flag auto negotiation of the link has completed
* @mdix: Current crossover
* @mdix_ctrl: User setting of crossover
* @interrupts: Flag interrupts have been enabled
* @interface: enum phy_interface_t value
* @skb: Netlink message for cable diagnostics
* @nest: Netlink nest used for cable diagnostics
* @ehdr: nNtlink header for cable diagnostics
* @phy_led_triggers: Array of LED triggers
* @phy_num_led_triggers: Number of triggers in @phy_led_triggers
* @led_link_trigger: LED trigger for link up/down
* @last_triggered: last LED trigger for link speed
* @master_slave_set: User requested master/slave configuration
* @master_slave_get: Current master/slave advertisement
* @master_slave_state: Current master/slave configuration
* @mii_ts: Pointer to time stamper callbacks
* @lock: Mutex for serialization access to PHY
* @state_queue: Work queue for state machine
* @shared: Pointer to private data shared by phys in one package
* @priv: Pointer to driver private data
*
* interrupts currently only supports enabled or disabled,
* but could be changed in the future to support enabling
......@@ -550,9 +655,18 @@ struct phy_device {
#define to_phy_device(d) container_of(to_mdio_device(d), \
struct phy_device, mdio)
/* A structure containing possible configuration parameters
/**
* struct phy_tdr_config - Configuration of a TDR raw test
*
* @first: Distance for first data collection point
* @last: Distance for last data collection point
* @step: Step between data collection points
* @pair: Bitmap of cable pairs to collect data for
*
* A structure containing possible configuration parameters
* for a TDR cable test. The driver does not need to implement
* all the parameters, but should report what is actually used.
* All distances are in centimeters.
*/
struct phy_tdr_config {
u32 first;
......@@ -562,18 +676,20 @@ struct phy_tdr_config {
};
#define PHY_PAIR_ALL -1
/* struct phy_driver: Driver structure for a particular PHY type
/**
* struct phy_driver - Driver structure for a particular PHY type
*
* driver_data: static driver data
* phy_id: The result of reading the UID registers of this PHY
* @mdiodrv: Data common to all MDIO devices
* @phy_id: The result of reading the UID registers of this PHY
* type, and ANDing them with the phy_id_mask. This driver
* only works for PHYs with IDs which match this field
* name: The friendly name of this PHY type
* phy_id_mask: Defines the important bits of the phy_id
* features: A mandatory list of features (speed, duplex, etc)
* @name: The friendly name of this PHY type
* @phy_id_mask: Defines the important bits of the phy_id
* @features: A mandatory list of features (speed, duplex, etc)
* supported by this PHY
* flags: A bitfield defining certain other features this PHY
* @flags: A bitfield defining certain other features this PHY
* supports (like interrupts)
* @driver_data: Static driver data
*
* All functions are optional. If config_aneg or read_status
* are not implemented, the phy core uses the genphy versions.
......@@ -592,151 +708,178 @@ struct phy_driver {
u32 flags;
const void *driver_data;
/*
* Called to issue a PHY software reset
/**
* @soft_reset: Called to issue a PHY software reset
*/
int (*soft_reset)(struct phy_device *phydev);
/*
* Called to initialize the PHY,
/**
* @config_init: Called to initialize the PHY,
* including after a reset
*/
int (*config_init)(struct phy_device *phydev);
/*
* Called during discovery. Used to set
/**
* @probe: Called during discovery. Used to set
* up device-specific structures, if any
*/
int (*probe)(struct phy_device *phydev);
/*
* Probe the hardware to determine what abilities it has.
* Should only set phydev->supported.
/**
* @get_features: Probe the hardware to determine what
* abilities it has. Should only set phydev->supported.
*/
int (*get_features)(struct phy_device *phydev);
/* PHY Power Management */
/** @suspend: Suspend the hardware, saving state if needed */
int (*suspend)(struct phy_device *phydev);
/** @resume: Resume the hardware, restoring state if needed */
int (*resume)(struct phy_device *phydev);
/*
* Configures the advertisement and resets
/**
* @config_aneg: Configures the advertisement and resets
* autonegotiation if phydev->autoneg is on,
* forces the speed to the current settings in phydev
* if phydev->autoneg is off
*/
int (*config_aneg)(struct phy_device *phydev);
/* Determines the auto negotiation result */
/** @aneg_done: Determines the auto negotiation result */
int (*aneg_done)(struct phy_device *phydev);
/* Determines the negotiated speed and duplex */
/** @read_status: Determines the negotiated speed and duplex */
int (*read_status)(struct phy_device *phydev);
/* Clears any pending interrupts */
/** @ack_interrupt: Clears any pending interrupts */
int (*ack_interrupt)(struct phy_device *phydev);
/* Enables or disables interrupts */
/** @config_intr: Enables or disables interrupts */
int (*config_intr)(struct phy_device *phydev);
/*
* Checks if the PHY generated an interrupt.
/**
* @did_interrupt: Checks if the PHY generated an interrupt.
* For multi-PHY devices with shared PHY interrupt pin
* Set interrupt bits have to be cleared.
*/
int (*did_interrupt)(struct phy_device *phydev);
/* Override default interrupt handling */
/** @handle_interrupt: Override default interrupt handling */
irqreturn_t (*handle_interrupt)(struct phy_device *phydev);
/* Clears up any memory if needed */
/** @remove: Clears up any memory if needed */
void (*remove)(struct phy_device *phydev);
/* Returns true if this is a suitable driver for the given
* phydev. If NULL, matching is based on phy_id and
* phy_id_mask.
/**
* @match_phy_device: Returns true if this is a suitable
* driver for the given phydev. If NULL, matching is based on
* phy_id and phy_id_mask.
*/
int (*match_phy_device)(struct phy_device *phydev);
/* Some devices (e.g. qnap TS-119P II) require PHY register changes to
* enable Wake on LAN, so set_wol is provided to be called in the
* ethernet driver's set_wol function. */
/**
* @set_wol: Some devices (e.g. qnap TS-119P II) require PHY
* register changes to enable Wake on LAN, so set_wol is
* provided to be called in the ethernet driver's set_wol
* function.
*/
int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
/* See set_wol, but for checking whether Wake on LAN is enabled. */
/**
* @get_wol: See set_wol, but for checking whether Wake on LAN
* is enabled.
*/
void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
/*
* Called to inform a PHY device driver when the core is about to
* change the link state. This callback is supposed to be used as
* fixup hook for drivers that need to take action when the link
* state changes. Drivers are by no means allowed to mess with the
/**
* @link_change_notify: Called to inform a PHY device driver
* when the core is about to change the link state. This
* callback is supposed to be used as fixup hook for drivers
* that need to take action when the link state
* changes. Drivers are by no means allowed to mess with the
* PHY device structure in their implementations.
*/
void (*link_change_notify)(struct phy_device *dev);
/*
* Phy specific driver override for reading a MMD register.
* This function is optional for PHY specific drivers. When
* not provided, the default MMD read function will be used
* by phy_read_mmd(), which will use either a direct read for
* Clause 45 PHYs or an indirect read for Clause 22 PHYs.
* devnum is the MMD device number within the PHY device,
* regnum is the register within the selected MMD device.
/**
* @read_mmd: PHY specific driver override for reading a MMD
* register. This function is optional for PHY specific
* drivers. When not provided, the default MMD read function
* will be used by phy_read_mmd(), which will use either a
* direct read for Clause 45 PHYs or an indirect read for
* Clause 22 PHYs. devnum is the MMD device number within the
* PHY device, regnum is the register within the selected MMD
* device.
*/
int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum);
/*
* Phy specific driver override for writing a MMD register.
* This function is optional for PHY specific drivers. When
* not provided, the default MMD write function will be used
* by phy_write_mmd(), which will use either a direct write for
* Clause 45 PHYs, or an indirect write for Clause 22 PHYs.
* devnum is the MMD device number within the PHY device,
* regnum is the register within the selected MMD device.
* val is the value to be written.
/**
* @write_mmd: PHY specific driver override for writing a MMD
* register. This function is optional for PHY specific
* drivers. When not provided, the default MMD write function
* will be used by phy_write_mmd(), which will use either a
* direct write for Clause 45 PHYs, or an indirect write for
* Clause 22 PHYs. devnum is the MMD device number within the
* PHY device, regnum is the register within the selected MMD
* device. val is the value to be written.
*/
int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum,
u16 val);
/** @read_page: Return the current PHY register page number */
int (*read_page)(struct phy_device *dev);
/** @write_page: Set the current PHY register page number */
int (*write_page)(struct phy_device *dev, int page);
/* Get the size and type of the eeprom contained within a plug-in
* module */
/**
* @module_info: Get the size and type of the eeprom contained
* within a plug-in module
*/
int (*module_info)(struct phy_device *dev,
struct ethtool_modinfo *modinfo);
/* Get the eeprom information from the plug-in module */
/**
* @module_eeprom: Get the eeprom information from the plug-in
* module
*/
int (*module_eeprom)(struct phy_device *dev,
struct ethtool_eeprom *ee, u8 *data);
/* Start a cable test */
/** @cable_test_start: Start a cable test */
int (*cable_test_start)(struct phy_device *dev);
/* Start a raw TDR cable test */
/** @cable_test_tdr_start: Start a raw TDR cable test */
int (*cable_test_tdr_start)(struct phy_device *dev,
const struct phy_tdr_config *config);
/* Once per second, or on interrupt, request the status of the
* test.
/**
* @cable_test_get_status: Once per second, or on interrupt,
* request the status of the test.
*/
int (*cable_test_get_status)(struct phy_device *dev, bool *finished);
/* Get statistics from the phy using ethtool */
/* Get statistics from the PHY using ethtool */
/** @get_sset_count: Number of statistic counters */
int (*get_sset_count)(struct phy_device *dev);
/** @get_strings: Names of the statistic counters */
void (*get_strings)(struct phy_device *dev, u8 *data);
/** @get_stats: Return the statistic counter values */
void (*get_stats)(struct phy_device *dev,
struct ethtool_stats *stats, u64 *data);
/* Get and Set PHY tunables */
/** @get_tunable: Return the value of a tunable */
int (*get_tunable)(struct phy_device *dev,
struct ethtool_tunable *tuna, void *data);
/** @set_tunable: Set the value of a tunable */
int (*set_tunable)(struct phy_device *dev,
struct ethtool_tunable *tuna,
const void *data);
/** @set_loopback: Set the loopback mood of the PHY */
int (*set_loopback)(struct phy_device *dev, bool enable);
/** @get_sqi: Get the signal quality indication */
int (*get_sqi)(struct phy_device *dev);
/** @get_sqi_max: Get the maximum signal quality indication */
int (*get_sqi_max)(struct phy_device *dev);
};
#define to_phy_driver(d) container_of(to_mdio_common_driver(d), \
......@@ -890,6 +1033,24 @@ static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum,
*/
int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
/**
* phy_read_mmd_poll_timeout - Periodically poll a PHY register until a
* condition is met or a timeout occurs
*
* @phydev: The phy_device struct
* @devaddr: The MMD to read from
* @regnum: The register on the MMD to read
* @val: Variable to read the register into
* @cond: Break condition (usually involving @val)
* @sleep_us: Maximum time to sleep between reads in us (0
* tight-loops). Should be less than ~20ms since usleep_range
* is used (see Documentation/timers/timers-howto.rst).
* @timeout_us: Timeout in us, 0 means never timeout
* @sleep_before_read: if it is true, sleep @sleep_us before read.
* Returns 0 on success and -ETIMEDOUT upon a timeout. In either
* case, the last read value at @args is stored in @val. Must not
* be called from atomic context if sleep_us or timeout_us are used.
*/
#define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \
sleep_us, timeout_us, sleep_before_read) \
({ \
......@@ -1161,7 +1322,7 @@ static inline bool phy_is_internal(struct phy_device *phydev)
/**
* phy_interface_mode_is_rgmii - Convenience function for testing if a
* PHY interface mode is RGMII (all variants)
* @mode: the phy_interface_t enum
* @mode: the &phy_interface_t enum
*/
static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode)
{
......@@ -1170,11 +1331,11 @@ static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode)
};
/**
* phy_interface_mode_is_8023z() - does the phy interface mode use 802.3z
* phy_interface_mode_is_8023z() - does the PHY interface mode use 802.3z
* negotiation
* @mode: one of &enum phy_interface_t
*
* Returns true if the phy interface mode uses the 16-bit negotiation
* Returns true if the PHY interface mode uses the 16-bit negotiation
* word as defined in 802.3z. (See 802.3-2015 37.2.1 Config_Reg encoding)
*/
static inline bool phy_interface_mode_is_8023z(phy_interface_t mode)
......@@ -1193,7 +1354,7 @@ static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
return phy_interface_mode_is_rgmii(phydev->interface);
};
/*
/**
* phy_is_pseudo_fixed_link - Convenience function for testing if this
* PHY is the CPU port facing side of an Ethernet switch, or similar.
* @phydev: the phy_device struct
......@@ -1566,8 +1727,9 @@ static inline int mdiobus_register_board_info(const struct mdio_board_info *i,
/**
* module_phy_driver() - Helper macro for registering PHY drivers
* phy_module_driver() - Helper macro for registering PHY drivers
* @__phy_drivers: array of PHY drivers to register
* @__count: Numbers of members in array
*
* Helper macro for PHY drivers which do not do anything special in module
* init/exit. Each module may only use this macro once, and calling it
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7